Understanding human‐wildlife conflict: a geographic study of the Pringle Bay chacma baboon troop
- Authors: Parsons, Wendy Jennifer
- Date: 2021-10-29
- Subjects: Chacma baboon South Africa Pringle Bay , Human-animal relationships South Africa Pringle Bay , Radio collars , Geographic information systems , Chacma baboon South Africa Pringle Bay Geographical distribution , Chacma baboon Behavior South Africa Pringle Bay , Chacma baboon Effect of human beings on South Africa Pringle Bay , Geospatial data , User-generated content
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/294828 , vital:57259
- Description: A better appreciation of the physical geography and environmental factors that play a role in the movement of the Chacma baboon troop in and around Pringle Bay (Overberg Municipality) and part of the Kogelberg Biosphere could lead to a better understanding of their movement. In turn, this insight may contribute to reducing the human‐wildlife conflict that has arisen in the town. Humanwildlife conflict escalated after the rapid urban development that followed the introduction of electricity in 1993. The baboon‐human conflict in Pringle Bay is, in part, due to habitat loss caused by urban development and the easy availability of food in the urban area. The wild animal’s natural behaviour (seeking food and fresh water) and the human way of living (food and waste management) has led to baboon habituation and increased raiding in the village. The objective of this geographic study was to understand the baboon troops spatial and temporal movements. Two methods are being used to track the baboon troop. The first method entails collection of data from GPS tracking collars which record the location of the baboons at 30 minute intervals. This is considered a reliable, but invasive and expensive method where the alpha male and female baboon had to be captured and fitted with tracking collars. The second method entails using volunteered geographic data, in this case, information from a WhatsApp baboon alert group. While this provided data at no real cost, the mining of the information was challenging and building a geodatabase was time consuming. However, this citizen science approach added valuable data and was able to identify human‐wildlife conflict sites in the urban area. The baboon location data was mapped using GIS. Primary and secondary spatial data was sourced and added to the geodatabase created in ArcMap 10.7. Various ArcMap tools were used in analysing the environmental factors (climate, vegetation, water sources and topography) together with the location data. Analysis of this data allowed the range of the baboons to be mapped, showing the maximum extent of the territory the baboons move in. The was refined by mapping their home range (defined as the area in which they spend 95% of the time) and their core area (in which they spend 50% of the time). High activity areas ‐ or hotspots ‐ were identified, as were the baboon sleep sites. The data allowed for habitat use and seasonal patterns of movement to be explored. A key finding of the research was that the baboons were observed outside of the urban area for 82% of the time. The baboons spent the majority of their time in mountain fynbos vegetation. Hotspot areas showing significant baboon activity were identified within the town and close correlation with their sleep sites and wetland areas was evident. No definitive seasonal or weather patterns were found that influence the baboon distribution. Baboon management is complex and difficult. The sustainability of the baboon troop is important for the biodiversity of the Kogelberg Biosphere Reserve. While the baboons should not be encouraged to enter the urban area, the residents should play a role in reducing the availability of food and baboonproofing their properties. The Overstrand Municipality also needs to address waste management and waste collection in the town. Understanding the biogeography of the baboons and implementing the above‐mentioned mitigating management measures would encourage human‐wildlife coexistence and inform future baboon management plans. , Thesis (MSc) -- Faculty of Science, Geography, 2021
- Full Text:
- Authors: Parsons, Wendy Jennifer
- Date: 2021-10-29
- Subjects: Chacma baboon South Africa Pringle Bay , Human-animal relationships South Africa Pringle Bay , Radio collars , Geographic information systems , Chacma baboon South Africa Pringle Bay Geographical distribution , Chacma baboon Behavior South Africa Pringle Bay , Chacma baboon Effect of human beings on South Africa Pringle Bay , Geospatial data , User-generated content
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/294828 , vital:57259
- Description: A better appreciation of the physical geography and environmental factors that play a role in the movement of the Chacma baboon troop in and around Pringle Bay (Overberg Municipality) and part of the Kogelberg Biosphere could lead to a better understanding of their movement. In turn, this insight may contribute to reducing the human‐wildlife conflict that has arisen in the town. Humanwildlife conflict escalated after the rapid urban development that followed the introduction of electricity in 1993. The baboon‐human conflict in Pringle Bay is, in part, due to habitat loss caused by urban development and the easy availability of food in the urban area. The wild animal’s natural behaviour (seeking food and fresh water) and the human way of living (food and waste management) has led to baboon habituation and increased raiding in the village. The objective of this geographic study was to understand the baboon troops spatial and temporal movements. Two methods are being used to track the baboon troop. The first method entails collection of data from GPS tracking collars which record the location of the baboons at 30 minute intervals. This is considered a reliable, but invasive and expensive method where the alpha male and female baboon had to be captured and fitted with tracking collars. The second method entails using volunteered geographic data, in this case, information from a WhatsApp baboon alert group. While this provided data at no real cost, the mining of the information was challenging and building a geodatabase was time consuming. However, this citizen science approach added valuable data and was able to identify human‐wildlife conflict sites in the urban area. The baboon location data was mapped using GIS. Primary and secondary spatial data was sourced and added to the geodatabase created in ArcMap 10.7. Various ArcMap tools were used in analysing the environmental factors (climate, vegetation, water sources and topography) together with the location data. Analysis of this data allowed the range of the baboons to be mapped, showing the maximum extent of the territory the baboons move in. The was refined by mapping their home range (defined as the area in which they spend 95% of the time) and their core area (in which they spend 50% of the time). High activity areas ‐ or hotspots ‐ were identified, as were the baboon sleep sites. The data allowed for habitat use and seasonal patterns of movement to be explored. A key finding of the research was that the baboons were observed outside of the urban area for 82% of the time. The baboons spent the majority of their time in mountain fynbos vegetation. Hotspot areas showing significant baboon activity were identified within the town and close correlation with their sleep sites and wetland areas was evident. No definitive seasonal or weather patterns were found that influence the baboon distribution. Baboon management is complex and difficult. The sustainability of the baboon troop is important for the biodiversity of the Kogelberg Biosphere Reserve. While the baboons should not be encouraged to enter the urban area, the residents should play a role in reducing the availability of food and baboonproofing their properties. The Overstrand Municipality also needs to address waste management and waste collection in the town. Understanding the biogeography of the baboons and implementing the above‐mentioned mitigating management measures would encourage human‐wildlife coexistence and inform future baboon management plans. , Thesis (MSc) -- Faculty of Science, Geography, 2021
- Full Text:
Properties of traveling ionospheric disturbances (TIDs) over the Western Cape, South Africa
- Authors: Tyalimpi, Vumile Mike
- Date: 2015
- Subjects: Doppler radar , Geographic information systems , Traveling ionospheric disturbances -- south Africa , Ionospheric disturbances -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5557 , http://hdl.handle.net/10962/d1017901
- Description: Travelling Ionospheric Disturbances (TIDs) are said to be produced by atmospheric gravitational waves propagating through the neutral ionosphere. These are smaller in amplitude and period when compared to most ionospheric disturbances and hence more difficult to measure. Very little is known about the properties of the travelling ionospheric disturbances (TIDs) over the Southern Hemisphere regions since studies have been conducted mostly over the Northern Hemisphere regions. This study presents a framework, using a High Frequency (HF) Doppler radar to investigate the physical properties and the possible driving mechanisms of TIDs. This research focuses on studying the characteristics of the TIDs, such as period, velocity and temporal variations, using HF Doppler measurements taken in South Africa. By making use of a Wavelet Analysis technique, the TIDs’ characteristics were determined. A statistical summary on speed and direction of propagation of the observed TIDs was performed. The winter medium scale travelling ionospheric disturbances (MSTIDs) observed are generally faster than the summer MSTIDs. For all seasons, the MSTIDs had a preferred south-southwest direction of propagation. Most of the large scale travelling ionospheric disturbances (LSTIDs) were observed during the night and of these, the spring LSTIDs were fastest when compared to autumn and summer LSTIDs. The general direction of travel of the observed LSTIDs is south-southeast. Total Electron Content (TEC), derived from Global Positioning System (GPS) measurements, were used to validate some of the TID results obtained from the HF Doppler data. The Horizontal Wind Model (HWM07), magnetic K index, and solar terminators were used to determine the possible sources of the observed TIDs. Only 41% of the observed TIDs were successfully linked to their possible sources of excitation. The information gathered from this study will be valuable in future radio communications and will serve as means to improve the existing ionospheric models over the South African region.
- Full Text:
- Authors: Tyalimpi, Vumile Mike
- Date: 2015
- Subjects: Doppler radar , Geographic information systems , Traveling ionospheric disturbances -- south Africa , Ionospheric disturbances -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5557 , http://hdl.handle.net/10962/d1017901
- Description: Travelling Ionospheric Disturbances (TIDs) are said to be produced by atmospheric gravitational waves propagating through the neutral ionosphere. These are smaller in amplitude and period when compared to most ionospheric disturbances and hence more difficult to measure. Very little is known about the properties of the travelling ionospheric disturbances (TIDs) over the Southern Hemisphere regions since studies have been conducted mostly over the Northern Hemisphere regions. This study presents a framework, using a High Frequency (HF) Doppler radar to investigate the physical properties and the possible driving mechanisms of TIDs. This research focuses on studying the characteristics of the TIDs, such as period, velocity and temporal variations, using HF Doppler measurements taken in South Africa. By making use of a Wavelet Analysis technique, the TIDs’ characteristics were determined. A statistical summary on speed and direction of propagation of the observed TIDs was performed. The winter medium scale travelling ionospheric disturbances (MSTIDs) observed are generally faster than the summer MSTIDs. For all seasons, the MSTIDs had a preferred south-southwest direction of propagation. Most of the large scale travelling ionospheric disturbances (LSTIDs) were observed during the night and of these, the spring LSTIDs were fastest when compared to autumn and summer LSTIDs. The general direction of travel of the observed LSTIDs is south-southeast. Total Electron Content (TEC), derived from Global Positioning System (GPS) measurements, were used to validate some of the TID results obtained from the HF Doppler data. The Horizontal Wind Model (HWM07), magnetic K index, and solar terminators were used to determine the possible sources of the observed TIDs. Only 41% of the observed TIDs were successfully linked to their possible sources of excitation. The information gathered from this study will be valuable in future radio communications and will serve as means to improve the existing ionospheric models over the South African region.
- Full Text:
The use of Landsat ETM imagery as a suitable data capture source for alien acacia species for the WFW programme
- Authors: Cobbing, Benedict Louis
- Date: 2007
- Subjects: Geographic information systems , Global Positioning System , Landsat satellites , Agriculture -- Remote sensing , Geography -- Remote sensing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4856 , http://hdl.handle.net/10962/d1005532 , Geographic information systems , Global Positioning System , Landsat satellites , Agriculture -- Remote sensing , Geography -- Remote sensing
- Description: Geographic Information System technology today allows for the rapid analysis of vast amounts of spatial and non-spatial data. The power of a GIS can only be effected with the rapid collection of accurate input data. This is particularly true in the case of the South African National Working for Water (WFW) Programme where large volumes of spatial data on alien vegetation infestations are captured throughout the country. Alien vegetation clearing contracts cannot be generated, for WFW, without this data, so that the accurate capture of such data is crucial to the success of the programme. Mapping Invasive Alien Plant (IAP) data within WFW is a perennial problem (Coetzee, pers com, 2002), because not enough mapping is being done to meet the annual requirements of the programme in the various provinces. This is re-iterated by Richardson, 2004, who states that there is a shortage of accurate data on IAP abundance in South Africa. Therefore there is a need to investigate alternate methods of data capture; such as remote sensing, whilst working within the existing WFW data capture standards. The aim of this research was to investigate the use of Landsat ETM imagery as a data capture source for mapping alien vegetation for the WFW Programme in terms of their approved mapping methods, for both automated and manual classification techniques. The automated and manual classification results were compared to control data captured by differential Global Positioning Systems (DGPS). The research tested the various methods of data capture using Landsat ETM images over a range of study sites of varying complexity: a simple grassland area, a medium complexity grassy fynbos site and a complicated indigenous forest site. An important component of the research was to develop a mapping (classification) Ranking System based upon variables identified by WFW as fundamental in data capture decision making: spatial and positional accuracy, time constraints and cost constraints for three typical alien invaded areas. The mapping Ranking System compared the results of the various mapping methods for each factor for the study sites against each other. This provided an indication of which mapping method is the most efficient or suitable for a particular area.
- Full Text:
- Authors: Cobbing, Benedict Louis
- Date: 2007
- Subjects: Geographic information systems , Global Positioning System , Landsat satellites , Agriculture -- Remote sensing , Geography -- Remote sensing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4856 , http://hdl.handle.net/10962/d1005532 , Geographic information systems , Global Positioning System , Landsat satellites , Agriculture -- Remote sensing , Geography -- Remote sensing
- Description: Geographic Information System technology today allows for the rapid analysis of vast amounts of spatial and non-spatial data. The power of a GIS can only be effected with the rapid collection of accurate input data. This is particularly true in the case of the South African National Working for Water (WFW) Programme where large volumes of spatial data on alien vegetation infestations are captured throughout the country. Alien vegetation clearing contracts cannot be generated, for WFW, without this data, so that the accurate capture of such data is crucial to the success of the programme. Mapping Invasive Alien Plant (IAP) data within WFW is a perennial problem (Coetzee, pers com, 2002), because not enough mapping is being done to meet the annual requirements of the programme in the various provinces. This is re-iterated by Richardson, 2004, who states that there is a shortage of accurate data on IAP abundance in South Africa. Therefore there is a need to investigate alternate methods of data capture; such as remote sensing, whilst working within the existing WFW data capture standards. The aim of this research was to investigate the use of Landsat ETM imagery as a data capture source for mapping alien vegetation for the WFW Programme in terms of their approved mapping methods, for both automated and manual classification techniques. The automated and manual classification results were compared to control data captured by differential Global Positioning Systems (DGPS). The research tested the various methods of data capture using Landsat ETM images over a range of study sites of varying complexity: a simple grassland area, a medium complexity grassy fynbos site and a complicated indigenous forest site. An important component of the research was to develop a mapping (classification) Ranking System based upon variables identified by WFW as fundamental in data capture decision making: spatial and positional accuracy, time constraints and cost constraints for three typical alien invaded areas. The mapping Ranking System compared the results of the various mapping methods for each factor for the study sites against each other. This provided an indication of which mapping method is the most efficient or suitable for a particular area.
- Full Text:
GIS in participatory catchment management : a case study in the Kat River Valley, Eastern Cape, South Africa
- Authors: McMaster, Alistair
- Date: 2002 , 2013-05-16
- Subjects: Watershed management -- South Africa -- Eastern Cape , Geographic information systems
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4868 , http://hdl.handle.net/10962/d1007602 , Watershed management -- South Africa -- Eastern Cape , Geographic information systems
- Description: In water resources management in South Africa, there is an emphasis on public participation. On a river catchment basis, one of the mechanisms for such participation is the establishment of catchment forums. However, members of catchment forums, particularly those coming from poor or rural communities, cannot be expected to engage in catchment management without having been enabled to do so. This thesis considers the use of GIS in the process of enabling the Kat River Valley Catchment Forum to better participate in catchment management. The research focus is on the use of GIS to facilitate an understanding of the Kat River Catchment and associated catchment concepts, and constructive communication and sharing, among the Catchment Forum. The GIS is used in the context of "GIS for Participatory Research", an outgrowth of Public Participation GIS (PPGIS), which focuses on GIS as a tool for empowerment within participatory processes. The study has used Action Research, situated in the Critical paradigm, as a methodology. The research has included seven Forum workshop processes and one series of in-village meetings. These engagements have involved map-based appraisals, issues and resource mapping, map-based planning, and the use of on-screen GIS for presentation and sharing. The use of GIS has facilitated the creation of customised maps, the integration of village-scale mapping into a catchment scale product, the presentation of synthesised data in digital and hardcopy format and, in so doing, has allowed catchment-scale appraisal. Outcomes enabling participation in catchment management have included developed mapping skills and an enhanced understanding of the catchment as a whole, and developed conceptual access to a decision-making language (or way of thinking), among participants. Furthermore, the Forum as a whole has identified common needs, and has developed a set of map-based action plans. The research process has yielded a number of lessons regarding "GIS for participation" and the participatory framework within which it takes place. Chief among these is that the GIS operator should take on the role of a participatory practitioner.
- Full Text:
- Authors: McMaster, Alistair
- Date: 2002 , 2013-05-16
- Subjects: Watershed management -- South Africa -- Eastern Cape , Geographic information systems
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4868 , http://hdl.handle.net/10962/d1007602 , Watershed management -- South Africa -- Eastern Cape , Geographic information systems
- Description: In water resources management in South Africa, there is an emphasis on public participation. On a river catchment basis, one of the mechanisms for such participation is the establishment of catchment forums. However, members of catchment forums, particularly those coming from poor or rural communities, cannot be expected to engage in catchment management without having been enabled to do so. This thesis considers the use of GIS in the process of enabling the Kat River Valley Catchment Forum to better participate in catchment management. The research focus is on the use of GIS to facilitate an understanding of the Kat River Catchment and associated catchment concepts, and constructive communication and sharing, among the Catchment Forum. The GIS is used in the context of "GIS for Participatory Research", an outgrowth of Public Participation GIS (PPGIS), which focuses on GIS as a tool for empowerment within participatory processes. The study has used Action Research, situated in the Critical paradigm, as a methodology. The research has included seven Forum workshop processes and one series of in-village meetings. These engagements have involved map-based appraisals, issues and resource mapping, map-based planning, and the use of on-screen GIS for presentation and sharing. The use of GIS has facilitated the creation of customised maps, the integration of village-scale mapping into a catchment scale product, the presentation of synthesised data in digital and hardcopy format and, in so doing, has allowed catchment-scale appraisal. Outcomes enabling participation in catchment management have included developed mapping skills and an enhanced understanding of the catchment as a whole, and developed conceptual access to a decision-making language (or way of thinking), among participants. Furthermore, the Forum as a whole has identified common needs, and has developed a set of map-based action plans. The research process has yielded a number of lessons regarding "GIS for participation" and the participatory framework within which it takes place. Chief among these is that the GIS operator should take on the role of a participatory practitioner.
- Full Text:
RADGIS - an improved architecture for runtime-extensible, distributed GIS applications
- Authors: Preston, Richard Michael
- Date: 2002
- Subjects: Geographic information systems
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4626 , http://hdl.handle.net/10962/d1006497
- Description: A number of GIS architectures and technologies have emerged recently to facilitate the visualisation and processing of geospatial data over the Web. The work presented in this dissertation builds on these efforts and undertakes to overcome some of the major problems with traditional GIS client architectures, including application bloat, lack of customisability, and lack of interoperability between GIS products. In this dissertation we describe how a new client-side GIS architecture was developed and implemented as a proof-of-concept application called RADGIS, which is based on open standards and emerging distributed component-based software paradigms. RADGIS reflects the current trend in development focus from Web browser-based applications to customised clients, based on open standards, that make use of distributed Web services. While much attention has been paid to exposing data on the Web, there is growing momentum towards providing “value-added” services. A good example of this is the tremendous industry interest in the provision of location-based services, which has been discussed as a special use-case of our RADGIS architecture. Thus, in the near future client applications will not simply be used to access data transparently, but will also become facilitators for the location-transparent invocation of local and remote services. This flexible architecture will ensure that data can be stored and processed independently of the location of the client that wishes to view or interact with it. Our RADGIS application enables content developers and end-users to create and/or customise GIS applications dynamically at runtime through the incorporation of GIS services. This ensures that the client application has the flexibility to withstand changing levels of expertise or user requirements. These GIS services are implemented as components that execute locally on the client machine, or as remote CORBA Objects or EJBs. Assembly and deployment of these components is achieved using a specialised XML descriptor. This XML descriptor is written using a markup language that we developed specifically for this purpose, called DGCML, which contains deployment information, as well as a GUI specification and links to an XML-based help system that can be merged with the RADGIS client application’s existing help system. Thus, no additional requirements are imposed on object developers by the RADGIS architecture, i.e. there is no need to rewrite existing objects since DGCML acts as a runtime-customisable wrapper, allowing existing objects to be utilised by RADGIS. While the focus of this thesis has been on overcoming the above-mentioned problems with traditional GIS applications, the work described here can also be applied in a much broader context, especially in the development of highly customisable client applications that are able to integrate Web services at runtime.
- Full Text:
- Authors: Preston, Richard Michael
- Date: 2002
- Subjects: Geographic information systems
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4626 , http://hdl.handle.net/10962/d1006497
- Description: A number of GIS architectures and technologies have emerged recently to facilitate the visualisation and processing of geospatial data over the Web. The work presented in this dissertation builds on these efforts and undertakes to overcome some of the major problems with traditional GIS client architectures, including application bloat, lack of customisability, and lack of interoperability between GIS products. In this dissertation we describe how a new client-side GIS architecture was developed and implemented as a proof-of-concept application called RADGIS, which is based on open standards and emerging distributed component-based software paradigms. RADGIS reflects the current trend in development focus from Web browser-based applications to customised clients, based on open standards, that make use of distributed Web services. While much attention has been paid to exposing data on the Web, there is growing momentum towards providing “value-added” services. A good example of this is the tremendous industry interest in the provision of location-based services, which has been discussed as a special use-case of our RADGIS architecture. Thus, in the near future client applications will not simply be used to access data transparently, but will also become facilitators for the location-transparent invocation of local and remote services. This flexible architecture will ensure that data can be stored and processed independently of the location of the client that wishes to view or interact with it. Our RADGIS application enables content developers and end-users to create and/or customise GIS applications dynamically at runtime through the incorporation of GIS services. This ensures that the client application has the flexibility to withstand changing levels of expertise or user requirements. These GIS services are implemented as components that execute locally on the client machine, or as remote CORBA Objects or EJBs. Assembly and deployment of these components is achieved using a specialised XML descriptor. This XML descriptor is written using a markup language that we developed specifically for this purpose, called DGCML, which contains deployment information, as well as a GUI specification and links to an XML-based help system that can be merged with the RADGIS client application’s existing help system. Thus, no additional requirements are imposed on object developers by the RADGIS architecture, i.e. there is no need to rewrite existing objects since DGCML acts as a runtime-customisable wrapper, allowing existing objects to be utilised by RADGIS. While the focus of this thesis has been on overcoming the above-mentioned problems with traditional GIS applications, the work described here can also be applied in a much broader context, especially in the development of highly customisable client applications that are able to integrate Web services at runtime.
- Full Text:
An appraisal of the production and utility of digital atlases in Africa: a case study of Swaziland
- Authors: Pettit, Louise Manda
- Date: 2000
- Subjects: Swaziland Atlases , Digital mapping , Geographic information systems , Cartography -- Data processing , Cartography -- Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4816 , http://hdl.handle.net/10962/d1005490 , Swaziland Atlases , Digital mapping , Geographic information systems , Cartography -- Data processing , Cartography -- Africa
- Description: This research will appraise the production and utility of digital atlases in an African context, using personal experience gained through the production of a digital atlas for Swaziland, the opinions obtained from other producers of African digital atlases and relevant literature. Since the 1950s, decision makers and researchers have viewed information as a powerful contributor to national development. Over the past thirty years, developed countries have increased the efficient collation and dissemination of geographic information through the utilization of the digital environment. The development of Geographic Information Systems (GIS) has increased the range of applications attainable in digital mapping projects. Applications have ranged from resource inventories to the monitoring of environmental degradation, crime patterns and service provision. The patchy history of data collection, analysis and mapping in Africa, has had a limiting effect on the ability of countries to identify, plan and control their resources efficiently. Despite the desire to automate the mapping process and reap some of the planning benefits evident in the developed world, Africa has not succeeded in mobilising full technological potential. Political instability, poor infrastructure, the absence of national policy guidelines, and a lack of skilled manpower are some of the issues which have limited utilization. Despite many of the hurdles faced by African countries, automated mapping and analysis technologies are still being pursued. The role of computers in the utilisation of data has become apparent through several means, one of which is the digital atlas. Analytical functions in many of these products allow situation modelling and provide superior graphic displays in comparison to their paper counterparts. Several African countries have embarked on the development of national digital databases and in some cases have produced digital national atlases. The potential to improve resource utilization, service provision and land use planning using these atlases, does exist. The production and utility of these atlases in an African context, however, needs closer assessment. "Computers don't clothe, don't cure, don't feed. Their power begins and ends with information. Their usefulness is therefore strictly linked to the ffectiveness of the information" (Gardner,1993:16).
- Full Text:
- Authors: Pettit, Louise Manda
- Date: 2000
- Subjects: Swaziland Atlases , Digital mapping , Geographic information systems , Cartography -- Data processing , Cartography -- Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4816 , http://hdl.handle.net/10962/d1005490 , Swaziland Atlases , Digital mapping , Geographic information systems , Cartography -- Data processing , Cartography -- Africa
- Description: This research will appraise the production and utility of digital atlases in an African context, using personal experience gained through the production of a digital atlas for Swaziland, the opinions obtained from other producers of African digital atlases and relevant literature. Since the 1950s, decision makers and researchers have viewed information as a powerful contributor to national development. Over the past thirty years, developed countries have increased the efficient collation and dissemination of geographic information through the utilization of the digital environment. The development of Geographic Information Systems (GIS) has increased the range of applications attainable in digital mapping projects. Applications have ranged from resource inventories to the monitoring of environmental degradation, crime patterns and service provision. The patchy history of data collection, analysis and mapping in Africa, has had a limiting effect on the ability of countries to identify, plan and control their resources efficiently. Despite the desire to automate the mapping process and reap some of the planning benefits evident in the developed world, Africa has not succeeded in mobilising full technological potential. Political instability, poor infrastructure, the absence of national policy guidelines, and a lack of skilled manpower are some of the issues which have limited utilization. Despite many of the hurdles faced by African countries, automated mapping and analysis technologies are still being pursued. The role of computers in the utilisation of data has become apparent through several means, one of which is the digital atlas. Analytical functions in many of these products allow situation modelling and provide superior graphic displays in comparison to their paper counterparts. Several African countries have embarked on the development of national digital databases and in some cases have produced digital national atlases. The potential to improve resource utilization, service provision and land use planning using these atlases, does exist. The production and utility of these atlases in an African context, however, needs closer assessment. "Computers don't clothe, don't cure, don't feed. Their power begins and ends with information. Their usefulness is therefore strictly linked to the ffectiveness of the information" (Gardner,1993:16).
- Full Text:
The development of a geographic information systems based atlas of southern African freshwater fish, and its application to biogeographic analysis
- Scott, Lucy Elizabeth Powell
- Authors: Scott, Lucy Elizabeth Powell
- Date: 2000
- Subjects: Freshwater fishes -- Africa, Southern , Freshwater fishes -- Geographical distribution -- Atlases , Freshwater fishes -- Africa, Southern -- Geographical distribution -- Atlases , Geographic information systems
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5256 , http://hdl.handle.net/10962/d1005099 , Freshwater fishes -- Africa, Southern , Freshwater fishes -- Geographical distribution -- Atlases , Freshwater fishes -- Africa, Southern -- Geographical distribution -- Atlases , Geographic information systems
- Description: A Geographic Information Systems (GIS) atlas of southern African freshwater fish was developed for the SADC countries from natural history collection specimens, hydrological, topographical and climatological data. The primary purpose of the development of the atlas of freshwater fish was the construction of a practical framework to transform vast amounts of existing biological data for use in research and management of aquatic resources. The database of freshwater fish collection specimens that was incorporated into the atlas, was developed in association with ALCOM (Aquatic Resources Management for Local Community Development Programme). The development of advanced computing and GIS technology has increased the scope of biological atlas projects by facilitating the integration of large amounts of spatial data to produce derived databases for specific applications. The atlas of freshwater fish was constructed using TNTmips GIS software as the most practical system available for managing and analysing biological data with a spatial component. The atlas contains 35 180 comprehensive distribution records of 735 species of fish. It has many applications as an inventory of ichthyofaunal spatial biodiversity, including those of conservation planning, environmental assessment and biogeographic research. Biogeographic studies have traditionally been subjective due to the logistical problems of working with large amounts of distribution data, although some small-scale quantitative research has been carried out in the past. The content of the atlas of freshwater fish is tested with respect to these previous studies, on known patterns of freshwater fish distributions, and the analytical capability of the atlas is tested and demonstrated with some new preliminary approaches to the analysis of freshwater fish distributions in southern Africa.
- Full Text:
- Authors: Scott, Lucy Elizabeth Powell
- Date: 2000
- Subjects: Freshwater fishes -- Africa, Southern , Freshwater fishes -- Geographical distribution -- Atlases , Freshwater fishes -- Africa, Southern -- Geographical distribution -- Atlases , Geographic information systems
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5256 , http://hdl.handle.net/10962/d1005099 , Freshwater fishes -- Africa, Southern , Freshwater fishes -- Geographical distribution -- Atlases , Freshwater fishes -- Africa, Southern -- Geographical distribution -- Atlases , Geographic information systems
- Description: A Geographic Information Systems (GIS) atlas of southern African freshwater fish was developed for the SADC countries from natural history collection specimens, hydrological, topographical and climatological data. The primary purpose of the development of the atlas of freshwater fish was the construction of a practical framework to transform vast amounts of existing biological data for use in research and management of aquatic resources. The database of freshwater fish collection specimens that was incorporated into the atlas, was developed in association with ALCOM (Aquatic Resources Management for Local Community Development Programme). The development of advanced computing and GIS technology has increased the scope of biological atlas projects by facilitating the integration of large amounts of spatial data to produce derived databases for specific applications. The atlas of freshwater fish was constructed using TNTmips GIS software as the most practical system available for managing and analysing biological data with a spatial component. The atlas contains 35 180 comprehensive distribution records of 735 species of fish. It has many applications as an inventory of ichthyofaunal spatial biodiversity, including those of conservation planning, environmental assessment and biogeographic research. Biogeographic studies have traditionally been subjective due to the logistical problems of working with large amounts of distribution data, although some small-scale quantitative research has been carried out in the past. The content of the atlas of freshwater fish is tested with respect to these previous studies, on known patterns of freshwater fish distributions, and the analytical capability of the atlas is tested and demonstrated with some new preliminary approaches to the analysis of freshwater fish distributions in southern Africa.
- Full Text:
A collated digital, geological map database for the central Namaqua Province using geographical information system technology
- Authors: Holland, Henry
- Date: 1997
- Subjects: Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4936 , http://hdl.handle.net/10962/d1005548 , Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Description: The genlogy of the Namaqua Province is notoriously difficult to map and interpret due to polymetamorphic and multiple deformation events and limlted outcrop. Current maps of the Province reflect diverse interpretations of stratigraphy as a consequence of these difficulties. A Geographic Information System is essentially a digital database and a set of functions and procedures to capture, analyse and manipulate spatially related data. A GIS is therefore ideally suited to the study and analysis of maps. A digital map database was established, using modem GIS technology, to facilitate the collation of existing maps of an area in the Central Namaqua Province (CNP). This database is based on a lithological classification system similar to that used by Harris (1992), rather than on an interpretive stratigraphic model. In order to establish the database, existing geological maps were scanned into a GIS, and lines of outcrop and lithological contacts were digitised using a manual line following process, which is one of the functions native to a GIS. Attribute data were then attached to the resultant polygons. The attribute database consists of lithological, textural and mineralogical data, as well as stratigraphical classification data according to the South African Committee for Stratigraphy (SACS), correlative names assigned to units by the Precambrian Research Unit, the Geological Survey of South Africa, the Bushmanland Research group and the University of the Orange Free State. Other attribute data included in the database, are tectonic and absolute age information, and the terrane classification for the area. This database reflects the main objective of the project and also serves as a basis for further expansion of a geological GIS for the CNP. Cartographic and database capabilities of the GIS were employed to produce a collated lithological map of the CNP. A TNTmipsTM Spatial Manipulation Language routine was written to produce a database containing two fields linked to each polygon, one for lithology and one for a correlation probability factor. Correlation factors are calculated in this routine from three variables, namely the prominence a worker attached to a specific lithology within a unit or outcrop, the agreement amongst the various workers on the actual lithology present within an outcrop, and the correspondence between the source of the spatial element (mapped outcrop) and the source of the attribute data attached to it. Outcrops were displayed on the map according to the lithology with the highest correlation factor, providing a unique view of the spatial relationships and distribution patterns of lithological units in the CNP. A second map was produced indicating the correlation factors for lithologies within the CNP. Thematic maps are produced in a GIS by selecting spatial elements according to a set of criteria, usually based on the attribute database, and then displaying the elements as maps. Maps created by this process are known as customised maps, since users of the GIS can customise the selection and display of elements according to their needs. For instance, all outcrops of rock units containing particular lithologies of a given age occurring in a specific terrane can be displayed - either on screen or printed out as a map. The database also makes it possible to plot maps according to different stratigraphic classification systems. Areas where various workers disagree on the stratigraphic classification of units can be isolated, and displayed as separate maps in order to aid in the collation process. The database can assist SACS in identifying areas in the CNP where stratigraphic classification is still lacking or agreements on stratigraphic nomenclature have not yet been attained. More than one database can be attached to the spatial elements in a GIS, and the Namaqua-GIS can therefore be expanded to include geochemical, geophysical, economic, structural and geographical data. Other data on the area, such as more detailed maps, photographs and satellite images can be attached to the lithological map database in the correct spatial relationship. Another advantage of a GIS is the facility to continually update the database(s) as more information becomes available and/or as interpretation of the area is refined.
- Full Text:
- Authors: Holland, Henry
- Date: 1997
- Subjects: Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4936 , http://hdl.handle.net/10962/d1005548 , Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Description: The genlogy of the Namaqua Province is notoriously difficult to map and interpret due to polymetamorphic and multiple deformation events and limlted outcrop. Current maps of the Province reflect diverse interpretations of stratigraphy as a consequence of these difficulties. A Geographic Information System is essentially a digital database and a set of functions and procedures to capture, analyse and manipulate spatially related data. A GIS is therefore ideally suited to the study and analysis of maps. A digital map database was established, using modem GIS technology, to facilitate the collation of existing maps of an area in the Central Namaqua Province (CNP). This database is based on a lithological classification system similar to that used by Harris (1992), rather than on an interpretive stratigraphic model. In order to establish the database, existing geological maps were scanned into a GIS, and lines of outcrop and lithological contacts were digitised using a manual line following process, which is one of the functions native to a GIS. Attribute data were then attached to the resultant polygons. The attribute database consists of lithological, textural and mineralogical data, as well as stratigraphical classification data according to the South African Committee for Stratigraphy (SACS), correlative names assigned to units by the Precambrian Research Unit, the Geological Survey of South Africa, the Bushmanland Research group and the University of the Orange Free State. Other attribute data included in the database, are tectonic and absolute age information, and the terrane classification for the area. This database reflects the main objective of the project and also serves as a basis for further expansion of a geological GIS for the CNP. Cartographic and database capabilities of the GIS were employed to produce a collated lithological map of the CNP. A TNTmipsTM Spatial Manipulation Language routine was written to produce a database containing two fields linked to each polygon, one for lithology and one for a correlation probability factor. Correlation factors are calculated in this routine from three variables, namely the prominence a worker attached to a specific lithology within a unit or outcrop, the agreement amongst the various workers on the actual lithology present within an outcrop, and the correspondence between the source of the spatial element (mapped outcrop) and the source of the attribute data attached to it. Outcrops were displayed on the map according to the lithology with the highest correlation factor, providing a unique view of the spatial relationships and distribution patterns of lithological units in the CNP. A second map was produced indicating the correlation factors for lithologies within the CNP. Thematic maps are produced in a GIS by selecting spatial elements according to a set of criteria, usually based on the attribute database, and then displaying the elements as maps. Maps created by this process are known as customised maps, since users of the GIS can customise the selection and display of elements according to their needs. For instance, all outcrops of rock units containing particular lithologies of a given age occurring in a specific terrane can be displayed - either on screen or printed out as a map. The database also makes it possible to plot maps according to different stratigraphic classification systems. Areas where various workers disagree on the stratigraphic classification of units can be isolated, and displayed as separate maps in order to aid in the collation process. The database can assist SACS in identifying areas in the CNP where stratigraphic classification is still lacking or agreements on stratigraphic nomenclature have not yet been attained. More than one database can be attached to the spatial elements in a GIS, and the Namaqua-GIS can therefore be expanded to include geochemical, geophysical, economic, structural and geographical data. Other data on the area, such as more detailed maps, photographs and satellite images can be attached to the lithological map database in the correct spatial relationship. Another advantage of a GIS is the facility to continually update the database(s) as more information becomes available and/or as interpretation of the area is refined.
- Full Text:
The application of a landscape diversity index using remote sensing and geographical information systems to identify degradation patterns in the Great Fish River Valley, Eastern Cape Province, South Africa
- Authors: Tanser, Frank Courteney
- Date: 1997
- Subjects: Geographic information systems , Earth sciences -- Remote sensing , Environmental degradation -- South Africa -- Eastern Cape -- Great Fish River Valley , Forest degradation -- South Africa -- Eastern Cape -- Great Rish River Valley
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4814 , http://hdl.handle.net/10962/d1005488 , Geographic information systems , Earth sciences -- Remote sensing , Environmental degradation -- South Africa -- Eastern Cape -- Great Fish River Valley , Forest degradation -- South Africa -- Eastern Cape -- Great Rish River Valley
- Description: Using a range of satellite-derived indices I describe. monitor and predict vegetation conditions that exist in the Great Fish River Valley, Eastern Cape. The heterogeneous nature of the area necessitates that the mapping of vegetation classes be accomplished using a combination of a supervised approach, an unsupervised approach and the use of a Moving Standard Deviation Index (MSDI). Nine vegetation classes are identified and mapped at an accuracy of 84%. The vegetation classes are strongly related to land-use and the communal areas demonstrate a reduction in palatable species and a shift towards dominance by a single species. Nature reserves and commercial rangeland are by contrast dominated by good condition vegetation types. The Modified Soil Adjusted Vegetation Index (MSA VI) is used to map the vegetation production in the study area. The influence of soil reflectance is reduced using this index. The MSA VI proves to be a good predictor of vegetation condition in the higher rainfall areas but not in the more semi-arid regions. The MSA VI has a significant relationship to rainfall but no absolute relationship to biomass. However, a stratification approach (on the basis of vegetation type) reveals that the MSA VI exhibits relationships to biomass in vegetation types occurring in the higher rainfall areas and consisting of a large cover of shrubs. A technique based on an index which describes landscape spatial variability is presented to assist in the interpretation of landscape condition. The research outlines a method for degradation assessment which overcomes many of the problems associated with cost and repeatability. Indices that attempt to provide a correlation with net primary productivity, e.g. NDVI, do not consider changes in the quality of net primary productivity. Landscape variability represents a measure of ecosystem change in the landscape that underlies the degradation process. The hypothesis is that healthy/undisturbed/stable landscapes tend to be less variable and homogenous than their degraded heterogenous counterparts. The Moving Standard Deviation Index (MSDI) is calculated by performing a 3 x 3 moving standard deviation window across Landsat Thematic Mapper (TM) band 3. The result is a sensitive indicator of landscape condition which is not affected by moisture availability and vegetation type. The MSDI shows a significant negative relationship to NDVI confirming its relationship to condition. The cross-classification of MSDI with NDVI allows the identification of invasive woody weeds which exhibit strong photosynthetic signals and would therefore be categorised as good condition using NDVI. Other ecosystems are investigated to determine the relationship between NDVI and MSDI. Where increase in NDVI is disturbance-induced (such as the Kalahari Desert) the relationship is positive. Where high NDVI values are indicative of good condition rangeland (such as the Fish River Valley) the relationship is negative. The MSDI therefore always exhibits a significant positive relationship to degradation irrespective of the relationship of NDVI to condition in the ecosystem.
- Full Text:
- Authors: Tanser, Frank Courteney
- Date: 1997
- Subjects: Geographic information systems , Earth sciences -- Remote sensing , Environmental degradation -- South Africa -- Eastern Cape -- Great Fish River Valley , Forest degradation -- South Africa -- Eastern Cape -- Great Rish River Valley
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4814 , http://hdl.handle.net/10962/d1005488 , Geographic information systems , Earth sciences -- Remote sensing , Environmental degradation -- South Africa -- Eastern Cape -- Great Fish River Valley , Forest degradation -- South Africa -- Eastern Cape -- Great Rish River Valley
- Description: Using a range of satellite-derived indices I describe. monitor and predict vegetation conditions that exist in the Great Fish River Valley, Eastern Cape. The heterogeneous nature of the area necessitates that the mapping of vegetation classes be accomplished using a combination of a supervised approach, an unsupervised approach and the use of a Moving Standard Deviation Index (MSDI). Nine vegetation classes are identified and mapped at an accuracy of 84%. The vegetation classes are strongly related to land-use and the communal areas demonstrate a reduction in palatable species and a shift towards dominance by a single species. Nature reserves and commercial rangeland are by contrast dominated by good condition vegetation types. The Modified Soil Adjusted Vegetation Index (MSA VI) is used to map the vegetation production in the study area. The influence of soil reflectance is reduced using this index. The MSA VI proves to be a good predictor of vegetation condition in the higher rainfall areas but not in the more semi-arid regions. The MSA VI has a significant relationship to rainfall but no absolute relationship to biomass. However, a stratification approach (on the basis of vegetation type) reveals that the MSA VI exhibits relationships to biomass in vegetation types occurring in the higher rainfall areas and consisting of a large cover of shrubs. A technique based on an index which describes landscape spatial variability is presented to assist in the interpretation of landscape condition. The research outlines a method for degradation assessment which overcomes many of the problems associated with cost and repeatability. Indices that attempt to provide a correlation with net primary productivity, e.g. NDVI, do not consider changes in the quality of net primary productivity. Landscape variability represents a measure of ecosystem change in the landscape that underlies the degradation process. The hypothesis is that healthy/undisturbed/stable landscapes tend to be less variable and homogenous than their degraded heterogenous counterparts. The Moving Standard Deviation Index (MSDI) is calculated by performing a 3 x 3 moving standard deviation window across Landsat Thematic Mapper (TM) band 3. The result is a sensitive indicator of landscape condition which is not affected by moisture availability and vegetation type. The MSDI shows a significant negative relationship to NDVI confirming its relationship to condition. The cross-classification of MSDI with NDVI allows the identification of invasive woody weeds which exhibit strong photosynthetic signals and would therefore be categorised as good condition using NDVI. Other ecosystems are investigated to determine the relationship between NDVI and MSDI. Where increase in NDVI is disturbance-induced (such as the Kalahari Desert) the relationship is positive. Where high NDVI values are indicative of good condition rangeland (such as the Fish River Valley) the relationship is negative. The MSDI therefore always exhibits a significant positive relationship to degradation irrespective of the relationship of NDVI to condition in the ecosystem.
- Full Text:
The use of remote sensing and Geographic Information System (GIS) techniques, to interpret savanna ecosystem patterns in the Sabi Sand Game Reserve, Mpumalanga province
- Fortescue, Alexander Kenneth John
- Authors: Fortescue, Alexander Kenneth John
- Date: 1997
- Subjects: Sabi-Sand Game Reserve (South Africa) , Savanna ecology -- South Africa -- Mpumalanga , Geographic information systems , Savanna ecology -- Remote sensing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4857 , http://hdl.handle.net/10962/d1005533 , Sabi-Sand Game Reserve (South Africa) , Savanna ecology -- South Africa -- Mpumalanga , Geographic information systems , Savanna ecology -- Remote sensing
- Description: This thesis explores techniques which ultimately strive to optimize production systems in rangeland areas of southern Africa. By linking spatially significant, satellite derived data to practical measurements of vegetation structure, valuable insight has been derived on processes of ecosystem function, in the Sabi Sand Game Reserve. A broad ecosystem response mechanism has been established from a conventional Normalized Differentiation Vegetation Index (NDVI). By responding to increases in production, which are driven by disturbance, this index has allowed quantitative systems theory in savanna to be tested and refined. Methods of biomass and production estimation which are specifically designed to reduce the cost and time involved with the more conventional method of destructive harvesting have been tested in the savanna at the Sabi Sand Game Reserve. Results from these estimates relate well with data derived through destructive harvesting in structurally similar savanna. Moreover, by relating the above-ground woody production estimates to remere sensing indices, it was possible to demonstrate that the problem of extrapolation, universal to most biomass and production studies can be overcome. Since remote sensing encompasses an array of tools fundamental to rangeland inventory, monitoring and management, valuable spatially significant information pertaining to ecosystem structure and function has been provided for managers in the Sabi Sand Game Reserve.
- Full Text:
- Authors: Fortescue, Alexander Kenneth John
- Date: 1997
- Subjects: Sabi-Sand Game Reserve (South Africa) , Savanna ecology -- South Africa -- Mpumalanga , Geographic information systems , Savanna ecology -- Remote sensing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4857 , http://hdl.handle.net/10962/d1005533 , Sabi-Sand Game Reserve (South Africa) , Savanna ecology -- South Africa -- Mpumalanga , Geographic information systems , Savanna ecology -- Remote sensing
- Description: This thesis explores techniques which ultimately strive to optimize production systems in rangeland areas of southern Africa. By linking spatially significant, satellite derived data to practical measurements of vegetation structure, valuable insight has been derived on processes of ecosystem function, in the Sabi Sand Game Reserve. A broad ecosystem response mechanism has been established from a conventional Normalized Differentiation Vegetation Index (NDVI). By responding to increases in production, which are driven by disturbance, this index has allowed quantitative systems theory in savanna to be tested and refined. Methods of biomass and production estimation which are specifically designed to reduce the cost and time involved with the more conventional method of destructive harvesting have been tested in the savanna at the Sabi Sand Game Reserve. Results from these estimates relate well with data derived through destructive harvesting in structurally similar savanna. Moreover, by relating the above-ground woody production estimates to remere sensing indices, it was possible to demonstrate that the problem of extrapolation, universal to most biomass and production studies can be overcome. Since remote sensing encompasses an array of tools fundamental to rangeland inventory, monitoring and management, valuable spatially significant information pertaining to ecosystem structure and function has been provided for managers in the Sabi Sand Game Reserve.
- Full Text:
An examination of the application of a geographical information system to rural development planning in Shixini Location, Transkei
- Authors: Whisken, Jarrell Braden
- Date: 1996
- Subjects: Rural development projects -- South Africa -- Transkei -- Shixini -- Planning , Shixini rural development project , Geographic information systems
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:4830 , http://hdl.handle.net/10962/d1005505 , Rural development projects -- South Africa -- Transkei -- Shixini -- Planning , Shixini rural development project , Geographic information systems
- Description: Digital geographical information systems (GIS) are tools for handling spatial data. Initially developed in First World countries, the technology is fast being taken up as a tool for handling spatial information by many Third World countries. GIS has been used for any number of applications involving spatial data, one of its primary uses has been in various planning fields where the advantages offered to planners by the technology have been highlighted by a number of publications and studies. GIS has been actively used as an urban planning tool in South Africa since the mid-1980s, (Vosloo 1987) however its use as a tool for rural planning has not developed to the same extent. As early as 1986 reference was made to the possible advantages offered by GIS to rural planning in South Africa (Fincham 1986). Despite this early recognition, the use of GIS in the rural planning sphere remains negligible. This study examines the. possible reasons for this by attempting to answer the question, "is GIS appropriate to rural planning in South Africa?" A number of approaches to rural planning are practised in South Africa. This study examines the appropriateness of applying GIS to one of these approaches, rural community development planning. Components of the study included i) an examination of the issues affecting the use of GIS in the rural development field, achieved through the use of a literature and questionnaire survey and ii) a case study examining the feasibility of incorporating GIS as a tool to the Shixini Development Project, Transkei. The study does not examine the intricacies of rural development theory, but it does acknowledge the fact that the approach employed by an organisation to rural development will have important implications concerning the use of a GIS in a project. The approach adopted to a project affects amongst others the administrative structure, the planning process, the flow of spatial data and its use, and consequently the possible role of GIS. The Shixini Rural Development Project was classified as a community development project, and as a result the study concentrates on this approach to rural development. This may limit the study to a particular planning process, however most rural case studies will have certain aims and factors which are unique to its situation. In order to place the results of the Shixini case study in a wider context the results of the study are linked to the questionnaire and literature survey. From this basis the usefulness of GIS in the rural development sphere was examined. Available literature on GIS indicates that the majority of problems associated with GIS rarely reside with the technology itself but rather with its supporting mechanisms. The study identified and concentrated on these support mechanisms, both at the project level and what is referred to in the study as the operating environment in South Africa. The results of the study revealed that a number of problems exist with regard to the attitude with which GIS is regarded in development organisations. It was found that these attitudes are legitimately based on a number of problems associated with incorporating the technology into project based organisations. It was concluded that GIS was appropriate to rural community planning, but is presently limited to certain aspects of the planning process and possibly to certain applications.
- Full Text:
- Authors: Whisken, Jarrell Braden
- Date: 1996
- Subjects: Rural development projects -- South Africa -- Transkei -- Shixini -- Planning , Shixini rural development project , Geographic information systems
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:4830 , http://hdl.handle.net/10962/d1005505 , Rural development projects -- South Africa -- Transkei -- Shixini -- Planning , Shixini rural development project , Geographic information systems
- Description: Digital geographical information systems (GIS) are tools for handling spatial data. Initially developed in First World countries, the technology is fast being taken up as a tool for handling spatial information by many Third World countries. GIS has been used for any number of applications involving spatial data, one of its primary uses has been in various planning fields where the advantages offered to planners by the technology have been highlighted by a number of publications and studies. GIS has been actively used as an urban planning tool in South Africa since the mid-1980s, (Vosloo 1987) however its use as a tool for rural planning has not developed to the same extent. As early as 1986 reference was made to the possible advantages offered by GIS to rural planning in South Africa (Fincham 1986). Despite this early recognition, the use of GIS in the rural planning sphere remains negligible. This study examines the. possible reasons for this by attempting to answer the question, "is GIS appropriate to rural planning in South Africa?" A number of approaches to rural planning are practised in South Africa. This study examines the appropriateness of applying GIS to one of these approaches, rural community development planning. Components of the study included i) an examination of the issues affecting the use of GIS in the rural development field, achieved through the use of a literature and questionnaire survey and ii) a case study examining the feasibility of incorporating GIS as a tool to the Shixini Development Project, Transkei. The study does not examine the intricacies of rural development theory, but it does acknowledge the fact that the approach employed by an organisation to rural development will have important implications concerning the use of a GIS in a project. The approach adopted to a project affects amongst others the administrative structure, the planning process, the flow of spatial data and its use, and consequently the possible role of GIS. The Shixini Rural Development Project was classified as a community development project, and as a result the study concentrates on this approach to rural development. This may limit the study to a particular planning process, however most rural case studies will have certain aims and factors which are unique to its situation. In order to place the results of the Shixini case study in a wider context the results of the study are linked to the questionnaire and literature survey. From this basis the usefulness of GIS in the rural development sphere was examined. Available literature on GIS indicates that the majority of problems associated with GIS rarely reside with the technology itself but rather with its supporting mechanisms. The study identified and concentrated on these support mechanisms, both at the project level and what is referred to in the study as the operating environment in South Africa. The results of the study revealed that a number of problems exist with regard to the attitude with which GIS is regarded in development organisations. It was found that these attitudes are legitimately based on a number of problems associated with incorporating the technology into project based organisations. It was concluded that GIS was appropriate to rural community planning, but is presently limited to certain aspects of the planning process and possibly to certain applications.
- Full Text:
Semi-automated extraction of structural orientation data from aerospace imagery combined with digital elevation models
- Authors: Slabber, Frans Bresler
- Date: 1996
- Subjects: Image processing , Geographic information systems , Information storage and retrieval systems -- Geology , Geology -- Data processing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5001 , http://hdl.handle.net/10962/d1005614 , Image processing , Geographic information systems , Information storage and retrieval systems -- Geology , Geology -- Data processing
- Description: A computer-based method for determining the orientation of planar geological structures from remotely sensed images, utilizing digital geological images and digital elevation models (DEMs), is developed and assessed. The method relies on operator skill and experience to recognize geological structure traces on images, and then employs software routines (GEOSTRUC©) to calculate the orientation of selected structures. The operator selects three points on the trace of a planar geological feature as seen on a digital geological image that is co registered with a DEM of the same area. The orientation of the plane that contains the three points is determined using vector algebra equations. The program generates an ASCII data file which contains the orientation data as well as the geographical location of the measurements. This ASCII file can then be utilized in further analysis of the orientation data. The software development kit (SDK) for TNTmips v5.00, from MicroImages Inc. and operating in the X Windows environment, was employed to construct the software. The Watcom C\C++ Development Environment was used to generate the executable program, GEOSTRUC© . GEOSTRUC© was tested in two case studies. The case studies utilized digital data derived from the use of different techniques and from different sources which varied in scale and resolution. This was done to illustrate the versatility of the program and its application to a wide range of data types. On the whole, the results obtained using the GEOSTRUC© analyses compare favourably to field data from each test area. Use of the method to determine the orientation of axial planes in the case study revealed the usefulness of the method as a powerful analytic tool for use on a macroscopic scale. The method should not he applied in area with low variation in relief as the method proved to be less accurate in these areas. Advancements in imaging technology will serve to create images with better resolution, which will, in turn, improve the overall accuracy of the method.
- Full Text:
- Authors: Slabber, Frans Bresler
- Date: 1996
- Subjects: Image processing , Geographic information systems , Information storage and retrieval systems -- Geology , Geology -- Data processing
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5001 , http://hdl.handle.net/10962/d1005614 , Image processing , Geographic information systems , Information storage and retrieval systems -- Geology , Geology -- Data processing
- Description: A computer-based method for determining the orientation of planar geological structures from remotely sensed images, utilizing digital geological images and digital elevation models (DEMs), is developed and assessed. The method relies on operator skill and experience to recognize geological structure traces on images, and then employs software routines (GEOSTRUC©) to calculate the orientation of selected structures. The operator selects three points on the trace of a planar geological feature as seen on a digital geological image that is co registered with a DEM of the same area. The orientation of the plane that contains the three points is determined using vector algebra equations. The program generates an ASCII data file which contains the orientation data as well as the geographical location of the measurements. This ASCII file can then be utilized in further analysis of the orientation data. The software development kit (SDK) for TNTmips v5.00, from MicroImages Inc. and operating in the X Windows environment, was employed to construct the software. The Watcom C\C++ Development Environment was used to generate the executable program, GEOSTRUC© . GEOSTRUC© was tested in two case studies. The case studies utilized digital data derived from the use of different techniques and from different sources which varied in scale and resolution. This was done to illustrate the versatility of the program and its application to a wide range of data types. On the whole, the results obtained using the GEOSTRUC© analyses compare favourably to field data from each test area. Use of the method to determine the orientation of axial planes in the case study revealed the usefulness of the method as a powerful analytic tool for use on a macroscopic scale. The method should not he applied in area with low variation in relief as the method proved to be less accurate in these areas. Advancements in imaging technology will serve to create images with better resolution, which will, in turn, improve the overall accuracy of the method.
- Full Text:
Methods for assessing the susceptibility of freshwater ecosystems in Southern Africa to invasion by alien aquatic animals
- Authors: De Moor, Irene J
- Date: 1994
- Subjects: Biotic communities -- South Africa , Animal introduction , Freshwater ecology -- Africa, Southern , Animal introduction -- South Africa , Geographic information systems
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:5300 , http://hdl.handle.net/10962/d1005145
- Description: Two methods for predicting regions susceptible to invasion by alien aquatic animals were developed for southern Africa (excluding Zimbabwe and Mozambique). In the "traditional" (data-poor) approach, distributions of three categories of alien "indicator" species (warm mesothermal, cold stenothermal and eurytopic) were compared to seven existing biogeographical models of distribution patterns of various animals in southern Africa. On the basis of these comparisons a synthesis model was developed which divided southern Africa into seven regions characterised by their susceptibility to invasion by alien aquatic animals with particular habitat requirements. In the "data-rich," geographic information systems (GIS) approach, the distribution of trout (Oncorhynchus mykiss and Salmo trutta) in selected "sampled regions" was related to elevation (as a surrogate of water temperature) and median annual rainfall (MAR) (as a surrogate of water availability). Using concentration analysis, optimum conditions for trout were identified. Regions within a larger "predictive area" which satisfied these conditions, were plotted as a digital map using the IDRISI package. Using this method seven models of potential trout distribution were generated for the following regions: northern Natal (two); southern Natal/Lesotho/Transkei (three), eastern Cape (two) and western Cape (two). Since two of the models were used to refine the methods, only five models were considered for the final assessment. In a modification of the GIS method, another model of potential trout distribution, based on mean monthly July minimum air temperature and MAR parameters, was developed for the region bounded by 29º - 34º S and 26 º - 32°E. This model showed marked similarities to another model, developed for the region bounded by 29 º - 32°S and 26º - 32°E, which was based on elevation and MAR parameters. The validity of the models developed was assessed by independent experts. Of the six models considered, four received favourable judgements, one was equivocal and one was judged to be poor. Based on these assessments it was concluded that the GIS method has credibility and could be used to develop a "data-rich" model of the susceptibility of southern Africa to invasion by alien aquatic animals. This method represents an alternative to the bioclimatic matching approach developed by scientists in Australia. The GIS method has a number of advantages over the "traditional" method: it is more amenable to testing, has greater flexibility, stores more information, produces images of a finer resolution, and can be easily updated. The traditional method has the advantage of being less expensive and requiring a less extensive database.
- Full Text:
- Authors: De Moor, Irene J
- Date: 1994
- Subjects: Biotic communities -- South Africa , Animal introduction , Freshwater ecology -- Africa, Southern , Animal introduction -- South Africa , Geographic information systems
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:5300 , http://hdl.handle.net/10962/d1005145
- Description: Two methods for predicting regions susceptible to invasion by alien aquatic animals were developed for southern Africa (excluding Zimbabwe and Mozambique). In the "traditional" (data-poor) approach, distributions of three categories of alien "indicator" species (warm mesothermal, cold stenothermal and eurytopic) were compared to seven existing biogeographical models of distribution patterns of various animals in southern Africa. On the basis of these comparisons a synthesis model was developed which divided southern Africa into seven regions characterised by their susceptibility to invasion by alien aquatic animals with particular habitat requirements. In the "data-rich," geographic information systems (GIS) approach, the distribution of trout (Oncorhynchus mykiss and Salmo trutta) in selected "sampled regions" was related to elevation (as a surrogate of water temperature) and median annual rainfall (MAR) (as a surrogate of water availability). Using concentration analysis, optimum conditions for trout were identified. Regions within a larger "predictive area" which satisfied these conditions, were plotted as a digital map using the IDRISI package. Using this method seven models of potential trout distribution were generated for the following regions: northern Natal (two); southern Natal/Lesotho/Transkei (three), eastern Cape (two) and western Cape (two). Since two of the models were used to refine the methods, only five models were considered for the final assessment. In a modification of the GIS method, another model of potential trout distribution, based on mean monthly July minimum air temperature and MAR parameters, was developed for the region bounded by 29º - 34º S and 26 º - 32°E. This model showed marked similarities to another model, developed for the region bounded by 29 º - 32°S and 26º - 32°E, which was based on elevation and MAR parameters. The validity of the models developed was assessed by independent experts. Of the six models considered, four received favourable judgements, one was equivocal and one was judged to be poor. Based on these assessments it was concluded that the GIS method has credibility and could be used to develop a "data-rich" model of the susceptibility of southern Africa to invasion by alien aquatic animals. This method represents an alternative to the bioclimatic matching approach developed by scientists in Australia. The GIS method has a number of advantages over the "traditional" method: it is more amenable to testing, has greater flexibility, stores more information, produces images of a finer resolution, and can be easily updated. The traditional method has the advantage of being less expensive and requiring a less extensive database.
- Full Text:
- «
- ‹
- 1
- ›
- »