Inhibition of aluminium corrosion using phthalocyanines: Experimental and computational studies
- Authors: Nnaji, Nnaemeka Joshua
- Date: 2022-04-08
- Subjects: Aluminum Corrosion , Electrochemistry , Phthalocyanines , Corrosion and anti-corrosives , Protective coatings , Density functionals
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/294643 , vital:57240 , DOI 10.21504/10962/294643
- Description: Metal deterioration over time is a process known as corrosion, an electrochemical process, which can occur by surface chemical actions on metals by its environment. Metal corrosion have great economic, security, and environmental consequences, and its control is a major research area in corrosion science. Amongst the different corrosion protecting approaches, the use of corrosion inhibitors and protective coatings have attracted enormous research interest in this area of scholasticism. This has necessitated the computational and electrochemical investigations of aluminium corrosion inhibitive potentials of some compounds in 1M HCl. Metal free (5_H2), ClGa(III) (5_Ga) and Co(II) (5_Co) tetrakis(4-acetamidophenoxy)phthalocyanines as well as Co(II) 2,9,16-tris(4-(tert-butyl)phenoxy)-23-(pyridin-4-yloxy)phthalocyanine (6) and Co(II) 2,9,16,24-tetrakis(4-(tert-butyl)phenoxy)phthalocyanine (7) were synthesized for the first time and studied for corrosion inhibition. The reported ClGa(III) tetrakis(benzo[d]thiazol-2-yl-thio)phthalocyaninine (1), ClGa(III) tetrakis(benzo[d]thiazol-2ylphenoxy)phthalocyanine (2), ClGa(III) tetrakis-4-(hexadecane-1,2-dioxyl)-bis(phthalocyanine) (3) and ClGa(III) tetrakis-4,4′-((4-(benzo[d]thiazol-2-yl)-1,2-bis(phenoxy)-bis(phthalocyanine) (4) were also employed for corrosion inhibition of Al in HCl. Corrosion inhibition measurements using electrochemical techniques showed that increased π conjugation caused (1) to (2) to outperform (1a) and (2a) respectively as aluminium corrosion inhibitors in 1.0 M hydrochloric acid. For similar reason, (4) outperformed 2. (1) and (2) were successfully electrodeposited onto aluminium for corrosion retardation in 1.0 M hydrochloric acid solution. Measurements obtained from electrochemical impedance spectroscopy gave corrosion inhibition efficiency values of 82% for 1 and 86% for 2 in 1.0 M hydrochloric acid solution and showed that electrodeposited phthalocyanines have enhanced aluminium corrosion retardation than when in solution. The use of reduced graphene oxide nanosheets (rGONS) alone as aluminium corrosion inhibitor is discouraged because of poor aluminium corrosion inhibition in 1M HCl. However, synergistic effects were observed when rGONS was mixed each with (4) and (3). (5_H2), (5_Ga) and (5_Co) decreased aluminium corrosion in 1M HCl and observation was that the heavier the atom the more decreased the protection and the free base performed best of the three. Studied tertbutylphenoxy-derived CoPcs (6 and 7) exhibited good aluminium corrosion inhibition properties in studied acidic solution and the unsymmetric CoPc (6) which has more heteroatoms, gave better performance. Quantum chemical calculations involved the use of density functional theoretical (DFT) approaches and gave results which corroborated with experimental findings. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-04-08
A theoretical study of alkoxyl radical and radical cation mediated cyclisation reactions in unsaturated alkanols
- Authors: Lee, Peter Mattison Clarke
- Date: 2021-04
- Subjects: Gqeberha (South Africa) , Eastern Cape (South Africa) , Density functionals
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/52130 , vital:43430
- Description: A large part of this computational study focussed on selectivity patterns for 4-penten- 1-oxyl radical 1,5- and 1,6-cyclisations and for those of analogous 5-hexenyl, 4- penten-1-aminyl, 4-penten-1-iminyl and 3-phenylpropan-1-oxyl radicals. The study furthermore included cyclisation reactions of the radical cations of 4-penten-1-ol and 3-phenylpropan-1-ol. Calculations were performed for all applicable species involved in the two cyclisation modes studied, i.e. 1,5- and 1,6-cyclisation. These species included radical and radical cation precursors, as well as relevant radical transition state structures and radical adducts. All cyclisation systems investigated used the Density Functional Theory (DFT) functional B3LYP with a combination of eight basis sets. Each basis set used was a progressively higher level of theory than B3LYP/6-31G* which was used as a starting point. Cyclisations for unsubstituted species, e.g. the 4-penten-1-oxyl radical 1,5- and 1,6-cyclisations, were also simulated using the ωB97X-D and ωB97X-V functionals which account for dispersive effects. The same set of eight basis sets were used with these two functionals. , Thesis (PhD) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
- Full Text: false
- Date Issued: 2021-04
Development of a computational chemistry scheme for testing the utility of synthetic bacteriochlorin in dye-sensitized solar cells
- Authors: Kota, Ntsika
- Date: 2018
- Subjects: Dye-sensitized solar cells , Computational chemistry , Density functionals , Electronic excitation , Molecular orbitals , Oscillator strengths , Bacteriochlorin
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/62327 , vital:28155
- Description: A computational chemistry scheme, based on density functional theory, was developed for in silico testing of a few bacteriochlorin properties relevant to dye-sensitized solar cells. These properties included electronic excitation wavelengths, molecular orbital energy levels, and oscillator strengths among others. Comparisons were made among four species, using computational proxies for electron injection quantum yield and photo-induced current production. The proxy measures for current production (frontier orbital energy level and short circuit current) made consistent, though qualitative, predictions about the ranking of the four dyes. The proxy measures for electron injection quantum yield (change in planar dipole moment and density of states) made less categorical predictions about the ranking. Overall, the scheme singled out one dye as the worst, but made no conclusive predictions about the relative ranking of the other three. There was insufficient data for comparison of the ranking predictions with experiment.
- Full Text:
- Date Issued: 2018
Studies towards the development of novel multidentate ligands
- Authors: Magqi, Nceba
- Date: 2007
- Subjects: Density functionals , Ligands , Ligands -- Design , Ligands -- Analysis , Camphor
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4358 , http://hdl.handle.net/10962/d1005023 , Density functionals , Ligands , Ligands -- Design , Ligands -- Analysis , Camphor
- Description: In this study, attention has been given to the design and synthesis of novel multidentate ligands for use in the construction of ruthenium-based metathesis catalysts, and their chelating potential has been explored by computer modelling at the Density Functional Theory (DFT) level. Both Kemp’s triacid (1,3,5-trimethyl-1,3,5-cyclohexanetricarboxylic acid) and D-(+)-camphor have been investigated as molecular scaffolds for the development of such ligands. However selective elaboration of the functional groups in Kemp’s triacid proved difficult to achieve, and the research has focused on the development of camphor derivatives. The synthesis of the camphor-based ligands has involved C-8 functionalisation and ring-opening of the bicyclic system to afford tridentate products. The formation of 9-iodocamphorquinone bis(ethylene ketal) together with the desired product, the 8-iodo isomer, has been confirmed by single crystal X-ray analysis of both compounds. Formation of the 9-iodo analogue has provided new insights into the intramolecular rearrangement of camphor skeleton, and the mechanistic implications have been assessed by coset analysis. Attempts to effect nucleophilic displacement of the 8-halogeno groups by nucleophilic donor moieties proved unexpectedly difficult and, coupled with the susceptibility of the carbonyl groups to nucleophilic attack, has led to the formation of novel tricyclic products, viz., 1,6-dimethyl-3-(2-pyridylamino)-4-oxatricyclo[4.3.0.0[superscript 3,7]]-2-nonanone and 6,7-dimethyl-3-(2-pyridylamino)-4-oxatricyclo -[4.3.0.0[superscript 3,7]]-2-nonanone. However the diphenylphosphine group was successfully introduced at C-8 and oxidative ring-opening of the camphor skeleton has afforded the tridentate ligands, 2-(diphenylphosphinoylmethyl)-1,2-dimethyl-1,3-cyclopentanedicarboxylic acid and 2-(diphenylphosphinoylmethyl)-1,3-bis(hydroxymethyl)1,2-dimethylcyclopentane. One- and two-dimensional NMR and, where appropriate, high-resolution MS methods have been used to characterise the products. Three [superscript 13]C NMR chemical shift prediction programmes, viz., ChemWindow and the MODGRAPH neural network and HOSE (Hierachially Ordered Spherical description of Environment), have been applied to representative compounds to assess their efficacy. While the predicted shifts correlated reasonably well with the experimental data, they proved to be insufficiently accurate to differentiate the isomeric systems examined.
- Full Text:
- Date Issued: 2007