A novel o/w microemulsion fixed dose combination of efavirenz, emtricitabine and tenofovir disoproxil fumarate: development and characterisation
- Authors: Mabvira, Samantha
- Date: 2022-04-06
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/232925 , vital:50038
- Description: Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2022
- Full Text:
- Date Issued: 2022-04-06
Formulation and optimization of lamotrigine liquid loaded self-microemulsifying emulsion
- Authors: Mano, Tanaka
- Date: 2021-10-29
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192430 , vital:45225
- Description: Thesis (MSc (Pharm)) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- Date Issued: 2021-10-29
The development, formulation and characterisation of sustained-release minoxidil-loaded nanostructured lipid carriers for topical delivery
- Authors: Daya, Misha
- Date: 2021-10-29
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192397 , vital:45222
- Description: Thesis (MSc (Pharm)) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- Date Issued: 2021-10-29
Application of quality by design to the manufacture of a multiparticulate prednisone dosage form
- Authors: Manda, Arthur
- Date: 2020-04
- Subjects: Drugs -- Quality control , Drugs -- Design -- Quality control , Drugs -- Dosage forms , Drug development -- Quality control , Pharmaceutical industry -- Quality control , Prednisone , High throughput screening (Drug development)
- Language: English
- Type: text , Thesis , Masters , MSc (Pharmacy)
- Identifier: http://hdl.handle.net/10962/117986 , vital:34583
- Description: For many years, quality by testing was the only approach to guarantee quality of drug products before the Food and Drug Administration launched the concept of current Good Manufacturing Practice. In order to gain more knowledge of the manufacturing process, a new system known as Quality by Design was introduced into the pharmaceutical industry. Quality by Design is based on thorough understanding of how materials, process parameters and interaction thereof impact final product quality. Quality by Design is a systematic approach to product development which ensures that quality is built into a product during product development and not just tested into it. The aim of Quality by Design is to achieve optimum product quality with consistent dosage form performance and minimal risk of failure in patients. The objective of these studies was to implement a Quality by Design approach to establish a design space for the development and manufacture of a safe, effective and stable multi-partite solid oral dosage form for prednisone as an alternative to currently marketed prednisone formulations. Multi-particulate dosage forms offer significant advantages over conventional technologies. In addition to lowering the incidence of gastrointestinal irritation they exhibit a reduced risk of dose dumping and a large surface area which favours dissolution. Furthermore, their free flowing nature facilitates reproducible capsule filling and consequently uniformity of dosing. Different multi-particulate dosage forms exist however a multiple-unit pellet system was investigated during these studies. Quality by Design principles were used to develop and establish a reversed-phase high performance liquid chromatographic method for quantifying prednisone from solid oral dosage forms. A Central Composite Design was used to generate multivariate experiments and to investigate the impact of input variables on the quality and performance of the analytical method. The optimized method was validated according to International Council for Harmonization guidelines and was found to be linear, precise, accurate and specific for the quantitation of prednisone. Pre-formulation studies were conducted and included the assessment of particle size, particle shape, powder flow properties and compatibility studies. Carr’s index, Hausner ratio and the Angle of Repose were used to evaluate powder flow properties and results generated from all studies suggest the need for adding a glidant and lubricant to improve pellet flow. The images generated from Scanning Electron Microscopy were used to analyze particle shape and size. Differential Scanning Calorimetry and Fourier Transform Infrared Spectroscopy were used to evaluate API-excipient compatibility. All excipients investigated were found to be compatible with prednisone and suitable for formulation development studies. Extrusion-spheronization was used to manufacture prednisone pellets. Extrusion-spheronization is a multi-step process involving many factors. Quality risk management tools particularly an Ishikawa Fishbone (cause and effect) diagram and failure mode and effects analysis were used to narrow down potentially significant factors to a reasonable number that could be investigated experimentally. Risk priority numbers were used to quantify risk and factors above a set threshold value were considered to be of high risk. A total of eleven risk factors were identified as high. A Plackett-Burman study was conducted to narrow down the eleven high risk factors to identify the most impactful factors viz., microcrystalline cellulose content, sodium starch glycolate content, extrusion speed and spheronization time. Evaluation of four factors was carried over to optimization studies using a Box-Behnken Design and following identifaction of the optimum process settings and excipient content a design space for the manufacture of a multi-partite dosage form containing prednisone was established.
- Full Text:
- Date Issued: 2020-04
Formulation development, manufacture and evaluation of a lamivudine-zidovudine nano co-crystal thermo-responsive suspension
- Authors: Witika, Bwalya Angel
- Date: 2020
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/140546 , vital:37897 , http://dx.doi.org/10.21504/10962/140546
- Description: Expected release date-April 2021
- Full Text:
- Date Issued: 2020
Formulation, development and assessment of an orodispersible taste masked sildenafil film for paediatric use
- Authors: Naidu, Hariska
- Date: 2019
- Language: English
- Type: text , Thesis , Masters , MPharm
- Identifier: http://hdl.handle.net/10962/97635 , vital:31466
- Description: Expected release date-April 2021
- Full Text: false
- Date Issued: 2019
Development and assessment of a smart thermosetting intranasal hydrogel for lamotrigine
- Authors: Melamane, Siyabonga
- Date: 2018
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/62975 , vital:28349
- Description: Expected release date-April 2020
- Full Text:
- Date Issued: 2018
Development and assessment of gastroretentive sustained release captopril micro-balloons
- Authors: Oridota, Omoyosola Omolola
- Date: 2018
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63491 , vital:28419
- Description: Expected release date-April 2020
- Full Text:
- Date Issued: 2018
Formulation, characterisation and optimisation of self-nanoemulsifying drug delivery systems (SNEDDS) loaded with artemether and lumefantrine
- Authors: Mudyahoto, Tsitsi
- Date: 2018
- Subjects: Uncatalogued
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63503 , vital:28422
- Description: Expected release date-April 2020
- Full Text:
- Date Issued: 2018
The development, manufacture and assessment of solid dispersions of gliclazide
- Authors: Govere, Grace Shalom
- Date: 2018
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63390 , vital:28405
- Description: Expected release date-April 2020
- Full Text:
- Date Issued: 2018
The development, manufacture and evaluation of a selfmicro-emulsifying drug delivery system for efavirenz
- Authors: Musakana, Tanyaradzwa Gracious
- Date: 2018
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/62643 , vital:28223
- Description: Expected release date-April 2020
- Full Text:
- Date Issued: 2018
Development and assessment of ketoconazole intravaginal thermosetting hydrogel formulations
- Authors: Ramanah, Ashmita
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/5198 , vital:20785
- Description: Imidazole compounds are commonly used as antifungal therapies and ketoconazole was the first broad spectrum orally active azole identified and registered. However, the risks of hepatotoxicity and drug interactions following systemic delivery and absorption of ketoconazole outweigh the therapeutic benefits and ketoconazole was therefore discontinued as first line systemic antifungal therapy in many countries. Although not yet banned in South Africa, the South African Medicine Formulary has ceased to recommend the use of ketoconazole for systemic treatment. Topical use of ketoconazole is, however, regarded as safe following extensive human use as low systemic absorption occurs following topical administration. Vulvo-vaginal candidiasis is a yeast infection that affects a large number of women, some of whom present with several infections annually. The topical treatment options for vulvo-vaginal candidiasis include the use of vaginal tablets, capsules, ovules and creams administered as a single dose or one to three times daily for three to fourteen days either alone or in combination with another dosage form depending on the regimen. Administration of the dose nightly is recommended for most vaginal creams and ovule formulation due to leakage and the uncomfortable feel of the dosage form if administered during the day. A thermosetting gel that remains in the vagina following administration and prolongs the release of ketoconazole from a once daily dose would be a useful addition to the arsenal for intra-vaginal antifungal therapy. Thermosetting gels would be more comfortable to administer as the gel would set in a form similar to naturally occurring mucous in the vagina and, if formulated with a low pH, irritation of the sensitive and fissured tissue would be minimised. A further benefit would be that once set the gel would loosely take on the anatomical shape of the vagina. A simple, precise, accurate, reproducible and sensitive stability-indicating reversed phase-high performance liquid chromatographic method using ultraviolet detection for the quantitation of ketoconazole was developed and validated. The method was specific and was applied to the determination of ketoconazole in commercial and experimental formulations in addition to samples from degradation studies and in vitro release testing. Product performance characteristics of commercial products were investigated with the goal to provide a strategy for the development of a novel intra vaginal gel in the shortest possible time. Characterisation of Xolegel®, Kez® shampoo and Ketazol® cream included an evaluation of pH, viscosity and assay, in addition to spectroscopic and thermal analysis, to identify ideal characteristics of topical products that could be used as targets during formulation development of the gel. An in vitro release method was developed and validated for precision and accuracy and the in vitro release profiles of commercial ketoconazole products were compared using analysis of variance, model dependent and independent approaches. Ketoconazole release data from test gel manufactured during formulation development were investigated to obtain information about the relationship between formulation content and drug release. Poloxamers marketed as Pluronic® and Lutrol® are synthetic non-ionic tri-block copolymers that consist of hydrophobic propylene oxide and hydrophilic polyethylene oxide blocks, which in solution interact to exhibit thermo-reversible behaviour. In situ forming hydrogels consisting of poloxamers, more specifically poloxamer 407, are activated following a temperature stimulus and undergo a sol to gel transition. This approach was used to produce a thermosetting vaginal gel that would exhibit a long residence time in the vagina with an associated enhancement of therapeutic efficacy. Ketoconazole- excipient compatibility was investigated during preformulation studies using spectroscopic and thermal analysis to enable the selection of excipients best suited for the production of a novel dosage form prior to formulation development activities. No obvious interactions between ketoconazole and excipient were observed and ketoconazole was found in an amorphous form when in combination with polysorbate 80 and poloxamers. A two-level factorial design was used to produce solvent systems with different amounts of polysorbate 80, citric acid and ethanol to identify a vehicle in which ketoconazole exhibited optimum solubility and at a pH that would be least irritating to the vaginal mucosa with a low content of excipients. The optimised vehicle consisted of 4% m/v citric acid, 1.5% v/v polysorbate 80 and 9.5% v/v ethanol made up to 50 g with citrate-phosphate buffer adjusted to pH 5.0, resulted in a vehicle of pH of 3.5 in which 71.41 mg of ketoconazole was dissolved per mL. A Central Composite Design was used to evaluate compositions for the modulation of viscosity of the thermosetting dosage form such that it was a liquid at 22 °C that rapidly formed a stiff gel when heated to 37 °C (intra-vaginal temperature) using different amounts of the poloxamer grades 407, 188 and 237. Thermosetting gels containing 2% m/v ketoconazole were manufactured using specifications generated using the Central Composite Design and the viscosity at 22 °C and 37 °C, solution to gel transition time, potency and ketoconazole release at 24, 48 and 72 hours investigated. Contour and three-dimensional response surface plots and mathematical relationships with target ranges set for responses were identified and with the aid of Central Composite Design the optimisation of a desirable thermosetting gel was achieved. The optimised composition included 16% m/v poloxamer 407, 10% m/v poloxamer 188 and 6% m/v poloxamer 237 in the gel that was used as the basis for further optimisation studies. The low ketoconazole release for ketoconazole observed indicated that the poloxamers had formed a gel matrix that sustained the release of ketoconazole and would therefore ensure that once daily administration of the gel was possible. The sol-gel transition test may be used as a simple and cheap alternative to viscosity testing for thermosetting formulations when expensive viscometers and rheometers are unavailable and was successfully used for this purpose.Ketoconazole is photolabile and is prone to degradation in aqueous solutions. The hydrophobic core of micelles formed in these dosage forms are believed to shield ketoconazole molecules and improve stability in aqueous solutions and acidic gels. The thermosetting gel optimised for poloxamer content was subjected to a further Central Composite Design in which sodium metabisulphite content and vehicle pH were investigated. The length of storage was used as a numeric variable and storage condition as a categoric variable at two levels to monitor the stability of the gels. The formulations were investigated at sample times of 0, 1, 2, 4 and 8 weeks at 5 °C, 25 °C and 40 °C. The use of a Central Composite Design facilitated an understanding of the interactions between input variables and their impact on the responses analysed including ketoconazole content, release at 24, 48 and 72 hours, gel pH and viscosity at 22 °C and 37 °C. Design of Experiments may be used as a rapid cost effective tool for an overall assessment of the stability of novel topical dosage forms. However, a more thorough assessment of stability may be required for product registration. Ketoconazole was found to be unstable in the acidic thermosetting gels despite the addition of antioxidant. The gels in liquid form at 5 °C and 25 °C have a low number of micelles for ketoconazole incorporation and therefore additional optimisation studies would be required to enhance the shelf-life of this product.
- Full Text:
- Date Issued: 2017
Formulation, development and evaluation of lipid nanocarriers for minocycline hydrochloride
- Authors: Ranchhod, Janeeta
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65234 , vital:28712
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
Preparation and evaluation of captopril - ion exchange resin complexes
- Authors: Chikukwa, Mellisa Tafadzwa Ruramai
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/59146 , vital:27441
- Description: Restricted access-thesis embargoed for 2 years
- Full Text:
- Date Issued: 2017
The development, manufacture and characterisation of niosomes intended to deliver nevirapine to the brain
- Authors: Witika, Bwalya Angel
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65257 , vital:28715
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
The development of captopril pellets using the principles of quality by design
- Authors: Veerubhotla, Hari Mani Krishna
- Date: 2016
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/64769 , vital:28599
- Description: Expected release date-May 2018
- Full Text:
- Date Issued: 2016
Development, assessment and optimisation of oral famciclovir formulations for paediatric use
- Authors: Magnus, Laura
- Date: 2012
- Subjects: Drugs -- Dosage forms , Drugs -- Analysis , Capsules (Pharmacy) , Antiviral agents , Pediatrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3870 , http://hdl.handle.net/10962/d1018244
- Description: Many Active Pharmaceutical Ingredients (API) such as the antiviral agent famciclovir (FCV) are required for paediatric treatment but are not commercially available in age-appropriate dosage forms. It is common practice to prepare oral liquid dosage forms using commercially available tablets, capsules or powdered API and then dispersing or dissolving the crushed and/or powdered materials in a vehicle that the patient can swallow. Vehicles that are commonly used for this purpose include methylcellulose, syrup or combinations of these carriers where possible or commercially available suspending agents such as Ora-Sweet®, if available, can be used. However, several critical factors are overlooked when manufacturing extemporaneous formulations including, but not limited to, physical and chemical properties of the API, excipients, compatibility, stability and bioavailability issues. A stability-indicating High Performance Liquid Chromatography (HPLC) method for the analysis of FCV was developed and validated according to the International Conference on Harmonization (ICH) guidelines. The method is sensitive, selective, precise, accurate and linear over the concentration range 2-120 μg/ml. The stability of 25 mg/ml FCV formulations was assessed in vehicles manufactured from syrup simplex, hydroxypropyl methylcellulose (HPMC), Ora-Sweet® and an aqueous buffer (pH 6) following storage at 25 °C/60% RH and 40 °C/75% RH over six (6) to eight (8) weeks. The shelf life of the products was calculated as the longest period of storage for approximately 90% of the added FCV to be recovered. Formulations were manufactured using syrup simplex or HPMC with methylparaben and propylparaben individually or in combination and with sodium metabisulphite, ascorbic acid or citric acid as antioxidants. The resultant products were subject to quality control analysis for API content, viscosity, pH and appearance and the resultant data were subject to statistical analysis. The degradation rates were calculated for each product and a degradation profile plotted. The degradation rates of FCV in extemporaneous formulations were compared to those of FCV manufactured using a commercially available suspending agent and a buffered vehicle. FCV undergoes major degradation in the presence of sucrose, as observed for formulations in which the vehicle was syrup and Ora-Sweet®. FCV was found to be most stable when dissolved/dispersed in an HPMC vehicle incorporating sodium metabisulphite and a combination of parabens. The formulation that exhibited the maximum stability was manufactured using an aqueous solution buffered to pH 6. Due to the enhanced stability of FCV when added to a buffered vehicle a formulation in which an HPMC vehicle buffered to pH 6 with sodium metabisulphite, methylparaben and propylparaben was selected for optimisation using a Central Composite Design approach (CCD). In this way it was possible to establish a relationship between input variables such as pH, % w/v HPMC, % w/v antioxidant and % w/v preservative and the responses selected for monitoring by means of response surface modelling. A quadratic model was found to be the most appropriate to describe the relationship between input and output variables. Thirty batches of product were randomly manufactured according to the CCD and analysed to establish the stability in respect of viscosity, pH and the amount of FCV remaining following storage and the data were fitted to models using Design-Expert® software. A correlation between input variables and the responses was best described by a quadratic polynomial model. Analysis of Variance indicated that the response surface models were significant (P-value < 0.0001). The pH to which a FCV formulation was buffered was the most significant factor to effect the % drug content and the ultimate pH of the formulation, while the % w/v HPMC had the most significant effect on the viscosity of the product. The optimum composition for the manufacture of an oral liquid FCV formulation was predicted using the optimisation function of the Design-Expert® software. A low % error of prediction was established, indicating that the model is robust and that RSM is an appropriate formulation optimisation tool as it has a high prognostic ability. A liquid FCV formulation was developed, optimised and found to be suitable for its intended purpose. However further optimisation is required in respect of colourants, sweeteners and/or flavourants. The approach followed is useful in ensuring the development of quality products and can be applied in future.
- Full Text:
- Date Issued: 2012
An investigation into the feasibility of incorporating didanosine into innovative solid lipid nanocarriers
- Authors: Wa Kasongo, Kasongo
- Date: 2010
- Subjects: Antiretroviral agents HIV infections -- Drug testing Didanosine Nanoparticles Drug delivery systems Nanostructured materials Lipids -- Therapeutic use
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3800 , http://hdl.handle.net/10962/d1003278
- Description: The research undertaken in these studies aimed to investigate the feasibility of developing and manufacturing innovative solid lipid carriers, such as solid lipid nanoparticles (SLN) and/or nanostructured lipid carriers (NLC) using a hot high pressure homogenization method, for didanosine(DDI). In addition, studies using in vitro differential protein adsorption were undertaken to establish whether the SLN and/or NLC have the potential to deliver DDI to the central nervous system (CNS). Prior to initiating pre-formulation, formulation development and optimization studies of DDI-Ioaded SLN and/or NLC, it was necessary to develop and validate an analytical method for the in vitro quantitation and analysis of DDI. An accurate, precise and sensitive RP-HPLC method with UV detection set at 248 nm was developed, optimized and validated for the quantitative in vitro analysis of DDI in formulations. Pre-formulation studies were designed to evaluate the thermal stability of DDI and to select and characterize lipid excipients that may be used for the manufacture of the nanocarriers. It was established that DDI is thermostable at temperatures not exceeding 163°C and therefore a hot high pressure homogenization technique could be used to manufacture DDI-loaded SLN and/or NLC. Lipid screening studies revealed that DDI is poorly soluble in both solid and liquid lipids. A combination of Precirol® ATO 5 and Transcutol® HP was found to have the best solubilizing-potential for DDI of all lipids investigated. The inclusion of Transcutol® HP into Precirol® ATO 5 changed the polymorphic form of the solid lipid from the stable 13-modification to a material that exhibited the co-existence between α- and β-polymorphic forms. The relatively high solubility of DDI in Transcutol® HP compared to Precirol® ATO 5 was an indication that a solid lipid matrix prepared from a binary mixture of Precirol® ATO 5 and Transcutol® HP was likely to have a higher loading capacity and encapsulation efficiency for DDI than a matrix consisting of Precirol® ATO 5 alone. Furthermore, the potential for the solid lipid matrix to exist in the α- and/or β-modifications when Transcutol® HP was added to Precirol® ATO 5 suggested that expulsion of DDI from a solid lipid matrix during prolonged storage periods was likely to be minimal. Therefore it was considered logical to investigate the feasibility of incorporating DDI into NLC and not in SLN. However, due to the limited solubility of DDI in lipids, formulation development of DDI-loaded NLC commenced using small quantities of DDI. Formulation development and optimization studies of DDI-loaded NLC were initially aimed at selecting a surfactant system that was capable of stabilizing NLC in an aqueous environment. Solutol® HS alone or a ternary mixture consisting of Solutol® HS, Tween® 80 and Lutrol® F68 was found to stabilize the nanoparticles in terms of particle size and the polydispersity index. The use of the ternary mixture as the surfactant system was preferred to using Solutol® HS alone as Lutrol® F68 and especially Tween® 80 have been successfully used to target the delivery of API to the brain. Aqueous DDI-free and DDI-Ioaded NLC containing increasing amounts of DDI were manufactured using hot high pressure homogenization at 800 bar for three cycles. The NLC formulations were characterized in terms of particle size, polydispersity index, zeta potential, and polymorphism, degree of crystallinity, encapsulation efficiency (EE), shape and surface morphology. The mean particle size for all formulations was below 250 nm with narrow polydispersity indices, indicating that narrow particle size distribution had been achieved. The d99% values for all formulations tested, were generated using laser diffractometry, and were below 400 nm, with span values ranging from 0.84 - 1.19 also suggesting that a narrow particle size distribution had been achieved. The zeta potential values measured in double distilled water with the conductivity adjusted to 50 μS/cm ranged from -18.4 to -11.4 mV. In addition, all the formulations showed a decrease in the degree of crystallinity as compared to the bulk lipid material and WAXS shows that the formulations existed in a single β-modification form. Furthermore DDI that had been incorporated into the NLC appeared to be molecularly dispersed in the lipid matrices. These parameters remained unaffected for most formulations following storage for two months at 25°C. In addition these formulations contained a mixture of spherical and non-spherical particles irrespective of the amount of DDI that was added during the manufacture of the formulations. These studies showed that it was feasible to develop and incorporate small amounts of DDI into NLC. However in order to use these delivery systems for oral administration of DDI to paediatric patients, strategies to improve the amount of DDI that could be loaded into the particles and to achieve high encapsulation efficiencies had to be developed. The limited solubility of DDI in lipid media was identified as a major factor that affected the loading capacity and encapsulation efficiency of DDI in the NLC. Therefore, a novel strategy aimed at increasing the saturation solubility of DDI in the lipid by attempting to increase the dissolution velocity of the drug in the lipid using a particle size reduction approach, was designed and investigated. DDI was dispersed in Transcutol® HP and the particle size of DDI in the liquid lipid medium was reduced gradually using hot high pressure homogenization and the product obtained from these studies was used to manufacture DDI-loaded NLC using a cold high pressure homogenization procedure. Although the encapsulation efficiency and drug loading following use of this approach was relatively high, the particles were large and showed a tendency to grow in size leading to the formation of microparticles after storage for two months at 25°C. In addition, the degree of crystallinity of the nanoparticles increased rapidly over the same storage period which led to expulsion of DDI nanoparticles for the NLC, despite the DDI loading in NLC being unaffected. It was clearly evident that this new approach of manufacturing solid lipid nanocarriers could be used as a platform not only for enhancing the loading capacity of DDI in solid lipid nanocarriers but also for other hydrophilic drugs. Differential protein adsorption patterns of DDI-loaded NLC were generated in vitro using two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) in order to establish the potential for these systems to deliver DDI to the CNS. NLC formulations containing small amounts of DDI were used as these formulations showed a better stability profile than the formulation with a higher encapsulation efficiency and drug loading capacity. Furthermore, the encapsulation efficiency and drug loading of DDI were considered sufficient for use in 2-D PAGE studies. Data obtained from 2-D PAGE analysis reveal that DDI-loaded NLC preferentially adsorb proteins in vitro that are responsible for specific brain targeting in vivo. More importantly, these studies reveal that in addition to Tween® 80 that has already been shown to have the potential to target CDDS to the brain, Solutol® HS 15 has the potential to achieve a similar objective. Consequently, DDI-loaded NLC have the potential to deliver DDI to the brain and these results may be used as a platform for conducting in vivo studies to establish whether DDI can cross the blood brain barrier and enter the CNS when administered in NLC which may in turn lead to a major breakthrough in the management of HIV/AIDS and Aids Dementia Complex (ADC).
- Full Text:
- Date Issued: 2010
Formulation and evaluation of captopril loaded polymethacrylate and hydroxypropyl methycellulose microcapsules
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Date Issued: 2010
The use of response surface methodology and artificial neural networks for the establishment of a design space for a sustained release salbutamol sulphate formulation
- Authors: Chaibva, Faith Anesu
- Date: 2010
- Subjects: Salbutamol sulphate Artificial intelligence -- Medical applications Neural networks (Computer science) Response surfaces (Statistics) Pharmaceutical biotechnology -- Quality contro Drugs -- Design Pharmacokinetics Drugs -- Dosage forms Drugs -- Controlled release
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3845 , http://hdl.handle.net/10962/d1010432
- Description: Quality by Design (QbD) is a systematic approach that has been recommended as suitable for the development of quality pharmaceutical products. The QbD approach commences with the definition of a quality target drug profile and predetermined objectives that are then used to direct the formulation development process with an emphasis on understanding the pharmaceutical science and manufacturing principles that apply to a product. The design space is directly linked to the use of QbD for formulation development and is a multidimensional combination and interaction of input variables and process parameters that have been demonstrated to provide an assurance of quality. The objective of these studies was to apply the principles of QbD as a framework for the optimisation of a sustained release (SR) formulation of salbutamol sulphate (SBS), and for the establishment of a design space using Response Surface Methodology (RSM) and Artificial Neural Networks (ANN). SBS is a short-acting ♭₂ agonist that is used for the management of asthma and chronic obstructive pulmonary disease (COPD). The use of a SR formulation of SBS may provide clinical benefits in the management of these respiratory disorders. Ashtalin®8 ER (Cipla Ltd., Mumbai, Maharashtra, India) was selected as a reference formulation for use in these studies. An Ishikawa or Cause and Effect diagram was used to determine the impact of formulation and process factors that have the potential to affect product quality. Key areas of concern that must be monitored include the raw materials, the manufacturing equipment and processes, and the analytical and assessment methods employed. The conditions in the laboratory and manufacturing processes were carefully monitored and recorded for any deviation from protocol, and equipment for assessment of dosage form performance, including dissolution equipment, balances and hardness testers, underwent regular maintenance. Preliminary studies to assess the potential utility of Methocel® Kl OOM, alone and in combination with other matrix forming polymers, revealed that the combination of this polymer with xanthan gum and Carbopol® has the potential to modulate the release of SBS at a specific rate, for a period of 12 hr. A central composite design using Methocel® KlOOM, xanthan gum, Carbopol® 974P and Surelease® as the granulating fluid was constructed to fully evaluate the impact of these formulation variables on the rate and extent of SBS release from manufactured formulations. The results revealed that although Methocel® KlOOM and xanthan gum had the greatest retardant effect on drug release, interactions between the polymers used in the study were also important determinants of the measureable responses. An ANN model was trained for optimisation using the data generated from a central composite study. The efficiency of the network was optimised by assessing the impact of the number of nodes in the hidden layer using a three layer Multi Layer Perceptron (MLP). The results revealed that a network with nine nodes in the hidden layer had the best predictive ability, suitable for application to formulation optimisation studies. Pharmaceutical optimisation was conducted using both the RSM and the trained ANN models. The results from the two optimisation procedures yielded two different formulation compositions that were subjected to in vitro dissolution testing using USP Apparatus 3. The results revealed that, although the formulation compositions that were derived from the optimisation procedures were different, both solutions gave reproducible results for which the dissolution profiles were indeed similar to that of the reference formulation. RSM and ANN were further investigated as possible means of establishing a design space for formulation compositions that would result in dosage forms that have similar in vitro release test profiles comparable to the reference product. Constraint plots were used to determine the bounds of the formulation variables that would result in the manufacture of dosage forms with the desired release profile. ANN simulations with hypothetical formulations that were generated within a small region of the experimental domain were investigated as a means of understanding the impact of varying the composition of the formulation on resultant dissolution profiles. Although both methods were suitable for the establishment of a design space, the use of ANN may be better suited for this purpose because of the manner in which ANN handles data. As more information about the behaviour of a formulation and its processes is generated during the product Iifecycle, ANN may be used to evaluate the impact of formulation and process variables on measureable responses. It is recommended that ANN may be suitable for the optimisation of pharmaceutical formulations and establishment of a design space in line with ICH Pharmaceutical Development [1], Quality Risk Management [2] and Pharmaceutical Quality Systems [3]
- Full Text:
- Date Issued: 2010