Distribution and use of cash income from basket and mat crafting: Implications for rural livelihoods in the Eastern Cape, South Africa
- Adam, Y O, Shackleton, Charlie M
- Authors: Adam, Y O , Shackleton, Charlie M
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/180434 , vital:43388 , xlink:href="https://doi.org/10.1080/14728028.2016.1186576"
- Description: The objective of this paper was to investigate the extent to which baskets and mats local trade contributes to rural livelihoods of the crafters’ household and community downstream income. Primary data were collected through structured interviews with 83 crafters from Noqhekwana village in Port St. Johns municipality using snowball sampling in May, 2015. The survey was supplemented by secondary data and direct observations. The findings show that crafting contributed 35% of crafter’s household total income. The received income is spent on expenses in the household and downstream actors depending on the crafter’s priorities. Lack of organization between crafters, access to sufficient raw material, and low prices were identified as major challenges involved in the production and trade of the products.
- Full Text:
- Date Issued: 2016
- Authors: Adam, Y O , Shackleton, Charlie M
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/180434 , vital:43388 , xlink:href="https://doi.org/10.1080/14728028.2016.1186576"
- Description: The objective of this paper was to investigate the extent to which baskets and mats local trade contributes to rural livelihoods of the crafters’ household and community downstream income. Primary data were collected through structured interviews with 83 crafters from Noqhekwana village in Port St. Johns municipality using snowball sampling in May, 2015. The survey was supplemented by secondary data and direct observations. The findings show that crafting contributed 35% of crafter’s household total income. The received income is spent on expenses in the household and downstream actors depending on the crafter’s priorities. Lack of organization between crafters, access to sufficient raw material, and low prices were identified as major challenges involved in the production and trade of the products.
- Full Text:
- Date Issued: 2016
Exploring recurring dreams as a catalyst for image-making in Visual Art
- Authors: Adams, Demi
- Date: 2021-04
- Subjects: Dreams and the arts , Dreams in motion pictures
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/52424 , vital:43640
- Description: The purpose of this study was to create a body of work which focused on the recurring dreams I have been experiencing since early childhood. I had dreams about a world which I could access through the back of my bedroom cupboard or a crack in my ceiling. This world is one which never experiences daytime; it is covered in various crystals and has its own inhabitants. I started keeping dream diaries to create my artworks, essentially creating a Paracosm. Paracosm is: “… a detailed imaginary world, especially one created by a child” (Your dictionary, 2020: 1). The problem of this study was thus: was it possible to recreate my Crystal-Lunar World (personal dream narrative) using visual art so others could experience it and which methods should be employed to substantiate these recurring dreams. Thus, the overarching research question is how do recurring personal dreams translate into visual art to sustain a language which manifests in an individual visual narrative. I made use of mixed media paintings and three-dimensional objects to illustrate scenes from my Crystal-Lunar World. I kept Dream Diaries to collect data on my recurring dreams and extract frequencies and group them into themes to create my artworks. The dream diaries also substantiated what I was painting and making. I also kept drawing journals to study the various crystals and to illustrate them and the creatures I see. , Thesis (MA) -- Faculty of Humanities, 2021
- Full Text:
- Date Issued: 2021-04
- Authors: Adams, Demi
- Date: 2021-04
- Subjects: Dreams and the arts , Dreams in motion pictures
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/52424 , vital:43640
- Description: The purpose of this study was to create a body of work which focused on the recurring dreams I have been experiencing since early childhood. I had dreams about a world which I could access through the back of my bedroom cupboard or a crack in my ceiling. This world is one which never experiences daytime; it is covered in various crystals and has its own inhabitants. I started keeping dream diaries to create my artworks, essentially creating a Paracosm. Paracosm is: “… a detailed imaginary world, especially one created by a child” (Your dictionary, 2020: 1). The problem of this study was thus: was it possible to recreate my Crystal-Lunar World (personal dream narrative) using visual art so others could experience it and which methods should be employed to substantiate these recurring dreams. Thus, the overarching research question is how do recurring personal dreams translate into visual art to sustain a language which manifests in an individual visual narrative. I made use of mixed media paintings and three-dimensional objects to illustrate scenes from my Crystal-Lunar World. I kept Dream Diaries to collect data on my recurring dreams and extract frequencies and group them into themes to create my artworks. The dream diaries also substantiated what I was painting and making. I also kept drawing journals to study the various crystals and to illustrate them and the creatures I see. , Thesis (MA) -- Faculty of Humanities, 2021
- Full Text:
- Date Issued: 2021-04
Contributions to the study of a class of optimal control problems on the orthogonal groups SO(3) and SO(4)
- Authors: Adams, Ross Montague
- Date: 2015
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/64826 , vital:28608
- Description: In this thesis we investigate a class of invariant optimal control problems, and their associated quadratic Hamilton-Poisson systems, on the orthogonal groups SO(3) and SO(4). Specifically, we are concerned with the class of left-invariant control affine systems. We begin by classifying all cost-extended systems on SO(3) under cost equivalence. (Cost-extended systems are closely related to optimal control problems.) A classification of all quadratic Hamilton-Poisson systems on the (minus) Lie-Poisson space so(3)*, under affine equivalence, is also obtained. For the normal forms obtained in our classification (of Hamilton-Poisson systems) we investigate the (Lyapunov) stability nature of the equilibria using spectral and energy-Casimir methods. For a subclass of these systems, we obtain analytic expressions for the integral curves of the associated Hamiltonian vector fields in terms of (basic) Jacobi elliptic functions. The explicit relationship between the classification of cost-extended systems on SO(3) and the classification of quadratic Hamilton- Poisson systems on so(3)* is provided. On SO(4), a classification of all left-invariant control affine systems under L-equivalence is obtained. We then determine which of these representatives are controllable, thus obtaining a classification under detached feedback equivalence. We also obtain a partial classification of quadratic Hamilton-Poisson systems on the Lie-Poisson space so(4)*. An investigation of the stability nature of the equilibria for a subclass of these systems is also done. Several illustrative examples of optimal control problems on the orthogonal group SO(3) are provided. More specifically, we consider an optimal control problem corresponding to a representative of our classification (of cost-extended system) for each possible number of control inputs. For each of these problems, we obtain explicit expressions for the extremal trajectories on the homogeneous space S2 by projecting the extremal trajectories on the group SO(3). The examples provided show how our classifications of cost-extended systems and Hamilton-Poisson systems can be used to obtain the optimal controls and the extremal trajectories corresponding to a large class of optimal control problems on SO(3). An example of a four-input optimal control problem on SO(4) is also provided. This example is provided to show how the solutions of certain problems on SO(4) can be related to the solutions of certain optimal control problems on SO(3).
- Full Text:
- Date Issued: 2015
- Authors: Adams, Ross Montague
- Date: 2015
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/64826 , vital:28608
- Description: In this thesis we investigate a class of invariant optimal control problems, and their associated quadratic Hamilton-Poisson systems, on the orthogonal groups SO(3) and SO(4). Specifically, we are concerned with the class of left-invariant control affine systems. We begin by classifying all cost-extended systems on SO(3) under cost equivalence. (Cost-extended systems are closely related to optimal control problems.) A classification of all quadratic Hamilton-Poisson systems on the (minus) Lie-Poisson space so(3)*, under affine equivalence, is also obtained. For the normal forms obtained in our classification (of Hamilton-Poisson systems) we investigate the (Lyapunov) stability nature of the equilibria using spectral and energy-Casimir methods. For a subclass of these systems, we obtain analytic expressions for the integral curves of the associated Hamiltonian vector fields in terms of (basic) Jacobi elliptic functions. The explicit relationship between the classification of cost-extended systems on SO(3) and the classification of quadratic Hamilton- Poisson systems on so(3)* is provided. On SO(4), a classification of all left-invariant control affine systems under L-equivalence is obtained. We then determine which of these representatives are controllable, thus obtaining a classification under detached feedback equivalence. We also obtain a partial classification of quadratic Hamilton-Poisson systems on the Lie-Poisson space so(4)*. An investigation of the stability nature of the equilibria for a subclass of these systems is also done. Several illustrative examples of optimal control problems on the orthogonal group SO(3) are provided. More specifically, we consider an optimal control problem corresponding to a representative of our classification (of cost-extended system) for each possible number of control inputs. For each of these problems, we obtain explicit expressions for the extremal trajectories on the homogeneous space S2 by projecting the extremal trajectories on the group SO(3). The examples provided show how our classifications of cost-extended systems and Hamilton-Poisson systems can be used to obtain the optimal controls and the extremal trajectories corresponding to a large class of optimal control problems on SO(3). An example of a four-input optimal control problem on SO(4) is also provided. This example is provided to show how the solutions of certain problems on SO(4) can be related to the solutions of certain optimal control problems on SO(3).
- Full Text:
- Date Issued: 2015
Antiviral drug discovery: preparing for the next pandemic
- Adamson, Catherine S, Chibale, Kelly, Goss, Rebecca J M, Jaspars, Marcel, Newman, David J, Dorrington, Rosemary A
- Authors: Adamson, Catherine S , Chibale, Kelly , Goss, Rebecca J M , Jaspars, Marcel , Newman, David J , Dorrington, Rosemary A
- Date: 2021
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/177499 , vital:42827 , DOI: 10.1039/d0cs01118e
- Description: Clinically approved antiviral drugs are currently available for only 10 of the more than 220 viruses known to infect humans. The SARS-CoV-2 outbreak has exposed the critical need for compounds that can be rapidly mobilised for the treatment of re-emerging or emerging viral diseases, while vaccine development is underway. We review the current status of antiviral therapies focusing on RNA viruses, highlighting strategies for antiviral drug discovery and discuss the challenges, solutions and options to accelerate drug discovery efforts.
- Full Text:
- Date Issued: 2021
- Authors: Adamson, Catherine S , Chibale, Kelly , Goss, Rebecca J M , Jaspars, Marcel , Newman, David J , Dorrington, Rosemary A
- Date: 2021
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/177499 , vital:42827 , DOI: 10.1039/d0cs01118e
- Description: Clinically approved antiviral drugs are currently available for only 10 of the more than 220 viruses known to infect humans. The SARS-CoV-2 outbreak has exposed the critical need for compounds that can be rapidly mobilised for the treatment of re-emerging or emerging viral diseases, while vaccine development is underway. We review the current status of antiviral therapies focusing on RNA viruses, highlighting strategies for antiviral drug discovery and discuss the challenges, solutions and options to accelerate drug discovery efforts.
- Full Text:
- Date Issued: 2021
Cloud computing adoption: Strategies for Sub-Saharan Africa SMEs for enhancing competitiveness
- Authors: Adane, Martin
- Date: 2018
- Subjects: business intelligence small businesses business planning Article
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/6862 , vital:51101 , xlink:href="https://doi.org/10.1080/20421338.2018.1439288"
- Description: Small and medium-sized enterprises (SMEs) need to design and implement strategies for adopting new technologies as a competitive tool for maintaining their competitive advantage and cloud computing is at its peak. Since its emergence, there has been a surge in the adoption of cloud computing with research into its adoption primarily concentrated on bigger firms. However, a major characteristic of cloud computing is the anticipated possibilities it holds for SMEs. This paper primarily explores cloud computing adoption strategies for SMEs operating in Sub-Saharan Africa. Using a mixed method approach, a sample of 261 respondents and 11 SMEs was respectively used for the quantitative and qualitative stages of the research. The results reveal that, even though SMEs have their unique expectations for adopting cloud computing, they were of the consensus that elements of an adoption strategy should include adoption goals, a roadmap, and considerations. The paper makes specific recommendations to SMEs to develop adoption strategies that meet their specific needs if they expect cloud computing to play a stronger role to support more strategic initiatives to grow their businesses and improve customer experience.
- Full Text:
- Date Issued: 2018
- Authors: Adane, Martin
- Date: 2018
- Subjects: business intelligence small businesses business planning Article
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/6862 , vital:51101 , xlink:href="https://doi.org/10.1080/20421338.2018.1439288"
- Description: Small and medium-sized enterprises (SMEs) need to design and implement strategies for adopting new technologies as a competitive tool for maintaining their competitive advantage and cloud computing is at its peak. Since its emergence, there has been a surge in the adoption of cloud computing with research into its adoption primarily concentrated on bigger firms. However, a major characteristic of cloud computing is the anticipated possibilities it holds for SMEs. This paper primarily explores cloud computing adoption strategies for SMEs operating in Sub-Saharan Africa. Using a mixed method approach, a sample of 261 respondents and 11 SMEs was respectively used for the quantitative and qualitative stages of the research. The results reveal that, even though SMEs have their unique expectations for adopting cloud computing, they were of the consensus that elements of an adoption strategy should include adoption goals, a roadmap, and considerations. The paper makes specific recommendations to SMEs to develop adoption strategies that meet their specific needs if they expect cloud computing to play a stronger role to support more strategic initiatives to grow their businesses and improve customer experience.
- Full Text:
- Date Issued: 2018
Exploring socialities on Black Twitter: an ethnographic study of everyday concerns of South African users in 2018 and 2019
- Authors: Adebayo, Binwe
- Date: 2020
- Subjects: Twitter (Firm) , Social media South Africa , Social media and society South Africa , Black people and mass media South Africa , Language and the Internet South Africa , Mass media and culture South Africa , Race in mass media , Ethnicity in mass media , Mass media and minorities South Africa , Mass media Social aspects South Africa , Sex differences in mass media , Social media Political aspects South Africa , South Africa Social conditions , Finance In mass media , Intersectionality (Sociology) South Africa , Black Twitter
- Language: English
- Type: text , Thesis , Masters , MA
- Identifier: http://hdl.handle.net/10962/140575 , vital:37900
- Description: In this thesis, I examine the phenomenon of Black Twitter, as it exists in South Africa. Drawing on its socio-cultural and linguistic elements, I analyse the kinds of socialities which are constituted on the platform. In the study, I do this by focusing on the key issues which drive the space by evaluating the key everyday concerns as expressed by its users. As such, the overarching lens focuses on three elements: Firstly, the idea of socialities and the way in which they manifest in online spaces; a focus on the everyday as an important site for social inquiry; and lastly the issue of ‘blackness’, in terms of the way it is used and understood in the South African Black Twitter context. Historically, the Black Twitter space has been linked almost exclusively to its broad base of African American users, who are significant both in terms of their numbers, and their impact on online social culture. However, in this study I engage with the ways in which Black Twitter has been adopted, co-opted and used by young South Africans. As a bona fide ‘member’ of South African Black Twitter, my approach to the study was cyberethnographic. Drawing on my access to the space, my knowledge of many of its members and dynamics, I engaged in participant observation as my primary methodology. My discussion focuses on three areas of everyday concerns, namely: gender and sexuality; race and politics; finances and the economy. These three areas emerge both as prominent sites of discussion, but also give the best insight into the ways in which young South Africans are grappling with these issues. My analysis focuses on how everyday concerns are handled on the platform, and I focus on the deployment of solidarity, formal language, platform-based language and the invocation of blackness. I argue in my conclusion that while the structure of the broad Black Twitter space reflects a leaning towards a digital public sphere, that the process and construction of Black Twitter’s ideas and content are approached via an incomplete, fluid convivial approach.
- Full Text:
- Date Issued: 2020
- Authors: Adebayo, Binwe
- Date: 2020
- Subjects: Twitter (Firm) , Social media South Africa , Social media and society South Africa , Black people and mass media South Africa , Language and the Internet South Africa , Mass media and culture South Africa , Race in mass media , Ethnicity in mass media , Mass media and minorities South Africa , Mass media Social aspects South Africa , Sex differences in mass media , Social media Political aspects South Africa , South Africa Social conditions , Finance In mass media , Intersectionality (Sociology) South Africa , Black Twitter
- Language: English
- Type: text , Thesis , Masters , MA
- Identifier: http://hdl.handle.net/10962/140575 , vital:37900
- Description: In this thesis, I examine the phenomenon of Black Twitter, as it exists in South Africa. Drawing on its socio-cultural and linguistic elements, I analyse the kinds of socialities which are constituted on the platform. In the study, I do this by focusing on the key issues which drive the space by evaluating the key everyday concerns as expressed by its users. As such, the overarching lens focuses on three elements: Firstly, the idea of socialities and the way in which they manifest in online spaces; a focus on the everyday as an important site for social inquiry; and lastly the issue of ‘blackness’, in terms of the way it is used and understood in the South African Black Twitter context. Historically, the Black Twitter space has been linked almost exclusively to its broad base of African American users, who are significant both in terms of their numbers, and their impact on online social culture. However, in this study I engage with the ways in which Black Twitter has been adopted, co-opted and used by young South Africans. As a bona fide ‘member’ of South African Black Twitter, my approach to the study was cyberethnographic. Drawing on my access to the space, my knowledge of many of its members and dynamics, I engaged in participant observation as my primary methodology. My discussion focuses on three areas of everyday concerns, namely: gender and sexuality; race and politics; finances and the economy. These three areas emerge both as prominent sites of discussion, but also give the best insight into the ways in which young South Africans are grappling with these issues. My analysis focuses on how everyday concerns are handled on the platform, and I focus on the deployment of solidarity, formal language, platform-based language and the invocation of blackness. I argue in my conclusion that while the structure of the broad Black Twitter space reflects a leaning towards a digital public sphere, that the process and construction of Black Twitter’s ideas and content are approached via an incomplete, fluid convivial approach.
- Full Text:
- Date Issued: 2020
On-site evaluation of smoking, alcohol consumption and physical inactivity among commercial taxi drivers in Buffalo City Metropolitan Municipality, South Africa
- Adedokun, Aanuoluwa Odunayo, Ter Goon, Daniel, Owolabi, Eyitayo Omolara, Adeniyi, Oladele Vincent, Ajayi, Anthony Idowu
- Authors: Adedokun, Aanuoluwa Odunayo , Ter Goon, Daniel , Owolabi, Eyitayo Omolara , Adeniyi, Oladele Vincent , Ajayi, Anthony Idowu
- Date: 2019
- Subjects: Alcohol use , Substance use , Commercial drivers
- Language: English
- Type: article , text
- Identifier: http://hdl.handle.net/11260/5086 , vital:44345 , https://doi.org/10.5539/gjhs.v11n2p110
- Description: Commercial drivers have been identified as eliciting behaviours that promote non- communicable diseases and road traffic accidents. The aim of the study is to determine the prevalence and pattern of alcohol use, smoking and physical inactivity among commercial taxi drivers in Buffalo City Metropolitan Municipality, South Africa. A cross-sectional study was conducted among 403 commercial drivers using the face-to-face interviews method. The WHO STEPwise questionnaire was used to obtain the demographic data, self-reported rate of alcohol consumption, tobacco use and physical inactivity. The participants’ mean age was 43.3 ± 12.5 years. About 30% of the participants were daily smokers, 37% consumed alcohol regularly and only 18% were physically active, whilst 82% were physically inactive. The prevalence of alcohol use, smoking and physical inactivity is high among commercial drivers in East London. Workplace health education on the health effects of these lifestyles’ risky behaviours on individuals and the general public should be given to the drivers.
- Full Text:
- Date Issued: 2019
- Authors: Adedokun, Aanuoluwa Odunayo , Ter Goon, Daniel , Owolabi, Eyitayo Omolara , Adeniyi, Oladele Vincent , Ajayi, Anthony Idowu
- Date: 2019
- Subjects: Alcohol use , Substance use , Commercial drivers
- Language: English
- Type: article , text
- Identifier: http://hdl.handle.net/11260/5086 , vital:44345 , https://doi.org/10.5539/gjhs.v11n2p110
- Description: Commercial drivers have been identified as eliciting behaviours that promote non- communicable diseases and road traffic accidents. The aim of the study is to determine the prevalence and pattern of alcohol use, smoking and physical inactivity among commercial taxi drivers in Buffalo City Metropolitan Municipality, South Africa. A cross-sectional study was conducted among 403 commercial drivers using the face-to-face interviews method. The WHO STEPwise questionnaire was used to obtain the demographic data, self-reported rate of alcohol consumption, tobacco use and physical inactivity. The participants’ mean age was 43.3 ± 12.5 years. About 30% of the participants were daily smokers, 37% consumed alcohol regularly and only 18% were physically active, whilst 82% were physically inactive. The prevalence of alcohol use, smoking and physical inactivity is high among commercial drivers in East London. Workplace health education on the health effects of these lifestyles’ risky behaviours on individuals and the general public should be given to the drivers.
- Full Text:
- Date Issued: 2019
Integration of nanostructured metal sulfides into titanium (iv) oxide for high performance dye sensitized solar cell
- Adedoyin Mojeed Agoro https://orcid.org/0000-0002-0434-9635
- Authors: Adedoyin Mojeed Agoro https://orcid.org/0000-0002-0434-9635
- Date: 2020-01
- Subjects: Nanostructured materials , Sulfur compounds
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21523 , vital:48857
- Description: The work in this thesis describes synthesis, characterization and integration of nanostructured metal sulfides into titanium (IV) oxide for high performance dye sensitized solar cell. The synthesised single source precursors were evaluated using TGA, FTIR, , UV-Vis, PL,1H and 13CNMR, SEM, EDS, HRTEM, XRD, AFM, Raman, I-V, CV, Bode plot and EIS. TGA revealed the thermal degradation and quantified the mass percentage of metal sulphides as 33percent, 45percent and 27percent for CuS, PbS and SnS nanoparticles, respectively. FTIR analysis showed bands at 1580-1450 cm-1, and 1060-940 cm-1 tentatively assigned to C-N and C-S stretching frequencies correspondingly. The (M-S) stretching was observed at 577-406 cm-1 for the complexes using bis(N-di-isopropyl-N-octyldithiocarbamato) as primary ligands. IR spectra of bis(N-1,4-phenyl-N-(4-morpholinedithiocarbamato) as secondary ligands suggested the presence of (C-N) vibrations at 1508-1513 cm-1 for the complexes and 1507-1584 cm-1 for the ligands. The bands in the region of 973-1030 cm-1 were assigned to the complexes and 974- 983 cm-1 were attributed to the ligands, whereas vibration frequencies at 416-625 cm-1 were Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. tentatively assigned to M-S bond in the complexes. UV-Vis spectroscopy analysis for the complexes and from primary and secondary ligands are between within the range of 338 – 340 nm. PL studies of the primary ligands with metal complexes indicated emissions at 464 nm, 462 nm, 462 nm for Pb(II) and Sn(II), and Cu(II). The presence of secondary ligands was revealed by the absorption peaks at 455, 456 and 457 nm, exhibiting both the signals and chemical constituents of the respective ligands and their corresponding complexes. The electrochemistry in chapters 3 and 4 reveals that phase angle in the Bode plots changes with frequencies for Sn(II) complexes at 58, 57 and 8 respectively. Bode plots showed remarkable electronics of Cu(II) and Pb(II) complex interfaces. The CV curves exhibit two kinds of redox peaks indicating reduction at the negative potentials and oxidation at the positive potentials. The EIS, electrodes produced Rct for Pb(II), Cu(II) and Sn(II) electrodes in chapter 3. Moreover The EIS revealed that Sn(II) sensitizer displaced a stronger chemical capacitance and improved efficiency which could lead to better electron lifetime yield. The obtained CV exhibited anodic and cathodic peaks for Pb(II), connoting a reduction in Pb2+ and oxidation in Pb2-. Bode plot phase angle displayed Sn(II) and Pb(II) with maxima phase, indicating the presence of time constants of the electrode processes in Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes. From the results in chapter 4, the XRD patterns exhibited good crystalline nature of CuS as a result of sharp and strong diffraction peaks obtained. There are eight peaks of 2θ angle between 26° and 79° relating to orthorhombic structure of SnS. While PbS has a cubic structure with polycrystalline nature, PbS/HDA and PbS both correspond to their crystalline planes of (200), (111), (220), (311), (222), (400), (331), (420) and (422) affirming to PbS QDs structure. SnS/HDA and SnS photosensitizers displayed eleven peaks between the values of 27.02° to 66.05° for SnS/HDA and 26.03° to 66.04° for SnS, in confirming the orthorhombic structure. SEM analysis revealed hexagonal structure for CuS, while PbS and SnS exhibited mesoporous nanostructures with spherical nanoparticles. HRTEM images indicated spherical nano-particles with particle sizes in the range of 3.14 - 44.39 nm. The outcome of HRTEM analysis revealed crystallite sizes varying as 10.90 – 11.57 nm, 3.14 – 5.95 nm and 14.96 – 44.39 nm for the CuS, PbS and SnS, originated from the primary ligands. HRTEM images originating from the Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes indicated spherical nano-particles with particle sizes of 3.14 - 44.39 nm. Raman images in chapter 5 revealed the presence of Raman active modes of E2g 66 cm-1 and 304, cm-1 and E1g 627 cm-1 and 706 cm-1 for CuS, the active modes of TO 65 cm-1 and 2LO 626 cm-1 for PbS, active modes of B1g 69 cm-1 for SnS and 266 cm-1 for Ag. From the AFM results in chapter 5, CuS photosensitizer displayed a smooth surface and particle estimated to be 0.50 μm and height profile of 12percent. The PbS photosensitizer exhibited particle size of 1.82 μm and 0.654 μm for PbS/HDA, depicting a regular crystal growth rate. The size distribution of SnS nanoparticle at 357 nm connotes smooth surface and good compactness on the substrate. However, SnS/HDA at 122 nm displayed shape and size of non-symmetrical particles. AFM analysis in chapter 8 revealed good size roughness for CuS film. PbS exhibited particle size of 365 nm and size height of 18percent as the smoothest film, while PbS/HDA revealed 1.22 um size with 9percent size height. The evaluated particle sizes varied as 0.11- 1.18 um for SnS/HDA and 0.054 – 0.54 um for SnS films grown at 360 ℃ with size height of 16.8 and 8.4percent. The I-V efficiency obtained indicated that the CuS exhibited a much better efficiency in the QDSCs with higher Voc and the highest η being 2.85percent compared to CuS/HDA and Cu(II). High JSC of 11 mA/cm has been observed in the PbS/HDA QDSSCs, compared to the PbS and Pb(II) cells. The SnS/HDA exhibited a better performance compared to SnS and Sn(II) sensitizers due to the presence of HDA capping agent. , Thesis (MSc -- Faculty of Science and Agriculture, 2020
- Full Text:
- Date Issued: 2020-01
- Authors: Adedoyin Mojeed Agoro https://orcid.org/0000-0002-0434-9635
- Date: 2020-01
- Subjects: Nanostructured materials , Sulfur compounds
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21523 , vital:48857
- Description: The work in this thesis describes synthesis, characterization and integration of nanostructured metal sulfides into titanium (IV) oxide for high performance dye sensitized solar cell. The synthesised single source precursors were evaluated using TGA, FTIR, , UV-Vis, PL,1H and 13CNMR, SEM, EDS, HRTEM, XRD, AFM, Raman, I-V, CV, Bode plot and EIS. TGA revealed the thermal degradation and quantified the mass percentage of metal sulphides as 33percent, 45percent and 27percent for CuS, PbS and SnS nanoparticles, respectively. FTIR analysis showed bands at 1580-1450 cm-1, and 1060-940 cm-1 tentatively assigned to C-N and C-S stretching frequencies correspondingly. The (M-S) stretching was observed at 577-406 cm-1 for the complexes using bis(N-di-isopropyl-N-octyldithiocarbamato) as primary ligands. IR spectra of bis(N-1,4-phenyl-N-(4-morpholinedithiocarbamato) as secondary ligands suggested the presence of (C-N) vibrations at 1508-1513 cm-1 for the complexes and 1507-1584 cm-1 for the ligands. The bands in the region of 973-1030 cm-1 were assigned to the complexes and 974- 983 cm-1 were attributed to the ligands, whereas vibration frequencies at 416-625 cm-1 were Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. tentatively assigned to M-S bond in the complexes. UV-Vis spectroscopy analysis for the complexes and from primary and secondary ligands are between within the range of 338 – 340 nm. PL studies of the primary ligands with metal complexes indicated emissions at 464 nm, 462 nm, 462 nm for Pb(II) and Sn(II), and Cu(II). The presence of secondary ligands was revealed by the absorption peaks at 455, 456 and 457 nm, exhibiting both the signals and chemical constituents of the respective ligands and their corresponding complexes. The electrochemistry in chapters 3 and 4 reveals that phase angle in the Bode plots changes with frequencies for Sn(II) complexes at 58, 57 and 8 respectively. Bode plots showed remarkable electronics of Cu(II) and Pb(II) complex interfaces. The CV curves exhibit two kinds of redox peaks indicating reduction at the negative potentials and oxidation at the positive potentials. The EIS, electrodes produced Rct for Pb(II), Cu(II) and Sn(II) electrodes in chapter 3. Moreover The EIS revealed that Sn(II) sensitizer displaced a stronger chemical capacitance and improved efficiency which could lead to better electron lifetime yield. The obtained CV exhibited anodic and cathodic peaks for Pb(II), connoting a reduction in Pb2+ and oxidation in Pb2-. Bode plot phase angle displayed Sn(II) and Pb(II) with maxima phase, indicating the presence of time constants of the electrode processes in Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes. From the results in chapter 4, the XRD patterns exhibited good crystalline nature of CuS as a result of sharp and strong diffraction peaks obtained. There are eight peaks of 2θ angle between 26° and 79° relating to orthorhombic structure of SnS. While PbS has a cubic structure with polycrystalline nature, PbS/HDA and PbS both correspond to their crystalline planes of (200), (111), (220), (311), (222), (400), (331), (420) and (422) affirming to PbS QDs structure. SnS/HDA and SnS photosensitizers displayed eleven peaks between the values of 27.02° to 66.05° for SnS/HDA and 26.03° to 66.04° for SnS, in confirming the orthorhombic structure. SEM analysis revealed hexagonal structure for CuS, while PbS and SnS exhibited mesoporous nanostructures with spherical nanoparticles. HRTEM images indicated spherical nano-particles with particle sizes in the range of 3.14 - 44.39 nm. The outcome of HRTEM analysis revealed crystallite sizes varying as 10.90 – 11.57 nm, 3.14 – 5.95 nm and 14.96 – 44.39 nm for the CuS, PbS and SnS, originated from the primary ligands. HRTEM images originating from the Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes indicated spherical nano-particles with particle sizes of 3.14 - 44.39 nm. Raman images in chapter 5 revealed the presence of Raman active modes of E2g 66 cm-1 and 304, cm-1 and E1g 627 cm-1 and 706 cm-1 for CuS, the active modes of TO 65 cm-1 and 2LO 626 cm-1 for PbS, active modes of B1g 69 cm-1 for SnS and 266 cm-1 for Ag. From the AFM results in chapter 5, CuS photosensitizer displayed a smooth surface and particle estimated to be 0.50 μm and height profile of 12percent. The PbS photosensitizer exhibited particle size of 1.82 μm and 0.654 μm for PbS/HDA, depicting a regular crystal growth rate. The size distribution of SnS nanoparticle at 357 nm connotes smooth surface and good compactness on the substrate. However, SnS/HDA at 122 nm displayed shape and size of non-symmetrical particles. AFM analysis in chapter 8 revealed good size roughness for CuS film. PbS exhibited particle size of 365 nm and size height of 18percent as the smoothest film, while PbS/HDA revealed 1.22 um size with 9percent size height. The evaluated particle sizes varied as 0.11- 1.18 um for SnS/HDA and 0.054 – 0.54 um for SnS films grown at 360 ℃ with size height of 16.8 and 8.4percent. The I-V efficiency obtained indicated that the CuS exhibited a much better efficiency in the QDSCs with higher Voc and the highest η being 2.85percent compared to CuS/HDA and Cu(II). High JSC of 11 mA/cm has been observed in the PbS/HDA QDSSCs, compared to the PbS and Pb(II) cells. The SnS/HDA exhibited a better performance compared to SnS and Sn(II) sensitizers due to the presence of HDA capping agent. , Thesis (MSc -- Faculty of Science and Agriculture, 2020
- Full Text:
- Date Issued: 2020-01
Cultivation, nutritional and pharmacological evaluation of Celosia argentea (L) Kuntze: an endangered wild vegetable in the Eastern Cape Province of South Africa
- Adegbaju, Oluwafunmilayo Dorcas
- Authors: Adegbaju, Oluwafunmilayo Dorcas
- Date: 2019-09
- Subjects: Celosia , Edible greens
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19806 , vital:43250
- Description: Green leafy vegetables are important in human nutrition, but their cultivation is limited to a few staple ones. These vegetables possess high nutritious and therapeutic properties that could help in achieving nutritional security and alleviating the burden of some diseases. A typical example is Celosia argentea, which in South Africa, is little known and grossly under-utilized despite its numerous nutritional and pharmacological values. The present study investigated the cultivation, nutritional and pharmacological potentials of C. argentea at three stages of maturity of two trials. Evaluation of cultivation in the greenhouse towards possible domestication of C. argentea included seed viability test, seed germination under varying temperatures (5, 10, 15, 20 25 30, 35, 40°C), light conditions (continuous light, continuous darkness, alternating light and dark (12h light/12 dark photoperiod) and sowing depths (0, 1, 2, 3, 4 and 5cm). The nutritional evaluation assessed the proximal, mineral, vitamins and antinutrient content of the plant; while pharmacological potentials of C. argentea were evaluated by investigating the ultramorphology, phytochemical content, anti-oxidant, antimicrobial, toxicity and cell-based anti-inflammatory properties of the plant at different stages of growth. Germination experiment revealed that optimum seed germination requirements for C. argentea were 25°C, alternating light and dark regime and a sowing depth of 1cm. Microrphological assessment of C. argentea revealed that the leaves were amphistomatic; with the abaxial surface having higher stomata density. Characteristic, distinguishing protuberances were observed at the polar ends of the stomata on the adaxial surface of the plant epidermis, and the major elements on the foliar epidermis were beryllium, carbon, oxygen and potassium; while pigmentation and colouration, showing localization of bioactive compounds were mostly at the site where trichomes were abundant. Growth parameters and yield potential (plant height, stem girth, leaf area, number of leaves, number of branches, number of days to flowering, number of flowers as well as dry and fresh weight) of C. argentea showed that for agricultural practices on the field, increase in growth parameters should be expected around 4-5 weeks after transplanting while higher yield should be expected around 7-9 weeks after transplanting. The results encouraged cultivation during summer or late spring for best farm management. Proximal, mineral, vitamins and anti-nutrients content of C. argentea at three different maturity stages of two trials were performed using AOAC, ALASA and inductively coupled plasma-optical emission spectrometer techniques. Results revealed that the pre-flowering stage of growth had the highest ash (28.15± 0.10 percent) and crude protein (25.80 ± 0.20 percent) contents. While post-flowering stage had the highest carbohydrate (28.51± 0.20 percent and 36.16± 0.22 percent), crude fibre (33.41± 0.87 percent) and energy (435.28± 27.6 percent) with low fat and moisture (8.43± 0.15 percent and 6.35±0.09 percent) contents respectively; while no marked demarcation in most mineral contents in all the growth stages was observed. Zinc was highest at the flowering stage of growth, while vitamin contents decreased as the plant approached maturation. Antinutrients content of the plant was not dependent on growth stage. Total phenols, flavonoids and proanthocyanidin content of C. argentea were evaluated colourimetrically, while the antioxidant potency of the aqueous, acetone and methanolic extracts was measured using 2,2 diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), Ferric reducing antioxidant power (FRAP) and total antioxidant capacity (TAC) models. All the solvent extracts of the flowering stage had the highest total phenolic (80.75±4.21GAE/g), flavonoids (946.19±7.87QE/mg) and proanthocyanidin contents (100.90±1.29 CE/g); with the acetone extracts showing significantly higher phytochemical content. The flowering stage exhibited the best radical inhibitory activity, with the methanol extract having the highest scavenging power for ABTS and DPPH radicals, while acetone extract showed the highest inhibition against FRAP and highest total antioxidant capacity. The antimicrobial potential of the aqueous acetone and methanolic extracts of C. argentea evaluated using agar dilution method against six bacteria (Klebsiella pneumonia, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Bacillus cereus) and four fungal strains (Candida glabarata, Candida albicans and Penicillium aurantiogriseum and Penicillium chrysogenum) showed that Streptococcus pyrogenes and P. aeruginosa were susceptible to the methanol extracts of all the growing phases of both trials at 10 mg/mL; while Klebsiella pneumoniae was susceptible at 10 mg/mL to only the methanol post-flowering extracts of both trials. C. albicans and P. aurantiogriseum were highly susceptible to all the extracts. Possible toxicity evaluated using brine shrimp lethality assay and calculation of LC50 against brine shrimp nauplii revealed that C. argentea was not toxic at any stage of maturity at all concentrations evaluated. Anti-inflammatory activities and cytotoxicity of C. argentea extracts evaluated using RAW 264.7 macrophages and 3T3-L1 cell lines revealed that the acetone extract of the flowering stage had moderate anti-inflammatory activity with no significant toxicity against activated macrophages. Findings from this study indicate that C. argentea is a safe functional leafy vegetable of high nutritional and pharmacological importance which can easily be cultivated and domesticated in South Africa. This could significantly alleviate the burden of micronutrient deficiencies among pre-school children in rural communities. , Thesis (PhD) (Botany) -- University of Fort Hare, 2019
- Full Text:
- Date Issued: 2019-09
- Authors: Adegbaju, Oluwafunmilayo Dorcas
- Date: 2019-09
- Subjects: Celosia , Edible greens
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19806 , vital:43250
- Description: Green leafy vegetables are important in human nutrition, but their cultivation is limited to a few staple ones. These vegetables possess high nutritious and therapeutic properties that could help in achieving nutritional security and alleviating the burden of some diseases. A typical example is Celosia argentea, which in South Africa, is little known and grossly under-utilized despite its numerous nutritional and pharmacological values. The present study investigated the cultivation, nutritional and pharmacological potentials of C. argentea at three stages of maturity of two trials. Evaluation of cultivation in the greenhouse towards possible domestication of C. argentea included seed viability test, seed germination under varying temperatures (5, 10, 15, 20 25 30, 35, 40°C), light conditions (continuous light, continuous darkness, alternating light and dark (12h light/12 dark photoperiod) and sowing depths (0, 1, 2, 3, 4 and 5cm). The nutritional evaluation assessed the proximal, mineral, vitamins and antinutrient content of the plant; while pharmacological potentials of C. argentea were evaluated by investigating the ultramorphology, phytochemical content, anti-oxidant, antimicrobial, toxicity and cell-based anti-inflammatory properties of the plant at different stages of growth. Germination experiment revealed that optimum seed germination requirements for C. argentea were 25°C, alternating light and dark regime and a sowing depth of 1cm. Microrphological assessment of C. argentea revealed that the leaves were amphistomatic; with the abaxial surface having higher stomata density. Characteristic, distinguishing protuberances were observed at the polar ends of the stomata on the adaxial surface of the plant epidermis, and the major elements on the foliar epidermis were beryllium, carbon, oxygen and potassium; while pigmentation and colouration, showing localization of bioactive compounds were mostly at the site where trichomes were abundant. Growth parameters and yield potential (plant height, stem girth, leaf area, number of leaves, number of branches, number of days to flowering, number of flowers as well as dry and fresh weight) of C. argentea showed that for agricultural practices on the field, increase in growth parameters should be expected around 4-5 weeks after transplanting while higher yield should be expected around 7-9 weeks after transplanting. The results encouraged cultivation during summer or late spring for best farm management. Proximal, mineral, vitamins and anti-nutrients content of C. argentea at three different maturity stages of two trials were performed using AOAC, ALASA and inductively coupled plasma-optical emission spectrometer techniques. Results revealed that the pre-flowering stage of growth had the highest ash (28.15± 0.10 percent) and crude protein (25.80 ± 0.20 percent) contents. While post-flowering stage had the highest carbohydrate (28.51± 0.20 percent and 36.16± 0.22 percent), crude fibre (33.41± 0.87 percent) and energy (435.28± 27.6 percent) with low fat and moisture (8.43± 0.15 percent and 6.35±0.09 percent) contents respectively; while no marked demarcation in most mineral contents in all the growth stages was observed. Zinc was highest at the flowering stage of growth, while vitamin contents decreased as the plant approached maturation. Antinutrients content of the plant was not dependent on growth stage. Total phenols, flavonoids and proanthocyanidin content of C. argentea were evaluated colourimetrically, while the antioxidant potency of the aqueous, acetone and methanolic extracts was measured using 2,2 diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), Ferric reducing antioxidant power (FRAP) and total antioxidant capacity (TAC) models. All the solvent extracts of the flowering stage had the highest total phenolic (80.75±4.21GAE/g), flavonoids (946.19±7.87QE/mg) and proanthocyanidin contents (100.90±1.29 CE/g); with the acetone extracts showing significantly higher phytochemical content. The flowering stage exhibited the best radical inhibitory activity, with the methanol extract having the highest scavenging power for ABTS and DPPH radicals, while acetone extract showed the highest inhibition against FRAP and highest total antioxidant capacity. The antimicrobial potential of the aqueous acetone and methanolic extracts of C. argentea evaluated using agar dilution method against six bacteria (Klebsiella pneumonia, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Bacillus cereus) and four fungal strains (Candida glabarata, Candida albicans and Penicillium aurantiogriseum and Penicillium chrysogenum) showed that Streptococcus pyrogenes and P. aeruginosa were susceptible to the methanol extracts of all the growing phases of both trials at 10 mg/mL; while Klebsiella pneumoniae was susceptible at 10 mg/mL to only the methanol post-flowering extracts of both trials. C. albicans and P. aurantiogriseum were highly susceptible to all the extracts. Possible toxicity evaluated using brine shrimp lethality assay and calculation of LC50 against brine shrimp nauplii revealed that C. argentea was not toxic at any stage of maturity at all concentrations evaluated. Anti-inflammatory activities and cytotoxicity of C. argentea extracts evaluated using RAW 264.7 macrophages and 3T3-L1 cell lines revealed that the acetone extract of the flowering stage had moderate anti-inflammatory activity with no significant toxicity against activated macrophages. Findings from this study indicate that C. argentea is a safe functional leafy vegetable of high nutritional and pharmacological importance which can easily be cultivated and domesticated in South Africa. This could significantly alleviate the burden of micronutrient deficiencies among pre-school children in rural communities. , Thesis (PhD) (Botany) -- University of Fort Hare, 2019
- Full Text:
- Date Issued: 2019-09
Fluorescence “turn on” probe for bromide ion using nanoconjugates of glutathione-capped CdTe@ ZnS quantum dots with nickel tetraamino-phthalocyanine
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190479 , vital:44998 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.05.013"
- Description: In this paper, three differently sized glutathione (GSH)-capped CdTe@ZnS quantum dots (QDs) have been successfully conjugated to nickel tetraamino-phthalocyanine (NiTAPc) to form different QDs-NiTAPc nanocomplexes. Several techniques such as TEM, FT-IR, time-resolved fluorescence measurement and electronic spectroscopy were employed to characterize the nanocomplex. Bromide ion was chosen as a model anion to test the efficacy of the nanoprobe. The fluorescence of the nanoconjugate was “turned off” upon binding but was progressively “turned on” upon interaction with varying concentrations of bromide ion. Experimental results showed that the quantum size effect of nanocrystal QD determined the overall sensitivity and selectivity of the nanoprobe and followed the order QD563-NiTAPc > QD605-NiTAPc > QD621-NiTAPc. The mechanism of reaction is proposed.
- Full Text:
- Date Issued: 2013
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190479 , vital:44998 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.05.013"
- Description: In this paper, three differently sized glutathione (GSH)-capped CdTe@ZnS quantum dots (QDs) have been successfully conjugated to nickel tetraamino-phthalocyanine (NiTAPc) to form different QDs-NiTAPc nanocomplexes. Several techniques such as TEM, FT-IR, time-resolved fluorescence measurement and electronic spectroscopy were employed to characterize the nanocomplex. Bromide ion was chosen as a model anion to test the efficacy of the nanoprobe. The fluorescence of the nanoconjugate was “turned off” upon binding but was progressively “turned on” upon interaction with varying concentrations of bromide ion. Experimental results showed that the quantum size effect of nanocrystal QD determined the overall sensitivity and selectivity of the nanoprobe and followed the order QD563-NiTAPc > QD605-NiTAPc > QD621-NiTAPc. The mechanism of reaction is proposed.
- Full Text:
- Date Issued: 2013
A comparative study on the sensitive detection of hydroxyl radical using thiol-capped CdTe and CdTe/ZnS quantum dots
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242778 , vital:51077 , xlink:href="https://doi.org/10.1007/s10895-012-1089-2"
- Description: Four types of water-soluble luminescent quantum dots (QDs) whose surface was functionlaized with thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), or glutathione (GSH), were investigated for the sensitive and selective detection of hydroxyl radical (●OH) in aqueous media. It was found that the type of capping agent and QD influenced the sensitivity of the probe. The order of sensitivity of the probe was: GSH-CdTe@ZnS > MPA-CdTe@ZnS > TGA-CdTe > MPA-CdTe QDs. Under the optimum conditions, a limit of detection as low as 8.5 × 10-8 M was obtained using GSH-CdTe@ZnS. The effects of foreign reactive oxygen species and the Fenton reactants and products as possible interferences on the proposed probe were negligible for CdTe@ZnS QDs. Besides, experimental results indicated that CdTe@ZnS QDs were more attractive for the selective recognition of ●OH than CdTe QDs. The mechanistic reaction pathway between the QDs and ●OH is proposed.
- Full Text:
- Date Issued: 2012
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242778 , vital:51077 , xlink:href="https://doi.org/10.1007/s10895-012-1089-2"
- Description: Four types of water-soluble luminescent quantum dots (QDs) whose surface was functionlaized with thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), or glutathione (GSH), were investigated for the sensitive and selective detection of hydroxyl radical (●OH) in aqueous media. It was found that the type of capping agent and QD influenced the sensitivity of the probe. The order of sensitivity of the probe was: GSH-CdTe@ZnS > MPA-CdTe@ZnS > TGA-CdTe > MPA-CdTe QDs. Under the optimum conditions, a limit of detection as low as 8.5 × 10-8 M was obtained using GSH-CdTe@ZnS. The effects of foreign reactive oxygen species and the Fenton reactants and products as possible interferences on the proposed probe were negligible for CdTe@ZnS QDs. Besides, experimental results indicated that CdTe@ZnS QDs were more attractive for the selective recognition of ●OH than CdTe QDs. The mechanistic reaction pathway between the QDs and ●OH is proposed.
- Full Text:
- Date Issued: 2012
Optical properties of water-soluble L-cysteine-capped alloyed CdSeS quantum dot passivated with ZnSeTe and ZnSeTe/ZnS shells
- Adegoke, Oluwasesan, Nyokong, Tebello, Forbes, Patricia B C
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193609 , vital:45352 , xlink:href="https://doi.org/10.1016/j.optmat.2015.05.024"
- Description: Alloyed quantum dots (QDs) passivated with shell materials have valuable optical characteristics suitable for a wide array of applications. In this work, alloyed ternary CdSeS QDs passivated with ZnSeTe and ZnSeTe/ZnS shells have been synthesized via a hot-injection method and a ligand exchange reaction employing L-cysteine as a thiol ligand has been used to obtain these water-soluble nanocrystals for the first time. The photoluminescence (PL) quantum yield (QY) of alloyed L-cysteine-capped CdSeS was 71.2% but decreased significantly to 5.2% upon passivation with a ZnSeTe shell. The red shift in PL emission of the CdSeS/ZnSeTe QDs was attributed to be strain-induced whilst a lattice-induced process likely created defect states in the core/shell interface hence contributing to the decline in the PL QY. Nonetheless, the fluorescence stability of CdSeS/ZnSeTe QDs in aqueous solution was unperturbed. Further passivation with a ZnS shell (CdSeS/ZnSeTe/ZnS) improved the PL QY to a value of 58.7% and thus indicates that the defect state in the QDs core/shell/shell structure was reduced. PL lifetime exciton measurements indicated that the rates of decay of the QDs influenced their photophysical properties.
- Full Text:
- Date Issued: 2015
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193609 , vital:45352 , xlink:href="https://doi.org/10.1016/j.optmat.2015.05.024"
- Description: Alloyed quantum dots (QDs) passivated with shell materials have valuable optical characteristics suitable for a wide array of applications. In this work, alloyed ternary CdSeS QDs passivated with ZnSeTe and ZnSeTe/ZnS shells have been synthesized via a hot-injection method and a ligand exchange reaction employing L-cysteine as a thiol ligand has been used to obtain these water-soluble nanocrystals for the first time. The photoluminescence (PL) quantum yield (QY) of alloyed L-cysteine-capped CdSeS was 71.2% but decreased significantly to 5.2% upon passivation with a ZnSeTe shell. The red shift in PL emission of the CdSeS/ZnSeTe QDs was attributed to be strain-induced whilst a lattice-induced process likely created defect states in the core/shell interface hence contributing to the decline in the PL QY. Nonetheless, the fluorescence stability of CdSeS/ZnSeTe QDs in aqueous solution was unperturbed. Further passivation with a ZnS shell (CdSeS/ZnSeTe/ZnS) improved the PL QY to a value of 58.7% and thus indicates that the defect state in the QDs core/shell/shell structure was reduced. PL lifetime exciton measurements indicated that the rates of decay of the QDs influenced their photophysical properties.
- Full Text:
- Date Issued: 2015
Probing the sensitive and selective luminescent detection of peroxynitrite using thiol-capped CdTe and CdTe@ ZnS quantum dots
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193757 , vital:45393 , xlink:href="https://doi.org/10.1016/j.jlumin.2012.08.002"
- Description: CdTe and CdTe@ZnS quantum dots (QDs) capped with 3-mercaptopropionic acid (MPA), thioglycolic acid (TGA), or glutathione (GSH) have been employed for the first time as luminescent probes for the sensitive and selective detection of peroxynitrite (ONOO−) in aqueous solution. The sensitivity of the proposed probe followed the order: MPA–TGA–CdTe@ZnS>GSH–TGA–CdTe@ZnS>MPA–CdTe QDs. The varying degree of quenching is elucidated based on the QD–thiolate bond of CdTe@ZnS being more sensitive to oxidation from ONOO− than CdTe. The selectivity of the probe in the presence of co-existing species followed the order: GSH–TGA–CdTe@ZnS>MPA–TGA–CdTe@ZnS>MPA–CdTe QDs. QDs capped with MPA showed less selectivity for ONOO− than GSH. The best limit of detection (LOD) of 12.6 nM was obtained for MPA–TGA–CdTe@ZnS QDs. Time-resolved fluorescence measurements indicated that the interaction between ONOO− and the QDs is static in nature.
- Full Text:
- Date Issued: 2013
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193757 , vital:45393 , xlink:href="https://doi.org/10.1016/j.jlumin.2012.08.002"
- Description: CdTe and CdTe@ZnS quantum dots (QDs) capped with 3-mercaptopropionic acid (MPA), thioglycolic acid (TGA), or glutathione (GSH) have been employed for the first time as luminescent probes for the sensitive and selective detection of peroxynitrite (ONOO−) in aqueous solution. The sensitivity of the proposed probe followed the order: MPA–TGA–CdTe@ZnS>GSH–TGA–CdTe@ZnS>MPA–CdTe QDs. The varying degree of quenching is elucidated based on the QD–thiolate bond of CdTe@ZnS being more sensitive to oxidation from ONOO− than CdTe. The selectivity of the probe in the presence of co-existing species followed the order: GSH–TGA–CdTe@ZnS>MPA–TGA–CdTe@ZnS>MPA–CdTe QDs. QDs capped with MPA showed less selectivity for ONOO− than GSH. The best limit of detection (LOD) of 12.6 nM was obtained for MPA–TGA–CdTe@ZnS QDs. Time-resolved fluorescence measurements indicated that the interaction between ONOO− and the QDs is static in nature.
- Full Text:
- Date Issued: 2013
Fluorescence properties of alloyed ZnSeS quantum dots overcoated with ZnTe and ZnTe/ZnS shells
- Adegoke, Oluwasesan, Mashazi, Philani N, Nyokong, Tebello, Forbes, Patricia B C
- Authors: Adegoke, Oluwasesan , Mashazi, Philani N , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240754 , vital:50868 , xlink:href="https://doi.org/10.1016/j.optmat.2016.02.024"
- Description: Fluorescent alloyed ternary ZnSeS quantum dots (QDs) have been synthesized via the pyrolysis of organometallic precursors. The effects of passivation of ZnTe and ZnTe/ZnS shells on the optical properties of the ternary alloyed ZnSeS core have been studied. A ligand exchange reaction using L-cysteine as a capping ligand was used to obtain water-soluble nanocrystals. The nanocrystals were each characterized by UV/vis absorption and fluorescence spectroscopy, transmission electron microscopy, X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The photoluminescence (PL) quantum yield (QY) of alloyed ZnSeS QDs was 14% and this value increased to 27% when ZnTe was overcoated around the surface but further coating with a ZnS shell decreased the PL QY slightly to 24%. This implies that ZnTe shell suppressed non-radiative recombination exciton states in the alloyed core while further layering with a ZnS shell offered no further improvement in suppressing the defect states. XPS analysis confirmed the presence of the first shell layering but showed a weakened intensity signal of S (2p) and Se (3d) for the ZnSeS/ZnTe/ZnS QDs. Our work demonstrates for the first time that shell passivation of alloyed Zn-based QDs can offer improved optical properties. We hope the optical information presented in this work will be useful in the selection of alloyed Zn-based QDs appropriate for the intended application.
- Full Text:
- Date Issued: 2016
- Authors: Adegoke, Oluwasesan , Mashazi, Philani N , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240754 , vital:50868 , xlink:href="https://doi.org/10.1016/j.optmat.2016.02.024"
- Description: Fluorescent alloyed ternary ZnSeS quantum dots (QDs) have been synthesized via the pyrolysis of organometallic precursors. The effects of passivation of ZnTe and ZnTe/ZnS shells on the optical properties of the ternary alloyed ZnSeS core have been studied. A ligand exchange reaction using L-cysteine as a capping ligand was used to obtain water-soluble nanocrystals. The nanocrystals were each characterized by UV/vis absorption and fluorescence spectroscopy, transmission electron microscopy, X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The photoluminescence (PL) quantum yield (QY) of alloyed ZnSeS QDs was 14% and this value increased to 27% when ZnTe was overcoated around the surface but further coating with a ZnS shell decreased the PL QY slightly to 24%. This implies that ZnTe shell suppressed non-radiative recombination exciton states in the alloyed core while further layering with a ZnS shell offered no further improvement in suppressing the defect states. XPS analysis confirmed the presence of the first shell layering but showed a weakened intensity signal of S (2p) and Se (3d) for the ZnSeS/ZnTe/ZnS QDs. Our work demonstrates for the first time that shell passivation of alloyed Zn-based QDs can offer improved optical properties. We hope the optical information presented in this work will be useful in the selection of alloyed Zn-based QDs appropriate for the intended application.
- Full Text:
- Date Issued: 2016
Nanoconjugates of CdTe@ ZnS quantum dots with cobalt tetraamino-phthalocyanine
- Adegoke, Oluwasesan, Antunes, Edith M, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242049 , vital:50996 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.02.010"
- Description: The covalent linking of thiol-capped CdTe@ZnS QDs with cobalt tetraamino-phthalocyanine (CoTAPc) has been successfully carried out. Several techniques such as time-resolved fluorescence measurements, thermal gravimetric analysis,transmissionelectronmicroscopy andspectrophotometric techniques were employed to characterize the nanoconjugates. Covalent binding of the QDs with CoTAPc resulted in the fluorescence quenching of the former. In the presence of varying concentrations of superoxide anion (O2 •−), the fluorescence of the QDs in the conjugate was gradually enhanced and the detection limits obtained were 2.1 and 2.4 nM for the smaller and larger QDs, respectively. Based on the excellent selectivity displayed by the nanoconjugates towards O2 •− over other biologically active species, a potential nanosensor was developed.
- Full Text:
- Date Issued: 2013
- Authors: Adegoke, Oluwasesan , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242049 , vital:50996 , xlink:href="https://doi.org/10.1016/j.jphotochem.2013.02.010"
- Description: The covalent linking of thiol-capped CdTe@ZnS QDs with cobalt tetraamino-phthalocyanine (CoTAPc) has been successfully carried out. Several techniques such as time-resolved fluorescence measurements, thermal gravimetric analysis,transmissionelectronmicroscopy andspectrophotometric techniques were employed to characterize the nanoconjugates. Covalent binding of the QDs with CoTAPc resulted in the fluorescence quenching of the former. In the presence of varying concentrations of superoxide anion (O2 •−), the fluorescence of the QDs in the conjugate was gradually enhanced and the detection limits obtained were 2.1 and 2.4 nM for the smaller and larger QDs, respectively. Based on the excellent selectivity displayed by the nanoconjugates towards O2 •− over other biologically active species, a potential nanosensor was developed.
- Full Text:
- Date Issued: 2013
Fluorescence “switch on” of conjugates of CdTe@ ZnS quantum dots with Al, Ni and Zn tetraamino-phthalocyanines by hydrogen peroxide
- Adegoke, Oluwasesan, Khene, Samson M, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Khene, Samson M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241750 , vital:50966 , xlink:href="https://doi.org/10.1007/s10895-013-1222-x"
- Description: In this study, we have developed a novel nanoprobe for H2O2 based on the conjugation of CdTe@ZnS quantum dots (QDs) to different metal tetraamino-phthalocyanine (MTAPc): (M = (OAc)Al, {OAc = acetate}, Ni and Zn). Chemical coordination of the QDs to the MTAPc resulted in the fluorescence “switch off” of the linked QDs which was associated with Förster resonance energy transfer (FRET). In the presence of varying concentration of H2O2, the fluorescence of the linked QDs was progressively “switched on” and the FRET mechanism between the QDs and the MTAPc was disrupted. The sensitivity/limit of detection of the nanoprobe followed the order: QDs-ZnTAPc (2.2 μM) > QDs-NiTAPc (4.4 μM) > QDs-AlTAPc (9.8 μM) while the selectivity followed the order: QDs-NiTAPc > QDs-AlTAPc > QDs-ZnTAPc. The varying degree of sensitivity/selectivity and mechanism of detection is discussed in detail.
- Full Text:
- Date Issued: 2013
- Authors: Adegoke, Oluwasesan , Khene, Samson M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241750 , vital:50966 , xlink:href="https://doi.org/10.1007/s10895-013-1222-x"
- Description: In this study, we have developed a novel nanoprobe for H2O2 based on the conjugation of CdTe@ZnS quantum dots (QDs) to different metal tetraamino-phthalocyanine (MTAPc): (M = (OAc)Al, {OAc = acetate}, Ni and Zn). Chemical coordination of the QDs to the MTAPc resulted in the fluorescence “switch off” of the linked QDs which was associated with Förster resonance energy transfer (FRET). In the presence of varying concentration of H2O2, the fluorescence of the linked QDs was progressively “switched on” and the FRET mechanism between the QDs and the MTAPc was disrupted. The sensitivity/limit of detection of the nanoprobe followed the order: QDs-ZnTAPc (2.2 μM) > QDs-NiTAPc (4.4 μM) > QDs-AlTAPc (9.8 μM) while the selectivity followed the order: QDs-NiTAPc > QDs-AlTAPc > QDs-ZnTAPc. The varying degree of sensitivity/selectivity and mechanism of detection is discussed in detail.
- Full Text:
- Date Issued: 2013
CdTe quantum dots functionalized with 4-amino-2, 2, 6, 6-tetramethylpiperidine-N-oxide as luminescent nanoprobe for the sensitive recognition of bromide ion
- Adegoke, Oluwasesan, Hosten, Eric, McCleland, Cedric, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Hosten, Eric , McCleland, Cedric , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244393 , vital:51253 , xlink:href="https://doi.org/10.1016/j.aca.2012.01.040"
- Description: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.
- Full Text:
- Date Issued: 2012
- Authors: Adegoke, Oluwasesan , Hosten, Eric , McCleland, Cedric , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244393 , vital:51253 , xlink:href="https://doi.org/10.1016/j.aca.2012.01.040"
- Description: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.
- Full Text:
- Date Issued: 2012
Conjugation of mono-substituted phthalocyanine derivatives to CdSe@ ZnS quantum dots and their applications as fluorescent-based sensors
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189842 , vital:44936 , xlink:href="https://doi.org/10.1016/j.synthmet.2013.11.016"
- Description: Unsymmetrically substituted derivatives of aluminium amino phthalocyanines were synthesized for the first time, fully characterized and conjugated to CdSe@ZnS quantum dots (QDs). The conjugates were employed as fluorescence-based sensors for anion sensing. Among the anions that enhanced the fluorescence of the probe, fluoride ion was chosen as the test ion to test the efficacy of the probe. Förster resonance energy transfer from the QDs to the phthalocyanine was observed as an indication for the fluorescence quenching of the QDs upon binding to the phthalocyanine. The fluorescence of the linked QDs was progressively enhanced, and linearly proportional to increasing concentrations of fluoride ion. The type of substituent attached to the phthalocyanine ring influenced the efficiency of fluorescence enhancement. The proposed nanoprobe has been employed to detect fluoride ion in cell culture medium and tap water.
- Full Text:
- Date Issued: 2014
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189842 , vital:44936 , xlink:href="https://doi.org/10.1016/j.synthmet.2013.11.016"
- Description: Unsymmetrically substituted derivatives of aluminium amino phthalocyanines were synthesized for the first time, fully characterized and conjugated to CdSe@ZnS quantum dots (QDs). The conjugates were employed as fluorescence-based sensors for anion sensing. Among the anions that enhanced the fluorescence of the probe, fluoride ion was chosen as the test ion to test the efficacy of the probe. Förster resonance energy transfer from the QDs to the phthalocyanine was observed as an indication for the fluorescence quenching of the QDs upon binding to the phthalocyanine. The fluorescence of the linked QDs was progressively enhanced, and linearly proportional to increasing concentrations of fluoride ion. The type of substituent attached to the phthalocyanine ring influenced the efficiency of fluorescence enhancement. The proposed nanoprobe has been employed to detect fluoride ion in cell culture medium and tap water.
- Full Text:
- Date Issued: 2014
Effects of analytes on the fluorescence properties of CdTe@ ZnS quantum dots decorated with cobalt tetraamino-phthalocyanine
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189829 , vital:44935 , xlink:href="https://doi.org/10.1016/j.jlumin.2013.09.079"
- Description: In this work, we have carried out an investigation on the effects of different biologically active analytes on the fluorescence response of glutathione-capped CdTe@ZnS quantum dots (QDs)-colbalt tetraamino-phthalocyanine nanoconjugate system. Firstly, fluorescence quenching occurred. Experimental results showed that some analytes either “turned on”, others further quenched or showed no effect on the fluorescence emission of the nanoprobe.
- Full Text:
- Date Issued: 2014
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189829 , vital:44935 , xlink:href="https://doi.org/10.1016/j.jlumin.2013.09.079"
- Description: In this work, we have carried out an investigation on the effects of different biologically active analytes on the fluorescence response of glutathione-capped CdTe@ZnS quantum dots (QDs)-colbalt tetraamino-phthalocyanine nanoconjugate system. Firstly, fluorescence quenching occurred. Experimental results showed that some analytes either “turned on”, others further quenched or showed no effect on the fluorescence emission of the nanoprobe.
- Full Text:
- Date Issued: 2014
Unsymmetrically substituted nickel triazatetra-benzcorrole and phthalocynanine complexes
- Adegoke, Oluwasesan, Nyokong, Tebello
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189818 , vital:44934 , xlink:href="https://doi.org/10.1007/s10895-013-1317-4"
- Description: We report on the design and application of fluorescent nanoprobes based on the covalent linking of L-glutathione-capped CdSe@ZnS quantum dots (QDs) to newly synthesized unsymmetrically substituted nickel mercaptosuccinic acid triazatetra-benzcorrole (3) and phthalocyanine (4) complexes. Fluorescence quenching of the QDs occurred on conjugation to complexes 3 or 4. The nanoprobes were selectively screened in the presence of different cations and Hg2+ showed excellent affinity in “turning ON” the fluorescence of the nanoprobes. Experimental results showed that the sensitivity of QDs-4 towards Hg2+ was much higher than that of QDs-3 nanoprobe. The mechanism of reaction has been elucidated based on the ability of Hg2+ to coordinate with the sulphur atom of the Ni complex ring and apparently “turn ON” the fluorescence of the linked QDs.
- Full Text:
- Date Issued: 2014
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189818 , vital:44934 , xlink:href="https://doi.org/10.1007/s10895-013-1317-4"
- Description: We report on the design and application of fluorescent nanoprobes based on the covalent linking of L-glutathione-capped CdSe@ZnS quantum dots (QDs) to newly synthesized unsymmetrically substituted nickel mercaptosuccinic acid triazatetra-benzcorrole (3) and phthalocyanine (4) complexes. Fluorescence quenching of the QDs occurred on conjugation to complexes 3 or 4. The nanoprobes were selectively screened in the presence of different cations and Hg2+ showed excellent affinity in “turning ON” the fluorescence of the nanoprobes. Experimental results showed that the sensitivity of QDs-4 towards Hg2+ was much higher than that of QDs-3 nanoprobe. The mechanism of reaction has been elucidated based on the ability of Hg2+ to coordinate with the sulphur atom of the Ni complex ring and apparently “turn ON” the fluorescence of the linked QDs.
- Full Text:
- Date Issued: 2014