Quantitation of zolpidem in biological fluids by electro-driven microextraction combined with HPLC-UV analysis
- Authors: Yaripour, Saeid , Mohammadi, Ali , Esfanjani, Isa , Walker, Roderick B , Nojavan, Saeed
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184723 , vital:44266 , xlink:href="http://dx.doi.org/10.17179/excli2018-1140"
- Description: In this study, for the first time, an electro-driven microextraction method named electromembrane extraction combined with a simple high performance liquid chromatography and ultraviolet detection was developed and validated for the quantitation of zolpidem in biological samples. Parameters influencing electromembrane extraction were evaluated and optimized. The membrane consisted of 2-ethylhexanol immobilized in the pores of a hollow fiber. As a driving force, a 150 V electric field was applied to facilitate the analyte migration from the sample matrix to an acceptor solution through a supported liquid membrane. The pHs of donor and acceptor solutions were optimized to 6.0 and 2.0, respectively. The enrichment factor was obtained >75 within 15 minutes. The effect of carbon nanotubes (as solid nano-sorbents) on the membrane performance and EME efficiency was evaluated. The method was linear over the range of 10-1000 ng/mL for zolpidem (R2 >0.9991) with repeatability (%RSD) between 0.3 % and 7.3 % (n = 3). The limits of detection and quantitation were 3 and 10 ng/mL, respectively. The sensitivity of HPLC-UV for the determination of zolpidem was enhanced by electromembrane extraction. Finally, the method was employed for the quantitation of zolpidem in biological samples with relative recoveries in the range of 60-79 %.
- Full Text:
- Date Issued: 2018
Amoxicillin removal from aqueous media using multi-walled carbon nanotubes
- Authors: Mohammadi, Ali , Kazemipour, Maryam , Walker, Roderick B , Ansari, Mehdi
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183861 , vital:44076 , xlink:href="https://doi.org/10.1080/1536383X.2013.866944"
- Description: Multi-walled carbon nanotubes (MWCNT) were used to separate amoxicillin from aqueous media. The parameters affecting amoxicillin adsorption such as pH, temperature, time, interferences of similar molecules, and the amount of adsorbent used were studied. Amoxicillin adsorption using MWCNT was compared to that using Fullerene C60 and activated carbon (AC). The adsorption efficiency of 0.1 and 0.2 g of MWCNT using in a continuous mode were 86.5% and 87.9%, respectively. Evaluation of the adsorbent capacity showed that each gram of MWCNT can absorb 22.9 mg amoxicillin. The effect of pH was studied over the range 2–8 and revealed that adsorption of the amoxicillin at the initial pH of 4.6 was more effective than any other pH. The adsorption of amoxicillin on MWCNT was much greater than Fullerene C60 and AC. Adsorption data showed that they were best fitted to the Langmuir isotherm.
- Full Text:
- Date Issued: 2015
Synthesis and characterization of ZnO nanoparticle synthesized by a microwave-assisted combustion method and catalytic activity for the removal of ortho-nitrophenol
- Authors: Assi, Navid , Mohammadi, Ali , Sadr Manuchehri, Q , Walker, Roderick B
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183850 , vital:44075 , xlink:href="https://doi.org/10.1080/19443994.2014.891083"
- Description: ZnO nanoparticles were manufactured using microwave-assisted combustion. The structural and morphological properties of the nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Photocatalytic degradation of ortho-nitrophenol (O-NP) in aqueous solution using the synthesized nanoparticles was performed under UV–C irradiation and is reported for the first time. The effect of the initial O-NP concentration, amount of photocatalyst, pH, and salt was investigated during photodegradation. Analysis of the degraded samples using HPLC with UV detection revealed that photocatalysis in the presence of ZnO nanoparticles removed 98% of the O-NP in 5 h. In addition, the photocatalytic degradation kinetics of O-NP were studied, and the results suggest that the data are best fitted to pseudo-first-order kinetic and Langmuir–Hinshelwood models.
- Full Text:
- Date Issued: 2015
Electropolymerized Fluorinated Aniline-Based Fiber for Headspace Solid-Phase Microextraction and Gas Chromatographic Determination of Benzaldehyde in Injectable Pharmaceutical Formulations
- Authors: Mohammadi, Ali , Mohammadi, Somayeh , Moghaddam, Bayandori A , Masoumi, Vahideh , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184120 , vital:44175 , xlink:href="https://doi.org/10.1093/chromsci/bmt152"
- Description: In this study, a simple method was developed and validated to detect trace levels of benzaldehyde in injectable pharmaceutical formulations by solid-phase microextraction coupled with gas chromatography–flame ionization detector. Polyaniline was electrodeposited on a platinum wire in trifluoroacetic acid solvent by cyclic voltammetry technique. This fiber shows high thermal and mechanical stability and high performance in extraction of benzaldehyde. Extraction and desorption time and temperature, salt effect and gas chromatography parameters were optimized as key parameters. At the optimum conditions, the fiber shows good linearity between peak area ratio of benzaldehyde/3-chlorobenzaldehyde and benzaldehyde concentration in the range of 50–800 ng/mL with percent relative standard deviation values ranging from 0.75 to 8.64% (n 5 3). The limits of quantitation and detection were 50 and 16 ng/mL, respectively. The method has the requisite selectivity, sensitivity, accuracy and precision to assay benzaldehyde in injectable pharmaceutical dosage forms.
- Full Text:
- Date Issued: 2014
Electro‐oxidation of acetaminophen on nickel/poly (o‐aminophenol)/multi‐walled carbon nanotube nanocomposite modified graphite electrode.
- Authors: Naeemy, Ali , Mohammadi, Ali , Bakhtiari, Hediech , Ashouri, Nasim , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184107 , vital:44173 , xlink:href="https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/mnl.2014.0197"
- Description: Poly(o-aminophenol) (POAP)/multi-walled carbon nanotube (MWCNT) nanocomposite and POAP in the absence of the MWCNT were fabricated by consecutive cyclic voltammetry (CV) on a graphite (G) electrode. The dispersion of nickel (II) ions was accomplished and incorporated into the polymeric electrodes (G/POAP and G/POAP-MWCNT) by immersing them into a 0.1 M nickel (II) solution. Following preparation of G/POAP/Ni and G/POAP-MWCNT/Ni, the electrochemical behaviour was examined using CV. Scanning electron microscopy was used for characterisation of the nanocomposite. The prepared electrodes showed enhanced electrocatalytic activity for the oxidation of acetaminophen and facilitated the detection of acetaminophen in a 0.1 M NaOH solution. Compared with the G/POAP/Ni electrode, the G/POAP-MWCNT/Ni electrode had a significant current response of acetaminophen oxidation because of the synergistic effects of POAP and the MWCNT. By CV, the calibration plot was linear in the range of 1–13 mM with standard deviation between 0.3 and 6.54% for acetaminophen. The G/POAP-MWCNT/Ni was successfully applied for acetaminophen determination in tablets and the results showed sufficient precision and achieved a mean recovery of 96.8% (R.S.D. = 4.9%).
- Full Text:
- Date Issued: 2014
Development of a stability-indicating high performance liquid chromatographic method for the analysis of topiramate and dissolution rate testing in topiramate tablets
- Authors: Mohammadi, Ali , Rezanour, Nasrin , Ansari Dogaheh, M , Walker, Roderick B
- Date: 2010
- Language: English
- Type: text , Article
- Identifier: vital:6412 , http://hdl.handle.net/10962/d1006507
- Description: A stability-indicating high performance liquid chromatographic(HPLC) method was developed and validated for the quantitation and dissolution determination of topiramate in tablet dosage forms. An isocratic separation was achieved using a phenyl column with a flow rate of 1 mL/min using UV detection at 264 nm. Topiramate has low UV absorbtivity and was subjected to derivatization with 9-fluorenylmethyl chloroformate (FMOC-Cl). The mobile phase for the separation consisted of acetonitrile: 50 mM sodium dihydrogen phosphate(NaH2PO4) containing 3 % v/v triethylamine (pH 2.8) in a 48:52 v/v ratio. Topiramate was subjected to oxidation, hydrolysis, photolysis and heat for the purposes of stress testing. Separation was achieved for the parent compound and all the degradation products in an overall analytical run time of approximately 15 min with the parent compound topiramate eluting at approximately 9.2 min. The method was linear over the concentration range of 1-100 μg/mL (r = 0.9996) with limits of quantitation and detection of 1 and 0.3 μg/mL, respectively.
- Full Text:
- Date Issued: 2010
Simultaneous determination of irinotecan hydrochloride and its related compounds by high performance liquid chromatography using ultraviolet detection
- Authors: Mohammadi, Ali , Esmaeili, Farnaz , Dinarvand, Rassoul , Atyabi, Fatemeh , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article
- Identifier: vital:6413 , http://hdl.handle.net/10962/d1006508
- Description: A new simple, precise and accurate high performance liquid chromatography (HPLC) method was developed and validated for the simultaneous determination of irinotecan (CPT-11) and two related compounds viz., 7-ethyl-10 hydroxycamptothecin (SN-38) and camptothecin (CPT) in pharmaceutical dosage forms. Chromatography was accomplished using a reversed-phase C18 column and ultraviolet (UV)detection and an isocratic mobile phase consisting of 3 % v/v triethylammonium acetate buffer (pH 3) and acetonitrile (70:30 v/v). The linear range of quantitation for all the compounds was 0.1-10 μg/mL. The limit of quantitation for all the compounds ranged between 0.01-0.05 μg/mL. The method has the requisite accuracy, selectivity, sensitivity and precision to assay of CPT-11 and related compounds in pharmaceutical dosage forms and bulk API.
- Full Text:
- Date Issued: 2010
The determination of acetaminophen using a carbon nanotube: graphite-based electrode
- Authors: Moghaddam, Abdolmajid B , Mohammadi, Ali , Mohammadi, Somaye , Rayeji, Danyal , Dinarvand, Rassoul , Baghi, Mansoureh , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article , text
- Identifier: vital:6414 , http://hdl.handle.net/10962/d1006509
- Description: The oxidation of acetaminophen was studied at a glassy carbon electrode modified with multi-walled carbon nanotubes and a graphite paste. Cyclic voltammety, differential pulse voltammetry and square wave voltammetry at various pH values, scan rates, and the effect of the ratio of nanotubes to graphite were investigated in order to optimize the parameters for the determination of acetaminophen. Square wave voltammetry is the most appropriate technique in giving a characteristic peak at 0.52 V at pH 5. The porous nanostructure of the electrode improves the surface area which results in an increase in the peak current. The voltammetric response is linear in the range between 75 and 2000 ng.mL−1, with standard deviations between 0.25 and 7.8%, and a limit of detection of 25 ng.mL−1. The method has been successfully applied to the analysis of acetaminophen in tablets and biological fluids.
- Full Text:
- Date Issued: 2010
Development and validation of a stability-indicating method for the quantitation of paclitaxel in pharmaceutical dosage forms
- Authors: Mohammadi, Ali , Esimaeili, Farnaz , Dinarvand, Rasoul , Atyabi, Fatemeh , Walker, Roderick B
- Date: 2009
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184278 , vital:44196 , xlink:href="https://doi.org/10.1093/chromsci/47.7.599"
- Description: A simple, rapid stability-indicating isocratic assay has been developed and validated for the determination of Paclitaxel (PTX) in commercial injection formulations. The assay is performed using a Nucleosil RP-18 (5 µm, 250 × 4.0 mm i.d) column protected by a Nucleosil C18 precolumn (5 µm, 4.0 × 4.0 mm i.d.) with a mobile phase of methanol–water (80:20) and UV detection at 230 nm. The method was found to be specific for PTX in the presence of degradation products with an overall analytical run time of ~ 9 min. Accuracy reported as % bias was found to be 0.1–2.5% bias for all samples tested. Intra-assay precision (repeatability) was found to be 0.22–2.65% RSD, while inter-day precision (intermediate precision) was found to be 1.0–3.0% RSD for the samples studied. The calibration curve was found to be linear with the equation y = 29.78x + 7.65, and a linear regression coefficient of 0.9994 over the concentration range 0.05–20 µg/mL. The limits of quantitation and detection were 0.05 and 0.02 µg/mL, respectively. Taxol (30 mg/5 mL), a commercially available dosage form of PTX, was assayed and 100.6–103.6% of the label claim was recovered.
- Full Text:
- Date Issued: 2009
Synthesis of molecularly imprinted polymer for selective solid-phase extraction of Salbutamol from urine samples
- Authors: Mohammadi, Ali , Alizadeh, Taher , Dinarvand, Rassoul , Ganjali, Mohammed M , Walker, Roderick B
- Date: 2009
- Language: English
- Type: Article
- Identifier: vital:6410 , http://hdl.handle.net/10962/d1006496
- Description: A highly selective methacrylic based molecularly imprinted polymer (MIP) was synthesized and applied for the separation and the pre-concentration of salbutamol in urine samples. Spectrophotometric determination of salbutamol was achieved using 2,6-dichloroquinone chlorimide as colorimetric reagent. The detection limit of the method was ca. 13 ng/mL in urine after pre-concentration of the samples by MIP-SPE andanalysis with an optimized and sensitive spectrophotometric method. The linear dynamic range for salbutamol determination in urine was 0.04-0.75 μg mL-1. The recovery for the affinity based solid-phase extraction (SPE) with the MIP was more than 96 %.
- Full Text:
- Date Issued: 2009
Study of the formation of artifacts following Dichloromethane reaction with some nitrogenous drugs
- Authors: Mohammadi, Ali , Amini, Mohsen , Hamedani, Moteza P , Torkabadi, Hossein H , Walker, Roderick B
- Date: 2008
- Language: English
- Type: Article
- Identifier: vital:6409 , http://hdl.handle.net/10962/d1006495
- Description: In this work, the quaternization reaction of some nitrogenous drugs in dichloromethane under stress condition and room temperature at different times are studied. Under these conditions, drug-chloromethochloride adducts or artifacts were found to be formed for clozapine, ofloxacin and olanzapine. The structures of the resultant adducts were elucidated using 1H NMR spectroscopy. In addition, the amount of intact drug was determined using in-house validated HPLC methods with UV detection.
- Full Text:
- Date Issued: 2008
A stability-indicating high performance liquid chromatographic (HPLC) assay for the simultaneous determination of atorvastatin and amlodipine in commercial tablets
- Authors: Mohammadi, Ali , Rezanour, N , Ansari Dogaheh, M , Ghorbani Bidkorbeh, F , Hashem, M , Walker, Roderick B
- Date: 2007
- Language: English
- Type: Article
- Identifier: vital:6403 , http://hdl.handle.net/10962/d1006340
- Description: A simple, rapid, precise and accurate isocratic reversed-phase stability-indicating HPLC method was developed and validated for the simultaneous determination of atorvastatin (AT) and amlodipine (AM) in commercial tablets. The method has shown adequate separation for AM, AT from their associated main impurities and their degradation products. Separation was achieved on a Perfectsil® Target ODS-3, 5 μm, 250 mm × 4.6 mm i.d. column using a mobile phase consisting of acetonitrile–0.025 M NaH2PO4 buffer (pH 4.5) (55:45, v/v) at a flow rate of 1 ml/min and UV detection at 237 nm. The drugs were subjected to oxidation, hydrolysis, photolysis and heat to apply stress conditions. The linearity of the proposed method was investigated in the range of 2–30 μg/ml (r = 0.9994) for AT and 1–20 μg/ml (r = 0.9993) for AM. The limits of detection were 0.65 μg/ml and 0.35 μg/ml for AT and AM, respectively. The limits of quantitation were 2 μg/ml and 1 μg/ml for AT and AM, respectively. Degradation products produced as a result of stress studies did not interfere with the detection of AT and AM and the assay can thus be considered stability-indicating.
- Full Text:
- Date Issued: 2007
A stability-indicating high performance liquid chromatographic assay for the determination of orlistat in capsules
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, I , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article , text
- Identifier: vital:6407 , http://hdl.handle.net/10962/d1006480
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 µm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
A stability-indicating high performance liquid chromatographic assay for the determination of orlistat in capsules
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, Nasrin , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184267 , vital:44195 , xlink:href="https://doi.org/10.1016/j.chroma.2006.03.038"
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 μm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
An LC-MS-MS method for the determination of cyclizine in human serum
- Authors: Mohammadi, Ali , Kanfer, Isadore , Sewram, V , Walker, Roderick B
- Date: 2005
- Language: English
- Type: Article
- Identifier: vital:6408 , http://hdl.handle.net/10962/d1006481
- Description: Cyclizine is a piperazine derivative with anti-emetic activity that is useful in the prevention and treatment of nausea and vomiting associated with motion sickness. A liquid chromatography-tandem mass spectrometry (LC-MS-MS) method is presented for the quantitation of cyclizine in serum. Sample pretreatment involved liquid-liquid extraction of 200 μl of serum with dichloromethane after the addition of 100 μl each of ammonium hydroxide and internal standard solutions. The extracts were analyzed by HPLC on a Luna ® C18 reversed-phase column and an ion-trap mass spectrometer with an electrospray interface. A limit of detection of 1 ng/ml was determined which allowed for the reliable measurement of cyclizine in the serum of human subjects. The method was found to be linear over the calibration range of 2.5-100 ng/ml. The applicability of this method was demonstrated by the analysis of serum obtained from a human volunteer following administration of a single 50 mg cyclizine hydrochloride tablet. The reported method was observed to have the necessary sensitivity, selectivity, precision and accuracy for monitoring cyclizine concentrations in human subjects following oral administration.
- Full Text:
- Date Issued: 2005