A capillary zone electrophoresis (CZE) method for the determination of cyclizine hydrochloride in tablets and suppositories
- Mohammadi, I, Kanfer, Isadore, Walker, Roderick B
- Authors: Mohammadi, I , Kanfer, Isadore , Walker, Roderick B
- Date: 2004
- Language: English
- Type: Article
- Identifier: vital:6406 , http://hdl.handle.net/10962/d1006479
- Description: Current compendial methods of assay for the analysis of cyclizine tablets involve the use of UV spectrophotometry. Since this is a non-selective technique its application to more complex dosage forms, such as suppositories, is unlikely to be appropriate. There is therefore a need for the development of a highly specific quantitative analytical method, such as high performance liquid chromatography (HPLC) or capillary electrophoresis (CE). The latter technique was chosen in view of some specific advantages over HPLC, such as the use of relatively non-toxic aqueous buffers, as opposed to organic solvents, which obviates the use of expensive HPLC grade solvents making CE more cost effective. Cyclizine was analyzed in 50 mM phosphate buffer (pH 2.3) and run at an applied voltage 25 kV. Detection sensitivity was enhanced by using a wavelength of 200 nm and samples were loaded hydrodynamically onto an uncoated fused-silica capillary (60 cm×50 mm i.d.). Chlorcyclizine was used as the internal standard and resolution of both compounds was achieved in less than 7 min. Stress testing was undertaken in order to investigate the appearance of breakdown products. The method has the requisite accuracy, selectivity, sensitivity and precision to assay cyclizine in tablets and suppositories. Degradation products resulting from the stress studies did not interfere with the detection of cyclizine and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2004
- Authors: Mohammadi, I , Kanfer, Isadore , Walker, Roderick B
- Date: 2004
- Language: English
- Type: Article
- Identifier: vital:6406 , http://hdl.handle.net/10962/d1006479
- Description: Current compendial methods of assay for the analysis of cyclizine tablets involve the use of UV spectrophotometry. Since this is a non-selective technique its application to more complex dosage forms, such as suppositories, is unlikely to be appropriate. There is therefore a need for the development of a highly specific quantitative analytical method, such as high performance liquid chromatography (HPLC) or capillary electrophoresis (CE). The latter technique was chosen in view of some specific advantages over HPLC, such as the use of relatively non-toxic aqueous buffers, as opposed to organic solvents, which obviates the use of expensive HPLC grade solvents making CE more cost effective. Cyclizine was analyzed in 50 mM phosphate buffer (pH 2.3) and run at an applied voltage 25 kV. Detection sensitivity was enhanced by using a wavelength of 200 nm and samples were loaded hydrodynamically onto an uncoated fused-silica capillary (60 cm×50 mm i.d.). Chlorcyclizine was used as the internal standard and resolution of both compounds was achieved in less than 7 min. Stress testing was undertaken in order to investigate the appearance of breakdown products. The method has the requisite accuracy, selectivity, sensitivity and precision to assay cyclizine in tablets and suppositories. Degradation products resulting from the stress studies did not interfere with the detection of cyclizine and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2004
The use of experimental design for the development of a capillary zone electrophoresis method for the quantitation of captopril
- Mukozhiwa, S Y, Khamanga, Sandile M, Walker, Roderick B
- Authors: Mukozhiwa, S Y , Khamanga, Sandile M , Walker, Roderick B
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183828 , vital:44073 , xlink:href="https://doi.org/10.1691/ph.2017.7071"
- Description: A capillary zone electrophoresis (CZE) method for the quantitation of captopril (CPT) using UV detection was developed. Influence of electrolyte concentration and system variables on electrophoretic separation was evaluated and a central composite design (CCD) was used to optimize the method. Variables investigated were pH, molarity, applied voltage and capillary length. The influence of sodium metabisulphite on the stability of test solutions was also investigated. The use of sodium metabisulphite prevented degradation of CPT over 24 hours. A fused uncoated silica capillary of 67.5cm total and 57.5 cm effective length was used for analysis. The applied voltage and capillary length affected the migration time of CPT significantly. A 20 mM phosphate buffer adjusted to pH 7.0 was used as running buffer and an applied voltage of 23.90 kV was suitable to effect a separation. The optimized electrophoretic conditions produced sharp, well-resolved peaks for CPT and sodium metabisulphite. Linear regression analysis of the response for CPT standards revealed the method was linear (R2 = 0.9995) over the range 5-70 μg/mL. The limits of quantitation and detection were 5 and 1.5 μg/mL. A simple, rapid and reliable CZE method has been developed and successfully applied to the analysis of commercially available CPT products.
- Full Text:
- Date Issued: 2017
- Authors: Mukozhiwa, S Y , Khamanga, Sandile M , Walker, Roderick B
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183828 , vital:44073 , xlink:href="https://doi.org/10.1691/ph.2017.7071"
- Description: A capillary zone electrophoresis (CZE) method for the quantitation of captopril (CPT) using UV detection was developed. Influence of electrolyte concentration and system variables on electrophoretic separation was evaluated and a central composite design (CCD) was used to optimize the method. Variables investigated were pH, molarity, applied voltage and capillary length. The influence of sodium metabisulphite on the stability of test solutions was also investigated. The use of sodium metabisulphite prevented degradation of CPT over 24 hours. A fused uncoated silica capillary of 67.5cm total and 57.5 cm effective length was used for analysis. The applied voltage and capillary length affected the migration time of CPT significantly. A 20 mM phosphate buffer adjusted to pH 7.0 was used as running buffer and an applied voltage of 23.90 kV was suitable to effect a separation. The optimized electrophoretic conditions produced sharp, well-resolved peaks for CPT and sodium metabisulphite. Linear regression analysis of the response for CPT standards revealed the method was linear (R2 = 0.9995) over the range 5-70 μg/mL. The limits of quantitation and detection were 5 and 1.5 μg/mL. A simple, rapid and reliable CZE method has been developed and successfully applied to the analysis of commercially available CPT products.
- Full Text:
- Date Issued: 2017
Improved Stability of Rifampicin in the Presence of Gastric-Resistant Isoniazid Microspheres in Acidic Media
- Mwila, Chiluba, Walker, Roderick B
- Authors: Mwila, Chiluba , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183210 , vital:43929 , xlink:href="https://doi.org/10.3390/pharmaceutics12030234"
- Description: The degradation of rifampicin (RIF) in an acidic medium to form 3-formyl rifamycin SV, a poorly absorbed compound, is accelerated in the presence of isoniazid, contributing to the poor bioavailability of rifampicin. This manuscript presents a novel approach in which isoniazid is formulated into gastric-resistant sustained-release microspheres and RIF into microporous floating sustained-release microspheres to reduce the potential for interaction between RIF and isoniazid (INH) in an acidic environment. Hydroxypropyl methylcellulose acetate succinate and Eudragit® L100 polymers were used for the manufacture of isoniazid-loaded gastric-resistant sustained-release microspheres using an o/o solvent emulsification evaporation approach. Microporous floating sustained-release microspheres for the delivery of rifampicin in the stomach were manufactured using emulsification and a diffusion/evaporation process. The design of experiments was used to evaluate the impact of input variables on predefined responses or quality attributes of the microspheres. The percent degradation of rifampicin following 12 h dissolution testing in 0.1 M HCl pH 1.2 in the presence of isoniazid gastric-resistant sustained-release microspheres was only 4.44%. These results indicate that the degradation of rifampicin in the presence of isoniazid in acidic media can be reduced by encapsulation of both active pharmaceutical ingredients to ensure release in different segments of the gastrointestinal tract, potentially improving the bioavailability of rifampicin.
- Full Text:
- Date Issued: 2020
- Authors: Mwila, Chiluba , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183210 , vital:43929 , xlink:href="https://doi.org/10.3390/pharmaceutics12030234"
- Description: The degradation of rifampicin (RIF) in an acidic medium to form 3-formyl rifamycin SV, a poorly absorbed compound, is accelerated in the presence of isoniazid, contributing to the poor bioavailability of rifampicin. This manuscript presents a novel approach in which isoniazid is formulated into gastric-resistant sustained-release microspheres and RIF into microporous floating sustained-release microspheres to reduce the potential for interaction between RIF and isoniazid (INH) in an acidic environment. Hydroxypropyl methylcellulose acetate succinate and Eudragit® L100 polymers were used for the manufacture of isoniazid-loaded gastric-resistant sustained-release microspheres using an o/o solvent emulsification evaporation approach. Microporous floating sustained-release microspheres for the delivery of rifampicin in the stomach were manufactured using emulsification and a diffusion/evaporation process. The design of experiments was used to evaluate the impact of input variables on predefined responses or quality attributes of the microspheres. The percent degradation of rifampicin following 12 h dissolution testing in 0.1 M HCl pH 1.2 in the presence of isoniazid gastric-resistant sustained-release microspheres was only 4.44%. These results indicate that the degradation of rifampicin in the presence of isoniazid in acidic media can be reduced by encapsulation of both active pharmaceutical ingredients to ensure release in different segments of the gastrointestinal tract, potentially improving the bioavailability of rifampicin.
- Full Text:
- Date Issued: 2020
Development and assessment of a USP Apparatus 3 dissolution test method for sustained-release Nevirapine matrix tablets
- Mwila, Chiluba, Khamanga, Sandile M M, Walker, Roderick B
- Authors: Mwila, Chiluba , Khamanga, Sandile M M , Walker, Roderick B
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184779 , vital:44271 , xlink:href="https://doi.org/10.14227/dt230316p22"
- Description: Dissolution testing is a quality control tool used to assess batch-to-batch performance of dosage forms, thereby providing continued assurance of product quality. Analytical methods for the assessment of pharmaceutical product quality must be validated according to regulatory guidelines to ensure that tests are reliable and valid. Agitation rate, mesh pore size, surfactant concentration, and dissolution medium molarity are experimental parameters that may affect nevirapine (NVP) release and were investigated and optimized to ensure that consistent, reliable, and valid results using Apparatus 3 were produced. Agitation rate was investigated to establish an equivalent response to that observed for NVP release using Apparatus 2 at 50 rpm. A reciprocation rate of 5–10 dpm produced dissolution profiles that were similar to those observed using Apparatus 2. An increase in the molarity of the dissolution medium slightly increased the release rate of NVP, and a 50 mM buffer maintained at pH values mimicking gastrointestinal tract (GIT) conditions was selected for all experiments. With the addition of 2% sodium lauryl sulfate (SLS) to the dissolution medium, >80% NVP was released from the tablets over the test period. The NVP release rate increased with an increase in the mesh pore size; however, the extent of release was not affected by this parameter. Dissolution test samples were analyzed using HPLC, and dissolution methods were validated for NVP stability in the dissolution medium, specificity, linearity and range, repeatability, intermediate precision, and accuracy as defined by ICH. The dissolution method used for testing NVP tablets can be regarded as an appropriate tool for the evaluation of sustained-release (SR) NVP formulations and the impact of formulation composition and product quality attributes on drug release.
- Full Text:
- Date Issued: 2016
- Authors: Mwila, Chiluba , Khamanga, Sandile M M , Walker, Roderick B
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184779 , vital:44271 , xlink:href="https://doi.org/10.14227/dt230316p22"
- Description: Dissolution testing is a quality control tool used to assess batch-to-batch performance of dosage forms, thereby providing continued assurance of product quality. Analytical methods for the assessment of pharmaceutical product quality must be validated according to regulatory guidelines to ensure that tests are reliable and valid. Agitation rate, mesh pore size, surfactant concentration, and dissolution medium molarity are experimental parameters that may affect nevirapine (NVP) release and were investigated and optimized to ensure that consistent, reliable, and valid results using Apparatus 3 were produced. Agitation rate was investigated to establish an equivalent response to that observed for NVP release using Apparatus 2 at 50 rpm. A reciprocation rate of 5–10 dpm produced dissolution profiles that were similar to those observed using Apparatus 2. An increase in the molarity of the dissolution medium slightly increased the release rate of NVP, and a 50 mM buffer maintained at pH values mimicking gastrointestinal tract (GIT) conditions was selected for all experiments. With the addition of 2% sodium lauryl sulfate (SLS) to the dissolution medium, >80% NVP was released from the tablets over the test period. The NVP release rate increased with an increase in the mesh pore size; however, the extent of release was not affected by this parameter. Dissolution test samples were analyzed using HPLC, and dissolution methods were validated for NVP stability in the dissolution medium, specificity, linearity and range, repeatability, intermediate precision, and accuracy as defined by ICH. The dissolution method used for testing NVP tablets can be regarded as an appropriate tool for the evaluation of sustained-release (SR) NVP formulations and the impact of formulation composition and product quality attributes on drug release.
- Full Text:
- Date Issued: 2016
Electro‐oxidation of acetaminophen on nickel/poly (o‐aminophenol)/multi‐walled carbon nanotube nanocomposite modified graphite electrode.
- Naeemy, Ali, Mohammadi, Ali, Bakhtiari, Hediech, Ashouri, Nasim, Walker, Roderick B
- Authors: Naeemy, Ali , Mohammadi, Ali , Bakhtiari, Hediech , Ashouri, Nasim , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184107 , vital:44173 , xlink:href="https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/mnl.2014.0197"
- Description: Poly(o-aminophenol) (POAP)/multi-walled carbon nanotube (MWCNT) nanocomposite and POAP in the absence of the MWCNT were fabricated by consecutive cyclic voltammetry (CV) on a graphite (G) electrode. The dispersion of nickel (II) ions was accomplished and incorporated into the polymeric electrodes (G/POAP and G/POAP-MWCNT) by immersing them into a 0.1 M nickel (II) solution. Following preparation of G/POAP/Ni and G/POAP-MWCNT/Ni, the electrochemical behaviour was examined using CV. Scanning electron microscopy was used for characterisation of the nanocomposite. The prepared electrodes showed enhanced electrocatalytic activity for the oxidation of acetaminophen and facilitated the detection of acetaminophen in a 0.1 M NaOH solution. Compared with the G/POAP/Ni electrode, the G/POAP-MWCNT/Ni electrode had a significant current response of acetaminophen oxidation because of the synergistic effects of POAP and the MWCNT. By CV, the calibration plot was linear in the range of 1–13 mM with standard deviation between 0.3 and 6.54% for acetaminophen. The G/POAP-MWCNT/Ni was successfully applied for acetaminophen determination in tablets and the results showed sufficient precision and achieved a mean recovery of 96.8% (R.S.D. = 4.9%).
- Full Text:
- Date Issued: 2014
- Authors: Naeemy, Ali , Mohammadi, Ali , Bakhtiari, Hediech , Ashouri, Nasim , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184107 , vital:44173 , xlink:href="https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/mnl.2014.0197"
- Description: Poly(o-aminophenol) (POAP)/multi-walled carbon nanotube (MWCNT) nanocomposite and POAP in the absence of the MWCNT were fabricated by consecutive cyclic voltammetry (CV) on a graphite (G) electrode. The dispersion of nickel (II) ions was accomplished and incorporated into the polymeric electrodes (G/POAP and G/POAP-MWCNT) by immersing them into a 0.1 M nickel (II) solution. Following preparation of G/POAP/Ni and G/POAP-MWCNT/Ni, the electrochemical behaviour was examined using CV. Scanning electron microscopy was used for characterisation of the nanocomposite. The prepared electrodes showed enhanced electrocatalytic activity for the oxidation of acetaminophen and facilitated the detection of acetaminophen in a 0.1 M NaOH solution. Compared with the G/POAP/Ni electrode, the G/POAP-MWCNT/Ni electrode had a significant current response of acetaminophen oxidation because of the synergistic effects of POAP and the MWCNT. By CV, the calibration plot was linear in the range of 1–13 mM with standard deviation between 0.3 and 6.54% for acetaminophen. The G/POAP-MWCNT/Ni was successfully applied for acetaminophen determination in tablets and the results showed sufficient precision and achieved a mean recovery of 96.8% (R.S.D. = 4.9%).
- Full Text:
- Date Issued: 2014
Co-encapsulation of rifampicin and isoniazid in crude soybean lecithin liposomes
- Nkanga, Christian I, Noundou, Xavier S, Walker, Roderick B, Krause, Rui W M
- Authors: Nkanga, Christian I , Noundou, Xavier S , Walker, Roderick B , Krause, Rui W M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183536 , vital:44005 , xlink:href="https://doi.org/10.17159/0379-4350/2019/v72a11"
- Description: Despite the well-known anti-mycobacterial actions of isoniazid (INH) and rifampicin (RIF), the clinical success of tuberculosis (TB) therapy requires prolonged administration of multiple drugs in high doses, which often result in frequent adverse effects and low patient adherence. Although liposomes are promising candidates for controlled delivery of anti-TB drug, the high cost of synthetic and highly purified natural lipids currently used in liposomal technology might preclude the universal application of therapeutic liposomes. This work aimed at evaluating the potential of a cost-effective lipid material, crude soybean lecithin (CL), to co-encapsulate RIF and INH for liposomal dual delivery. RIF was encapsulated in CL-liposomes with/without cholesterol using film hydration method, after which INH was incorporated using a freeze–thawing technique. Dynamic light scattering, differential scanning calorimetry, X-ray diffraction and dialysis were used for liposome characterization. Liposomes containing CL alone (CLL) exhibited 90%encapsulation efficiency for RIF and 59%for INH. The mean size and surface charge of CLL were 1114nm and –63mV, respectively. In addition, CLL showed a controlled release profile for the co-encapsulated drugs. CLL would be promising vehicles for macrophage-targeting drug delivery. The present findings demonstrate the feasibility of using CL for preparation of combination products for liposomal delivery.
- Full Text:
- Date Issued: 2019
- Authors: Nkanga, Christian I , Noundou, Xavier S , Walker, Roderick B , Krause, Rui W M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183536 , vital:44005 , xlink:href="https://doi.org/10.17159/0379-4350/2019/v72a11"
- Description: Despite the well-known anti-mycobacterial actions of isoniazid (INH) and rifampicin (RIF), the clinical success of tuberculosis (TB) therapy requires prolonged administration of multiple drugs in high doses, which often result in frequent adverse effects and low patient adherence. Although liposomes are promising candidates for controlled delivery of anti-TB drug, the high cost of synthetic and highly purified natural lipids currently used in liposomal technology might preclude the universal application of therapeutic liposomes. This work aimed at evaluating the potential of a cost-effective lipid material, crude soybean lecithin (CL), to co-encapsulate RIF and INH for liposomal dual delivery. RIF was encapsulated in CL-liposomes with/without cholesterol using film hydration method, after which INH was incorporated using a freeze–thawing technique. Dynamic light scattering, differential scanning calorimetry, X-ray diffraction and dialysis were used for liposome characterization. Liposomes containing CL alone (CLL) exhibited 90%encapsulation efficiency for RIF and 59%for INH. The mean size and surface charge of CLL were 1114nm and –63mV, respectively. In addition, CLL showed a controlled release profile for the co-encapsulated drugs. CLL would be promising vehicles for macrophage-targeting drug delivery. The present findings demonstrate the feasibility of using CL for preparation of combination products for liposomal delivery.
- Full Text:
- Date Issued: 2019
Co-loading of isoniazid-grafted phthalocyanine-in-cyclodextrin and rifampicin in crude soybean lecithin liposomes: Formulation, spectroscopic and biological characterization
- Nkanga, Christian I, Roth, Michael, Walker, Roderick B, Noundou, Xavier S, Krause, Rui W M
- Authors: Nkanga, Christian I , Roth, Michael , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183481 , vital:43999 , xlink:href="https://doi.org/10.1166/jbn.2020.2880"
- Description: An inclusion complex of isoniazid-grafted phthalocyanine with gamma-cyclodextrin (Complex) was co-encapsulated with rifampicin (RIF) in crude soybean lecithin liposomes using a heating method. The encapsulation efficiency (%EE) of the Complex-RIF co-loaded liposomes (Rif-Complex-Lips) was determined using UV-Vis spectrophotometry. Rif-Complex-Lips formulations were evaluated using dynamic light scattering, transmission electron microscopy (TEM), 1H-NMR, absorption and emission spectroscopy. Dialysis was used for drug release study in two different media, pH 6.4 and 7.4. HeLa cells were used to assess potential cytotoxicity, and the uptake by lung fibroblasts and epithelial cells was investigated using fluorescence microscopy. The particle size and Zeta potential of Rif-Complex-Lips were approximately 594 nm and –50 mV. Spectroscopic analyses demonstrated molecular distribution of the cargo within the lipid core, and encapsulation efficiency of 58% for Complex and 86% for RIF. TEM analysis unveiled the existence of spherical nanoparticles in our samples, indicating the presence of liposomes. Rif-Complex-Lips exhibited much higher release rates for both INH and RIF at pH 6.4 compared to those tested at pH 7.4. In addition, there was no cytotoxicity on HeLa cells, but remarkable Rif-Complex-Lips internalization by peripheral lung fibroblasts and epithelial cells. Hence, Rif-Complex-Lips are promising vehicles for intracellular delivery of antimicrobial drugs.
- Full Text:
- Date Issued: 2020
- Authors: Nkanga, Christian I , Roth, Michael , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183481 , vital:43999 , xlink:href="https://doi.org/10.1166/jbn.2020.2880"
- Description: An inclusion complex of isoniazid-grafted phthalocyanine with gamma-cyclodextrin (Complex) was co-encapsulated with rifampicin (RIF) in crude soybean lecithin liposomes using a heating method. The encapsulation efficiency (%EE) of the Complex-RIF co-loaded liposomes (Rif-Complex-Lips) was determined using UV-Vis spectrophotometry. Rif-Complex-Lips formulations were evaluated using dynamic light scattering, transmission electron microscopy (TEM), 1H-NMR, absorption and emission spectroscopy. Dialysis was used for drug release study in two different media, pH 6.4 and 7.4. HeLa cells were used to assess potential cytotoxicity, and the uptake by lung fibroblasts and epithelial cells was investigated using fluorescence microscopy. The particle size and Zeta potential of Rif-Complex-Lips were approximately 594 nm and –50 mV. Spectroscopic analyses demonstrated molecular distribution of the cargo within the lipid core, and encapsulation efficiency of 58% for Complex and 86% for RIF. TEM analysis unveiled the existence of spherical nanoparticles in our samples, indicating the presence of liposomes. Rif-Complex-Lips exhibited much higher release rates for both INH and RIF at pH 6.4 compared to those tested at pH 7.4. In addition, there was no cytotoxicity on HeLa cells, but remarkable Rif-Complex-Lips internalization by peripheral lung fibroblasts and epithelial cells. Hence, Rif-Complex-Lips are promising vehicles for intracellular delivery of antimicrobial drugs.
- Full Text:
- Date Issued: 2020
Preparation and characterization of isoniazid-loaded crude soybean lecithin liposomes
- Nkanga, Christian I, Isaacs, Michelle, Noundou, Xavier S, Krause, Rui W M, Walker, Roderick B
- Authors: Nkanga, Christian I , Isaacs, Michelle , Noundou, Xavier S , Krause, Rui W M , Walker, Roderick B
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125654 , vital:35804 , https://doi.org/10.1016/j.ijpharm.2017.04.074
- Description: Unexpected substituent-dependent regioselectivty challenges in the synthesis of C-benzylated (N-arylcarbamoyl)phosphonate esters have been resolved. The C-benzylated N-furfurylcarbamoyl derivative showed low micromolar PfLDH inhibition, while one of the C-benzylated N-arylcarbamoyl analogues was active against Nagana Trypanosoma brucei parasites which are responsible for African trypanosomiasis in cattle.
- Full Text:
- Date Issued: 2017
- Authors: Nkanga, Christian I , Isaacs, Michelle , Noundou, Xavier S , Krause, Rui W M , Walker, Roderick B
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125654 , vital:35804 , https://doi.org/10.1016/j.ijpharm.2017.04.074
- Description: Unexpected substituent-dependent regioselectivty challenges in the synthesis of C-benzylated (N-arylcarbamoyl)phosphonate esters have been resolved. The C-benzylated N-furfurylcarbamoyl derivative showed low micromolar PfLDH inhibition, while one of the C-benzylated N-arylcarbamoyl analogues was active against Nagana Trypanosoma brucei parasites which are responsible for African trypanosomiasis in cattle.
- Full Text:
- Date Issued: 2017
Design, evaluation and optimization of taste masked clarithromycin powder
- Ntemi, Pascal V, Walker, Roderick B, Khamanga, Sandile M
- Authors: Ntemi, Pascal V , Walker, Roderick B , Khamanga, Sandile M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183503 , vital:44001 , xlink:href="https://doi.org/10.1691/ph.2019.8116"
- Description: Clarithromycin (CLA) is an extremely bitter macrolide antibiotic used to treat paediatric and adult infections. The bitter taste affects patient adherence and may compromise therapy. This research developed a taste masked CLA resinate using Indion® 234, a weak acidic cation exchange resin. The factors affecting formation of the CLA-resin complex were assessed. Design of experiments was used to optimize response while evaluating input variables such as temperature, CLA-resin ratio,stirring time and pH. CLA loading efficiency was determined spectrophotometrically and CLA release using USP Apparatus II. Differential Scanning Calorimetry (DSC), Scanning Electron Microscop (SEM), Fourier Transform Infrared (FT-IR) Spectroscopy and X-ray Diffraction (XRD) were used to confirm complex formation. A spectrophotometric method was used to assess taste evaluation. The optimum CLA-resin ratio, temperature, and stirring time were 1:4, 80 °C, 3 hours, respectively, at pH 8. Characterization techniques revealed that CLA was crystalline and the complex amorphous in nature. FT-IR spectra of resinate revealed the absence of resonance due to the tertiary amine functional group that is responsible for the bitter taste of CLA. CLA was stable in simulated salivary fluid and was released within 3 hours in gastric fluid. All CLAresin batches revealed complete taste masking. Taste analysis highlighted the improvement of taste masking properties of the resinate as the CLA to resin ratio, increased.
- Full Text:
- Date Issued: 2019
- Authors: Ntemi, Pascal V , Walker, Roderick B , Khamanga, Sandile M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183503 , vital:44001 , xlink:href="https://doi.org/10.1691/ph.2019.8116"
- Description: Clarithromycin (CLA) is an extremely bitter macrolide antibiotic used to treat paediatric and adult infections. The bitter taste affects patient adherence and may compromise therapy. This research developed a taste masked CLA resinate using Indion® 234, a weak acidic cation exchange resin. The factors affecting formation of the CLA-resin complex were assessed. Design of experiments was used to optimize response while evaluating input variables such as temperature, CLA-resin ratio,stirring time and pH. CLA loading efficiency was determined spectrophotometrically and CLA release using USP Apparatus II. Differential Scanning Calorimetry (DSC), Scanning Electron Microscop (SEM), Fourier Transform Infrared (FT-IR) Spectroscopy and X-ray Diffraction (XRD) were used to confirm complex formation. A spectrophotometric method was used to assess taste evaluation. The optimum CLA-resin ratio, temperature, and stirring time were 1:4, 80 °C, 3 hours, respectively, at pH 8. Characterization techniques revealed that CLA was crystalline and the complex amorphous in nature. FT-IR spectra of resinate revealed the absence of resonance due to the tertiary amine functional group that is responsible for the bitter taste of CLA. CLA was stable in simulated salivary fluid and was released within 3 hours in gastric fluid. All CLAresin batches revealed complete taste masking. Taste analysis highlighted the improvement of taste masking properties of the resinate as the CLA to resin ratio, increased.
- Full Text:
- Date Issued: 2019
Encapsulation and physicochemical evaluation of efavirenz in liposomes
- Okafor, Nnamdi Ikemefuna, Nkanga, Christian I, Walker, Roderick B, Noundou, Xavier S, Krause, Rui W M
- Authors: Okafor, Nnamdi Ikemefuna , Nkanga, Christian I , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183414 , vital:43988 , xlink:href="https://doi.org/10.1007/s40005-019-00458-8"
- Description: Antiretroviral therapy remains the most efective means of managing the human immune defciency virus/acquired immune defciency syndrome (HIV/AIDS). Application of therapeutics has been hampered by factors including poor bioavailability of most anti-retroviral compounds (ARV), side efects and an alarming emergence of drug resistant strains of the virus. Recent developments and use of drug delivery systems (DDS) has shown potential for improving the pharmacological profle of ARV. Amongst these complex DDS, liposomes have been explored for delivery of ARV. In this study, we have aimed at exploring efcient encapsulation of efavirenz (EFV), a potent ARV using diferent mass ratios of crude soybean lecithin and cholesterol. The EFV-loaded liposomes (EFL) were prepared using thin flm hydration and evaluated for particle size, zeta potential (ZP), encapsulation efciency (EE%), morphology and drug release studies. Diferential scanning calorimetry (DSC), X-ray difraction (XRD), energy dispersity spectroscopy (EDS) and Fourier transform infrared (FTIR) spectroscopy were used for comprehensive physicochemical characterization of EFL. EFL exhibited high encapsulation (99%) in 1:1 crude lecithin to cholesterol mass ratio. The average particle size and Zeta Potential of EFL were found to be 411.10±7.40 nm and −53.5.3±0.06 mV, respectively. EFL showed a relatively controlled EFV release behaviour that was similar to the dissolution profle of un-encapsulated EFV. This suggests that EFL represents a promising vehicle for efective EFV delivery while providing the advantages of a nano-scaled delivery system
- Full Text:
- Date Issued: 2020
- Authors: Okafor, Nnamdi Ikemefuna , Nkanga, Christian I , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183414 , vital:43988 , xlink:href="https://doi.org/10.1007/s40005-019-00458-8"
- Description: Antiretroviral therapy remains the most efective means of managing the human immune defciency virus/acquired immune defciency syndrome (HIV/AIDS). Application of therapeutics has been hampered by factors including poor bioavailability of most anti-retroviral compounds (ARV), side efects and an alarming emergence of drug resistant strains of the virus. Recent developments and use of drug delivery systems (DDS) has shown potential for improving the pharmacological profle of ARV. Amongst these complex DDS, liposomes have been explored for delivery of ARV. In this study, we have aimed at exploring efcient encapsulation of efavirenz (EFV), a potent ARV using diferent mass ratios of crude soybean lecithin and cholesterol. The EFV-loaded liposomes (EFL) were prepared using thin flm hydration and evaluated for particle size, zeta potential (ZP), encapsulation efciency (EE%), morphology and drug release studies. Diferential scanning calorimetry (DSC), X-ray difraction (XRD), energy dispersity spectroscopy (EDS) and Fourier transform infrared (FTIR) spectroscopy were used for comprehensive physicochemical characterization of EFL. EFL exhibited high encapsulation (99%) in 1:1 crude lecithin to cholesterol mass ratio. The average particle size and Zeta Potential of EFL were found to be 411.10±7.40 nm and −53.5.3±0.06 mV, respectively. EFL showed a relatively controlled EFV release behaviour that was similar to the dissolution profle of un-encapsulated EFV. This suggests that EFL represents a promising vehicle for efective EFV delivery while providing the advantages of a nano-scaled delivery system
- Full Text:
- Date Issued: 2020
Evaluation of the kinetics and mechanism of drug release from Econazole nitrate nanosponge loaded Carbapol Hydrogel
- Sharma, Renuka, Walker, Roderick B, Pathak, Kamla
- Authors: Sharma, Renuka , Walker, Roderick B , Pathak, Kamla
- Date: 2011
- Language: English
- Type: text , Article
- Identifier: vital:6437 , http://hdl.handle.net/10962/d1006614
- Description: The objective of this study was to investigate the mechanism of release of econazole nitrate (EN) nanosponges loaded hydrogel and to compare it with EN hydrogel so as to develop an extended release topical drug delivery system of EN. Nanosponges of EN were prepared using ethyl cellulose and PVA by emulsion solvent evaporation method. On the basis of pharmacotechnical evaluation nanosponges with least particle size of 230.1 nm and good rheological properties were formulated as hydrogel (F1 – F7). In vitro drug release data of EN nanosponges loaded hydrogels in phosphate buffer pH 6.8 and 7.4 when analysed by GraphPad Prism software version 4.0 San Diego, USA best fitted the Makoid-2 Banakar model (R value greater than 0.98). The Korsmeyer-Peppas release exponent (n) ranged between 0.331 – 0.418, which confirmed diffusion as the principle mechanism of drug release. The release mechanism was further confirmed by calculating the ratio of exponents A/B ratio derived from the Kopcha model.
- Full Text:
- Date Issued: 2011
- Authors: Sharma, Renuka , Walker, Roderick B , Pathak, Kamla
- Date: 2011
- Language: English
- Type: text , Article
- Identifier: vital:6437 , http://hdl.handle.net/10962/d1006614
- Description: The objective of this study was to investigate the mechanism of release of econazole nitrate (EN) nanosponges loaded hydrogel and to compare it with EN hydrogel so as to develop an extended release topical drug delivery system of EN. Nanosponges of EN were prepared using ethyl cellulose and PVA by emulsion solvent evaporation method. On the basis of pharmacotechnical evaluation nanosponges with least particle size of 230.1 nm and good rheological properties were formulated as hydrogel (F1 – F7). In vitro drug release data of EN nanosponges loaded hydrogels in phosphate buffer pH 6.8 and 7.4 when analysed by GraphPad Prism software version 4.0 San Diego, USA best fitted the Makoid-2 Banakar model (R value greater than 0.98). The Korsmeyer-Peppas release exponent (n) ranged between 0.331 – 0.418, which confirmed diffusion as the principle mechanism of drug release. The release mechanism was further confirmed by calculating the ratio of exponents A/B ratio derived from the Kopcha model.
- Full Text:
- Date Issued: 2011
An assessment of the efficacy of two lysine microencapsulation techniques to determine the quantitative lysine requirement of the South African abalone, Haliotis midae L
- Shipton, Thomas A, Britz, Peter J, Walker, Roderick B
- Authors: Shipton, Thomas A , Britz, Peter J , Walker, Roderick B
- Date: 2002
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184289 , vital:44197 , xlink:href="https://doi.org/10.1046/j.1365-2095.2002.00204.x"
- Description: The quantification of the essential amino acid requirements of a species is a prerequisite to the formulation of biologically optimized diets. In this study, crystalline L-lysine was used in an attempt to determine the quantitative lysine requirement of juvenile Haliotis midae. Two microencapsulation techniques [gelatine/acacia and cellulose acetate phthalate (CAP)] were used to retard leaching of crystalline L-lysine incorporated into semipurified test diets. An assessment of the efficacy of the encapsulation techniques, revealed that despite effective lysine supplementation, H. midae fed semipurified test diets containing encapsulated crystalline L-lysine failed to promote significant improvements in either growth, feed or protein efficiency (P > 0.05). The failure of the crystalline L-lysine to illicit growth and nutritional responses is discussed.
- Full Text:
- Date Issued: 2002
- Authors: Shipton, Thomas A , Britz, Peter J , Walker, Roderick B
- Date: 2002
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184289 , vital:44197 , xlink:href="https://doi.org/10.1046/j.1365-2095.2002.00204.x"
- Description: The quantification of the essential amino acid requirements of a species is a prerequisite to the formulation of biologically optimized diets. In this study, crystalline L-lysine was used in an attempt to determine the quantitative lysine requirement of juvenile Haliotis midae. Two microencapsulation techniques [gelatine/acacia and cellulose acetate phthalate (CAP)] were used to retard leaching of crystalline L-lysine incorporated into semipurified test diets. An assessment of the efficacy of the encapsulation techniques, revealed that despite effective lysine supplementation, H. midae fed semipurified test diets containing encapsulated crystalline L-lysine failed to promote significant improvements in either growth, feed or protein efficiency (P > 0.05). The failure of the crystalline L-lysine to illicit growth and nutritional responses is discussed.
- Full Text:
- Date Issued: 2002
Evaluation of the proposed FDA pilot-dose response methodology for topical corticosteroid bioeqivalence testing [authors' reply in Letters to the Editor]
- Smith, Eric W, Walker, Roderick B, Haigh, John M, Kanfer, Isadore
- Authors: Smith, Eric W , Walker, Roderick B , Haigh, John M , Kanfer, Isadore
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6423 , http://hdl.handle.net/10962/d1006558
- Description: Reply to: Letter to the Editor by Singh GJ; Fleischer N; Lesko L; Williams R - relating to original article in Pharmaceutical Research (USA), Mar 1997, vol. 14, pp. 303-308.
- Full Text: false
- Date Issued: 1998
- Authors: Smith, Eric W , Walker, Roderick B , Haigh, John M , Kanfer, Isadore
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6423 , http://hdl.handle.net/10962/d1006558
- Description: Reply to: Letter to the Editor by Singh GJ; Fleischer N; Lesko L; Williams R - relating to original article in Pharmaceutical Research (USA), Mar 1997, vol. 14, pp. 303-308.
- Full Text: false
- Date Issued: 1998
Analysis of chromameter results obtained from corticosteroid-induced skin blanching. I. Manipulation of data
- Smith, Eric W, Haigh, John M, Walker, Roderick B
- Authors: Smith, Eric W , Haigh, John M , Walker, Roderick B
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6424 , http://hdl.handle.net/10962/d1006559
- Description: Purpose. One of the unresolved issues in the FDA Guidance document for topical corticosteroid bioequivalence testing is the method of manipulation suggested for the chromameter data. The purpose of this study was to manipulate the instrumental data from a typical blanching study in a number of ways to investigate the appropriateness of these procedures for comparison with the subjective visually-assessed results. Methods. The human skin blanching assay methodology routinely practiced in our laboratories was utilised and the vasoconstriction produced by two corticosteroid formulations of different potency was assessed visually and instrumentally by use of a Minolta chromameter. The instrumental data were corrected for zero-time and unmedicated site readings. In addition, Euclidean distances were calculated using all data generated by the instrument. Results. Individually the a-, b- and L-scale chromameter values are imprecise and there is negligible vasoconstriction response recorded for the moderately potent formulation. Arithmetical manipulation of the data as suggested by the FDA does not appear to improve the quality of the data in any way. Euclidean distance analysis more closely resembles the visual data and appears to have better precision. Conclusions. It is clear that mathematical correction of chromameter data is unnecessary, especially since the instrumental data are extremely imprecise. Furthermore, the assessment of each individual chromameter index does not adequately characterise the blanching response profile. It is therefore suggested that Euclidean distance may be a better measure on which to base an analysis of bioequivalence than the truncated data set methodology currently suggested by the FDA.
- Full Text: false
- Date Issued: 1998
- Authors: Smith, Eric W , Haigh, John M , Walker, Roderick B
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6424 , http://hdl.handle.net/10962/d1006559
- Description: Purpose. One of the unresolved issues in the FDA Guidance document for topical corticosteroid bioequivalence testing is the method of manipulation suggested for the chromameter data. The purpose of this study was to manipulate the instrumental data from a typical blanching study in a number of ways to investigate the appropriateness of these procedures for comparison with the subjective visually-assessed results. Methods. The human skin blanching assay methodology routinely practiced in our laboratories was utilised and the vasoconstriction produced by two corticosteroid formulations of different potency was assessed visually and instrumentally by use of a Minolta chromameter. The instrumental data were corrected for zero-time and unmedicated site readings. In addition, Euclidean distances were calculated using all data generated by the instrument. Results. Individually the a-, b- and L-scale chromameter values are imprecise and there is negligible vasoconstriction response recorded for the moderately potent formulation. Arithmetical manipulation of the data as suggested by the FDA does not appear to improve the quality of the data in any way. Euclidean distance analysis more closely resembles the visual data and appears to have better precision. Conclusions. It is clear that mathematical correction of chromameter data is unnecessary, especially since the instrumental data are extremely imprecise. Furthermore, the assessment of each individual chromameter index does not adequately characterise the blanching response profile. It is therefore suggested that Euclidean distance may be a better measure on which to base an analysis of bioequivalence than the truncated data set methodology currently suggested by the FDA.
- Full Text: false
- Date Issued: 1998
Application of quality by design principles for optimizing process variables of Extrusion and Spheronization of a Captopril Pellet Formulation:
- Veerubhotla, Krishna, Walker, Roderick B
- Authors: Veerubhotla, Krishna , Walker, Roderick B
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/178312 , vital:40098 , DOI: 10.36468/pharmaceutical-sciences.624
- Description: Product development using quality by design is a proactive and risk-based approach that shifts the manufacturing process from empirical to science-based. Risk assessment was performed to identify and analyse risk areas for the manufacture of captopril pellets. Twelve experimental runs were performed using a Plackett-Burman screening design. Pareto plots revealed the effect of formulation and process variables on the responses monitored and facilitated the identification of the most critical parameters for optimization of the formulation. A response surface methodology approach in conjunction with a central composite design was used to optimize the Eudragit® RL 30D (15-30 ml), microcrystalline cellulose (20-40 % w/w), sodium starch glycolate (2-5 % w/w) and spheronizer speed (650-1050 rpm).
- Full Text:
- Date Issued: 2020
- Authors: Veerubhotla, Krishna , Walker, Roderick B
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/178312 , vital:40098 , DOI: 10.36468/pharmaceutical-sciences.624
- Description: Product development using quality by design is a proactive and risk-based approach that shifts the manufacturing process from empirical to science-based. Risk assessment was performed to identify and analyse risk areas for the manufacture of captopril pellets. Twelve experimental runs were performed using a Plackett-Burman screening design. Pareto plots revealed the effect of formulation and process variables on the responses monitored and facilitated the identification of the most critical parameters for optimization of the formulation. A response surface methodology approach in conjunction with a central composite design was used to optimize the Eudragit® RL 30D (15-30 ml), microcrystalline cellulose (20-40 % w/w), sodium starch glycolate (2-5 % w/w) and spheronizer speed (650-1050 rpm).
- Full Text:
- Date Issued: 2020
Development and Validation of a Stability-indicating RP-HPLC Method Using Quality by Design for Estimating Captopril
- Veerubhotla, Krishna, Walker, Roderick B
- Authors: Veerubhotla, Krishna , Walker, Roderick B
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183525 , vital:44003 , xlink:href="10.4172/pharmaceutical-sciences.1000478"
- Description: The applicability of a quality by design framework for the development of a sensitive, simple and selective, stability-indicating reversed-phase high-performance liquid chromatography analytical method for the analysis of captopril was investigated. Design of experiments using a central composite design approach was used for method development. Twenty experimental runs were performed with acetonitrile content ranging between 28 and 36 % v/v, pH from 2.8 to 3.6 and temperature between 22° and 32°. The experimental data obtained was used to derive a quadratic model for the retention time of captopril. The optimized method produced sharp peaks with good resolution (>2) for captopril and the internal standard with retention times of 3.1 and 6.2 min, respectively. The experimental data revealed that acetonitrile content in the mobile phase and pH are significant factors that affect the retention time and resolution of captopril. Normal probability plots revealed that the residual and predicted data fall approximately on a straight line, indicating that the experimental error for these studies was evenly distributed suggesting that the model could be used to navigate the design space. This approach is useful to expedite method development and optimization activities in analytical laboratories.
- Full Text:
- Date Issued: 2019
- Authors: Veerubhotla, Krishna , Walker, Roderick B
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183525 , vital:44003 , xlink:href="10.4172/pharmaceutical-sciences.1000478"
- Description: The applicability of a quality by design framework for the development of a sensitive, simple and selective, stability-indicating reversed-phase high-performance liquid chromatography analytical method for the analysis of captopril was investigated. Design of experiments using a central composite design approach was used for method development. Twenty experimental runs were performed with acetonitrile content ranging between 28 and 36 % v/v, pH from 2.8 to 3.6 and temperature between 22° and 32°. The experimental data obtained was used to derive a quadratic model for the retention time of captopril. The optimized method produced sharp peaks with good resolution (>2) for captopril and the internal standard with retention times of 3.1 and 6.2 min, respectively. The experimental data revealed that acetonitrile content in the mobile phase and pH are significant factors that affect the retention time and resolution of captopril. Normal probability plots revealed that the residual and predicted data fall approximately on a straight line, indicating that the experimental error for these studies was evenly distributed suggesting that the model could be used to navigate the design space. This approach is useful to expedite method development and optimization activities in analytical laboratories.
- Full Text:
- Date Issued: 2019
Generic substitution: the use of medicinal products containing different salts and implications for safety and efficacy
- Verbeeck, R K, Kanfer, Isadore, Walker, Roderick B
- Authors: Verbeeck, R K , Kanfer, Isadore , Walker, Roderick B
- Date: 2006
- Language: English
- Type: text , Article
- Identifier: vital:6445 , http://hdl.handle.net/10962/d1006632
- Description: In their quest to gain early entry of new generic products into the market prior to patent expiration, one of the strategies pursued by generic drug product manufacturers is to incorporate different salts of an approved active pharmaceutical ingredient (API) in a brand company's marketed dosage form and subject such dosage forms to bioequivalence assessment. These initiatives present challenges to regulatory authorities where the decision to approve bioequivalent products containing such pharmaceutical alternatives must be considered in the light of safety and efficacy, and more particularly, with respect to their substitutability. This article describes the various issues and contentions associated with the concept of pharmaceutical alternatives, specifically with respect to the uses of different salts and the implications for safety, efficacy and generic substitution.
- Full Text:
- Date Issued: 2006
- Authors: Verbeeck, R K , Kanfer, Isadore , Walker, Roderick B
- Date: 2006
- Language: English
- Type: text , Article
- Identifier: vital:6445 , http://hdl.handle.net/10962/d1006632
- Description: In their quest to gain early entry of new generic products into the market prior to patent expiration, one of the strategies pursued by generic drug product manufacturers is to incorporate different salts of an approved active pharmaceutical ingredient (API) in a brand company's marketed dosage form and subject such dosage forms to bioequivalence assessment. These initiatives present challenges to regulatory authorities where the decision to approve bioequivalent products containing such pharmaceutical alternatives must be considered in the light of safety and efficacy, and more particularly, with respect to their substitutability. This article describes the various issues and contentions associated with the concept of pharmaceutical alternatives, specifically with respect to the uses of different salts and the implications for safety, efficacy and generic substitution.
- Full Text:
- Date Issued: 2006
Formulation development and in vitro evaluation of didanosine-loaded nanostructured lipid carriers for the potential treatment of AIDS dementia complex
- Wa Kasongo, Kasongo, Shegokar, Ranjita, Müller, Rainer H, Walker, Roderick B
- Authors: Wa Kasongo, Kasongo , Shegokar, Ranjita , Müller, Rainer H , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184210 , vital:44190 , xlink:href="https://doi.org/10.3109/03639045.2010.516264"
- Description: The purpose of this article was to investigate the feasibility of incorporating didanosine (DDI) into nanostructured lipid carriers (NLC) for potential treatment of AIDS dementia complex. Aqueous DDI-free and DDI-loaded NLC were manufactured using hot high-pressure homogenization. The lipid matrix contained a mixture of Precirol ® ATO 5 and Transcutol ® HP. Photon correlation spectroscopy revealed that the mean particle size for all formulations was below 250 nm with narrow polydispersity indices. In addition, the d99% values for all formulations determined using laser diffractometry were below 400 nm with the span values ranging from 0.84 to 1.0. The zeta potential values ranged from −18.4 to −11.4 mV and the encapsulation efficiency of NLC for DDI ranged from 33.02% to 78.34%. These parameters remained relatively constant for all formulations tested following storage for 2 months at 25°C indicating that all the formulations were relatively stable. Differential scanning calorimetry revealed a decrease in the degree of crystallinity of NLC in all formulations developed relative to the bulk lipid material. In addition, wide-angle X-ray scattering showed that NLC in all formulations tested existed in a single β-modification form and that DDI that had been incorporated into the NLC appeared to be molecularly dispersed in the lipid matrices. Images of the NLC formulations obtained using transmission electron microscopy revealed that all formulations contained a mixture of spherical and nonspherical particles irrespective of the amount of DDI that was added during the manufacture of the formulations.
- Full Text:
- Date Issued: 2011
- Authors: Wa Kasongo, Kasongo , Shegokar, Ranjita , Müller, Rainer H , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184210 , vital:44190 , xlink:href="https://doi.org/10.3109/03639045.2010.516264"
- Description: The purpose of this article was to investigate the feasibility of incorporating didanosine (DDI) into nanostructured lipid carriers (NLC) for potential treatment of AIDS dementia complex. Aqueous DDI-free and DDI-loaded NLC were manufactured using hot high-pressure homogenization. The lipid matrix contained a mixture of Precirol ® ATO 5 and Transcutol ® HP. Photon correlation spectroscopy revealed that the mean particle size for all formulations was below 250 nm with narrow polydispersity indices. In addition, the d99% values for all formulations determined using laser diffractometry were below 400 nm with the span values ranging from 0.84 to 1.0. The zeta potential values ranged from −18.4 to −11.4 mV and the encapsulation efficiency of NLC for DDI ranged from 33.02% to 78.34%. These parameters remained relatively constant for all formulations tested following storage for 2 months at 25°C indicating that all the formulations were relatively stable. Differential scanning calorimetry revealed a decrease in the degree of crystallinity of NLC in all formulations developed relative to the bulk lipid material. In addition, wide-angle X-ray scattering showed that NLC in all formulations tested existed in a single β-modification form and that DDI that had been incorporated into the NLC appeared to be molecularly dispersed in the lipid matrices. Images of the NLC formulations obtained using transmission electron microscopy revealed that all formulations contained a mixture of spherical and nonspherical particles irrespective of the amount of DDI that was added during the manufacture of the formulations.
- Full Text:
- Date Issued: 2011
Sensitive high-performance liquid chromatographic determination of cyclizine and its demethylated metabolite, norcyclizine, in biological fluids using coulometric detection
- Walker, Roderick B, Kanfer, Isadore
- Authors: Walker, Roderick B , Kanfer, Isadore
- Date: 1995
- Language: English
- Type: text , Article
- Identifier: vital:6452 , http://hdl.handle.net/10962/d1006640 , http://dx.doi.org/10.1016/0378-4347(95)00202-T
- Description: An accurate, sensitive, selective and reproducible high-performance liquid chromatographic method with coulometric detection for the determination of cyclizine and its inactive demethylated metabolite, norcyclizine, in biological fluids has been developed. The drugs were separated using a custom packed reversed-phase C18 analytical column and phosphate buffer (0.05 M, pH 3)-acetonitrile (7:3) as mobile phase. The dual electrode coulometric detector was operated in the "oxidative-screen" mode with the upstream electrode (detector 1) set at 0.55 V and the downstream electrode (detector 2) set at 0.90 V. Serum and urine samples were prepared for analysis by solid-phase extraction, followed by a simple phase-separation step. The limit of quantitation was 1 ng/ml for both cyclizine and norcyclizine in serum and urine.
- Full Text:
- Date Issued: 1995
- Authors: Walker, Roderick B , Kanfer, Isadore
- Date: 1995
- Language: English
- Type: text , Article
- Identifier: vital:6452 , http://hdl.handle.net/10962/d1006640 , http://dx.doi.org/10.1016/0378-4347(95)00202-T
- Description: An accurate, sensitive, selective and reproducible high-performance liquid chromatographic method with coulometric detection for the determination of cyclizine and its inactive demethylated metabolite, norcyclizine, in biological fluids has been developed. The drugs were separated using a custom packed reversed-phase C18 analytical column and phosphate buffer (0.05 M, pH 3)-acetonitrile (7:3) as mobile phase. The dual electrode coulometric detector was operated in the "oxidative-screen" mode with the upstream electrode (detector 1) set at 0.55 V and the downstream electrode (detector 2) set at 0.90 V. Serum and urine samples were prepared for analysis by solid-phase extraction, followed by a simple phase-separation step. The limit of quantitation was 1 ng/ml for both cyclizine and norcyclizine in serum and urine.
- Full Text:
- Date Issued: 1995
Bioequivalence assessment of generic products an innovative South African approach
- Walker, Roderick B, Kanfer, Isadore, Skinner, Michael F
- Authors: Walker, Roderick B , Kanfer, Isadore , Skinner, Michael F
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184256 , vital:44194 , xlink:href="https://doi.org/10.1080/10601330500534014"
- Description: Concurrent with the implementation of new legislation mandating Generic Substitution in South Africa, a new set of guidelines for bioavailability and bioequivalence have been published. Since one of the main objectives of the new legislation in South Africa relating to Generic Substitution is to ensure that medicines of high quality, safety, and efficacy are made more accessible and more affordable to the wider public, the need to speed up approval of such multi-source products has become a regulatory priority. In order to facilitate this process, various bioequivalence issues have been addressed including important issues such as the acceptance criteria and associated bioequivalence intervals, use of a foreign reference product and the issue of assessing highly variable drugs (HVDs). In addition, dispensations have been made with respect to food effect assessment and variability relating to genetic polymorphism in drug metabolism (genotyping/phenotyping). Furthermore, the use of “old” biostudies submitted in support of an application is subject to expiry date. Acceptance of appropriate data requires that specific criteria such as Cmax and AUC, in addition to the usual considerations, also meet the limits specified by the particular registration authority of the country where such products are intended to be marketed. Generally, these limits require that the 90% confidence interval (CI) for AUC and Cmax test/reference ratios lies within the acceptance interval of 0.80–1.25 calculated using log-transformed data. While such acceptance criteria are, in general, ubiquitous, some differences in acceptance criteria do exist between various countries. The new guidelines for bioavailability/bioequivalence studies developed by the South African regulatory authority, the Medicines Control Council (MCC), makes provision for highly variable drugs and the use of a non-South African reference product. The MCC requires that the acceptance criterion for Cmax ratios be set at 0.75–1.33 while maintaining AUC ratios at 0.80–1.25 using a 90% CI. Furthermore, provision is made to apply scaling based on average bioequivalence assessment and, as an interim measure, consideration has also been given to the use of a foreign reference product provided that equivalence between that product and the innovator product currently available on the South African market can be shown using in vitro testing.
- Full Text:
- Date Issued: 2006
- Authors: Walker, Roderick B , Kanfer, Isadore , Skinner, Michael F
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184256 , vital:44194 , xlink:href="https://doi.org/10.1080/10601330500534014"
- Description: Concurrent with the implementation of new legislation mandating Generic Substitution in South Africa, a new set of guidelines for bioavailability and bioequivalence have been published. Since one of the main objectives of the new legislation in South Africa relating to Generic Substitution is to ensure that medicines of high quality, safety, and efficacy are made more accessible and more affordable to the wider public, the need to speed up approval of such multi-source products has become a regulatory priority. In order to facilitate this process, various bioequivalence issues have been addressed including important issues such as the acceptance criteria and associated bioequivalence intervals, use of a foreign reference product and the issue of assessing highly variable drugs (HVDs). In addition, dispensations have been made with respect to food effect assessment and variability relating to genetic polymorphism in drug metabolism (genotyping/phenotyping). Furthermore, the use of “old” biostudies submitted in support of an application is subject to expiry date. Acceptance of appropriate data requires that specific criteria such as Cmax and AUC, in addition to the usual considerations, also meet the limits specified by the particular registration authority of the country where such products are intended to be marketed. Generally, these limits require that the 90% confidence interval (CI) for AUC and Cmax test/reference ratios lies within the acceptance interval of 0.80–1.25 calculated using log-transformed data. While such acceptance criteria are, in general, ubiquitous, some differences in acceptance criteria do exist between various countries. The new guidelines for bioavailability/bioequivalence studies developed by the South African regulatory authority, the Medicines Control Council (MCC), makes provision for highly variable drugs and the use of a non-South African reference product. The MCC requires that the acceptance criterion for Cmax ratios be set at 0.75–1.33 while maintaining AUC ratios at 0.80–1.25 using a 90% CI. Furthermore, provision is made to apply scaling based on average bioequivalence assessment and, as an interim measure, consideration has also been given to the use of a foreign reference product provided that equivalence between that product and the innovator product currently available on the South African market can be shown using in vitro testing.
- Full Text:
- Date Issued: 2006