Remarkable sensitivity for detection of bisphenol A on a gold electrode modified with nickel tetraamino phthalocyanine containing Ni–O–Ni bridges
- Chauke, Vongani, Matemadombo, Fungisai, Nyokong, Tebello
- Authors: Chauke, Vongani , Matemadombo, Fungisai , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261280 , vital:53380 , xlink:href="https://doi.org/10.1016/j.jhazmat.2010.01.061"
- Description: This work reports the electrocatalysis of bisphenol A on Ni(II) tetraamino metallophthalocyanine (NiTAPc) polymer modified gold electrode containing Ni–O–Ni bridges (represented as Ni(OH)TAPc). The Ni(II)TAPc films were electro-transformed in 0.1 mol L−1 NaOH aqueous solution to form ‘O–Ni–O oxo bridges’, forming poly-n-Ni(OH)TAPc (where n is the number of polymerising scans). poly-30-Ni(OH)TAPc, poly-50-Ni(OH)TAPc, poly-70-Ni(OH)TAPc and poly-90-Ni(OH)TAPc films were investigated. The polymeric films were characterised by electrochemical impedance spectroscopy and the charge transfer resistance (RCT) values increased with film thickness. The best catalytic activity for the detection of bisphenol A was on poly-70-Ni(OH)TAPc. Electrode resistance to passivation improved with polymer thickness. The electrocatalytic behaviour of bisphenol A was compared to that of p-nitrophenol in terms of electrode passivation and regeneration. The latter was found to passivate the electrode less than the former. The poly-70-Ni(OH)TAPc modified electrode could reliably detect bisphenol A in a concentration range of 7 × 10−4 to 3 × 10−2 mol L−1 with a limit of detection of 3.68 × 10−9 mol L−1. The sensitivity was 3.26 × 10−4 A mol−1 L cm−2.
- Full Text:
- Date Issued: 2010
- Authors: Chauke, Vongani , Matemadombo, Fungisai , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261280 , vital:53380 , xlink:href="https://doi.org/10.1016/j.jhazmat.2010.01.061"
- Description: This work reports the electrocatalysis of bisphenol A on Ni(II) tetraamino metallophthalocyanine (NiTAPc) polymer modified gold electrode containing Ni–O–Ni bridges (represented as Ni(OH)TAPc). The Ni(II)TAPc films were electro-transformed in 0.1 mol L−1 NaOH aqueous solution to form ‘O–Ni–O oxo bridges’, forming poly-n-Ni(OH)TAPc (where n is the number of polymerising scans). poly-30-Ni(OH)TAPc, poly-50-Ni(OH)TAPc, poly-70-Ni(OH)TAPc and poly-90-Ni(OH)TAPc films were investigated. The polymeric films were characterised by electrochemical impedance spectroscopy and the charge transfer resistance (RCT) values increased with film thickness. The best catalytic activity for the detection of bisphenol A was on poly-70-Ni(OH)TAPc. Electrode resistance to passivation improved with polymer thickness. The electrocatalytic behaviour of bisphenol A was compared to that of p-nitrophenol in terms of electrode passivation and regeneration. The latter was found to passivate the electrode less than the former. The poly-70-Ni(OH)TAPc modified electrode could reliably detect bisphenol A in a concentration range of 7 × 10−4 to 3 × 10−2 mol L−1 with a limit of detection of 3.68 × 10−9 mol L−1. The sensitivity was 3.26 × 10−4 A mol−1 L cm−2.
- Full Text:
- Date Issued: 2010
Synthesis and electrochemical characterisation of new tantalum (V) alkythio phthalocyanines
- Chauke, Vongani, Nyokong, Tebello
- Authors: Chauke, Vongani , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/249093 , vital:51777 , xlink:href="https://doi.org/10.1016/j.ica.2010.05.003"
- Description: The synthesis and electrochemical characterisation of octa-pentylthio (4a) and octa-octylthio (4b) – phthalocyaninato tantalum (III) hydroxide are hereby reported. These TaPc complexes absorb in the near infrared region (∼800 nm in dichloromethane). They show good solubility in most common solvents especially non-viscous solvents such as dichloromethane and chloroform. NMR, mass and infrared spectroscopy and elemental analysis confirmed the structures and purity of the synthesised complexes. The cyclic voltammograms (CVs) showed reversible reduction couples and irreversible oxidation peaks. The latter exhibited adsorption behavior. The reduction processes were observed at −0.74 and −1.13 V (versus Ag|AgCl) for 4a, and −0.67, −1.02 and −1.48 V (versus Ag|AgCl) for 4b. Spectroelectrochemistry confirmed one metal reduction, with the rest of the redox processes being centered on the phthalocyanine ring.
- Full Text:
- Date Issued: 2010
- Authors: Chauke, Vongani , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/249093 , vital:51777 , xlink:href="https://doi.org/10.1016/j.ica.2010.05.003"
- Description: The synthesis and electrochemical characterisation of octa-pentylthio (4a) and octa-octylthio (4b) – phthalocyaninato tantalum (III) hydroxide are hereby reported. These TaPc complexes absorb in the near infrared region (∼800 nm in dichloromethane). They show good solubility in most common solvents especially non-viscous solvents such as dichloromethane and chloroform. NMR, mass and infrared spectroscopy and elemental analysis confirmed the structures and purity of the synthesised complexes. The cyclic voltammograms (CVs) showed reversible reduction couples and irreversible oxidation peaks. The latter exhibited adsorption behavior. The reduction processes were observed at −0.74 and −1.13 V (versus Ag|AgCl) for 4a, and −0.67, −1.02 and −1.48 V (versus Ag|AgCl) for 4b. Spectroelectrochemistry confirmed one metal reduction, with the rest of the redox processes being centered on the phthalocyanine ring.
- Full Text:
- Date Issued: 2010
- «
- ‹
- 1
- ›
- »