Psychological resilience: the role of unconscious and conscious coping strategies in the mediation of stress in high risk occupational contexts
- Authors: Alexander, Debra Geraldine
- Date: 2002
- Subjects: Hazardous occupations , Teachers -- South Africa -- Job stress , Police -- South Africa -- Job stress , Emergency medical personnel -- South Africa -- Job stress , Stress (Psychology)
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:3092 , http://hdl.handle.net/10962/d1003059 , Hazardous occupations , Teachers -- South Africa -- Job stress , Police -- South Africa -- Job stress , Emergency medical personnel -- South Africa -- Job stress , Stress (Psychology)
- Description: This study investigates the role of unconscious and conscious coping strategies in the mediation of stress in high risk occupational contexts. The Social Readjustment Rating Scale, the Multidimensional Coping Inventory and the Defense Style Questionnaires were completed by 194 police, ambulance and teaching personnel. A sample of 37 teachers served as a non high risk occupation control group. Descriptive statistics, regression analysis, analysis of variance, analysis of difference and principal component analysis were performed on the data. Results indicated minimal significant between group differences. Within group variances were yielded. A minor relationship between levels of stress and usage of positive and negative mechanisms was observed. The significance of these findings is discussed and recommendations made for further study.
- Full Text:
- Date Issued: 2002
- Authors: Alexander, Debra Geraldine
- Date: 2002
- Subjects: Hazardous occupations , Teachers -- South Africa -- Job stress , Police -- South Africa -- Job stress , Emergency medical personnel -- South Africa -- Job stress , Stress (Psychology)
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:3092 , http://hdl.handle.net/10962/d1003059 , Hazardous occupations , Teachers -- South Africa -- Job stress , Police -- South Africa -- Job stress , Emergency medical personnel -- South Africa -- Job stress , Stress (Psychology)
- Description: This study investigates the role of unconscious and conscious coping strategies in the mediation of stress in high risk occupational contexts. The Social Readjustment Rating Scale, the Multidimensional Coping Inventory and the Defense Style Questionnaires were completed by 194 police, ambulance and teaching personnel. A sample of 37 teachers served as a non high risk occupation control group. Descriptive statistics, regression analysis, analysis of variance, analysis of difference and principal component analysis were performed on the data. Results indicated minimal significant between group differences. Within group variances were yielded. A minor relationship between levels of stress and usage of positive and negative mechanisms was observed. The significance of these findings is discussed and recommendations made for further study.
- Full Text:
- Date Issued: 2002
The development of a marketing plan for an emergency medical service
- Authors: Barley, Kim Wayne
- Date: 2002
- Subjects: Market -- Planning , Emergency medical services , Health facilities -- South Africa
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10853 , http://hdl.handle.net/10948/120 , Market -- Planning , Emergency medical services , Health facilities -- South Africa
- Description: The research problem addressed in this study was to develop a comprehensive marketing plan that would help an emergency medical service (EMS) in the Nelson Mandela Metropolitan Municipality (NMMM), capture a significant market share and gain a competitive advantage over competitors. To achieve this object, a literature study to determine the key components of a marketing plan was undertaken and used as a theoretical model in developing an actual marketing plan. In addition to the literature study, an empirical study was conducted to identify the key issues critical to the development of a marketing plan for the EMS. The survey method used, based on the key components gained from the literature study, consisted of an in-depth scan of the macro-environment and thorough market investigation of the target industry. The investigation involved the general management and senior personnel from the local emergency medical industry, medical aid schemes and private hospitals and clinics delimited in the study. The results of the above literature study were finally combined with the results of the empirical study and a marketing plan for an emergency medical service was developed. This study concludes with recommendations applicable for the implementation of the actual marketing plan.
- Full Text:
- Date Issued: 2002
- Authors: Barley, Kim Wayne
- Date: 2002
- Subjects: Market -- Planning , Emergency medical services , Health facilities -- South Africa
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10853 , http://hdl.handle.net/10948/120 , Market -- Planning , Emergency medical services , Health facilities -- South Africa
- Description: The research problem addressed in this study was to develop a comprehensive marketing plan that would help an emergency medical service (EMS) in the Nelson Mandela Metropolitan Municipality (NMMM), capture a significant market share and gain a competitive advantage over competitors. To achieve this object, a literature study to determine the key components of a marketing plan was undertaken and used as a theoretical model in developing an actual marketing plan. In addition to the literature study, an empirical study was conducted to identify the key issues critical to the development of a marketing plan for the EMS. The survey method used, based on the key components gained from the literature study, consisted of an in-depth scan of the macro-environment and thorough market investigation of the target industry. The investigation involved the general management and senior personnel from the local emergency medical industry, medical aid schemes and private hospitals and clinics delimited in the study. The results of the above literature study were finally combined with the results of the empirical study and a marketing plan for an emergency medical service was developed. This study concludes with recommendations applicable for the implementation of the actual marketing plan.
- Full Text:
- Date Issued: 2002
Broken vessels : the im-possibility of the art of remembrance and re-collection in the work of Anselm Kiefer, Christian Boltanski, William Kentridge and Santu Mofokeng
- Authors: Belluigi, Dina Zoe
- Date: 2002
- Subjects: History in art Kiefer, Anselm, 1945- Boltanski, Christian, 1944- Kentridge, William, 1955- Mofokeng, Santu, 1956-
- Language: English
- Type: Thesis , Masters , MFA
- Identifier: vital:2395 , http://hdl.handle.net/10962/d1002191
- Description: This thesis is structured around investigating the philosophical and aesthetic problematics, politics, and possibilities of representing the past for the purposes of demythifying the present as well as commemorating the losses of history, as explored in the artworks of Anselm Kiefer, Christian Boltanski, William Kentridge and Santu Mofokeng. The first chapter begins with Theodor Adorno’s philosophical understanding of myth and history: how he is influenced by and then develops Karl Marx’s critique of society, Sigmund Freud’s critique of reason and its subject, and particularly Walter Benjamin’s ideas of history as catastrophe, the role of the historian and his messianic materialism. The second section looks at Theodor Adorno’s dialectic of art and society: immanent criticism in aesthetic practice, mimesis, and the shift in conceptions of allegory from Walter Benjamin’s understanding to that of Jacques Derrida. The last section of the chapter looks at Jacques Derrida’s poststructuralist theories against boundary-fixing, within that the ethical relation to the ‘other’ and the theorist/artist as psychic exile. The second chapter deals with the politics of remembrance and representation — beginning with Theodor Adorno’s historic interpretation of the Mosaic law against the making of images and Jean-Francois Lyotard on the im-possibility of representing the unrepresentable. The chapter is divided in two parts between the post-Holocaust European artists Anselm Kiefer and Christian Boltanski, and the post-apartheid South African artists William Kentridge and Santu Mofokeng. It explores, within these artists’ specific contexts, their formal and philosophical approaches to myth and history, and the problematics of image-making, representing the unrepresentable, and commemorating the immemorial. The thesis concludes by considering different conceptions of melancholia as they relate to these artists: the Freudian psychoanalytic approach, Benjamin’s notions of the artist-genius, and Julia Kristeva’s Lacanian reading of the humanist melancholic, concluding with the mythic-historical Kaballist notion of melancholia as the historical burden or responsibility to commemorate loss.
- Full Text:
- Date Issued: 2002
- Authors: Belluigi, Dina Zoe
- Date: 2002
- Subjects: History in art Kiefer, Anselm, 1945- Boltanski, Christian, 1944- Kentridge, William, 1955- Mofokeng, Santu, 1956-
- Language: English
- Type: Thesis , Masters , MFA
- Identifier: vital:2395 , http://hdl.handle.net/10962/d1002191
- Description: This thesis is structured around investigating the philosophical and aesthetic problematics, politics, and possibilities of representing the past for the purposes of demythifying the present as well as commemorating the losses of history, as explored in the artworks of Anselm Kiefer, Christian Boltanski, William Kentridge and Santu Mofokeng. The first chapter begins with Theodor Adorno’s philosophical understanding of myth and history: how he is influenced by and then develops Karl Marx’s critique of society, Sigmund Freud’s critique of reason and its subject, and particularly Walter Benjamin’s ideas of history as catastrophe, the role of the historian and his messianic materialism. The second section looks at Theodor Adorno’s dialectic of art and society: immanent criticism in aesthetic practice, mimesis, and the shift in conceptions of allegory from Walter Benjamin’s understanding to that of Jacques Derrida. The last section of the chapter looks at Jacques Derrida’s poststructuralist theories against boundary-fixing, within that the ethical relation to the ‘other’ and the theorist/artist as psychic exile. The second chapter deals with the politics of remembrance and representation — beginning with Theodor Adorno’s historic interpretation of the Mosaic law against the making of images and Jean-Francois Lyotard on the im-possibility of representing the unrepresentable. The chapter is divided in two parts between the post-Holocaust European artists Anselm Kiefer and Christian Boltanski, and the post-apartheid South African artists William Kentridge and Santu Mofokeng. It explores, within these artists’ specific contexts, their formal and philosophical approaches to myth and history, and the problematics of image-making, representing the unrepresentable, and commemorating the immemorial. The thesis concludes by considering different conceptions of melancholia as they relate to these artists: the Freudian psychoanalytic approach, Benjamin’s notions of the artist-genius, and Julia Kristeva’s Lacanian reading of the humanist melancholic, concluding with the mythic-historical Kaballist notion of melancholia as the historical burden or responsibility to commemorate loss.
- Full Text:
- Date Issued: 2002
The evaluation of waste minimization/waste treatment strategies for a commercial production process of 4-methyl-3-thiosemicarbazide
- Authors: Bennen, Wilroy
- Date: 2002
- Subjects: Hazardous wastes , Hazardous substances -- Analysis
- Language: English
- Type: Thesis , Masters , MTech (Chemistry)
- Identifier: vital:10951 , http://hdl.handle.net/10948/97 , Hazardous wastes , Hazardous substances -- Analysis
- Description: Chemical synthesis is closely related to waste minimization. There is no chemical process that does not produce waste. The methods used by industry to deal with this waste is a major environmental concern. This thesis describes the laboratory scale waste minimization and waste treatment strategies for the commercial production process of 4-methyl-3-thiosemicarbazide (MTSC). The production process of 4-methyl-3-thiosemicarbazide was investigated with the aim of increasing the isolated yield of MTSC and at the same time decrease the amount and toxicity of effluent obtained. During this study, parameters were investigated such as the use of excess DIPEA and the temperature of the reaction. Preliminary studies clearly showed that both factors have a significant influence on the final yield of the product. The next part of the investigation was to optimize the two parameters influencing the isolated yield of the MTSC. For this investigation, a multi factorial design was used to determine the optimum conditions in the MTSC yield response. From the results obtained, it was clear that the excess of DIPEA and the temperature of the reaction both need to be high to obtain high yields. These theoretical results were confirmed by results obtained practically, where yields of up 82 % were obtained, but it became clear that even higher yields could be obtained since chromatographic results showed yeilds as high as 90 %. The mass balance of the MTSC synthesis showed a loss of approximately 30 grams per reaction. This loss may have an influence on the final yield. The effluent obtained during the synthesis of MTSC was investigated and a waste treatment protocol was established to reduce the high COD value of the MTSC effluent. The protocol consists of two steps used for the clean up of the effluent. The first being a cooling step; the effluent was cooled at 0oC to induce precipitation of a solid, consisting mostly of MTSC. The second step is a high pressure wet oxidation of the effluent with oxygen in a high pressure reactor. The remaining compounds in the effluent were oxidized, resulting in another precipitate, consisting mostly of sulphur. After the oxidation the COD value of the effluent was decreased by 98 % to a value of 0.4 %. The MTSC present in the precipitate obtained after cooling could be isolated and purified, to add to the yield of the synthesis. The sulphur obtained during the oxidation could also be isolated and reused, or sold to prevent it from contaminating the environment.
- Full Text:
- Date Issued: 2002
- Authors: Bennen, Wilroy
- Date: 2002
- Subjects: Hazardous wastes , Hazardous substances -- Analysis
- Language: English
- Type: Thesis , Masters , MTech (Chemistry)
- Identifier: vital:10951 , http://hdl.handle.net/10948/97 , Hazardous wastes , Hazardous substances -- Analysis
- Description: Chemical synthesis is closely related to waste minimization. There is no chemical process that does not produce waste. The methods used by industry to deal with this waste is a major environmental concern. This thesis describes the laboratory scale waste minimization and waste treatment strategies for the commercial production process of 4-methyl-3-thiosemicarbazide (MTSC). The production process of 4-methyl-3-thiosemicarbazide was investigated with the aim of increasing the isolated yield of MTSC and at the same time decrease the amount and toxicity of effluent obtained. During this study, parameters were investigated such as the use of excess DIPEA and the temperature of the reaction. Preliminary studies clearly showed that both factors have a significant influence on the final yield of the product. The next part of the investigation was to optimize the two parameters influencing the isolated yield of the MTSC. For this investigation, a multi factorial design was used to determine the optimum conditions in the MTSC yield response. From the results obtained, it was clear that the excess of DIPEA and the temperature of the reaction both need to be high to obtain high yields. These theoretical results were confirmed by results obtained practically, where yields of up 82 % were obtained, but it became clear that even higher yields could be obtained since chromatographic results showed yeilds as high as 90 %. The mass balance of the MTSC synthesis showed a loss of approximately 30 grams per reaction. This loss may have an influence on the final yield. The effluent obtained during the synthesis of MTSC was investigated and a waste treatment protocol was established to reduce the high COD value of the MTSC effluent. The protocol consists of two steps used for the clean up of the effluent. The first being a cooling step; the effluent was cooled at 0oC to induce precipitation of a solid, consisting mostly of MTSC. The second step is a high pressure wet oxidation of the effluent with oxygen in a high pressure reactor. The remaining compounds in the effluent were oxidized, resulting in another precipitate, consisting mostly of sulphur. After the oxidation the COD value of the effluent was decreased by 98 % to a value of 0.4 %. The MTSC present in the precipitate obtained after cooling could be isolated and purified, to add to the yield of the synthesis. The sulphur obtained during the oxidation could also be isolated and reused, or sold to prevent it from contaminating the environment.
- Full Text:
- Date Issued: 2002
The impact of multi-skilling training on the paintshop production environment and its employees at Volkswagen South Africa (VWSA)
- Authors: Bhika, Chandrika
- Date: 2002
- Subjects: Employees -- Training of , Automobile industry and trade -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10852 , http://hdl.handle.net/10948/130 , Employees -- Training of , Automobile industry and trade -- South Africa -- Eastern Cape
- Description: Global competition and rapid technological change have been the driving forces for a more flexible and competent workforce. Continuous employee training assists organisations to achieve their goals by adding value to their key resources, the human factor. The demand for a more qualified workforce becomes a strategic force in the effort to raise competitiveness. Providing, obtaining and improving the necessary skills are important in responding to a rapidly changing international economy. Life-long learning and continuous skills development are the new requirements imposed by our knowledgeintensive society. The overall purpose of the research was to determine the impact of multi-skilling training (MST) on the paintshop production environment and its employees at Volkswagen South Africa (VWSA). The objectives of this research were to: Identify the elements of multi-skilling training and guidelines for its development and implementation; Critically evaluate the current system; Determine the impact of multi-skilling training on the production environment in the paint shop at VWSA The research methodology for this study comprised the following steps: Firstly, the development and implementation of MST at Volkswagen South Africa was assessed. The elements of MST and its impact on production and the employee worldwide were determined through the literature study. Secondly, the limitations of the current MST system used in the paintshop at Volkswagen South Africa were assessed in an empirical study, which involved completing of questionnaires. The empirical study proved that the current MST system employed in the paintshop at Volkswagen South Africa had assisted in improving production, and increasing the employees’ morale. The final step of this study entailed the formulation of recommendations, which are as follows: · Sufficient time should be allocated for practical training. · Frequent job rotation must be implement ed. · Advanced MST must be implemented after completion of Level Four. · MST should be presented in English, Afrikaans and Xhosa.
- Full Text:
- Date Issued: 2002
- Authors: Bhika, Chandrika
- Date: 2002
- Subjects: Employees -- Training of , Automobile industry and trade -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10852 , http://hdl.handle.net/10948/130 , Employees -- Training of , Automobile industry and trade -- South Africa -- Eastern Cape
- Description: Global competition and rapid technological change have been the driving forces for a more flexible and competent workforce. Continuous employee training assists organisations to achieve their goals by adding value to their key resources, the human factor. The demand for a more qualified workforce becomes a strategic force in the effort to raise competitiveness. Providing, obtaining and improving the necessary skills are important in responding to a rapidly changing international economy. Life-long learning and continuous skills development are the new requirements imposed by our knowledgeintensive society. The overall purpose of the research was to determine the impact of multi-skilling training (MST) on the paintshop production environment and its employees at Volkswagen South Africa (VWSA). The objectives of this research were to: Identify the elements of multi-skilling training and guidelines for its development and implementation; Critically evaluate the current system; Determine the impact of multi-skilling training on the production environment in the paint shop at VWSA The research methodology for this study comprised the following steps: Firstly, the development and implementation of MST at Volkswagen South Africa was assessed. The elements of MST and its impact on production and the employee worldwide were determined through the literature study. Secondly, the limitations of the current MST system used in the paintshop at Volkswagen South Africa were assessed in an empirical study, which involved completing of questionnaires. The empirical study proved that the current MST system employed in the paintshop at Volkswagen South Africa had assisted in improving production, and increasing the employees’ morale. The final step of this study entailed the formulation of recommendations, which are as follows: · Sufficient time should be allocated for practical training. · Frequent job rotation must be implement ed. · Advanced MST must be implemented after completion of Level Four. · MST should be presented in English, Afrikaans and Xhosa.
- Full Text:
- Date Issued: 2002
Design, development and analysis of the friction stir welding process
- Authors: Blignault, Calvin
- Date: 2002
- Subjects: Friction welding
- Language: English
- Type: Thesis , Masters , MTech (Mechanical Engineering)
- Identifier: vital:10809 , http://hdl.handle.net/10948/1350 , Friction welding
- Description: The development of a CNC-based technology FSW machine to accurately produce friction stir weld samples that can be analyzed for research purposes is implemented and discussed. A process diagnosis and control scheme to improve the process monitoring and weld evaluation capabilities of an FSW machine are proposed and implemented. Basic CNC-based hardware implementation such as optical encoders and inverters for process control are explained and verified. The control scheme and framework of interfaces to the digital I/O cards for PC user interface are explained. An advanced monitoring system which senses process performance parameters such as tool temperature, 3-axis tool forces, torque and spindle speed are explained. Mechanical designs and manufacturing techniques such as tool, clamp and backing plate designs are explained and verified. The process parameters for quality optimization are investigated and optimized by making use of Correlation and Regression Analysis. The statistical data and analytical relationships between welding parameters (independent) and each of the performance parameters (dependent) are obtained and used to simulate the machining process. The weld research samples are tested for strength and integrity making use of various scientific testing techniques. The reliability of the samples are also evaluated and compared to that of other institutions. Process variables and the optimum operating range of the Friction Stir Welding machine is determined and a framework for further research into weld quality optimization is set.
- Full Text:
- Date Issued: 2002
- Authors: Blignault, Calvin
- Date: 2002
- Subjects: Friction welding
- Language: English
- Type: Thesis , Masters , MTech (Mechanical Engineering)
- Identifier: vital:10809 , http://hdl.handle.net/10948/1350 , Friction welding
- Description: The development of a CNC-based technology FSW machine to accurately produce friction stir weld samples that can be analyzed for research purposes is implemented and discussed. A process diagnosis and control scheme to improve the process monitoring and weld evaluation capabilities of an FSW machine are proposed and implemented. Basic CNC-based hardware implementation such as optical encoders and inverters for process control are explained and verified. The control scheme and framework of interfaces to the digital I/O cards for PC user interface are explained. An advanced monitoring system which senses process performance parameters such as tool temperature, 3-axis tool forces, torque and spindle speed are explained. Mechanical designs and manufacturing techniques such as tool, clamp and backing plate designs are explained and verified. The process parameters for quality optimization are investigated and optimized by making use of Correlation and Regression Analysis. The statistical data and analytical relationships between welding parameters (independent) and each of the performance parameters (dependent) are obtained and used to simulate the machining process. The weld research samples are tested for strength and integrity making use of various scientific testing techniques. The reliability of the samples are also evaluated and compared to that of other institutions. Process variables and the optimum operating range of the Friction Stir Welding machine is determined and a framework for further research into weld quality optimization is set.
- Full Text:
- Date Issued: 2002
A cyclic approach to business continuity planning
- Authors: Botha, Jacques
- Date: 2002
- Subjects: Data recovery (Computer science) -- Planning , Data protection , Emergency management
- Language: English
- Type: Thesis , Masters , MTech (Information Technology)
- Identifier: vital:10788 , http://hdl.handle.net/10948/81 , Data recovery (Computer science) -- Planning , Data protection , Emergency management
- Description: The Information Technology (IT) industry has grown and has become an integral part in the world of business today. The importance of information, and IT in particular, will in fact only increase with time (von Solms, 1999). For a large group of organizations computer systems form the basis of their day-to-day functioning (Halliday, Badendorst & von Solms, 1996). These systems evolve at an incredible pace and this brings about a greater need for securing them, as well as the organizational information processed, transmitted and stored. This technological evolution brings about new risks for an organization’s systems and information (Halliday et. al., 1996). If IT fails, it means that the business could fail as well, creating a need for more rigorous IT management (International Business Machines Corporation, 2000). For this reason, executive management must be made aware of the potential consequences that a disaster could have on the organisation (Hawkins,Yen & Chou, 2000). A disaster could be any event that would cause a disruption in the normal day-to-day functioning of an organization. Such an event could range from a natural disaster, like a fire, an earthquake or a flood, to something more trivial, like a virus or system malfunction (Hawkins et. al., 2000). During the 1980’s a discipline known as Disaster Recovery Planning (DRP) emerged to protect an organization’s data centre, which was central to the organisation’s IT based structure, from the effects of disasters. This solution, however, focussed only on the protection of the data centre. During the early 1990’s the focus shifted towards distributed computing and client/server technology. Data centre protection and recovery were no longer enough to ensure survival. Organizations needed to ensure the continuation of their mission critical processes to support their continued goal of operations (IBM Global Services, 1999). Organizations now had to ensure that their mission critical functions could continue while the data centre was recovering from a disaster. A different approach was required. It is for this reason that Business Continuity Planning (BCP) was accepted as a formal discipline (IBM Global Services, 1999). To ensure that business continues as usual, an organization must have a plan in place that will help them ensure both the continuation and recovery of critical business processes and the recovery of the data centre, should a disaster strike (Moore, 1995). Wilson (2000) defines a business continuity plan as “a set of procedures developed for the entire enterprise, outlining the actions to be taken by the IT organization, executive staff, and the various business units in order to quickly resume operations in the event of a service interruption or an outage”. With markets being highly competitive as they are, an organization needs a detailed listing of steps to follow to ensure minimal loss due to downtime. This is very important for maintaining its competitive advantage and public stature (Wilson, 2000). The fact that the company’s reputation is at stake requires executive management to take continuity planning very serious (IBM Global Services, 1999). Ensuring continuity of business processes and recovering the IT services of an organization is not the sole responsibility of the IT department. Therefore management should be aware that they could be held liable for any consequences resulting from a disaster (Kearvell-White, 1996). Having a business continuity plan in place is important to the entire organization, as everyone, from executive management to the employees, stands to benefit from it (IBM Global Services, 1999). Despite this, numerous organizations do not have a business continuity plan in place. Organizations neglecting to develop a plan put themselves at tremendous risk and stand to loose everything (Kearvell-White, 1996).
- Full Text:
- Date Issued: 2002
- Authors: Botha, Jacques
- Date: 2002
- Subjects: Data recovery (Computer science) -- Planning , Data protection , Emergency management
- Language: English
- Type: Thesis , Masters , MTech (Information Technology)
- Identifier: vital:10788 , http://hdl.handle.net/10948/81 , Data recovery (Computer science) -- Planning , Data protection , Emergency management
- Description: The Information Technology (IT) industry has grown and has become an integral part in the world of business today. The importance of information, and IT in particular, will in fact only increase with time (von Solms, 1999). For a large group of organizations computer systems form the basis of their day-to-day functioning (Halliday, Badendorst & von Solms, 1996). These systems evolve at an incredible pace and this brings about a greater need for securing them, as well as the organizational information processed, transmitted and stored. This technological evolution brings about new risks for an organization’s systems and information (Halliday et. al., 1996). If IT fails, it means that the business could fail as well, creating a need for more rigorous IT management (International Business Machines Corporation, 2000). For this reason, executive management must be made aware of the potential consequences that a disaster could have on the organisation (Hawkins,Yen & Chou, 2000). A disaster could be any event that would cause a disruption in the normal day-to-day functioning of an organization. Such an event could range from a natural disaster, like a fire, an earthquake or a flood, to something more trivial, like a virus or system malfunction (Hawkins et. al., 2000). During the 1980’s a discipline known as Disaster Recovery Planning (DRP) emerged to protect an organization’s data centre, which was central to the organisation’s IT based structure, from the effects of disasters. This solution, however, focussed only on the protection of the data centre. During the early 1990’s the focus shifted towards distributed computing and client/server technology. Data centre protection and recovery were no longer enough to ensure survival. Organizations needed to ensure the continuation of their mission critical processes to support their continued goal of operations (IBM Global Services, 1999). Organizations now had to ensure that their mission critical functions could continue while the data centre was recovering from a disaster. A different approach was required. It is for this reason that Business Continuity Planning (BCP) was accepted as a formal discipline (IBM Global Services, 1999). To ensure that business continues as usual, an organization must have a plan in place that will help them ensure both the continuation and recovery of critical business processes and the recovery of the data centre, should a disaster strike (Moore, 1995). Wilson (2000) defines a business continuity plan as “a set of procedures developed for the entire enterprise, outlining the actions to be taken by the IT organization, executive staff, and the various business units in order to quickly resume operations in the event of a service interruption or an outage”. With markets being highly competitive as they are, an organization needs a detailed listing of steps to follow to ensure minimal loss due to downtime. This is very important for maintaining its competitive advantage and public stature (Wilson, 2000). The fact that the company’s reputation is at stake requires executive management to take continuity planning very serious (IBM Global Services, 1999). Ensuring continuity of business processes and recovering the IT services of an organization is not the sole responsibility of the IT department. Therefore management should be aware that they could be held liable for any consequences resulting from a disaster (Kearvell-White, 1996). Having a business continuity plan in place is important to the entire organization, as everyone, from executive management to the employees, stands to benefit from it (IBM Global Services, 1999). Despite this, numerous organizations do not have a business continuity plan in place. Organizations neglecting to develop a plan put themselves at tremendous risk and stand to loose everything (Kearvell-White, 1996).
- Full Text:
- Date Issued: 2002
The relationship between the leadership, internal quality, and customer satisfaction levels of dealerships in a South African motor vehicle organisation
- Authors: Botha, Jennifer
- Date: 2002
- Subjects: Consumer satisfaction , Automobile dealers -- South Africa , Industrial productivity , Customer services
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: vital:1185 , http://hdl.handle.net/10962/d1002802 , Consumer satisfaction , Automobile dealers -- South Africa , Industrial productivity , Customer services
- Description: This research investigates the relationship between the leadership, internal quality, and customer satisfaction levels in the dealerships of a South African motor vehicle organisation. The Service Profit Chain provides the background theory to this relationship, by suggesting that various factors within the service delivery system of an organisation affect the level of customer satisfaction. From the Service Profit Chain, it is established that two of the prevalent factors affecting customer satisfaction, are leadership and internal quality. The Full Range Leadership Development Theory provides the backdrop for analysing the leadership style of each dealership by using the Multifactor Leadership Questionnaire. The Competence Process forms the theoretical construct against which the internal quality of these dealerships is assessed using the Organisation Competence Analysis Questionnaire. Information was gathered, using these two instruments, from a sample of 85 motor vehicle dealerships within South Africa. The customer satisfaction levels at each of these dealerships, is measured by the motor vehicle organisation’s own instrument, known as the Customer Satisfaction Index. Data obtained from each instrument, for the respective dealerships, was then statistically analysed. However, due to the low reliability of the instruments used in this research, the results of this study indicate that there is no relationship between the leadership, internal quality, and customer satisfaction levels within a South African motor vehicle organisation. Therefore we can conclude that the null hypotheses can not be rejected.
- Full Text:
- Date Issued: 2002
- Authors: Botha, Jennifer
- Date: 2002
- Subjects: Consumer satisfaction , Automobile dealers -- South Africa , Industrial productivity , Customer services
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: vital:1185 , http://hdl.handle.net/10962/d1002802 , Consumer satisfaction , Automobile dealers -- South Africa , Industrial productivity , Customer services
- Description: This research investigates the relationship between the leadership, internal quality, and customer satisfaction levels in the dealerships of a South African motor vehicle organisation. The Service Profit Chain provides the background theory to this relationship, by suggesting that various factors within the service delivery system of an organisation affect the level of customer satisfaction. From the Service Profit Chain, it is established that two of the prevalent factors affecting customer satisfaction, are leadership and internal quality. The Full Range Leadership Development Theory provides the backdrop for analysing the leadership style of each dealership by using the Multifactor Leadership Questionnaire. The Competence Process forms the theoretical construct against which the internal quality of these dealerships is assessed using the Organisation Competence Analysis Questionnaire. Information was gathered, using these two instruments, from a sample of 85 motor vehicle dealerships within South Africa. The customer satisfaction levels at each of these dealerships, is measured by the motor vehicle organisation’s own instrument, known as the Customer Satisfaction Index. Data obtained from each instrument, for the respective dealerships, was then statistically analysed. However, due to the low reliability of the instruments used in this research, the results of this study indicate that there is no relationship between the leadership, internal quality, and customer satisfaction levels within a South African motor vehicle organisation. Therefore we can conclude that the null hypotheses can not be rejected.
- Full Text:
- Date Issued: 2002
Effect of selected physical and production traits on the tick burdens of beef cattle
- Authors: Botha, Theunis Christoffel
- Date: 2002
- Subjects: Beef cattle -- Breeding
- Language: English
- Type: Thesis , Masters , MTech (Agricultural Management)
- Identifier: vital:10966 , http://hdl.handle.net/10948/91 , Beef cattle -- Breeding
- Description: The objective of this study was to determine the effect of selected traits such as age, sex, body weight, body length and height, body condition score (BCS), coatscore (CS), skin thickness and average skin surface temperature on tick burdens in beef cattle. Bonsmara cattle (n= 143) were used to measure visible tick counts, body condition score, coat score, skin thickness, body height and length, body weight, body surface temperature, gender and inter calving period. Measurements were taken from April to December. All animals were managed extensively on natural and cultivated pastures near George in the Southern Cape. Female animals had significantly (p<0.05) greater tick infestation (37.98±2.7) compared to male animals (16.52±1.2). Age was a significant factor (p<0.001) with the younger animals below two years having (46.40±5.26) more ticks than those of two years and older (20.15±2.44). A significant negative correlation (p<0.001; -0.29) was reported between the infestation of ticks on the animals and the age of the animal. Animals with an average body weight below 250kg had 42% (p<0.05) more ticks compared to animals with a body weight above 250kg. Age of the animal and weight were highly correlated (r= 0.70); p<0.001), while the correlation between the number of ticks per cow and the mean weight was negatively correlated (r= -0.37; p<0.001). Skin surface temperature significantly influenced tick infestation on the animals (p<0.001). The degree of infestation increased as body surface temperature exceeded 30º C. Coat score, skin thickness, body condition score and inter calving period did not significantly influence tick infestation on the animals. The infestation of ticks on the animals were significantly influenced by body height (p<0.019) and body length (p<0.001). Animals smaller than a 130cm in height had a significantly (p<0.05) greater tick infestation (36.5±5) compared to animals taller than 130cm (21.2±1.5). This trend was also observed for body length. Animals with a body length shorter than 145cm had a greater (p<0.05) average tick infestation of 41.3±4.5 compared to 23.2±1.3 to animals longer than 145cm, indicating a 44% greater tick infestation in favour of the shorter animals. For increased production and tick resistance animals should have smoother coats and be able to dissipate heat effectively.
- Full Text:
- Date Issued: 2002
- Authors: Botha, Theunis Christoffel
- Date: 2002
- Subjects: Beef cattle -- Breeding
- Language: English
- Type: Thesis , Masters , MTech (Agricultural Management)
- Identifier: vital:10966 , http://hdl.handle.net/10948/91 , Beef cattle -- Breeding
- Description: The objective of this study was to determine the effect of selected traits such as age, sex, body weight, body length and height, body condition score (BCS), coatscore (CS), skin thickness and average skin surface temperature on tick burdens in beef cattle. Bonsmara cattle (n= 143) were used to measure visible tick counts, body condition score, coat score, skin thickness, body height and length, body weight, body surface temperature, gender and inter calving period. Measurements were taken from April to December. All animals were managed extensively on natural and cultivated pastures near George in the Southern Cape. Female animals had significantly (p<0.05) greater tick infestation (37.98±2.7) compared to male animals (16.52±1.2). Age was a significant factor (p<0.001) with the younger animals below two years having (46.40±5.26) more ticks than those of two years and older (20.15±2.44). A significant negative correlation (p<0.001; -0.29) was reported between the infestation of ticks on the animals and the age of the animal. Animals with an average body weight below 250kg had 42% (p<0.05) more ticks compared to animals with a body weight above 250kg. Age of the animal and weight were highly correlated (r= 0.70); p<0.001), while the correlation between the number of ticks per cow and the mean weight was negatively correlated (r= -0.37; p<0.001). Skin surface temperature significantly influenced tick infestation on the animals (p<0.001). The degree of infestation increased as body surface temperature exceeded 30º C. Coat score, skin thickness, body condition score and inter calving period did not significantly influence tick infestation on the animals. The infestation of ticks on the animals were significantly influenced by body height (p<0.019) and body length (p<0.001). Animals smaller than a 130cm in height had a significantly (p<0.05) greater tick infestation (36.5±5) compared to animals taller than 130cm (21.2±1.5). This trend was also observed for body length. Animals with a body length shorter than 145cm had a greater (p<0.05) average tick infestation of 41.3±4.5 compared to 23.2±1.3 to animals longer than 145cm, indicating a 44% greater tick infestation in favour of the shorter animals. For increased production and tick resistance animals should have smoother coats and be able to dissipate heat effectively.
- Full Text:
- Date Issued: 2002
The biology and molecular ecology of floating sulphur biofilms
- Authors: Bowker, Michelle Louise
- Date: 2002
- Subjects: Biofilms , Microbial ecology , Sulfur
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4056 , http://hdl.handle.net/10962/d1004117 , Biofilms , Microbial ecology , Sulfur
- Description: Floating sulphur biofilms have been observed to occur on sulphate-containing natural systems and waste stabilization ponds. It has been postulated that these biofilms form on the surface of the water because sulphate reducing bacteria present in the bottom layers of the water body reduce sulphate to sulphide which then diffuses upwards and is oxidized under the correct redox conditions to sulphur by sulphide oxidizing bacteria. Very little information exists on these complex floating systems and in order to study them further, model systems were designed. The Baffle Reactor was successfully used to cultivate floating sulphur biofilms. Conditions within the reactor could be closely scrutinized in the laboratory and it was found that sulphate levels decreased, sulphide levels increased and that sulphur was produced over a period of 2 weeks. The success of this system led to it being scaled-up and currently a method to harvest sulphur from the biofilm is under development. It is thought that biofilms are highly complex, heterogeneous structures with different bacteria distributed in different layers. Preliminary work suggested that bacteria were differentially distributed along nutrient and oxygen gradients within the biofilm. Biofilms are very thin structures and therefore difficult to study and Gradient systems were developed in an attempt to spatially separate the biofilm species into functional layers. Gradient Tubes were designed; these provided a gradient of high-sulphide, low oxygen conditions to high-oxygen, low-sulphide conditions. Bacteria were observed to grow in different layers of these systems. The Gradient Tubes could be sectioned and the chemical characteristics of each section as well as the species present could be determined. Silicon Tubular Bioreactors were also developed and these were very efficient at producing large amounts of sulphur under strictly controlled redox conditions. Microscopy and molecular methods including the amplification of a section of Ribosomal Ribonucleic acid by Polymerase Chain Reaction were used in an attempt to characterize the populations present in these biofilm systems. Denaturing Gradient Gel Electrophoresis was used to create band profiles of the populations; individual bands were excised from the gels and sequenced. Identified species included Ectothiorhodospira sp., Dethiosulfovibrio russensis, Pseudomonas geniculata, Thiobacillus baregensis and Halothiobacillus kellyi.
- Full Text:
- Date Issued: 2002
- Authors: Bowker, Michelle Louise
- Date: 2002
- Subjects: Biofilms , Microbial ecology , Sulfur
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4056 , http://hdl.handle.net/10962/d1004117 , Biofilms , Microbial ecology , Sulfur
- Description: Floating sulphur biofilms have been observed to occur on sulphate-containing natural systems and waste stabilization ponds. It has been postulated that these biofilms form on the surface of the water because sulphate reducing bacteria present in the bottom layers of the water body reduce sulphate to sulphide which then diffuses upwards and is oxidized under the correct redox conditions to sulphur by sulphide oxidizing bacteria. Very little information exists on these complex floating systems and in order to study them further, model systems were designed. The Baffle Reactor was successfully used to cultivate floating sulphur biofilms. Conditions within the reactor could be closely scrutinized in the laboratory and it was found that sulphate levels decreased, sulphide levels increased and that sulphur was produced over a period of 2 weeks. The success of this system led to it being scaled-up and currently a method to harvest sulphur from the biofilm is under development. It is thought that biofilms are highly complex, heterogeneous structures with different bacteria distributed in different layers. Preliminary work suggested that bacteria were differentially distributed along nutrient and oxygen gradients within the biofilm. Biofilms are very thin structures and therefore difficult to study and Gradient systems were developed in an attempt to spatially separate the biofilm species into functional layers. Gradient Tubes were designed; these provided a gradient of high-sulphide, low oxygen conditions to high-oxygen, low-sulphide conditions. Bacteria were observed to grow in different layers of these systems. The Gradient Tubes could be sectioned and the chemical characteristics of each section as well as the species present could be determined. Silicon Tubular Bioreactors were also developed and these were very efficient at producing large amounts of sulphur under strictly controlled redox conditions. Microscopy and molecular methods including the amplification of a section of Ribosomal Ribonucleic acid by Polymerase Chain Reaction were used in an attempt to characterize the populations present in these biofilm systems. Denaturing Gradient Gel Electrophoresis was used to create band profiles of the populations; individual bands were excised from the gels and sequenced. Identified species included Ectothiorhodospira sp., Dethiosulfovibrio russensis, Pseudomonas geniculata, Thiobacillus baregensis and Halothiobacillus kellyi.
- Full Text:
- Date Issued: 2002
A phenomenological investigation of Windhoek Senior Secondary school principals' perceptions and experiences of their leadership roles
- Authors: Boys, Ben
- Date: 2002
- Subjects: School principals -- Namibia Educational leadership -- Namibia
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:1700 , http://hdl.handle.net/10962/d1003583
- Description: Namibia, having been a former colony of South Africa, was equally subjected to apartheid laws and practices. Independence, achieved in March 1990, signaled the dawn of a new era of access, equity, quality and democracy in the Namibian education sector. A unified system of educational administration, management, and control was established. The whole educational corps, especially the principals of all our schools, is expected to implement this new system as agents of change. In terms of the vision for a new Namibia, therefore, school principals are seen as occupying positions of central importance. This notion resonates strongly with recent and contemporary leadership thinking. However, a number of concerns prevalent in schools - particularly, increasing student underperformance, worsening disciplinary problems, increasing teenage pregnancy and HIV/AIDS pandemic, teacher qualification, decreasing teacher motivation, lack of training including induction for principals, inadequate support from the top (lack of a support system) and insufficient parental involvement in school matters – make the task of running schools extremely challenging and increasingly complex. How do principals experience these challenges and deal with the complex situations? How do they perceive their role, particularly in light of national aspirations and leadership theory? These are questions I think need to be explored. My research goal was to gain an understanding of Windhoek senior secondary school principals’ perceptions and experiences of their leadership role. My focus was on three purposively selected Windhoek senior secondary school principals representative of both the Namibian ethno-cultural diversity and gender. Data was collected through interviews. I found that the situations in which the principals found themselves during the pre- and post independent periods mainly determined their leadership style and behaviour, however, that did not deter their vision for the transformation of the society, as the ultimate objective and essence of their leadership. The appropriate practicing of their leadership role was being hampered by lack of induction and training, lack of a support system and insufficient parental involvement.
- Full Text:
- Date Issued: 2002
- Authors: Boys, Ben
- Date: 2002
- Subjects: School principals -- Namibia Educational leadership -- Namibia
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:1700 , http://hdl.handle.net/10962/d1003583
- Description: Namibia, having been a former colony of South Africa, was equally subjected to apartheid laws and practices. Independence, achieved in March 1990, signaled the dawn of a new era of access, equity, quality and democracy in the Namibian education sector. A unified system of educational administration, management, and control was established. The whole educational corps, especially the principals of all our schools, is expected to implement this new system as agents of change. In terms of the vision for a new Namibia, therefore, school principals are seen as occupying positions of central importance. This notion resonates strongly with recent and contemporary leadership thinking. However, a number of concerns prevalent in schools - particularly, increasing student underperformance, worsening disciplinary problems, increasing teenage pregnancy and HIV/AIDS pandemic, teacher qualification, decreasing teacher motivation, lack of training including induction for principals, inadequate support from the top (lack of a support system) and insufficient parental involvement in school matters – make the task of running schools extremely challenging and increasingly complex. How do principals experience these challenges and deal with the complex situations? How do they perceive their role, particularly in light of national aspirations and leadership theory? These are questions I think need to be explored. My research goal was to gain an understanding of Windhoek senior secondary school principals’ perceptions and experiences of their leadership role. My focus was on three purposively selected Windhoek senior secondary school principals representative of both the Namibian ethno-cultural diversity and gender. Data was collected through interviews. I found that the situations in which the principals found themselves during the pre- and post independent periods mainly determined their leadership style and behaviour, however, that did not deter their vision for the transformation of the society, as the ultimate objective and essence of their leadership. The appropriate practicing of their leadership role was being hampered by lack of induction and training, lack of a support system and insufficient parental involvement.
- Full Text:
- Date Issued: 2002
The effect of energy and protein nutritional levels on production of breeding ostriches
- Authors: Brand, Zanell
- Date: 2002
- Subjects: Ostriches -- Nutrition , Ostriches -- Breeding--South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5805 , http://hdl.handle.net/10962/d1006312 , Ostriches -- Nutrition , Ostriches -- Breeding--South Africa
- Description: Adequate and appropriate nutrition is essential for the production of high quality commercially farmed animal species. Although South Africa has had a well-established ostrich industry for over a century, little information on ostrich nutrition, in particular the specific nutritional requirements at different stages of production, is available. The industry has consequently relied heavily on data derived from poultry and pigs, but this has often proved to be unsatisfactory for ostriches and has resulted in serious nutritional-related problems. Recent studies on the metabolisable energy of specific components of diet formulations and balanced diets have indicated that ostriches have enhanced digestibility compared with poultry and pigs. At the same time, in the present economic climate, it is necessary to find cost-effective diets for breeding birds without compromising egg and chick production. This study primarily assessed the effect of different dietary protein and energy levels on production parameters and body condition of breeding female and male ostriches. The energy content of the diet appears to be the main constraint to egg production and breeders on low energy diets laid fewer eggs and lost more body condition compared with breeders fed higher energy diets. A diet with 8.5 MJ/kg DM and 10% protein with well balanced amino acids appears to be sufficient for female breeders without compromising production and a diet with 7.5 MJ/kg DM and 10% protein appears suitable for breeding male ostriches. Different dietary energy and protein levels similarly had little or no effect on egg quality and composition. This study also assessed the carry-over effect of the nutritional regime in one year on the production in the following breeding season. Females fed diets as low as 7.5 MJ/kg ME in the previous breeding season produced significantly fewer eggs in the next breeding season, which resulted in lower chick production. Energy had no effect on the percentage infertile eggs or on the initial egg weight. Different levels of dietary protein had no effect on egg production, egg weight, fertility, hatchability and initial chick weight.
- Full Text:
- Date Issued: 2002
- Authors: Brand, Zanell
- Date: 2002
- Subjects: Ostriches -- Nutrition , Ostriches -- Breeding--South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5805 , http://hdl.handle.net/10962/d1006312 , Ostriches -- Nutrition , Ostriches -- Breeding--South Africa
- Description: Adequate and appropriate nutrition is essential for the production of high quality commercially farmed animal species. Although South Africa has had a well-established ostrich industry for over a century, little information on ostrich nutrition, in particular the specific nutritional requirements at different stages of production, is available. The industry has consequently relied heavily on data derived from poultry and pigs, but this has often proved to be unsatisfactory for ostriches and has resulted in serious nutritional-related problems. Recent studies on the metabolisable energy of specific components of diet formulations and balanced diets have indicated that ostriches have enhanced digestibility compared with poultry and pigs. At the same time, in the present economic climate, it is necessary to find cost-effective diets for breeding birds without compromising egg and chick production. This study primarily assessed the effect of different dietary protein and energy levels on production parameters and body condition of breeding female and male ostriches. The energy content of the diet appears to be the main constraint to egg production and breeders on low energy diets laid fewer eggs and lost more body condition compared with breeders fed higher energy diets. A diet with 8.5 MJ/kg DM and 10% protein with well balanced amino acids appears to be sufficient for female breeders without compromising production and a diet with 7.5 MJ/kg DM and 10% protein appears suitable for breeding male ostriches. Different dietary energy and protein levels similarly had little or no effect on egg quality and composition. This study also assessed the carry-over effect of the nutritional regime in one year on the production in the following breeding season. Females fed diets as low as 7.5 MJ/kg ME in the previous breeding season produced significantly fewer eggs in the next breeding season, which resulted in lower chick production. Energy had no effect on the percentage infertile eggs or on the initial egg weight. Different levels of dietary protein had no effect on egg production, egg weight, fertility, hatchability and initial chick weight.
- Full Text:
- Date Issued: 2002
The relationship between three anxiety related clusters in projective drawings and anxiety and ego-strength scales of the Minnesota multiphasic personality inventory-2
- Authors: Brink, André
- Date: 2002
- Subjects: Projective techniques , Personality assessment , Personality tests , Anxiety , Minnesota Multiphasic Personality Inventory
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:2942 , http://hdl.handle.net/10962/d1002451 , Projective techniques , Personality assessment , Personality tests , Anxiety , Minnesota Multiphasic Personality Inventory
- Description: Based on the shortcomings of past research, the need for understanding and investigation of the general relationship between self-report measures and human figure drawings required understanding and investigation (Riethmiller & Handler, 1997b; Waehler, 1997) while utilising a quantitative, configural scoring approach. Riethmiller and Handler (1997a; 1997b) hypothesised that subjects have one of two typical approach styles to anxiety/stress that influences their execution of the Human Figure Drawing (HFD) Test: “Avoidance” or “Coping” as measured by composite scoring index clusters. They argue that these two approach styles had to be taken into account when investigating anxiety on the HFD Test. According to Handler and Reyher (1965) those who experience more intense anxiety typically rely on an “Avoidant” approach, while those with lower anxiety typically rely on a “Coping” approach. The “Coping” response is hypothesised to suggest good ego-strength, and the “Avoidant” response poor ego-strength. Handler and Reyher (1964; 1965; 1966) also argued that there are two sources of anxiety on projective drawings: internal and external sources of anxiety. They hypothesised that the “External” anxiety cluster (measured by utilising the car drawing) and self-report measures both assess ‘external’ anxiety. Using Handler’s (1967) HFD index scoring manual, this research therefore inve stigated the level of correlation of the two MMPI-2 anxiety scale scores with (a) the hypothesised Stress Approach HFD cluster scores, as well as with (b) the “External” anxiety cluster score, while the hypothesised Stress Approach HFD cluster scores were compared with the (c) MMPI-2 ego strength scale score. The results of the investigated relationships yielded non-significant correlations overall. The differences in nature of the two measurement instruments, and the potential weaknesses of this study, as two likely explanations for these correlations, are discussed. In the consideration of the differences of the two measurement instruments, the weaknesses of SR measures and criterion-related validity are discussed while self- attributed and implicit motives are contrasted with each other. Potential extraneous variables and possible truncated range are discussed as potential weaknesses of this study.
- Full Text:
- Date Issued: 2002
- Authors: Brink, André
- Date: 2002
- Subjects: Projective techniques , Personality assessment , Personality tests , Anxiety , Minnesota Multiphasic Personality Inventory
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:2942 , http://hdl.handle.net/10962/d1002451 , Projective techniques , Personality assessment , Personality tests , Anxiety , Minnesota Multiphasic Personality Inventory
- Description: Based on the shortcomings of past research, the need for understanding and investigation of the general relationship between self-report measures and human figure drawings required understanding and investigation (Riethmiller & Handler, 1997b; Waehler, 1997) while utilising a quantitative, configural scoring approach. Riethmiller and Handler (1997a; 1997b) hypothesised that subjects have one of two typical approach styles to anxiety/stress that influences their execution of the Human Figure Drawing (HFD) Test: “Avoidance” or “Coping” as measured by composite scoring index clusters. They argue that these two approach styles had to be taken into account when investigating anxiety on the HFD Test. According to Handler and Reyher (1965) those who experience more intense anxiety typically rely on an “Avoidant” approach, while those with lower anxiety typically rely on a “Coping” approach. The “Coping” response is hypothesised to suggest good ego-strength, and the “Avoidant” response poor ego-strength. Handler and Reyher (1964; 1965; 1966) also argued that there are two sources of anxiety on projective drawings: internal and external sources of anxiety. They hypothesised that the “External” anxiety cluster (measured by utilising the car drawing) and self-report measures both assess ‘external’ anxiety. Using Handler’s (1967) HFD index scoring manual, this research therefore inve stigated the level of correlation of the two MMPI-2 anxiety scale scores with (a) the hypothesised Stress Approach HFD cluster scores, as well as with (b) the “External” anxiety cluster score, while the hypothesised Stress Approach HFD cluster scores were compared with the (c) MMPI-2 ego strength scale score. The results of the investigated relationships yielded non-significant correlations overall. The differences in nature of the two measurement instruments, and the potential weaknesses of this study, as two likely explanations for these correlations, are discussed. In the consideration of the differences of the two measurement instruments, the weaknesses of SR measures and criterion-related validity are discussed while self- attributed and implicit motives are contrasted with each other. Potential extraneous variables and possible truncated range are discussed as potential weaknesses of this study.
- Full Text:
- Date Issued: 2002
The development of a financial plan to partly cover the cost of frail care in a retirement village in George
- Authors: Brink, F J
- Date: 2002
- Subjects: Older people -- Care -- South Africa , Frail elderly -- Medical care -- South Africa -- George , Frail elderly -- Care -- South Africa -- George
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10919 , http://hdl.handle.net/10948/84 , Older people -- Care -- South Africa , Frail elderly -- Medical care -- South Africa -- George , Frail elderly -- Care -- South Africa -- George
- Description: The world population is ageing, and this is also relevant to South Africa. At the same time the potential support ratio (the number of persons aged 15 to 64 years per one older person aged 65 years or older) is falling, and the dependency burden on potential workers increases. To alleviate the financial burden on the aged, and their families, it has become necessary to develop a financial plan to cover the cost of frail care. The overall purpose of this research is to determine whether any financial plans exist which are relevant. If nothing existed, a plan had to be developed. The research methodology for this study comprised the following steps: Firstly, the demographics of the world and South Africa were researched. The concept of frail (long-term) care in the United States of America and New Zealand was investigated to determine what is available. The subsidisation concept of the South African Government towards caring for the elderly was also investigated. Secondly, a questionnaire was sent to the residents of five retirement complexes in George to determine their interest in such a plan. The records of the frail care unit that these residents utilise were analysed to determine the number of residents needing frail care. A comparative study of the cost of frail care in the Southern Cape was undertaken. Thirdly, two options to partly subsidise the cost of frail care were examined, where the first option covers the running cost, and the second option, subsidising one third of the frail care cost, builds up a sustainable fund after the first five year period. The funds of the second option can then be utilised in the subsequent years to increase the subsidisation portion of frail care cost. The final step of this study entailed the formulation of recommendations to implement the frail care nursing levy as soon as possible, with special attention given to the following: a) It must be compulsory for new residents to join the fund. b) A yearly capital amount of R100 000 or more is needed to sustain the fund. c) A contract must be drafted to set out all the rules and regulations to the residents. d) An attitude change amongst some residents is required. Individuals must realise that the success of this plan depends upon themselves and with the necessary support could make a significant contribution towards their own peace of mind if and when frail care is needed.
- Full Text:
- Date Issued: 2002
- Authors: Brink, F J
- Date: 2002
- Subjects: Older people -- Care -- South Africa , Frail elderly -- Medical care -- South Africa -- George , Frail elderly -- Care -- South Africa -- George
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10919 , http://hdl.handle.net/10948/84 , Older people -- Care -- South Africa , Frail elderly -- Medical care -- South Africa -- George , Frail elderly -- Care -- South Africa -- George
- Description: The world population is ageing, and this is also relevant to South Africa. At the same time the potential support ratio (the number of persons aged 15 to 64 years per one older person aged 65 years or older) is falling, and the dependency burden on potential workers increases. To alleviate the financial burden on the aged, and their families, it has become necessary to develop a financial plan to cover the cost of frail care. The overall purpose of this research is to determine whether any financial plans exist which are relevant. If nothing existed, a plan had to be developed. The research methodology for this study comprised the following steps: Firstly, the demographics of the world and South Africa were researched. The concept of frail (long-term) care in the United States of America and New Zealand was investigated to determine what is available. The subsidisation concept of the South African Government towards caring for the elderly was also investigated. Secondly, a questionnaire was sent to the residents of five retirement complexes in George to determine their interest in such a plan. The records of the frail care unit that these residents utilise were analysed to determine the number of residents needing frail care. A comparative study of the cost of frail care in the Southern Cape was undertaken. Thirdly, two options to partly subsidise the cost of frail care were examined, where the first option covers the running cost, and the second option, subsidising one third of the frail care cost, builds up a sustainable fund after the first five year period. The funds of the second option can then be utilised in the subsequent years to increase the subsidisation portion of frail care cost. The final step of this study entailed the formulation of recommendations to implement the frail care nursing levy as soon as possible, with special attention given to the following: a) It must be compulsory for new residents to join the fund. b) A yearly capital amount of R100 000 or more is needed to sustain the fund. c) A contract must be drafted to set out all the rules and regulations to the residents. d) An attitude change amongst some residents is required. Individuals must realise that the success of this plan depends upon themselves and with the necessary support could make a significant contribution towards their own peace of mind if and when frail care is needed.
- Full Text:
- Date Issued: 2002
A case study of the language policy in practice in the foundation phase of schooling
- Authors: Brookes, Margaret Ann
- Date: 2002
- Subjects: Language policy -- South Africa English language -- Study and teaching (Elementary) -- South Africa
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:1442 , http://hdl.handle.net/10962/d1003323
- Description: This interpretative case study takes place in the foundation phase of a previously parallel medium school in the Eastern Cape. Learners from all three major language groups of the province (English, Xhosa and Afrikaans) are enrolled at the school. The study examines the language attitudes of teachers, parents and young learners and records their language practices in the classroom, the wider school environment and at home. Research carried out through this case study found that all stakeholders perceive English as the language of access to improved education and lifestyle. All young learners displayed a positive attitude to multilingualism and were keen to be able to speak all three provincial languages. The attitudes of their parents and teachers however differed from the learners and each other. The teachers and the English speaking parents were primarily concerned with the maintenance of the standards of English. The Afrikaans and Xhosa speaking parents were committed to their children developing proficient English language skills even if this meant supporting the development of their primary language and culture at home. Furthermore it was discovered that little attention had been paid to developing a school language policy in accordance with the new Language in Education Policy of July 1997. This policy promotes an additive approach to bilingualism and seeks to ensure that meaningful access to learning is provided for all children. By suggesting steps that could be taken by this school to develop their own language policy, the study highlights the necessity of recognising and remedying the gaps between policy and practice in the issue of language rights, identity and education in general.
- Full Text:
- Date Issued: 2002
- Authors: Brookes, Margaret Ann
- Date: 2002
- Subjects: Language policy -- South Africa English language -- Study and teaching (Elementary) -- South Africa
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:1442 , http://hdl.handle.net/10962/d1003323
- Description: This interpretative case study takes place in the foundation phase of a previously parallel medium school in the Eastern Cape. Learners from all three major language groups of the province (English, Xhosa and Afrikaans) are enrolled at the school. The study examines the language attitudes of teachers, parents and young learners and records their language practices in the classroom, the wider school environment and at home. Research carried out through this case study found that all stakeholders perceive English as the language of access to improved education and lifestyle. All young learners displayed a positive attitude to multilingualism and were keen to be able to speak all three provincial languages. The attitudes of their parents and teachers however differed from the learners and each other. The teachers and the English speaking parents were primarily concerned with the maintenance of the standards of English. The Afrikaans and Xhosa speaking parents were committed to their children developing proficient English language skills even if this meant supporting the development of their primary language and culture at home. Furthermore it was discovered that little attention had been paid to developing a school language policy in accordance with the new Language in Education Policy of July 1997. This policy promotes an additive approach to bilingualism and seeks to ensure that meaningful access to learning is provided for all children. By suggesting steps that could be taken by this school to develop their own language policy, the study highlights the necessity of recognising and remedying the gaps between policy and practice in the issue of language rights, identity and education in general.
- Full Text:
- Date Issued: 2002
Process for the preparation of vanillin from a mixed m-cresol/p-cresol stream
- Authors: Buddoo, Subash
- Date: 2002
- Subjects: Vanillin
- Language: English
- Type: Thesis , Masters , MTech (Chemistry)
- Identifier: vital:10968 , http://hdl.handle.net/10948/138 , Vanillin
- Description: The Vanillin project was undertaken by AECI as it was believed that with the raw materials available from SASOL i.e. cresols, it would be possible to develop a process that would be globally competitive. A process for preparing both vanillin and ethyl vanillin was developed by AECI’s Research and Development Department using a mixed m- and p-cresol stream as feed. The displacement of bromide by methoxide is very successful when using a dimethyl formamide (DMF)/alcohol solvent system and excellent conversions (>95%) and selectivities (>95%) may be obtained. However, the use of DMF, which poses a serious chronic health risk, is unacceptable in this process since the products are intended for use as food and flavouring chemicals. In view of the above the main objectives of this study were: · To find a suitable alternative solvent system, which could produce comparable results while still being economically viable; · To develop an appropriate experimental protocol in the laboratory based on the alternative solvent system; · To determine the important reaction variables by conducting statistically designed experiments; · To optimise the reaction to produce a reproducible and robust experimental protocol; and · To test the reaction thoroughly at bench-scale level and to obtain experimental data for scale-up to pilot plant The most promising alternative solvent system was a methanol/methyl acetate mixture, which produced satisfactory results in the preliminary assessment (conversion of 98.3% and selectivity of 92.0%). DMA and acetonitrile also produced promising results but were not considered for further investigation because of toxicity and cost issues. A set of statistically designed experiments was carried out on the methanol/methyl acetate solvent system where four variables were tested i.e., substrate concentration, temperature, catalyst loading, and methanol to methyl acetate volume ratio. The experimentally determined response surface model showed that the most important variable was catalyst loading (63.2%) for conversion. With respect to selectivity, the most important variables were catalyst loading (31.9%) and methanol to methyl acetate ratio (33.1%). The optimum reaction conditions were as follows: · Temperature: 120°C · Methanol:methyl acetate: 15:1 vol/vol · Catalyst loading: 8 mol % to substrate · Substrate concentration: 22 %m/m on solvent · Catalyst: Copper(I) bromide · Sodium Equivalents: 2.7 wrt substrate · Time: 3 hours The optimum conditions were tested for reproducibility in a 1 Labmax pressure reactor. Replicated reactions, two at a 10% and two at a 20% substrate concentration gave conversions and selectivities all greater than 90%. Although the reaction mixture was a slurry at these concentrations, the reactions were very fast and virtually complete within the first hour (~95% conversion). Initial scale-up studies were conducted in an 8 Parr reactor where five reactions were carried out using the optimum conditions described above. The conversion of substrate and vanillin selectivity was consistently high and compared favourably to the Labmax reactions. The average conversion was 97.3% (96.3 to 98.5%) at an average selectivity of 98.2% (97.4 to 99.1%). A study of the reaction kinetics confirmed that the reaction was first order with respect to the substrate as a plot of substrate concentration versus reaction rate gave a straight line. The rate constant was calculated as 1.1096 k(h-1). The reaction mechanism proposed for the copper assisted nucleophilic aromatic substitution involves the formation of an adduct between sodium methoxide, methyl acetate and copper(I) bromide. The formation of a transient intermediate with the substrate allows intramolecular delivery of the methoxide ion to the aryl moiety through a CuI – CuIII type cycle.
- Full Text:
- Date Issued: 2002
- Authors: Buddoo, Subash
- Date: 2002
- Subjects: Vanillin
- Language: English
- Type: Thesis , Masters , MTech (Chemistry)
- Identifier: vital:10968 , http://hdl.handle.net/10948/138 , Vanillin
- Description: The Vanillin project was undertaken by AECI as it was believed that with the raw materials available from SASOL i.e. cresols, it would be possible to develop a process that would be globally competitive. A process for preparing both vanillin and ethyl vanillin was developed by AECI’s Research and Development Department using a mixed m- and p-cresol stream as feed. The displacement of bromide by methoxide is very successful when using a dimethyl formamide (DMF)/alcohol solvent system and excellent conversions (>95%) and selectivities (>95%) may be obtained. However, the use of DMF, which poses a serious chronic health risk, is unacceptable in this process since the products are intended for use as food and flavouring chemicals. In view of the above the main objectives of this study were: · To find a suitable alternative solvent system, which could produce comparable results while still being economically viable; · To develop an appropriate experimental protocol in the laboratory based on the alternative solvent system; · To determine the important reaction variables by conducting statistically designed experiments; · To optimise the reaction to produce a reproducible and robust experimental protocol; and · To test the reaction thoroughly at bench-scale level and to obtain experimental data for scale-up to pilot plant The most promising alternative solvent system was a methanol/methyl acetate mixture, which produced satisfactory results in the preliminary assessment (conversion of 98.3% and selectivity of 92.0%). DMA and acetonitrile also produced promising results but were not considered for further investigation because of toxicity and cost issues. A set of statistically designed experiments was carried out on the methanol/methyl acetate solvent system where four variables were tested i.e., substrate concentration, temperature, catalyst loading, and methanol to methyl acetate volume ratio. The experimentally determined response surface model showed that the most important variable was catalyst loading (63.2%) for conversion. With respect to selectivity, the most important variables were catalyst loading (31.9%) and methanol to methyl acetate ratio (33.1%). The optimum reaction conditions were as follows: · Temperature: 120°C · Methanol:methyl acetate: 15:1 vol/vol · Catalyst loading: 8 mol % to substrate · Substrate concentration: 22 %m/m on solvent · Catalyst: Copper(I) bromide · Sodium Equivalents: 2.7 wrt substrate · Time: 3 hours The optimum conditions were tested for reproducibility in a 1 Labmax pressure reactor. Replicated reactions, two at a 10% and two at a 20% substrate concentration gave conversions and selectivities all greater than 90%. Although the reaction mixture was a slurry at these concentrations, the reactions were very fast and virtually complete within the first hour (~95% conversion). Initial scale-up studies were conducted in an 8 Parr reactor where five reactions were carried out using the optimum conditions described above. The conversion of substrate and vanillin selectivity was consistently high and compared favourably to the Labmax reactions. The average conversion was 97.3% (96.3 to 98.5%) at an average selectivity of 98.2% (97.4 to 99.1%). A study of the reaction kinetics confirmed that the reaction was first order with respect to the substrate as a plot of substrate concentration versus reaction rate gave a straight line. The rate constant was calculated as 1.1096 k(h-1). The reaction mechanism proposed for the copper assisted nucleophilic aromatic substitution involves the formation of an adduct between sodium methoxide, methyl acetate and copper(I) bromide. The formation of a transient intermediate with the substrate allows intramolecular delivery of the methoxide ion to the aryl moiety through a CuI – CuIII type cycle.
- Full Text:
- Date Issued: 2002
An investigation into the conflict management styles used in organisations with special reference to some organisations in the northern region of the Eastern Cape Province
- Authors: Bwowe, Patrick W
- Date: 2002
- Subjects: Conflict management -- South Africa -- Eastern Provice
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10911 , http://hdl.handle.net/10948/103 , Conflict management -- South Africa -- Eastern Provice
- Description: common and in most cases unavoidable. Because of this, it has become critical for managers to start evaluating the styles they use in managing conflict and to assess the implications of these styles to the benefits and costs of conflict. In order to meet this challenge, managers must understand the nature, sources and the outcome of conflict. It is by reflecting on the above, that managers may become more informed about the right conflict management approach to apply. This research deals with an investigation into the conflict management styles used by managers in organisations. It seeks to identify the styles currently used and to establish whether there is any correlation between these styles and the conflict management styles identified in the literature survey. The study targeted six health institutions in the Northern Region of the Eastern Cape Province. Findings from the literature study revealed two main approaches to managing conflict. These were: the Resolution and the Stimulating approaches. Five conflict management styles were identified when the resolution technique is used. These included: Collaboration, Avoidance, Accommodating, Compromise and the Dominating styles. Five approaches for stimulating functional conflict in organisations were also identified.They included the following: use of programmed conflict, manipulation of communication channels, encouraging competition among employees, encouraging the use structured debates and changing the organisational structure and culture. A research questionnaire and personal interviews were used for collecting data. The Questionnaire sought to establish the conflict management styles currently used in organisations while the interview’s aim was to probe deeper and to establish the participants’ view of the factors which determine one’s preferred conflict handling style and also to assess to what extent managers understand contemporary approaches to managing conflict such as conflict stimulation. The study revealed that the conflict management styles used by managers are similar to those identified in the literature review. It also emerged that managers are not very knowledgeable about the view of managing conflict by stimulating it. This highlighted the importance for further research into managing conflict by means of the stimulation approach.
- Full Text:
- Date Issued: 2002
- Authors: Bwowe, Patrick W
- Date: 2002
- Subjects: Conflict management -- South Africa -- Eastern Provice
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:10911 , http://hdl.handle.net/10948/103 , Conflict management -- South Africa -- Eastern Provice
- Description: common and in most cases unavoidable. Because of this, it has become critical for managers to start evaluating the styles they use in managing conflict and to assess the implications of these styles to the benefits and costs of conflict. In order to meet this challenge, managers must understand the nature, sources and the outcome of conflict. It is by reflecting on the above, that managers may become more informed about the right conflict management approach to apply. This research deals with an investigation into the conflict management styles used by managers in organisations. It seeks to identify the styles currently used and to establish whether there is any correlation between these styles and the conflict management styles identified in the literature survey. The study targeted six health institutions in the Northern Region of the Eastern Cape Province. Findings from the literature study revealed two main approaches to managing conflict. These were: the Resolution and the Stimulating approaches. Five conflict management styles were identified when the resolution technique is used. These included: Collaboration, Avoidance, Accommodating, Compromise and the Dominating styles. Five approaches for stimulating functional conflict in organisations were also identified.They included the following: use of programmed conflict, manipulation of communication channels, encouraging competition among employees, encouraging the use structured debates and changing the organisational structure and culture. A research questionnaire and personal interviews were used for collecting data. The Questionnaire sought to establish the conflict management styles currently used in organisations while the interview’s aim was to probe deeper and to establish the participants’ view of the factors which determine one’s preferred conflict handling style and also to assess to what extent managers understand contemporary approaches to managing conflict such as conflict stimulation. The study revealed that the conflict management styles used by managers are similar to those identified in the literature review. It also emerged that managers are not very knowledgeable about the view of managing conflict by stimulating it. This highlighted the importance for further research into managing conflict by means of the stimulation approach.
- Full Text:
- Date Issued: 2002
The molecular microbial ecology of sulfate reduction in the Rhodes BioSURE process
- Authors: Chauke, Chesa Gift
- Date: 2002
- Subjects: Water -- Purification -- Biological treatment , Acid mine drainage , Water -- Microbiology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4082 , http://hdl.handle.net/10962/d1007475 , Water -- Purification -- Biological treatment , Acid mine drainage , Water -- Microbiology
- Description: The research reported here investigated the use of a Baffle Reactor in order to study aspects of the biological sulfur cycle, where a floating sulfur biofilm formation occurs and where complex organic compounds provide electron donor sources. The development of a laboratory-scale Baffle Reactor model system satisfied the requirements for sulfate reducing bacterial biomass growth and sulfur biofilm formation. Since relatively little is known about the microbial ecology of floating sulfur biofilm systems, this study was undertaken to describe the sulfate reducing sludge population of the system together with its performance. A combination of culture- and molecular-based techniques were applied in this study in order to investigate the microbial ecology of the sulfate-reducing bacteria component of the system. These techniques enabled the identification and the analysis of the distribution of different sulfate reducing bacterial strains found within the sludge bioreactors. Strains isolated from the sludge were characterised based on culture appearance, gram staining and scanning electron microscopy morphology. Molecular methods based on the PCR-amplified 16S rRNA including denaturing gradient gel electrophoresis were employed in order to characterise sulfate-reducing bacteria within the reactors. Three novel Gram negative sulfate-reducing bacteria strains were isolated from the sludge population. Strains isolated were tentatively named Desulfomonas rhodensis, Desulfomonas makanaiensis, and Clostridium sulforhodensis. Results obtained from the Baffle Reactor showed that three dominant species were isolated from the DNA extracted from the whole bacterial population by peR. Three of these were similar to those mentioned above. The presence of these three novel unidentified species suggest that there are a range of other novel organisms involved in sulfate reduction processes.
- Full Text:
- Date Issued: 2002
- Authors: Chauke, Chesa Gift
- Date: 2002
- Subjects: Water -- Purification -- Biological treatment , Acid mine drainage , Water -- Microbiology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4082 , http://hdl.handle.net/10962/d1007475 , Water -- Purification -- Biological treatment , Acid mine drainage , Water -- Microbiology
- Description: The research reported here investigated the use of a Baffle Reactor in order to study aspects of the biological sulfur cycle, where a floating sulfur biofilm formation occurs and where complex organic compounds provide electron donor sources. The development of a laboratory-scale Baffle Reactor model system satisfied the requirements for sulfate reducing bacterial biomass growth and sulfur biofilm formation. Since relatively little is known about the microbial ecology of floating sulfur biofilm systems, this study was undertaken to describe the sulfate reducing sludge population of the system together with its performance. A combination of culture- and molecular-based techniques were applied in this study in order to investigate the microbial ecology of the sulfate-reducing bacteria component of the system. These techniques enabled the identification and the analysis of the distribution of different sulfate reducing bacterial strains found within the sludge bioreactors. Strains isolated from the sludge were characterised based on culture appearance, gram staining and scanning electron microscopy morphology. Molecular methods based on the PCR-amplified 16S rRNA including denaturing gradient gel electrophoresis were employed in order to characterise sulfate-reducing bacteria within the reactors. Three novel Gram negative sulfate-reducing bacteria strains were isolated from the sludge population. Strains isolated were tentatively named Desulfomonas rhodensis, Desulfomonas makanaiensis, and Clostridium sulforhodensis. Results obtained from the Baffle Reactor showed that three dominant species were isolated from the DNA extracted from the whole bacterial population by peR. Three of these were similar to those mentioned above. The presence of these three novel unidentified species suggest that there are a range of other novel organisms involved in sulfate reduction processes.
- Full Text:
- Date Issued: 2002
Physiological and perceptual responses of SANDF personnel to varying combinations of marching speed and backpack load
- Authors: Christie, Candice Jo-Anne
- Date: 2002
- Subjects: Marching -- Physiological aspects , Walking -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5128 , http://hdl.handle.net/10962/d1005207 , Marching -- Physiological aspects , Walking -- Physiological aspects
- Description: The objective of the present study was to establish effective combinations of marching speed and backpack load in order to meet specific military requirements. Thirty infantrymen from the South African National Defence Force (SANDF) comprised the sample and experimental procedures were conducted in a laboratory setting using a Cybex Trotter treadmill. Sixteen conditions were set up which included combinations of four speeds (3.5, 4.5, 5.5, and 6.5 km.h⁻¹) and four backpack loads (20, 35, 50, and 65kg). Each subject was required to complete 8 of the sixteen conditions, each consisting of a six-minute treadmill march. Physiological data (heart rate, ventilation and metabolic responses), kinematic gait responses (step-rate and stride length) and perceptions of exertion (“Central” and “Local” RPE) were collected during the third and sixth minutes of the treadmill march and areas of body discomfort were identified post-march. Responses revealed five distinct categories of exertional strain. Three marches constituted “nominal” (below 40% VO₂max) and three “excessive” strain (above 75% VO₂ max). These represent combinations of extreme military demands and are highly unlikely to be utilised by the military. Three “tolerable” levels of required effort were recommended and these 10 combinations were further divided into three sub-categories. The “moderate” stress marches were identified as “ideal” for prolonged marches and had statistically similar responses of working heart rates (range of 118 bt.min⁻¹ to 127 bt.min⁻¹), energy expenditure (26 kJ.min⁻¹ and 27 kJ.min⁻¹) and ratings of perceived exertion (“Central” ratings of 10 and 11). Thus, marching at 5.5 km.h⁻¹with 20kg, 4.5 km.h⁻¹ with 35kg or 3.5 km.h⁻¹ with 50kg all require a similar energy cost. Four “heavy” category marches were identified for possible use when the duration of the march is reduced. During these marches responses were statistically similar with heart rates ranging from 127 bt.min⁻¹ to 137 bt.min⁻¹, energy expenditure from 32 kJ.min⁻¹ to 37 kJ.min⁻¹ and “Central” ratings of perceived exertion were 12 and 13. When short, high intensity marches are necessary, then combinations from the “very heavy” category may be utilised but with caution. During these marches, soldiers were taxed between 65% and 75% of VO2 max. The results of this study clearly demonstrate that the interplay between speed and load needs to be adjusted when determining “ideal” combinations for specific military demands. Essentially, if speed is of the essence then load must be reduced, and if heavy loads need to be transported then speed must be reduced.
- Full Text:
- Date Issued: 2002
- Authors: Christie, Candice Jo-Anne
- Date: 2002
- Subjects: Marching -- Physiological aspects , Walking -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5128 , http://hdl.handle.net/10962/d1005207 , Marching -- Physiological aspects , Walking -- Physiological aspects
- Description: The objective of the present study was to establish effective combinations of marching speed and backpack load in order to meet specific military requirements. Thirty infantrymen from the South African National Defence Force (SANDF) comprised the sample and experimental procedures were conducted in a laboratory setting using a Cybex Trotter treadmill. Sixteen conditions were set up which included combinations of four speeds (3.5, 4.5, 5.5, and 6.5 km.h⁻¹) and four backpack loads (20, 35, 50, and 65kg). Each subject was required to complete 8 of the sixteen conditions, each consisting of a six-minute treadmill march. Physiological data (heart rate, ventilation and metabolic responses), kinematic gait responses (step-rate and stride length) and perceptions of exertion (“Central” and “Local” RPE) were collected during the third and sixth minutes of the treadmill march and areas of body discomfort were identified post-march. Responses revealed five distinct categories of exertional strain. Three marches constituted “nominal” (below 40% VO₂max) and three “excessive” strain (above 75% VO₂ max). These represent combinations of extreme military demands and are highly unlikely to be utilised by the military. Three “tolerable” levels of required effort were recommended and these 10 combinations were further divided into three sub-categories. The “moderate” stress marches were identified as “ideal” for prolonged marches and had statistically similar responses of working heart rates (range of 118 bt.min⁻¹ to 127 bt.min⁻¹), energy expenditure (26 kJ.min⁻¹ and 27 kJ.min⁻¹) and ratings of perceived exertion (“Central” ratings of 10 and 11). Thus, marching at 5.5 km.h⁻¹with 20kg, 4.5 km.h⁻¹ with 35kg or 3.5 km.h⁻¹ with 50kg all require a similar energy cost. Four “heavy” category marches were identified for possible use when the duration of the march is reduced. During these marches responses were statistically similar with heart rates ranging from 127 bt.min⁻¹ to 137 bt.min⁻¹, energy expenditure from 32 kJ.min⁻¹ to 37 kJ.min⁻¹ and “Central” ratings of perceived exertion were 12 and 13. When short, high intensity marches are necessary, then combinations from the “very heavy” category may be utilised but with caution. During these marches, soldiers were taxed between 65% and 75% of VO2 max. The results of this study clearly demonstrate that the interplay between speed and load needs to be adjusted when determining “ideal” combinations for specific military demands. Essentially, if speed is of the essence then load must be reduced, and if heavy loads need to be transported then speed must be reduced.
- Full Text:
- Date Issued: 2002
Towards a broader socio-ecological education : a case study of school based curricular reform
- Authors: Cimma, Gary Martin
- Date: 2002
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:20973 , http://hdl.handle.net/10962/5763
- Description: This work documents and analyses an action research project that the researcher undertook in conjunction with colleagues at an independent Catholic high school in Johannesburg. The main objective was to try to expand the existing curriculum in operation at the time of starting the research to one, which was more socio-ecologically sensitive. One of the key references during the action research was the recently drafted ‘Vision Statement’ document, which detailed the educational ideals of the school. Some of the key findings that emerged as the research proceeded, were that the levels of socio-ecological sensitivity displayed by the learners were influenced by the backgrounds from which they came, and that these background environments were often not comfortable with the changes taking place in the educational and greater South African environments. The Participatory Action Research mode of research which was used proved to be problematic in that only a handful of the educators actually got involved in participating in the project. The failure of many of educators to get involved was, in the opinion of the researcher, due to their lack of understanding how important the development of social and ecological sensitivity are to the necessary change capacity required in present day South African society. The need to be involved in the ongoing development of curriculum as required by Curriculum 2005 as a form of Outcomes Based Education was also problematic as some educators were not familiar with their role in this regard. The limited time-span of the research was also a limiting factor as the development of a socio-ecologically sensitive curriculum required changes in some fundamental attitudes and approaches to education and the environment.
- Full Text:
- Date Issued: 2002
- Authors: Cimma, Gary Martin
- Date: 2002
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:20973 , http://hdl.handle.net/10962/5763
- Description: This work documents and analyses an action research project that the researcher undertook in conjunction with colleagues at an independent Catholic high school in Johannesburg. The main objective was to try to expand the existing curriculum in operation at the time of starting the research to one, which was more socio-ecologically sensitive. One of the key references during the action research was the recently drafted ‘Vision Statement’ document, which detailed the educational ideals of the school. Some of the key findings that emerged as the research proceeded, were that the levels of socio-ecological sensitivity displayed by the learners were influenced by the backgrounds from which they came, and that these background environments were often not comfortable with the changes taking place in the educational and greater South African environments. The Participatory Action Research mode of research which was used proved to be problematic in that only a handful of the educators actually got involved in participating in the project. The failure of many of educators to get involved was, in the opinion of the researcher, due to their lack of understanding how important the development of social and ecological sensitivity are to the necessary change capacity required in present day South African society. The need to be involved in the ongoing development of curriculum as required by Curriculum 2005 as a form of Outcomes Based Education was also problematic as some educators were not familiar with their role in this regard. The limited time-span of the research was also a limiting factor as the development of a socio-ecologically sensitive curriculum required changes in some fundamental attitudes and approaches to education and the environment.
- Full Text:
- Date Issued: 2002