Nanoconjugates of CdTe@ ZnS quantum dots with cobalt tetraamino-phthalocyanine
- Adegoke, Oluwasesan, Antunes, Edith M, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242049 , vital:50996 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.02.010"
- Description: The covalent linking of thiol-capped CdTe@ZnS QDs with cobalt tetraamino-phthalocyanine (CoTAPc) has been successfully carried out. Several techniques such as time-resolved fluorescence measurements, thermal gravimetric analysis,transmissionelectronmicroscopy andspectrophotometric techniques were employed to characterize the nanoconjugates. Covalent binding of the QDs with CoTAPc resulted in the fluorescence quenching of the former. In the presence of varying concentrations of superoxide anion (O2 •−), the fluorescence of the QDs in the conjugate was gradually enhanced and the detection limits obtained were 2.1 and 2.4 nM for the smaller and larger QDs, respectively. Based on the excellent selectivity displayed by the nanoconjugates towards O2 •− over other biologically active species, a potential nanosensor was developed.
- Full Text:
- Date Issued: 2013
- Authors: Adegoke, Oluwasesan , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242049 , vital:50996 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.02.010"
- Description: The covalent linking of thiol-capped CdTe@ZnS QDs with cobalt tetraamino-phthalocyanine (CoTAPc) has been successfully carried out. Several techniques such as time-resolved fluorescence measurements, thermal gravimetric analysis,transmissionelectronmicroscopy andspectrophotometric techniques were employed to characterize the nanoconjugates. Covalent binding of the QDs with CoTAPc resulted in the fluorescence quenching of the former. In the presence of varying concentrations of superoxide anion (O2 •−), the fluorescence of the QDs in the conjugate was gradually enhanced and the detection limits obtained were 2.1 and 2.4 nM for the smaller and larger QDs, respectively. Based on the excellent selectivity displayed by the nanoconjugates towards O2 •− over other biologically active species, a potential nanosensor was developed.
- Full Text:
- Date Issued: 2013
Fluorescence “switch on” of conjugates of CdTe@ ZnS quantum dots with Al, Ni and Zn tetraamino-phthalocyanines by hydrogen peroxide
- Adegoke, Oluwasesan, Khene, Samson M, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Khene, Samson M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241750 , vital:50966 , xlink:href="https://doi.org/10.1007/s10895-013-1222-x"
- Description: In this study, we have developed a novel nanoprobe for H2O2 based on the conjugation of CdTe@ZnS quantum dots (QDs) to different metal tetraamino-phthalocyanine (MTAPc): (M = (OAc)Al, {OAc = acetate}, Ni and Zn). Chemical coordination of the QDs to the MTAPc resulted in the fluorescence “switch off” of the linked QDs which was associated with Förster resonance energy transfer (FRET). In the presence of varying concentration of H2O2, the fluorescence of the linked QDs was progressively “switched on” and the FRET mechanism between the QDs and the MTAPc was disrupted. The sensitivity/limit of detection of the nanoprobe followed the order: QDs-ZnTAPc (2.2 μM) > QDs-NiTAPc (4.4 μM) > QDs-AlTAPc (9.8 μM) while the selectivity followed the order: QDs-NiTAPc > QDs-AlTAPc > QDs-ZnTAPc. The varying degree of sensitivity/selectivity and mechanism of detection is discussed in detail.
- Full Text:
- Date Issued: 2013
- Authors: Adegoke, Oluwasesan , Khene, Samson M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241750 , vital:50966 , xlink:href="https://doi.org/10.1007/s10895-013-1222-x"
- Description: In this study, we have developed a novel nanoprobe for H2O2 based on the conjugation of CdTe@ZnS quantum dots (QDs) to different metal tetraamino-phthalocyanine (MTAPc): (M = (OAc)Al, {OAc = acetate}, Ni and Zn). Chemical coordination of the QDs to the MTAPc resulted in the fluorescence “switch off” of the linked QDs which was associated with Förster resonance energy transfer (FRET). In the presence of varying concentration of H2O2, the fluorescence of the linked QDs was progressively “switched on” and the FRET mechanism between the QDs and the MTAPc was disrupted. The sensitivity/limit of detection of the nanoprobe followed the order: QDs-ZnTAPc (2.2 μM) > QDs-NiTAPc (4.4 μM) > QDs-AlTAPc (9.8 μM) while the selectivity followed the order: QDs-NiTAPc > QDs-AlTAPc > QDs-ZnTAPc. The varying degree of sensitivity/selectivity and mechanism of detection is discussed in detail.
- Full Text:
- Date Issued: 2013
CdTe quantum dots functionalized with 4-amino-2, 2, 6, 6-tetramethylpiperidine-N-oxide as luminescent nanoprobe for the sensitive recognition of bromide ion
- Adegoke, Oluwasesan, Hosten, Eric, McCleland, Cedric, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Hosten, Eric , McCleland, Cedric , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244393 , vital:51253 , xlink:href="https://doi.org/10.1016/j.aca.2012.01.040"
- Description: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.
- Full Text:
- Date Issued: 2012
- Authors: Adegoke, Oluwasesan , Hosten, Eric , McCleland, Cedric , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244393 , vital:51253 , xlink:href="https://doi.org/10.1016/j.aca.2012.01.040"
- Description: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.
- Full Text:
- Date Issued: 2012
Conjugation of mono-substituted phthalocyanine derivatives to CdSe@ ZnS quantum dots and their applications as fluorescent-based sensors
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189842 , vital:44936 , xlink:href="https://doi.org/10.1016/j.synthmet.2013.11.016"
- Description: Unsymmetrically substituted derivatives of aluminium amino phthalocyanines were synthesized for the first time, fully characterized and conjugated to CdSe@ZnS quantum dots (QDs). The conjugates were employed as fluorescence-based sensors for anion sensing. Among the anions that enhanced the fluorescence of the probe, fluoride ion was chosen as the test ion to test the efficacy of the probe. Förster resonance energy transfer from the QDs to the phthalocyanine was observed as an indication for the fluorescence quenching of the QDs upon binding to the phthalocyanine. The fluorescence of the linked QDs was progressively enhanced, and linearly proportional to increasing concentrations of fluoride ion. The type of substituent attached to the phthalocyanine ring influenced the efficiency of fluorescence enhancement. The proposed nanoprobe has been employed to detect fluoride ion in cell culture medium and tap water.
- Full Text:
- Date Issued: 2014
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189842 , vital:44936 , xlink:href="https://doi.org/10.1016/j.synthmet.2013.11.016"
- Description: Unsymmetrically substituted derivatives of aluminium amino phthalocyanines were synthesized for the first time, fully characterized and conjugated to CdSe@ZnS quantum dots (QDs). The conjugates were employed as fluorescence-based sensors for anion sensing. Among the anions that enhanced the fluorescence of the probe, fluoride ion was chosen as the test ion to test the efficacy of the probe. Förster resonance energy transfer from the QDs to the phthalocyanine was observed as an indication for the fluorescence quenching of the QDs upon binding to the phthalocyanine. The fluorescence of the linked QDs was progressively enhanced, and linearly proportional to increasing concentrations of fluoride ion. The type of substituent attached to the phthalocyanine ring influenced the efficiency of fluorescence enhancement. The proposed nanoprobe has been employed to detect fluoride ion in cell culture medium and tap water.
- Full Text:
- Date Issued: 2014
Effects of analytes on the fluorescence properties of CdTe@ ZnS quantum dots decorated with cobalt tetraamino-phthalocyanine
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189829 , vital:44935 , xlink:href="https://doi.org/10.1016/j.jlumin.2013.09.079"
- Description: In this work, we have carried out an investigation on the effects of different biologically active analytes on the fluorescence response of glutathione-capped CdTe@ZnS quantum dots (QDs)-colbalt tetraamino-phthalocyanine nanoconjugate system. Firstly, fluorescence quenching occurred. Experimental results showed that some analytes either “turned on”, others further quenched or showed no effect on the fluorescence emission of the nanoprobe.
- Full Text:
- Date Issued: 2014
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189829 , vital:44935 , xlink:href="https://doi.org/10.1016/j.jlumin.2013.09.079"
- Description: In this work, we have carried out an investigation on the effects of different biologically active analytes on the fluorescence response of glutathione-capped CdTe@ZnS quantum dots (QDs)-colbalt tetraamino-phthalocyanine nanoconjugate system. Firstly, fluorescence quenching occurred. Experimental results showed that some analytes either “turned on”, others further quenched or showed no effect on the fluorescence emission of the nanoprobe.
- Full Text:
- Date Issued: 2014
Unsymmetrically substituted nickel triazatetra-benzcorrole and phthalocynanine complexes
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189818 , vital:44934 , xlink:href="https://doi.org/10.1007/s10895-013-1317-4"
- Description: We report on the design and application of fluorescent nanoprobes based on the covalent linking of L-glutathione-capped CdSe@ZnS quantum dots (QDs) to newly synthesized unsymmetrically substituted nickel mercaptosuccinic acid triazatetra-benzcorrole (3) and phthalocyanine (4) complexes. Fluorescence quenching of the QDs occurred on conjugation to complexes 3 or 4. The nanoprobes were selectively screened in the presence of different cations and Hg2+ showed excellent affinity in “turning ON” the fluorescence of the nanoprobes. Experimental results showed that the sensitivity of QDs-4 towards Hg2+ was much higher than that of QDs-3 nanoprobe. The mechanism of reaction has been elucidated based on the ability of Hg2+ to coordinate with the sulphur atom of the Ni complex ring and apparently “turn ON” the fluorescence of the linked QDs.
- Full Text:
- Date Issued: 2014
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189818 , vital:44934 , xlink:href="https://doi.org/10.1007/s10895-013-1317-4"
- Description: We report on the design and application of fluorescent nanoprobes based on the covalent linking of L-glutathione-capped CdSe@ZnS quantum dots (QDs) to newly synthesized unsymmetrically substituted nickel mercaptosuccinic acid triazatetra-benzcorrole (3) and phthalocyanine (4) complexes. Fluorescence quenching of the QDs occurred on conjugation to complexes 3 or 4. The nanoprobes were selectively screened in the presence of different cations and Hg2+ showed excellent affinity in “turning ON” the fluorescence of the nanoprobes. Experimental results showed that the sensitivity of QDs-4 towards Hg2+ was much higher than that of QDs-3 nanoprobe. The mechanism of reaction has been elucidated based on the ability of Hg2+ to coordinate with the sulphur atom of the Ni complex ring and apparently “turn ON” the fluorescence of the linked QDs.
- Full Text:
- Date Issued: 2014
Structural and optical properties of alloyed quaternary CdSeTeS core and CdSeTeS/ZnS core–shell quantum dots
- Adegoke, Oluwasesan, Nyokong, Tebello, Forbes, Patricia B C
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193575 , vital:45349 , xlink:href="https://doi.org/10.1016/j.jallcom.2015.05.083"
- Description: Synthesis of fluorescent alloyed quantum dots (QDs) with unique optical properties suitable for a wide array of chemical, physical and biological applications is of research interest. In this work, highly luminescent and photostable alloyed quaternary CdSeTeS core QDs of two different sizes were fabricated via the organometallic hot-injection synthetic route. Characterization of the nanocrystals were performed using TEM, XRD, UV/vis and fluorescence spectrophotometric techniques. We have demonstrated in this work that the well fabricated alloyed quaternary CdSeTeS core QDs possess unique optical properties that are advantageous over conventional core/shell systems. Formation of the CdSeTeS/ZnS core/shell with the desired optical properties comes with a number of challenges, hence the advantages of the quaternary alloyed core over the core/shell QDs are (i) avoidance of the challenging process of determining the proper shell thickness which can provide the desired optical properties in the core/shell system and (ii) avoidance of the lattice-induced mismatch between the core and the shell material which can either lead to incomplete exciton confinement or dislocation at the core/shell interface.
- Full Text:
- Date Issued: 2015
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193575 , vital:45349 , xlink:href="https://doi.org/10.1016/j.jallcom.2015.05.083"
- Description: Synthesis of fluorescent alloyed quantum dots (QDs) with unique optical properties suitable for a wide array of chemical, physical and biological applications is of research interest. In this work, highly luminescent and photostable alloyed quaternary CdSeTeS core QDs of two different sizes were fabricated via the organometallic hot-injection synthetic route. Characterization of the nanocrystals were performed using TEM, XRD, UV/vis and fluorescence spectrophotometric techniques. We have demonstrated in this work that the well fabricated alloyed quaternary CdSeTeS core QDs possess unique optical properties that are advantageous over conventional core/shell systems. Formation of the CdSeTeS/ZnS core/shell with the desired optical properties comes with a number of challenges, hence the advantages of the quaternary alloyed core over the core/shell QDs are (i) avoidance of the challenging process of determining the proper shell thickness which can provide the desired optical properties in the core/shell system and (ii) avoidance of the lattice-induced mismatch between the core and the shell material which can either lead to incomplete exciton confinement or dislocation at the core/shell interface.
- Full Text:
- Date Issued: 2015
Photophysical properties of a series of alloyed and non-alloyed water-soluble l-cysteine-capped core quantum dots
- Adegoke, Oluwasesan, Nyokong, Tebello, Forbes, Patricia B
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello , Forbes, Patricia B
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188486 , vital:44758 , xlink:href="https://doi.org/10.1016/j.jallcom.2016.10.276"
- Description: Photophysical properties of quantum dots (QDs) such as their photoluminescence (PL) quantum yield (QY), exciton lifetime and PL stability are important parameters used to unravel their chemical and physical characteristics. In this work, we have comparatively investigated the photophysical properties of a series of L-cysteine-capped non-alloyed (CdTe and CdSe) and alloyed (CdZnTe, CdSeS, CdSeTe and CdSeTeS) core QDs. Each of the QDs varied in their size and PL emission wavelength. We observe no physical relationship between the PL QY of the QDs and their PL stability. Based on the PL stability assessment, CdTe QDs with a high PL QY value of 88% exhibited poor PL stability while moderate PL stability was observed for CdZnTe (QY = 78%); CdSe (QY = 3%); and CdSeTe QDs (QY = ∼3%). Alloyed CdSeS (QY = ∼69%) and CdSeTeS (QY = 23%) QDs exhibited good PL stability and can serve as potential fluorophores for a wide range of chemical and biological applications. Generally, it is proposed that the structural nature of the QDs played a significant role in their overall photophysical properties. The information provided in this work will assist in the selection of core QDs suitable for different applications.
- Full Text:
- Date Issued: 2017
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello , Forbes, Patricia B
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188486 , vital:44758 , xlink:href="https://doi.org/10.1016/j.jallcom.2016.10.276"
- Description: Photophysical properties of quantum dots (QDs) such as their photoluminescence (PL) quantum yield (QY), exciton lifetime and PL stability are important parameters used to unravel their chemical and physical characteristics. In this work, we have comparatively investigated the photophysical properties of a series of L-cysteine-capped non-alloyed (CdTe and CdSe) and alloyed (CdZnTe, CdSeS, CdSeTe and CdSeTeS) core QDs. Each of the QDs varied in their size and PL emission wavelength. We observe no physical relationship between the PL QY of the QDs and their PL stability. Based on the PL stability assessment, CdTe QDs with a high PL QY value of 88% exhibited poor PL stability while moderate PL stability was observed for CdZnTe (QY = 78%); CdSe (QY = 3%); and CdSeTe QDs (QY = ∼3%). Alloyed CdSeS (QY = ∼69%) and CdSeTeS (QY = 23%) QDs exhibited good PL stability and can serve as potential fluorophores for a wide range of chemical and biological applications. Generally, it is proposed that the structural nature of the QDs played a significant role in their overall photophysical properties. The information provided in this work will assist in the selection of core QDs suitable for different applications.
- Full Text:
- Date Issued: 2017
Interaction of CdTe quantum dots with 2, 2-diphenyl-1-picrylhydrazyl free radical
- Adegoke, Oluwasesan, Chidawanyika, Wadzanai J U, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/245751 , vital:51402 , xlink:href="https://doi.org/10.1007/s10895-011-1012-2"
- Description: The interaction of 2,2-diphenyl-1-picrylhydrazyl (DPPH●) free radical with thiol-capped CdTe quantum dots (QDs) has been studied by UV–vis spectroscopy, steady state and time resolved fluorescence measurements. Addition of DPPH● radical to CdTe QDs resulted in fluorescence quenching. The interaction occurs through static quenching as this was confirmed by fluorescence lifetime measurements. Time course absorption studies indicates that DPPH● may be reduced by interaction with QDs to the substituted hydrazine form (2,2-diphenyl-1-picrylhydrazine) DPPH-H. The mechanism of fluorescence quenching of CdTe QDs by DPPH● is proposed.
- Full Text:
- Date Issued: 2012
- Authors: Adegoke, Oluwasesan , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/245751 , vital:51402 , xlink:href="https://doi.org/10.1007/s10895-011-1012-2"
- Description: The interaction of 2,2-diphenyl-1-picrylhydrazyl (DPPH●) free radical with thiol-capped CdTe quantum dots (QDs) has been studied by UV–vis spectroscopy, steady state and time resolved fluorescence measurements. Addition of DPPH● radical to CdTe QDs resulted in fluorescence quenching. The interaction occurs through static quenching as this was confirmed by fluorescence lifetime measurements. Time course absorption studies indicates that DPPH● may be reduced by interaction with QDs to the substituted hydrazine form (2,2-diphenyl-1-picrylhydrazine) DPPH-H. The mechanism of fluorescence quenching of CdTe QDs by DPPH● is proposed.
- Full Text:
- Date Issued: 2012
Nanohybrid electrocatalyst based on cobalt phthalocyanine-carbon nanotube-reduced graphene oxide for ultrasensitive detection of glucose in human saliva
- Adeniyi, Omotayo, Nwahara, Nnamdi, Mwanza, Daniel, Nyokong, Tebello, Mashazi, Philani N
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
- Date Issued: 2021
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
- Date Issued: 2021
A highly selective and sensitive pyridylazo-2-naphthol-poly (acrylic acid) functionalized electrospun nanofiber fluorescence “turn-off” chemosensory system for Ni 2+
- Adewuyi, Sheriff, Ondigo, Dezzline A, Zugle, Ruphino, Tshentu, Zenixole, Nyokong, Tebello, Torto, Nelson
- Authors: Adewuyi, Sheriff , Ondigo, Dezzline A , Zugle, Ruphino , Tshentu, Zenixole , Nyokong, Tebello , Torto, Nelson
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246012 , vital:51428 , xlink:href="https://doi.org/10.1039/C2AY25182E"
- Description: A fluorescent nanofiber probe for the determination of Ni2+ was developed via the electrospinning of a covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymer. Fluorescent nanofibers with diameters in the range 230–800 nm were produced with uniformly dispersed fluorophores. The excitation and emission fluorescence were at wavelengths 479 and 557 nm respectively, thereby exhibiting a good Stokes' shift. This Ni2+ probe that employs fluorescence quenching in a solid receptor–fluorophore system exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 μg mL−1 based on the Stern–Volmer mechanism. The probe achieved a detection limit (3δ/S) of 0.07 ng mL−1 and a precision, calculated as a relative standard deviation (RSD) of more than 4% (n = 8). The concentration of Ni2+ in a certified reference material (SEP-3) was found to be 0.8986 μg mL−1, which is significantly comparable with the certified value of 0.8980 μg mL−1. The accuracy of the determinations, expressed as a relative error between the certified and the observed values of certified reference groundwater was ≤0.1%. The versatility of the nanofiber probe was demonstrated by affording simple, rapid and selective detection of Ni2+ in the presence of other competing metal ions by direct analysis, without employing any further sample handling steps.
- Full Text:
- Date Issued: 2012
- Authors: Adewuyi, Sheriff , Ondigo, Dezzline A , Zugle, Ruphino , Tshentu, Zenixole , Nyokong, Tebello , Torto, Nelson
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246012 , vital:51428 , xlink:href="https://doi.org/10.1039/C2AY25182E"
- Description: A fluorescent nanofiber probe for the determination of Ni2+ was developed via the electrospinning of a covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymer. Fluorescent nanofibers with diameters in the range 230–800 nm were produced with uniformly dispersed fluorophores. The excitation and emission fluorescence were at wavelengths 479 and 557 nm respectively, thereby exhibiting a good Stokes' shift. This Ni2+ probe that employs fluorescence quenching in a solid receptor–fluorophore system exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 μg mL−1 based on the Stern–Volmer mechanism. The probe achieved a detection limit (3δ/S) of 0.07 ng mL−1 and a precision, calculated as a relative standard deviation (RSD) of more than 4% (n = 8). The concentration of Ni2+ in a certified reference material (SEP-3) was found to be 0.8986 μg mL−1, which is significantly comparable with the certified value of 0.8980 μg mL−1. The accuracy of the determinations, expressed as a relative error between the certified and the observed values of certified reference groundwater was ≤0.1%. The versatility of the nanofiber probe was demonstrated by affording simple, rapid and selective detection of Ni2+ in the presence of other competing metal ions by direct analysis, without employing any further sample handling steps.
- Full Text:
- Date Issued: 2012
Understanding foraging practices in Lagos metropolis to redesign urban greenspaces in support of human-nature interactions
- Adeyemi, Opeyemi, Shackleton, Charlie M
- Authors: Adeyemi, Opeyemi , Shackleton, Charlie M
- Date: 2023
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/401353 , vital:69728 , xlink:href="https://doi.org/10.1016/j.ufug.2022.127805"
- Description: Enhancing knowledge of urban foraging across different urban landscapes is an urgent matter given that about two-thirds of the world’s population is projected to live in urban areas by 2050, whilst 50 % of Africa’s population is expected to live in cities by 2030. This study was conducted in Lagos metropolis which is the economic hub of Africa’s most populous country. Data was collected using an in-person, semi-structured questionnaire from 347 persons who were 18 years or older to identify foragers and non-foragers, their sociodemographic profiles, and their foraging practices. Results revealed that about two out of three persons sampled forage to some degree. The collection happened more in domestic gardens (34 %) and streets (27 %) than in other foraging sites (such as unused lands, institutional grounds and lakes and riparian fringes). A total of 35 species were reportedly foraged within the metropolis, mostly for food (71 %) and medicine (26 %). Mango (Mangifera indica), pawpaw (Carica papaya), tropical almond (Terminalia catappa), fish (various species), bitter leaf (Vernonia amygdalina) and spinach (Spinacia oleracea) were the most gathered species. The distance travelled to foraging wild species ranged from 5 m to 25 km. The primary motivation for foraging was the acquisition of fresh and natural materials. However, some felt that foraging was a stressful activity. The unavailability of foraging sites and species was the major constraint to foraging in this megacity. Hence, efforts to increase the edible components of public green spaces and to provide free access could potentially allow more people to forage and make current foraging more secure. We suggest that making provisions for foraging in urban planning goals could contribute to the sustainable development of cities in Africa and elsewhere.
- Full Text:
- Date Issued: 2023
- Authors: Adeyemi, Opeyemi , Shackleton, Charlie M
- Date: 2023
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/401353 , vital:69728 , xlink:href="https://doi.org/10.1016/j.ufug.2022.127805"
- Description: Enhancing knowledge of urban foraging across different urban landscapes is an urgent matter given that about two-thirds of the world’s population is projected to live in urban areas by 2050, whilst 50 % of Africa’s population is expected to live in cities by 2030. This study was conducted in Lagos metropolis which is the economic hub of Africa’s most populous country. Data was collected using an in-person, semi-structured questionnaire from 347 persons who were 18 years or older to identify foragers and non-foragers, their sociodemographic profiles, and their foraging practices. Results revealed that about two out of three persons sampled forage to some degree. The collection happened more in domestic gardens (34 %) and streets (27 %) than in other foraging sites (such as unused lands, institutional grounds and lakes and riparian fringes). A total of 35 species were reportedly foraged within the metropolis, mostly for food (71 %) and medicine (26 %). Mango (Mangifera indica), pawpaw (Carica papaya), tropical almond (Terminalia catappa), fish (various species), bitter leaf (Vernonia amygdalina) and spinach (Spinacia oleracea) were the most gathered species. The distance travelled to foraging wild species ranged from 5 m to 25 km. The primary motivation for foraging was the acquisition of fresh and natural materials. However, some felt that foraging was a stressful activity. The unavailability of foraging sites and species was the major constraint to foraging in this megacity. Hence, efforts to increase the edible components of public green spaces and to provide free access could potentially allow more people to forage and make current foraging more secure. We suggest that making provisions for foraging in urban planning goals could contribute to the sustainable development of cities in Africa and elsewhere.
- Full Text:
- Date Issued: 2023
Antiplasmodial Activity of the n-Hexane Extract from Pleurotus ostreatus (Jacq. ex. Fr) P. Kumm
- Afieroho, Ozadheoghene E, Siwe-Noundou, Xavier, Onyia, Chiazor P, Festus, Osamuyi H, Chukwu, Elizabeth C, Adedokun, Olutayo M, Isaacs, Michelle, Hoppe, Heinrich, Krause, Rui W M, Abo, Kio A
- Authors: Afieroho, Ozadheoghene E , Siwe-Noundou, Xavier , Onyia, Chiazor P , Festus, Osamuyi H , Chukwu, Elizabeth C , Adedokun, Olutayo M , Isaacs, Michelle , Hoppe, Heinrich , Krause, Rui W M , Abo, Kio A
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/194981 , vital:45516 , xlink:href="https://doi.org/10.4274/tjps.18894"
- Description: Objectives: Several mushrooms species have been reported to be nematophagous and antiprotozoan. This study reported the antiplasmodial and cytotoxic properties of the n-hexane extract from the edible mushroom Pleurotus ostreatus and the isolation of a sterol from the extract. Materials and Methods: Antiplasmodial and cytotoxicity assays were done in vitro using the plasmodium lactate dehydrogenase assay and human HeLa cervical cell lines, respectively. The structure of the isolated compound from the n-hexane extract was elucidated using spectroscopic techniques. Results: The n-hexane extract (yield: 0.93% w/w) showed dose dependent antiplasmodial activity with the trend in parasite inhibition of: chloroquine (IC50=0.016 μg/mL) > n-hexane extract (IC50=25.18 μg/mL). It also showed mild cytotoxicity (IC50>100 μg/mL; selectivity index >4) compared to the reference drug emetine (IC50=0.013 μg/mL). The known sterol, ergostan-5,7,22-trien-3-ol, was isolated and characterized from the extract. Conclusion: This study reporting for the first time the antiplasmodial activity of P. ostreatus revealed its nutraceutical potential in the management of malaria.
- Full Text:
- Date Issued: 2019
- Authors: Afieroho, Ozadheoghene E , Siwe-Noundou, Xavier , Onyia, Chiazor P , Festus, Osamuyi H , Chukwu, Elizabeth C , Adedokun, Olutayo M , Isaacs, Michelle , Hoppe, Heinrich , Krause, Rui W M , Abo, Kio A
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/194981 , vital:45516 , xlink:href="https://doi.org/10.4274/tjps.18894"
- Description: Objectives: Several mushrooms species have been reported to be nematophagous and antiprotozoan. This study reported the antiplasmodial and cytotoxic properties of the n-hexane extract from the edible mushroom Pleurotus ostreatus and the isolation of a sterol from the extract. Materials and Methods: Antiplasmodial and cytotoxicity assays were done in vitro using the plasmodium lactate dehydrogenase assay and human HeLa cervical cell lines, respectively. The structure of the isolated compound from the n-hexane extract was elucidated using spectroscopic techniques. Results: The n-hexane extract (yield: 0.93% w/w) showed dose dependent antiplasmodial activity with the trend in parasite inhibition of: chloroquine (IC50=0.016 μg/mL) > n-hexane extract (IC50=25.18 μg/mL). It also showed mild cytotoxicity (IC50>100 μg/mL; selectivity index >4) compared to the reference drug emetine (IC50=0.013 μg/mL). The known sterol, ergostan-5,7,22-trien-3-ol, was isolated and characterized from the extract. Conclusion: This study reporting for the first time the antiplasmodial activity of P. ostreatus revealed its nutraceutical potential in the management of malaria.
- Full Text:
- Date Issued: 2019
Mainstreaming education for sustainable development: Elaborating the role of position-practice systems using seven laminations of scale
- Agbedahin, Adesuwa V, Lotz-Sisitka, Heila
- Authors: Agbedahin, Adesuwa V , Lotz-Sisitka, Heila
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/182428 , vital:43829 , xlink:href="https://doi.org/10.1080/14767430.2019.1602975"
- Description: The United Nations Sustainable Development Goal 4.7 proposes that Education for Sustainable Development (ESD) should be included at all levels of education, known as ‘mainstreaming’. However, there is little guidance as to how to achieve this. ESD mainstreaming demands more than simply a technical policy transfer; it also requires attention to the position-practice systems of involved agents. This article critically assesses the mainstreaming of ESD in the case of university educators in Africa who have participated in the International Training Programme on ESD in higher education. It clarifies their position-practice systems in terms of Bhaskar’s seven laminations of scale. This article therefore provides a detailed description of the ways in which agents' position-practice systems enable and constrain ESD mainstreaming. It also demonstrates that a critical realist perspective can contribute towards the understanding and achievement of transformation towards sustainability and can help to ensure the flourishing of both current and future generations.
- Full Text:
- Date Issued: 2019
- Authors: Agbedahin, Adesuwa V , Lotz-Sisitka, Heila
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/182428 , vital:43829 , xlink:href="https://doi.org/10.1080/14767430.2019.1602975"
- Description: The United Nations Sustainable Development Goal 4.7 proposes that Education for Sustainable Development (ESD) should be included at all levels of education, known as ‘mainstreaming’. However, there is little guidance as to how to achieve this. ESD mainstreaming demands more than simply a technical policy transfer; it also requires attention to the position-practice systems of involved agents. This article critically assesses the mainstreaming of ESD in the case of university educators in Africa who have participated in the International Training Programme on ESD in higher education. It clarifies their position-practice systems in terms of Bhaskar’s seven laminations of scale. This article therefore provides a detailed description of the ways in which agents' position-practice systems enable and constrain ESD mainstreaming. It also demonstrates that a critical realist perspective can contribute towards the understanding and achievement of transformation towards sustainability and can help to ensure the flourishing of both current and future generations.
- Full Text:
- Date Issued: 2019
Voltammetric characterisation of the self-assembled monolayers (SAMs) of benzyl-and dodecyl-mercapto tetra substituted metallophthalocyanines complexes
- Agboola, Bolade, Westbroek, Philippe, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade , Westbroek, Philippe , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281414 , vital:55723 , xlink:href="https://doi.org/10.1016/j.elecom.2006.08.047"
- Description: Voltammetric characterisations of cobalt, iron, manganese, nickel and zinc phthalocyanine complexes tetra substituted with benzyl- and dodecyl-mercapto ring substituents and immobilisation on gold electrodes via the self-assembling technique are presented. The self-assembled films are stable and showed blocking characteristics towards the following Faradaic processes; gold surface oxidation, under potential deposition of copper and solution redox chemistry of [Fe(H2O)6 3+ ]/[Fe(H2O)6 2+ ]. The solution chemistry of [Fe(CN)6]−3/[Fe(CN)6]−4 redox process was used to study the orientation of the CoPcs-SAMs and this revealed a possible deviation from flat orientation of the complexes on the gold electrodes when the SAM formation times were greater than 24 h. For SAM formation time at 24 and 48 h, CoTDMPc-SAM showed more inhibition of the [Fe(CN)6]−3/[Fe(CN)6]−4 redox process than the CoTBMPc-SAM counterpart, indicating more blocking characteristics of the dodecylmercapto ring substituents compared to the benzylmercapto counterpart. To avoid SAM desorption, the potential application should be limited to −0.2 to +0.8 V vs. Ag∣AgCl (NaCl, sat’d) in acidic and neutral pH.
- Full Text:
- Date Issued: 2007
- Authors: Agboola, Bolade , Westbroek, Philippe , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281414 , vital:55723 , xlink:href="https://doi.org/10.1016/j.elecom.2006.08.047"
- Description: Voltammetric characterisations of cobalt, iron, manganese, nickel and zinc phthalocyanine complexes tetra substituted with benzyl- and dodecyl-mercapto ring substituents and immobilisation on gold electrodes via the self-assembling technique are presented. The self-assembled films are stable and showed blocking characteristics towards the following Faradaic processes; gold surface oxidation, under potential deposition of copper and solution redox chemistry of [Fe(H2O)6 3+ ]/[Fe(H2O)6 2+ ]. The solution chemistry of [Fe(CN)6]−3/[Fe(CN)6]−4 redox process was used to study the orientation of the CoPcs-SAMs and this revealed a possible deviation from flat orientation of the complexes on the gold electrodes when the SAM formation times were greater than 24 h. For SAM formation time at 24 and 48 h, CoTDMPc-SAM showed more inhibition of the [Fe(CN)6]−3/[Fe(CN)6]−4 redox process than the CoTBMPc-SAM counterpart, indicating more blocking characteristics of the dodecylmercapto ring substituents compared to the benzylmercapto counterpart. To avoid SAM desorption, the potential application should be limited to −0.2 to +0.8 V vs. Ag∣AgCl (NaCl, sat’d) in acidic and neutral pH.
- Full Text:
- Date Issued: 2007
Comparative electrooxidation of nitrite by electrodeposited Co (II), Fe (II) and Mn (III) tetrakis (benzylmercapto) and tetrakis (dodecylmercapto) phthalocyanines on gold electrodes
- Agboola, Bolade, Nyokong, Tebello
- Authors: Agboola, Bolade , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281212 , vital:55702 , xlink:href="https://doi.org/10.1016/j.aca.2007.01.031"
- Description: This work reports on the electrooxidation of nitrite using Co(II), Fe(II) and Mn(III) tetrakis (benzylmercapto) and tetrakis (dodecylmercapto) phthalocyanines electrodeposited onto a gold electrode. Good catalytic activity (in terms of lowering overpotential) was obtained for these molecules when compared to previously reported MPc catalysts. The catalytic current was found to vary linearly with nitrite concentration in the range employed in this work (0.1–1 mM) and high sensitivities ranging from 6.9 to 9.9 μA mM−1 were observed for all the modified electrodes.
- Full Text:
- Date Issued: 2007
- Authors: Agboola, Bolade , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281212 , vital:55702 , xlink:href="https://doi.org/10.1016/j.aca.2007.01.031"
- Description: This work reports on the electrooxidation of nitrite using Co(II), Fe(II) and Mn(III) tetrakis (benzylmercapto) and tetrakis (dodecylmercapto) phthalocyanines electrodeposited onto a gold electrode. Good catalytic activity (in terms of lowering overpotential) was obtained for these molecules when compared to previously reported MPc catalysts. The catalytic current was found to vary linearly with nitrite concentration in the range employed in this work (0.1–1 mM) and high sensitivities ranging from 6.9 to 9.9 μA mM−1 were observed for all the modified electrodes.
- Full Text:
- Date Issued: 2007
Comparative efficiency of immobilized non-transition metal phthalocyanine photosensitizers for the visible light transformation of chlorophenols
- Agboola, Bolade, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286043 , vital:56233 , xlink:href="https://doi.org/10.1016/j.molcata.2005.12.009"
- Description: Photolysis of aqueous solutions of chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,5-trichlorophenol and pentachlorophenol) in the presence of immobilized non-transition metal phthalocyanine photosensitizers onto Amberlite® is presented. The photosensitizers studied are: Al (AlOCPc) and Zn (ZnOCPc) octacarboxyphthalocyanines; Al (AlPcS4) and Zn (ZnPcS4) tetrasulfophthalocyanines; sulfonated phthalocyanine complexes (containing mixtures of differently substituted derivatives) of Al (AlPcSmix), Zn (ZnPcSmix), Ge (GePcSmix), Si (SiPcSmix) and Sn (SnPcSmix). Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The complexes showed order of activity towards the transformation of pentachlorophenol as follows: ZnOCPc > SiPcSmix > SnPcSmix > ZnPcSmix > GePcSmix > ZnPcS4 > AlPcSmix > AlOCPc > AlPcS4. The generation of singlet oxygen (1O2) by these immobilized MPc photosensitizers was found to play a major role in their photoactivities towards the transformation of these chlorophenols. Langmuir–Hinshelwood (L–H) kinetic model studies showed that the ZnOCPc, GePcSmix and ZnPcSmix photocatalysis occurred on the catalysts surface. © 2005 Elsevier B.V. All rights reserved.
- Full Text:
- Date Issued: 2006
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286043 , vital:56233 , xlink:href="https://doi.org/10.1016/j.molcata.2005.12.009"
- Description: Photolysis of aqueous solutions of chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,5-trichlorophenol and pentachlorophenol) in the presence of immobilized non-transition metal phthalocyanine photosensitizers onto Amberlite® is presented. The photosensitizers studied are: Al (AlOCPc) and Zn (ZnOCPc) octacarboxyphthalocyanines; Al (AlPcS4) and Zn (ZnPcS4) tetrasulfophthalocyanines; sulfonated phthalocyanine complexes (containing mixtures of differently substituted derivatives) of Al (AlPcSmix), Zn (ZnPcSmix), Ge (GePcSmix), Si (SiPcSmix) and Sn (SnPcSmix). Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The complexes showed order of activity towards the transformation of pentachlorophenol as follows: ZnOCPc > SiPcSmix > SnPcSmix > ZnPcSmix > GePcSmix > ZnPcS4 > AlPcSmix > AlOCPc > AlPcS4. The generation of singlet oxygen (1O2) by these immobilized MPc photosensitizers was found to play a major role in their photoactivities towards the transformation of these chlorophenols. Langmuir–Hinshelwood (L–H) kinetic model studies showed that the ZnOCPc, GePcSmix and ZnPcSmix photocatalysis occurred on the catalysts surface. © 2005 Elsevier B.V. All rights reserved.
- Full Text:
- Date Issued: 2006
Hydrogen peroxide oxidation of 2-chlorophenol and 2, 4, 5-trichlorophenol catalyzed by monomeric and aggregated cobalt tetrasulfophthalocyanine
- Agboola, Bolade, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289249 , vital:56612 , xlink:href="https://doi.org/10.1016/j.molcata.2004.10.041"
- Description: Cobalt tetrasulfophthalocyanine (CoTSPc) was used to catalyze the oxidation of 2-chlorophenol (2-CP) and 2,4,5-trichlorophenol (TCP) using hydrogen peroxide (H2O2) as the oxidant. This CoTSPc catalyzed hydrogen peroxide oxidation of chlorophenols resulted in the formation of different types of oxidation products depending on the solvent conditions. In water/methanol conditions (where CoTSPc is mainly monomeric, and unionized forms of the phenols), phenol and hydroquinone were the main oxidation products, while in phosphate buffer solutions (pH 7 and 10 for TCP and 2-CP, respectively, where CoTSPc is mainly aggregated, and ionized forms of the phenols), benzoquinone was the main product. In contrast to CoTSPc, other MTSPc complexes studied (AlTSPc, CuTSPc and NiTSPc) exhibited no detectable catalytic effect on the oxidation of chlorophenols under the experimental conditions employed, thus proving the effect of the central metal ions on efficient catalysis of chlorophenol. Reaction pathways are proposed based on the relative time of oxidation products formation.
- Full Text:
- Date Issued: 2005
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289249 , vital:56612 , xlink:href="https://doi.org/10.1016/j.molcata.2004.10.041"
- Description: Cobalt tetrasulfophthalocyanine (CoTSPc) was used to catalyze the oxidation of 2-chlorophenol (2-CP) and 2,4,5-trichlorophenol (TCP) using hydrogen peroxide (H2O2) as the oxidant. This CoTSPc catalyzed hydrogen peroxide oxidation of chlorophenols resulted in the formation of different types of oxidation products depending on the solvent conditions. In water/methanol conditions (where CoTSPc is mainly monomeric, and unionized forms of the phenols), phenol and hydroquinone were the main oxidation products, while in phosphate buffer solutions (pH 7 and 10 for TCP and 2-CP, respectively, where CoTSPc is mainly aggregated, and ionized forms of the phenols), benzoquinone was the main product. In contrast to CoTSPc, other MTSPc complexes studied (AlTSPc, CuTSPc and NiTSPc) exhibited no detectable catalytic effect on the oxidation of chlorophenols under the experimental conditions employed, thus proving the effect of the central metal ions on efficient catalysis of chlorophenol. Reaction pathways are proposed based on the relative time of oxidation products formation.
- Full Text:
- Date Issued: 2005
Comparative electrooxidation of sulphite by self-assembled monolayers (SAMs) of Co (II), Fe (II), Ni (II) and Mn (III) tetrakis benzylmercapto and dodecylmercapto metallophthalocyanines complexes on gold electrodes
- Agboola, Bolade, Nyokong, Tebello
- Authors: Agboola, Bolade , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281223 , vital:55703 , xlink:href="https://doi.org/10.1016/j.talanta.2006.11.042"
- Description: This work reports on the use of Co(II), Fe(II), Mn(III) and Ni(II) tetrakis benzylmercapto and dodecylmercapto phthalocyanine complexes for gold electrode modification for electrooxidation of sulphite ions. The complexes were successfully used to modify gold electrodes by self-assembled monolayer (SAM) technique. The self-assembled films are stable and showed blocking characteristics towards the following Faradaic processes; gold surface oxidation, underpotential deposition (UPD) of copper and solution redox chemistry of [Fe(H2O)63+]/[Fe(H2O)62+]. All the modified electrodes showed improved catalytic activities than the unmodified gold electrode towards sulphite ion electrooxidation with all the modified electrodes exhibiting high resistance to electrode surface passivation. Better catalytic performance were obtained for the CoPcs, FePcs and MnPcs which have metal based redox processes within the range of the sulphite electrooxidation peak, while the NiPcs which did not show metal based redox reaction performed less. The catalytic current was found to be linear with sulphite ion concentration in the concentration range employed in this work (0.1–1 mM) and sensitivities ranging from 1.68 to 2.96 μA/mM were observed for all the modified electrodes. Mechanisms of the catalytic oxidation of sulphite ions are proposed.
- Full Text:
- Date Issued: 2007
- Authors: Agboola, Bolade , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281223 , vital:55703 , xlink:href="https://doi.org/10.1016/j.talanta.2006.11.042"
- Description: This work reports on the use of Co(II), Fe(II), Mn(III) and Ni(II) tetrakis benzylmercapto and dodecylmercapto phthalocyanine complexes for gold electrode modification for electrooxidation of sulphite ions. The complexes were successfully used to modify gold electrodes by self-assembled monolayer (SAM) technique. The self-assembled films are stable and showed blocking characteristics towards the following Faradaic processes; gold surface oxidation, underpotential deposition (UPD) of copper and solution redox chemistry of [Fe(H2O)63+]/[Fe(H2O)62+]. All the modified electrodes showed improved catalytic activities than the unmodified gold electrode towards sulphite ion electrooxidation with all the modified electrodes exhibiting high resistance to electrode surface passivation. Better catalytic performance were obtained for the CoPcs, FePcs and MnPcs which have metal based redox processes within the range of the sulphite electrooxidation peak, while the NiPcs which did not show metal based redox reaction performed less. The catalytic current was found to be linear with sulphite ion concentration in the concentration range employed in this work (0.1–1 mM) and sensitivities ranging from 1.68 to 2.96 μA/mM were observed for all the modified electrodes. Mechanisms of the catalytic oxidation of sulphite ions are proposed.
- Full Text:
- Date Issued: 2007
Synthesis and electrochemical properties of benzyl-mercapto and dodecyl-mercapto tetrasubstituted manganese phthalocyanine complexes
- Agboola, Bolade, Ozoemena, Kenneth I, Westbroek, Philippe, Nyokong, Tebello
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Westbroek, Philippe , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281321 , vital:55713 , xlink:href="https://doi.org/10.1016/j.electacta.2006.09.002"
- Description: Manganese tetrakis (benzyl-mercapto) phthalocyanine (MnTBMPc) and manganese tetrakis (dodecyl-mercapto) phthalocyanine (MnTDMPc) complexes were synthesized and their spectral and electrochemical properties are reported. Cyclic voltammetric data showed three reversible to quasi-reversible and two irreversible redox processes for both complexes. Ring substituents influenced the positions of both oxidation and reduction redox couples. Spectroelectrochemistry confirmed the first two reductions to be due to MnIIIPc2−/MnIIPc2− and MnIIPc3−/MnIIPc2− processes. The first example of a formation of self-assembled monolayers (SAMs) using thiol substituted MnPc complexes is presented, the SAMs were found to show blocking characteristics towards some faradaic reactions.
- Full Text:
- Date Issued: 2007
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Westbroek, Philippe , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/281321 , vital:55713 , xlink:href="https://doi.org/10.1016/j.electacta.2006.09.002"
- Description: Manganese tetrakis (benzyl-mercapto) phthalocyanine (MnTBMPc) and manganese tetrakis (dodecyl-mercapto) phthalocyanine (MnTDMPc) complexes were synthesized and their spectral and electrochemical properties are reported. Cyclic voltammetric data showed three reversible to quasi-reversible and two irreversible redox processes for both complexes. Ring substituents influenced the positions of both oxidation and reduction redox couples. Spectroelectrochemistry confirmed the first two reductions to be due to MnIIIPc2−/MnIIPc2− and MnIIPc3−/MnIIPc2− processes. The first example of a formation of self-assembled monolayers (SAMs) using thiol substituted MnPc complexes is presented, the SAMs were found to show blocking characteristics towards some faradaic reactions.
- Full Text:
- Date Issued: 2007