The evaluation of indomethacin and theophylline oral controlled/modified-release dosage forms in vitro-in vivo correlations
- Tandt, Ludo Alfons Germaan Luc
- Authors: Tandt, Ludo Alfons Germaan Luc
- Date: 1992
- Subjects: Theophylline , Indomethacin , Drugs -- Controlled release , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3794 , http://hdl.handle.net/10962/d1003272 , Theophylline , Indomethacin , Drugs -- Controlled release , Drugs -- Dosage forms
- Description: Over the past few decades many researchers have investigated the utility of in vitro - in vivo correlations for the assessment of dosage forms. These investigations are, however, dependent on reproducible dissolution data and well conducted biostudies in order to establish meaningful and robust correlations. Despite the fact that the establishment of such correlations is perhaps idealistic, considerable interest has still been shown in this area of research. Various Controlled/Modified Release Dosage Forms (CMRD's) of theophylline, a weakly basic drug, and indomethacin, a weakly acidic drug, were assessed in order to establish in vitro - in vivo correlations. Dissolution rate studies were carried out using either the USP basket or paddle apparatus. The dissolution rate studies were conducted in a range of dissolution media of varying pH. Bioavailability studies were conducted on the dosage forms used by the Biopharmaceutics Research Institute at Rhodes University. The results of these biostudies were kindly made available for use in this research project. Type A correlations were established using a mathematical simulation process whereby expected in vivo responses are simulated and compared to actual profiles obtained for the dosage forms. In order to perform the simulations the dissolution rate profiles were stripped and using linear regression and the methods of residuals the dissolution rate order and the relevant dissolution rates were obtained. The results of the s imulations indicated that the in vivo serum concentration-time curves could be accurately predicted for the theophylline dosage forms but to a lesser extent, for the indomethacin formulations. The dissolution rate studies indicated that the paddle method is a suitable method for dissolution rate studies of theophylline CMRD's, although it appeared that the optimum pH of the dissolution medium was formulation dependent. Dissolution rate studies conducted on indomethacin formulations indicated that the USP specified basket method for extended-release indomethacin formulations was not able to distinguish between two formulations which exhibited different in vivo profiles. The conversion to the paddle method was, however, able to highlight the differences between these formulations. The use of three dimensional topographs to depict dissolution rate profiles was demonstrated for formulations of both theophylline and indomethacin. The topographs enabled the successful differentiation between bioinequivalent formulations. The dissolution rate profiles were also fitted to the Wei bull equation and the parameters obtained from this were compared to the Weibull parameters obtained from the in vivo absorption plots obtained using the Wagner-Nelson method. The results indicated that the Weibull function was suitable to describe both the in vivo and in vitro data. The following recommendations for the preformulation dissolution studies of weakly acidic and weakly basic drugs are proposed. The dissolution rate studies of weakly acid drugs, such as indomethacin, should be carried out over a range of pH utilising the paddle apparatus. Three dimensional topographs based on the dissolution data should be constructed and used as a comparative tool for different formulations. Based on these comparisons the appropriate formulation can then be selected for a pilot scale in vivo bioavailability study. The dissolution rate studies of weakly basic drugs, such as theophylline, should be carried out over a range of pH utilising the paddle apparatus. The dissolution data should then be used to simulate the expected in vivo profile and on this basis the appropriate formulation selected for a pilot scale bioavailability study. The above approach to the preformulation studies of new CMRO's would allow for the more careful selection of new dosage forms and could thus eliminate costly and unnecessary bioavailability studies performed on inferior formulations.
- Full Text:
- Date Issued: 1992
- Authors: Tandt, Ludo Alfons Germaan Luc
- Date: 1992
- Subjects: Theophylline , Indomethacin , Drugs -- Controlled release , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3794 , http://hdl.handle.net/10962/d1003272 , Theophylline , Indomethacin , Drugs -- Controlled release , Drugs -- Dosage forms
- Description: Over the past few decades many researchers have investigated the utility of in vitro - in vivo correlations for the assessment of dosage forms. These investigations are, however, dependent on reproducible dissolution data and well conducted biostudies in order to establish meaningful and robust correlations. Despite the fact that the establishment of such correlations is perhaps idealistic, considerable interest has still been shown in this area of research. Various Controlled/Modified Release Dosage Forms (CMRD's) of theophylline, a weakly basic drug, and indomethacin, a weakly acidic drug, were assessed in order to establish in vitro - in vivo correlations. Dissolution rate studies were carried out using either the USP basket or paddle apparatus. The dissolution rate studies were conducted in a range of dissolution media of varying pH. Bioavailability studies were conducted on the dosage forms used by the Biopharmaceutics Research Institute at Rhodes University. The results of these biostudies were kindly made available for use in this research project. Type A correlations were established using a mathematical simulation process whereby expected in vivo responses are simulated and compared to actual profiles obtained for the dosage forms. In order to perform the simulations the dissolution rate profiles were stripped and using linear regression and the methods of residuals the dissolution rate order and the relevant dissolution rates were obtained. The results of the s imulations indicated that the in vivo serum concentration-time curves could be accurately predicted for the theophylline dosage forms but to a lesser extent, for the indomethacin formulations. The dissolution rate studies indicated that the paddle method is a suitable method for dissolution rate studies of theophylline CMRD's, although it appeared that the optimum pH of the dissolution medium was formulation dependent. Dissolution rate studies conducted on indomethacin formulations indicated that the USP specified basket method for extended-release indomethacin formulations was not able to distinguish between two formulations which exhibited different in vivo profiles. The conversion to the paddle method was, however, able to highlight the differences between these formulations. The use of three dimensional topographs to depict dissolution rate profiles was demonstrated for formulations of both theophylline and indomethacin. The topographs enabled the successful differentiation between bioinequivalent formulations. The dissolution rate profiles were also fitted to the Wei bull equation and the parameters obtained from this were compared to the Weibull parameters obtained from the in vivo absorption plots obtained using the Wagner-Nelson method. The results indicated that the Weibull function was suitable to describe both the in vivo and in vitro data. The following recommendations for the preformulation dissolution studies of weakly acidic and weakly basic drugs are proposed. The dissolution rate studies of weakly acid drugs, such as indomethacin, should be carried out over a range of pH utilising the paddle apparatus. Three dimensional topographs based on the dissolution data should be constructed and used as a comparative tool for different formulations. Based on these comparisons the appropriate formulation can then be selected for a pilot scale in vivo bioavailability study. The dissolution rate studies of weakly basic drugs, such as theophylline, should be carried out over a range of pH utilising the paddle apparatus. The dissolution data should then be used to simulate the expected in vivo profile and on this basis the appropriate formulation selected for a pilot scale bioavailability study. The above approach to the preformulation studies of new CMRO's would allow for the more careful selection of new dosage forms and could thus eliminate costly and unnecessary bioavailability studies performed on inferior formulations.
- Full Text:
- Date Issued: 1992
The comparative bioavailability and in vitro assessment of solid oral dosage forms of paracetamol
- Authors: Braae, Karen
- Date: 1981 , 2013-04-02
- Subjects: Acetaminophen , Bioavailability , Drugs -- Bioavailability , Drugs -- Dosage forms , Analysis of variance
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3827 , http://hdl.handle.net/10962/d1006288 , Acetaminophen , Bioavailability , Drugs -- Bioavailability , Drugs -- Dosage forms , Analysis of variance
- Description: The dissolution profiles of eight lots of paracetamol tablets representing seven different tablet brands are determined in a USP rotating basket assembly and a stationary basket-rotating paddle apparatus. The in vitro data are expressed in terms of dissolution parameters and inter-tablet differences are assessed statistically using analysis of variance (ANOVA) and the Scheffe test. Highly significant differences are observed between a number of the tablets at the 95% confidence level. Representative tablets from the dissolution rate study and a control dose of paracetamol dissolved in water are subsequently investigated in a 4 x 4 latin square design bioavailability trial. Serum and urine samples are collected and assayed for paracetamol alone (serum) and together with its metabolites (urine) by means of high pressure liquid chromatography. The in vivo data are expressed in terms of bioavailability parameters and differences between the test doses are assessed by means of ANOVA. No significant differences are observed between the dosage forms at the 95% confidence level.
- Full Text:
- Date Issued: 1981
- Authors: Braae, Karen
- Date: 1981 , 2013-04-02
- Subjects: Acetaminophen , Bioavailability , Drugs -- Bioavailability , Drugs -- Dosage forms , Analysis of variance
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3827 , http://hdl.handle.net/10962/d1006288 , Acetaminophen , Bioavailability , Drugs -- Bioavailability , Drugs -- Dosage forms , Analysis of variance
- Description: The dissolution profiles of eight lots of paracetamol tablets representing seven different tablet brands are determined in a USP rotating basket assembly and a stationary basket-rotating paddle apparatus. The in vitro data are expressed in terms of dissolution parameters and inter-tablet differences are assessed statistically using analysis of variance (ANOVA) and the Scheffe test. Highly significant differences are observed between a number of the tablets at the 95% confidence level. Representative tablets from the dissolution rate study and a control dose of paracetamol dissolved in water are subsequently investigated in a 4 x 4 latin square design bioavailability trial. Serum and urine samples are collected and assayed for paracetamol alone (serum) and together with its metabolites (urine) by means of high pressure liquid chromatography. The in vivo data are expressed in terms of bioavailability parameters and differences between the test doses are assessed by means of ANOVA. No significant differences are observed between the dosage forms at the 95% confidence level.
- Full Text:
- Date Issued: 1981
Phenylpropanolamine : analytical and pharmacokinetic studies using high-performance liquid chromatography
- Authors: Scherzinger, Sabine Hilda
- Date: 1988
- Subjects: Phenylpropanolamine , Pharmacokinetics , High performance liquid chromatography
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: vital:3811 , http://hdl.handle.net/10962/d1004528
- Description: Phenylpropanolamine (PPA), a synthetic sympathomimetic amine structurally related to ephedrine has been widely used over t he past 40 years as a nasal decongestant and appetite suppressant. It has been the focus of much controversy concerning the efficacy of the drug in its use as an anorectic agent, and due to the side effects caused by the higher doses of PPA required for appetite suppression. Although extensively used, there is little information concerning the determination of PPA in biological fluids and on the pharmacokinetics of this drug. An adaptation of a published high-performance liquid chromatographic (HPLC) assay for PPA in serum and urine using U.V. detection at 210 nm is presented. PPA was separated in the reversed phase mode. The method has a limit of sensitivity of 5.0 ng/mL and 10.0 ng/mL in serum and urine respectively. Serum concentration data following a single 25 mg dose of phenylpropanolamine in human volunteers demonstrate the application of the analytical method for bioavailability and pharmacokinetic studies. After the administration of 25 mg, 50 mg or 100 mg PPA.HCl solutions to 5 human volunteers, a dose proportionality study demonstrated that PPA appears to exhibit linear kinetics. Linear one body compartment kinetics were assumed and the wagner-Nelson method used to transform in vivo serum data to absorption plots. The serum data were fitted to a model using nonlinear regression techniques to characterize the pharmacokinetic processes of PPA. The absorption of phenylpropanolamine appears to be discontinuous and the drug seems to favour a two body compartment model. The pharmacokinetic parameters obtained from a steady state study using multiple dosing of PPA.HCl solutions compared with those found from previous studies after the administration of sustained-release formulations. A plasma protein binding study using equilibrium dialysis demonstrated that PPA is not highly protein bound in the blood.
- Full Text:
- Date Issued: 1988
- Authors: Scherzinger, Sabine Hilda
- Date: 1988
- Subjects: Phenylpropanolamine , Pharmacokinetics , High performance liquid chromatography
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: vital:3811 , http://hdl.handle.net/10962/d1004528
- Description: Phenylpropanolamine (PPA), a synthetic sympathomimetic amine structurally related to ephedrine has been widely used over t he past 40 years as a nasal decongestant and appetite suppressant. It has been the focus of much controversy concerning the efficacy of the drug in its use as an anorectic agent, and due to the side effects caused by the higher doses of PPA required for appetite suppression. Although extensively used, there is little information concerning the determination of PPA in biological fluids and on the pharmacokinetics of this drug. An adaptation of a published high-performance liquid chromatographic (HPLC) assay for PPA in serum and urine using U.V. detection at 210 nm is presented. PPA was separated in the reversed phase mode. The method has a limit of sensitivity of 5.0 ng/mL and 10.0 ng/mL in serum and urine respectively. Serum concentration data following a single 25 mg dose of phenylpropanolamine in human volunteers demonstrate the application of the analytical method for bioavailability and pharmacokinetic studies. After the administration of 25 mg, 50 mg or 100 mg PPA.HCl solutions to 5 human volunteers, a dose proportionality study demonstrated that PPA appears to exhibit linear kinetics. Linear one body compartment kinetics were assumed and the wagner-Nelson method used to transform in vivo serum data to absorption plots. The serum data were fitted to a model using nonlinear regression techniques to characterize the pharmacokinetic processes of PPA. The absorption of phenylpropanolamine appears to be discontinuous and the drug seems to favour a two body compartment model. The pharmacokinetic parameters obtained from a steady state study using multiple dosing of PPA.HCl solutions compared with those found from previous studies after the administration of sustained-release formulations. A plasma protein binding study using equilibrium dialysis demonstrated that PPA is not highly protein bound in the blood.
- Full Text:
- Date Issued: 1988
Pharmacodynamics of phenylpropanolamine: aspects of safety and efficacy in humans
- Authors: Petrie, Lauri René
- Date: 1993
- Subjects: Phenylpropanolamine
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3785 , http://hdl.handle.net/10962/d1003263 , Phenylpropanolamine
- Description: Phenylpropanolamine (PPA), a synthetic sympathomimetic amine, is widely used as a nasal decongestant and as an appetite suppressant. Much controversy exists regarding the efficacy of the drug as an anorectic agent, the related adverse reactions caused by the relatively high doses required for appetite suppression and the potential of this drug for abuse. Whilst numerous studies have been carried out to assess the central and cardiovascular safety of PPA and many investigations have been performed to evaluate efficacy in terms of weight loss in humans, there is a relative paucity of information regarding the effects of PPA on appetite and food intake. A pilot trial was conducted to determine the feasiblility of a multidimensional approach to evaluate the safety and efficacy of PPA as ananorectic agent in humans. Eight normotensive caucasian women who were overweight participated in a randomised double-blind cross-over comparison of PPA (75 mg) and placebo and were dosed to steady-state on a 12-hour fixed-dose schedule for a period of eleven weeks. Aspects of efficacy evaluated included the effects of PPA on hunger, appetite and satiety,salivation, macro-nutrient food intake and body weight. Standardised scales were used to quantitatively assess the possible subjective mood and behavioural reinforcing effects of PPA. Supine systolic and diastolic blood pressures were monitored continually throughout the trial. In addition, peak and trough blood samp1es were taken to monitor serum concentrations of PPA reached at steady-state and patient compliance with the dosing schedule. An adaptation of a published reverse-phase high performance liquid chromatographic (HPLC) assay for PPA in serum using U.V. detection at 210 nm is presented. A significant decrease in body weight, salivation, total food intake and carbohydrate consumption was demonstrated following PPA administration. Phenylpropanolamine produced significant decrements in subjective reports of hunger and appetite, whilst apparently having little effect on satiety. No significant changes were observed for blood pressures and PPA did not produce significant mood alterations or behavioural reinforcing effects. The study demonstrates the feasibility of using this muti-faceted approach, with certain design modifications, to evaluate the overall safety and efficacy of PPA as an appetite suppressant.
- Full Text:
- Date Issued: 1993
- Authors: Petrie, Lauri René
- Date: 1993
- Subjects: Phenylpropanolamine
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3785 , http://hdl.handle.net/10962/d1003263 , Phenylpropanolamine
- Description: Phenylpropanolamine (PPA), a synthetic sympathomimetic amine, is widely used as a nasal decongestant and as an appetite suppressant. Much controversy exists regarding the efficacy of the drug as an anorectic agent, the related adverse reactions caused by the relatively high doses required for appetite suppression and the potential of this drug for abuse. Whilst numerous studies have been carried out to assess the central and cardiovascular safety of PPA and many investigations have been performed to evaluate efficacy in terms of weight loss in humans, there is a relative paucity of information regarding the effects of PPA on appetite and food intake. A pilot trial was conducted to determine the feasiblility of a multidimensional approach to evaluate the safety and efficacy of PPA as ananorectic agent in humans. Eight normotensive caucasian women who were overweight participated in a randomised double-blind cross-over comparison of PPA (75 mg) and placebo and were dosed to steady-state on a 12-hour fixed-dose schedule for a period of eleven weeks. Aspects of efficacy evaluated included the effects of PPA on hunger, appetite and satiety,salivation, macro-nutrient food intake and body weight. Standardised scales were used to quantitatively assess the possible subjective mood and behavioural reinforcing effects of PPA. Supine systolic and diastolic blood pressures were monitored continually throughout the trial. In addition, peak and trough blood samp1es were taken to monitor serum concentrations of PPA reached at steady-state and patient compliance with the dosing schedule. An adaptation of a published reverse-phase high performance liquid chromatographic (HPLC) assay for PPA in serum using U.V. detection at 210 nm is presented. A significant decrease in body weight, salivation, total food intake and carbohydrate consumption was demonstrated following PPA administration. Phenylpropanolamine produced significant decrements in subjective reports of hunger and appetite, whilst apparently having little effect on satiety. No significant changes were observed for blood pressures and PPA did not produce significant mood alterations or behavioural reinforcing effects. The study demonstrates the feasibility of using this muti-faceted approach, with certain design modifications, to evaluate the overall safety and efficacy of PPA as an appetite suppressant.
- Full Text:
- Date Issued: 1993
Pharmaceutical analysis and quality of complementary medicines : sceletium and associated products
- Patnala, Satya Siva Rama Ranganath Srinivas
- Authors: Patnala, Satya Siva Rama Ranganath Srinivas
- Date: 2007
- Subjects: Alternative medicine , Herbs -- Therapeutic use
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3872 , http://hdl.handle.net/10962/d1018263
- Description: There has been an upsurge in the use of Complementary and Alternate Medicines (CAMs) in both developed and developing countries. Although herbal medicines have been in use for many centuries, their quality, safety and efficacy are still of major concern. Many countries are in the process of integrating CAMs into conventional health care systems based on the knowledge and use of traditional medicines. The quality control (QC) of herbal products usually presents a formidable analytical challenge in view of the complexity of the constituents in plant material and the commercial non-availability of appropriate qualified reference standards. Sceletium, a genus belonging to the family Aizoaceae, has been reported to contain psychoactive alkaloids, specifically mesembrine, mesembrenone, mesembrenol and some other related alkaloids. Sceletium is marketed as dried plant powder and as phyto-pharmaceutical dosage forms. Sceletium products and plant material marketed through health shops and on the internet are associated with unjustified claims of specific therapeutic efficacy and may be of dubious quality. Validated analytical methods to estimate Sceletium alkaloids have not previously been reported in the scientific literature and the available methods have focused only on qualitative estimation. Furthermore, since appropriate markers were not commercially available for use as reference standards, a primary objective of this study was to isolate relevant compounds, qualify them as reference standards which could be applied to develop appropriate validated qualitative and quantitative analytical methods for fingerprinting and assay of Sceletium plant material and dosage forms. The alkaloidal markers mesembrine, mesembrenone and ∆⁷ mesembrenone were isolated by solvent extraction and chromatography from dried plant material. Mesembranol and epimesembranol were synthesised by hydrogenation of the isolated mesembrine using the catalyst platinum (IV) oxide and then further purified by semi-preparative column chromatography. All compounds were subjected to analysis by ¹H, ¹³C, 2-D nuclear magnetic resonance and liquid chromatography-tandem mass spectroscopy. Mesembrine was converted to hydrochloride crystals and mesembranol was isolated as crystals from the hydrogenation reaction mass. These compounds were analysed and characterised by X-ray crystallography. A relatively simple HPLC method for the separation and quantitative analysis of five relevant alkaloidal components in Sceletium was developed and validated. The method was applied to determine the alkaloids in plant material and dosage forms containing Sceletium. An LCMS method developed during the study provided accurate identification of the five relevant Sceletium alkaloids. The method was applied for the quantitative analysis and QC of Sceletium plant material and its dosage forms. This LCMS method was found to efficiently ionize the relevant alkaloidal markers in order to facilitate their detection, identification and quantification in Sceletium plant material as well as for the assay and QC of dosage forms containing Sceletium. The chemotaxonomy of some Sceletium species and commercially available Sceletium dosage forms were successfully studied by the LCMS method. The HPLC and LCMS methods were also used to monitor the bio-conversion of some of the alkaloids while processing the plant material as per traditional method of fermentation. Additionally a high resolution CZE method was developed for the separation of several Sceletium alkaloids in relatively short analysis times. This analytical method was used successfully to fingerprint the alkaloids and quantify mesembrine in Sceletium and its products. Sceletium species grown under varying conditions at different locations, when analyzed, showed major differences in their composition of alkaloids and an enormous difference was found to exist between the various species with respect to the presence and content of alkaloids. Sceletium and its products marketed through health shops and the internet may thus have problems with respect to the quality and related therapeutic efficacy. The QC of Sceletium presents a formidable challenge as Sceletium plants and products contain a complex mixture of compounds. The work presented herein contributes to a growing body of scientific knowledge to improve the QC standards of herbal medicines and also to provide vital information regarding the selection of plant species and information on the specific alkaloidal constituents to the cultivators of Sceletium and the manufacturers of its products.
- Full Text:
- Date Issued: 2007
- Authors: Patnala, Satya Siva Rama Ranganath Srinivas
- Date: 2007
- Subjects: Alternative medicine , Herbs -- Therapeutic use
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3872 , http://hdl.handle.net/10962/d1018263
- Description: There has been an upsurge in the use of Complementary and Alternate Medicines (CAMs) in both developed and developing countries. Although herbal medicines have been in use for many centuries, their quality, safety and efficacy are still of major concern. Many countries are in the process of integrating CAMs into conventional health care systems based on the knowledge and use of traditional medicines. The quality control (QC) of herbal products usually presents a formidable analytical challenge in view of the complexity of the constituents in plant material and the commercial non-availability of appropriate qualified reference standards. Sceletium, a genus belonging to the family Aizoaceae, has been reported to contain psychoactive alkaloids, specifically mesembrine, mesembrenone, mesembrenol and some other related alkaloids. Sceletium is marketed as dried plant powder and as phyto-pharmaceutical dosage forms. Sceletium products and plant material marketed through health shops and on the internet are associated with unjustified claims of specific therapeutic efficacy and may be of dubious quality. Validated analytical methods to estimate Sceletium alkaloids have not previously been reported in the scientific literature and the available methods have focused only on qualitative estimation. Furthermore, since appropriate markers were not commercially available for use as reference standards, a primary objective of this study was to isolate relevant compounds, qualify them as reference standards which could be applied to develop appropriate validated qualitative and quantitative analytical methods for fingerprinting and assay of Sceletium plant material and dosage forms. The alkaloidal markers mesembrine, mesembrenone and ∆⁷ mesembrenone were isolated by solvent extraction and chromatography from dried plant material. Mesembranol and epimesembranol were synthesised by hydrogenation of the isolated mesembrine using the catalyst platinum (IV) oxide and then further purified by semi-preparative column chromatography. All compounds were subjected to analysis by ¹H, ¹³C, 2-D nuclear magnetic resonance and liquid chromatography-tandem mass spectroscopy. Mesembrine was converted to hydrochloride crystals and mesembranol was isolated as crystals from the hydrogenation reaction mass. These compounds were analysed and characterised by X-ray crystallography. A relatively simple HPLC method for the separation and quantitative analysis of five relevant alkaloidal components in Sceletium was developed and validated. The method was applied to determine the alkaloids in plant material and dosage forms containing Sceletium. An LCMS method developed during the study provided accurate identification of the five relevant Sceletium alkaloids. The method was applied for the quantitative analysis and QC of Sceletium plant material and its dosage forms. This LCMS method was found to efficiently ionize the relevant alkaloidal markers in order to facilitate their detection, identification and quantification in Sceletium plant material as well as for the assay and QC of dosage forms containing Sceletium. The chemotaxonomy of some Sceletium species and commercially available Sceletium dosage forms were successfully studied by the LCMS method. The HPLC and LCMS methods were also used to monitor the bio-conversion of some of the alkaloids while processing the plant material as per traditional method of fermentation. Additionally a high resolution CZE method was developed for the separation of several Sceletium alkaloids in relatively short analysis times. This analytical method was used successfully to fingerprint the alkaloids and quantify mesembrine in Sceletium and its products. Sceletium species grown under varying conditions at different locations, when analyzed, showed major differences in their composition of alkaloids and an enormous difference was found to exist between the various species with respect to the presence and content of alkaloids. Sceletium and its products marketed through health shops and the internet may thus have problems with respect to the quality and related therapeutic efficacy. The QC of Sceletium presents a formidable challenge as Sceletium plants and products contain a complex mixture of compounds. The work presented herein contributes to a growing body of scientific knowledge to improve the QC standards of herbal medicines and also to provide vital information regarding the selection of plant species and information on the specific alkaloidal constituents to the cultivators of Sceletium and the manufacturers of its products.
- Full Text:
- Date Issued: 2007
Pharmaceutical analysis and drug interaction studies : African potato (Hypoxis hemerocallidea)
- Purushothaman Nair, Vipin Devi Prasad
- Authors: Purushothaman Nair, Vipin Devi Prasad
- Date: 2006
- Subjects: Potatoes -- Africa , Potatoes -- Therapeutic use , AIDS (Disease) -- Treatment , HIV infections -- Drug therapy , Medicinal plants
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3865 , http://hdl.handle.net/10962/d1015802
- Description: In order for a medicinal product to produce a consistent and reliable therapeutic response, it is essential that the final composition of the product is invariable and that the active ingredient/s is/are present in appropriate, non-toxic amounts. However, due to the complexity involved in the standardization of natural products, quality control (QC) criteria and procedures for the registration and market approval of such products are conspicuously absent in most countries around the world. African Potato (AP) is of great medical interest and this particular plant has gained tremendous popularity following the endorsement by the South African Minister of Health as a remedy for HIV/ AIDS patients. Very little information has appeared in the literature to describe methods for the quantitative analysis of hypoxoside, an important component in AP. It has also been claimed that sterols and sterolins present in AP are responsible for its medicinal property but is yet to be proven scientifically. To-date, no QC methods have been reported for the simultaneous quantitative analysis of the combination, β- sitosterol (BSS)/ stigmasterol (STG)/ stigmastanol (STN), purported to be present in preparations containing AP. The effect of concomitant administration of AP and other herbal medicines on the safety and efficacy of conventional medicines has not yet been fully determined. Amongst the objectives of this study was to develop and validate quantitative analytical methods that are suitable for the assay and quality control of plant material, extracts and commercial formulations containing AP. Hypoxoside was isolated from AP and characterized for use as a reference standard for the quality control of AP products and a stability-indicating HPLC/ UV assay method for the quantitative determination of hypoxoside was developed. In addition, a quantitative capillary zone electrophoretic (CZE) method was developed to determine hypoxoside, specifically for its advantages over HPLC. A HPLC method was also developed and validated for the quantitative analysis of BSS, STG and STN in commercially available oral dosage forms containing AP material or extracts thereof. The antioxidant activity of an aqueous extract of lyophilized corms of AP along with hypoxoside and rooperol were investigated. In comparison with the AP extracts and also with hypoxoside, rooperol showed significant antioxidant activity. The capacity of AP, (extracts, formulations, hypoxoside and rooperol as well as sterols to inhibit in vitro metabolism of drug substrates by human cytochrome P450 (CYP) enzymes such as CYP 3A4, 3A5 and CYP19 were investigated. Samples were also assessed for their effect on drug transport proteins such as P-glycoprotein (P-gp). Various extracts of AP, AP formulations, stigmasterol and the norlignans, in particular the aglycone rooperol, exhibited inhibitory effects on CYP 3A4, 3A5 and CYP19 mediated metabolism.These results suggest that concurrent therapy with AP and other medicines, in particular antiretroviral drugs, can have important implications for safety and efficacy. Large discrepancies in marker content between AP products were found. Dissolution testing of AP products was investigated as a QC tool and the results also revealed inconsistencies between different AP products.
- Full Text:
- Date Issued: 2006
- Authors: Purushothaman Nair, Vipin Devi Prasad
- Date: 2006
- Subjects: Potatoes -- Africa , Potatoes -- Therapeutic use , AIDS (Disease) -- Treatment , HIV infections -- Drug therapy , Medicinal plants
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3865 , http://hdl.handle.net/10962/d1015802
- Description: In order for a medicinal product to produce a consistent and reliable therapeutic response, it is essential that the final composition of the product is invariable and that the active ingredient/s is/are present in appropriate, non-toxic amounts. However, due to the complexity involved in the standardization of natural products, quality control (QC) criteria and procedures for the registration and market approval of such products are conspicuously absent in most countries around the world. African Potato (AP) is of great medical interest and this particular plant has gained tremendous popularity following the endorsement by the South African Minister of Health as a remedy for HIV/ AIDS patients. Very little information has appeared in the literature to describe methods for the quantitative analysis of hypoxoside, an important component in AP. It has also been claimed that sterols and sterolins present in AP are responsible for its medicinal property but is yet to be proven scientifically. To-date, no QC methods have been reported for the simultaneous quantitative analysis of the combination, β- sitosterol (BSS)/ stigmasterol (STG)/ stigmastanol (STN), purported to be present in preparations containing AP. The effect of concomitant administration of AP and other herbal medicines on the safety and efficacy of conventional medicines has not yet been fully determined. Amongst the objectives of this study was to develop and validate quantitative analytical methods that are suitable for the assay and quality control of plant material, extracts and commercial formulations containing AP. Hypoxoside was isolated from AP and characterized for use as a reference standard for the quality control of AP products and a stability-indicating HPLC/ UV assay method for the quantitative determination of hypoxoside was developed. In addition, a quantitative capillary zone electrophoretic (CZE) method was developed to determine hypoxoside, specifically for its advantages over HPLC. A HPLC method was also developed and validated for the quantitative analysis of BSS, STG and STN in commercially available oral dosage forms containing AP material or extracts thereof. The antioxidant activity of an aqueous extract of lyophilized corms of AP along with hypoxoside and rooperol were investigated. In comparison with the AP extracts and also with hypoxoside, rooperol showed significant antioxidant activity. The capacity of AP, (extracts, formulations, hypoxoside and rooperol as well as sterols to inhibit in vitro metabolism of drug substrates by human cytochrome P450 (CYP) enzymes such as CYP 3A4, 3A5 and CYP19 were investigated. Samples were also assessed for their effect on drug transport proteins such as P-glycoprotein (P-gp). Various extracts of AP, AP formulations, stigmasterol and the norlignans, in particular the aglycone rooperol, exhibited inhibitory effects on CYP 3A4, 3A5 and CYP19 mediated metabolism.These results suggest that concurrent therapy with AP and other medicines, in particular antiretroviral drugs, can have important implications for safety and efficacy. Large discrepancies in marker content between AP products were found. Dissolution testing of AP products was investigated as a QC tool and the results also revealed inconsistencies between different AP products.
- Full Text:
- Date Issued: 2006
Pharmaceutical analysis and aspects of the quality control of St. John's Wort products
- Authors: Wild, Tracy Joy
- Date: 2003
- Subjects: Hypericum perforatum , Hypericum perforatum -- Analysis , Hypericum perforatum -- Therapeutic use , Hypericum perforatum -- Physiological effect , Flavonoids -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3804 , http://hdl.handle.net/10962/d1003282 , Hypericum perforatum , Hypericum perforatum -- Analysis , Hypericum perforatum -- Therapeutic use , Hypericum perforatum -- Physiological effect , Flavonoids -- Analysis
- Description: Most complementary medicines contain a multitude of chemical components, some of which are claimed to contribute to the biological activity of such products. Use of complementary medicines for preventative and therapeutic purposes is increasing rapidly worldwide. Unfortunately, although control of these products is essential to ensure quality, safety, and efficacy, the quality control of most herbal preparations is currently poor to non-existent, with little or no safety and efficacy data required to support the marketing and use of these products. The objective of this study was therefore to develop suitable analytical methods to qualitatively and quantitatively analyse the relevant components (rutin, isoquercitrin, hyperoside, quercitrin, quercetin, kaempferol, hypericin, pseudohypericin and hyperforin) in St John's Wort dosage forms for quality control purposes. A gradient HPLC method using a Luna 5·mC₁₈(2) 150 x 2.00mm internal diameter (i.d.) column and UV detection, was developed for the separation of six of the relevant flavonoid compounds in St John's Wort, namely rutin, isoquercitrin, hyperoside, quercitrin, quercetin and kaempferol. The development process involved a systematic investigation of gradient conditions, flow rate, and temperature. This method was subsequently applied to assay selected commercially available St John's Wort products. This system provided the necessary accuracy, precision and reproducibility and was associated with several advantages when compared to using standard bore (4.60 mm i.d.) HPLC columns. The method developed is currently the only known method that separates all six relevant flavonoids in a reasonable run time (less than 20 minutes). It is also one of the few methods that has sufficient separation between rutin, isoquercitrin and hyperoside. A qualitative method for the fingerprinting of flavonoid components was also developed, using capillary electrophoresis (CE). CE is a rapidly growing powerful analytical technique for the separation of charged compounds. Micellar electrokinetic chromatography (MEKC) is a very powerful electrophoretic technique that is capable of selectively resolving both neutral and ionic solutes in a single run. A MEKC method suitable for the separation and determination of various flavonoid constituents used as marker compounds in Hypericum perforatum was developed. Investigations into the effect of pH, ionic strength, applied voltage and capillary dimensions on separation were performed. The optimised method was then applied to qualitatively analyse various St John's Wort products on the market. This method was found to be advantageous in that it was simple, cost-effective, required minimal sample preparation and utilised very small quantities of sample. Due to the vast differences in chemical properties between the various marker and active components in St John's Wort, it was necessary to develop separate analytical methods for the flavonoids and for the other three relevant compounds (hypericin, pseudohypericin and hyperforin). An isocratic HPLC method using a Luna 5·mC₁₈(2) 150 x 2.00mm (i.d.) column and UV detection was developed for the separation of hypericin, pseudohypericin and hyperforin. The development process involved a systematic investigation of buffer molarity, mobile phase composition, pH, flow rate, and temperature. This method was subsequently applied to assay selected commercially available St John's Wort products on the South African market. This system also provided the necessary accuracy, precision and reproducibility, as well as the advantages associated with the use of a narrow bore column as opposed to the use of the more commonly used wider bore columns. This method was validated and used to quantitate these three compounds in various commercial St John's Wort products. By applying this method to liquid chromatography – tandem mass spectrometry (LC-MS-MS), qualitative analyses of the same products was performed to obtain confirmation of the quantitative HPLC results. Mass spectrometry is a powerful detection tool that is more selective and specific than many detection systems used with HPLC. Natural medicines usually constitute a multitude of constituents with much potential interference. In this regard LC-MS-MS is a powerful tool, with its ability to unequivocally identify target analytes regardless of the presence of interferences or complex matrices. ESI-MS-MS was used for the qualitative analysis of the content of the naphthodianthrones and hyperforin in the respective tablet products assayed with HPLC. LC-MS-MS analyses were performed in order to identify the constituents and to verify the specificity of the HPLC method. High inter-product and inter-batch variability was observed for all nine compounds assayed. These quantitative results were confirmed with the respective qualitative analyses. This study confirms the need for strict quality control of herbal medicinal products commercially available to consumers.
- Full Text:
- Date Issued: 2003
- Authors: Wild, Tracy Joy
- Date: 2003
- Subjects: Hypericum perforatum , Hypericum perforatum -- Analysis , Hypericum perforatum -- Therapeutic use , Hypericum perforatum -- Physiological effect , Flavonoids -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3804 , http://hdl.handle.net/10962/d1003282 , Hypericum perforatum , Hypericum perforatum -- Analysis , Hypericum perforatum -- Therapeutic use , Hypericum perforatum -- Physiological effect , Flavonoids -- Analysis
- Description: Most complementary medicines contain a multitude of chemical components, some of which are claimed to contribute to the biological activity of such products. Use of complementary medicines for preventative and therapeutic purposes is increasing rapidly worldwide. Unfortunately, although control of these products is essential to ensure quality, safety, and efficacy, the quality control of most herbal preparations is currently poor to non-existent, with little or no safety and efficacy data required to support the marketing and use of these products. The objective of this study was therefore to develop suitable analytical methods to qualitatively and quantitatively analyse the relevant components (rutin, isoquercitrin, hyperoside, quercitrin, quercetin, kaempferol, hypericin, pseudohypericin and hyperforin) in St John's Wort dosage forms for quality control purposes. A gradient HPLC method using a Luna 5·mC₁₈(2) 150 x 2.00mm internal diameter (i.d.) column and UV detection, was developed for the separation of six of the relevant flavonoid compounds in St John's Wort, namely rutin, isoquercitrin, hyperoside, quercitrin, quercetin and kaempferol. The development process involved a systematic investigation of gradient conditions, flow rate, and temperature. This method was subsequently applied to assay selected commercially available St John's Wort products. This system provided the necessary accuracy, precision and reproducibility and was associated with several advantages when compared to using standard bore (4.60 mm i.d.) HPLC columns. The method developed is currently the only known method that separates all six relevant flavonoids in a reasonable run time (less than 20 minutes). It is also one of the few methods that has sufficient separation between rutin, isoquercitrin and hyperoside. A qualitative method for the fingerprinting of flavonoid components was also developed, using capillary electrophoresis (CE). CE is a rapidly growing powerful analytical technique for the separation of charged compounds. Micellar electrokinetic chromatography (MEKC) is a very powerful electrophoretic technique that is capable of selectively resolving both neutral and ionic solutes in a single run. A MEKC method suitable for the separation and determination of various flavonoid constituents used as marker compounds in Hypericum perforatum was developed. Investigations into the effect of pH, ionic strength, applied voltage and capillary dimensions on separation were performed. The optimised method was then applied to qualitatively analyse various St John's Wort products on the market. This method was found to be advantageous in that it was simple, cost-effective, required minimal sample preparation and utilised very small quantities of sample. Due to the vast differences in chemical properties between the various marker and active components in St John's Wort, it was necessary to develop separate analytical methods for the flavonoids and for the other three relevant compounds (hypericin, pseudohypericin and hyperforin). An isocratic HPLC method using a Luna 5·mC₁₈(2) 150 x 2.00mm (i.d.) column and UV detection was developed for the separation of hypericin, pseudohypericin and hyperforin. The development process involved a systematic investigation of buffer molarity, mobile phase composition, pH, flow rate, and temperature. This method was subsequently applied to assay selected commercially available St John's Wort products on the South African market. This system also provided the necessary accuracy, precision and reproducibility, as well as the advantages associated with the use of a narrow bore column as opposed to the use of the more commonly used wider bore columns. This method was validated and used to quantitate these three compounds in various commercial St John's Wort products. By applying this method to liquid chromatography – tandem mass spectrometry (LC-MS-MS), qualitative analyses of the same products was performed to obtain confirmation of the quantitative HPLC results. Mass spectrometry is a powerful detection tool that is more selective and specific than many detection systems used with HPLC. Natural medicines usually constitute a multitude of constituents with much potential interference. In this regard LC-MS-MS is a powerful tool, with its ability to unequivocally identify target analytes regardless of the presence of interferences or complex matrices. ESI-MS-MS was used for the qualitative analysis of the content of the naphthodianthrones and hyperforin in the respective tablet products assayed with HPLC. LC-MS-MS analyses were performed in order to identify the constituents and to verify the specificity of the HPLC method. High inter-product and inter-batch variability was observed for all nine compounds assayed. These quantitative results were confirmed with the respective qualitative analyses. This study confirms the need for strict quality control of herbal medicinal products commercially available to consumers.
- Full Text:
- Date Issued: 2003
Investigations of the bioavailability/bioequivalence of topical corticosteroid formulations containing clobetasol propionate using the human skin blanching assay, tape stripping and microdialysis
- Authors: Au, Wai Ling
- Date: 2010
- Subjects: Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3743 , http://hdl.handle.net/10962/d1003221 , Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Description: Currently, clinical trials in patients are required by most regulatory authorities for the assessment of bioequivalence of topical products where the drug is not intended for systemic absorption. Hence there is a dire need for suitable methods for the assessment of bioavailability and bioequivalence of such products since clinical safety and efficacy studies are expensive, time-consuming and require very large numbers of patients. Except for topical corticosteroid products where the human skin blanching assay/vasoconstrictor assay has been approved by the US FDA for bioequivalence assessment of those products, no other method has been “officially” approved for use in those investigations. However, a few alternative methods such as tape stripping and microdialysis have been pursued and considered to have the potential for use in ioequivalence/bioavailability studies. The human skin blanching assay was used to assess the bioequivalence of commercially available topical products containing 0.05% clobetasol propionate. Both visual and chromameter data were obtained and a commercially available topical corticosteroid product, Dermovate® cream was used as both the “Test” and the “Reference” product. The results indicated that both visual and chromametric assessments were comparable to each other and that either could be used for the assessment of the bioequivalence of topical products containing clobetasol propionate. The screening procedure was optimized to identify potential “detectors” for inclusion in the bioequivalence studies. This resulted in fewer subjects being required in a bioequivalence pivotal study, still having the necessary power to confirm bioequivalence using the human skin blanching assay. Another objective of this research was to re-visit tape stripping and other possible alternative methods such as dermal microdialysis and to optimize these procedures for bioequivalence assessment of topical formulations where the drug is not intended for systemic absorption. In the past few decades, tape stripping has been used to investigate bioavailability/bioequivalence of various topical formulations. This technique involves the removal of the stratum corneum to assess drug penetration through the skin. A draft FDA guidance for tape stripping was initially published but was subsequently withdrawn due to high variability and poor reproducibility. This research project used an optimized tape stripping procedure to determine bioavailability and establish bioequivalence between three commercially available formulations containing 0.05 % m/m clobetasol propionate. Furthermore, tape stripping was validated by undertaking a study to assess the bioequivalence of a 0.05% topical cream formulation (Dermovate® cream) using the same cream as both the “Test” and “Reference” product, in which bioequivalence was confirmed. The findings highlight the potential of tape stripping as an alternative method for the assessment of bioequivalence of clobetasol propionate formulations and may possibly be extended for use in other topical products. Microdialysis is another useful technique that can assess the penetration of topically applied substances which diffuses through the stratum corneum and into the dermis. Microdialysis has previously been successfully used for in vivo bioavailability and bioequivalence assessments of topical formulations. However, the drugs which were under investigation were all hydrophilic in nature. A major problem with the use of microdialysis for the assessment of lipophilic substances is the binding/adherence of the substance to the membrane and other components of the microdialysis system. As a result, this necessitates the development of a microdialysis system which can be used to assess lipophilic drugs. Intralipid® 20% was investigated and successfully utilized as a perfusate to recover a lipophilic topical corticosteroid, clobetasol propionate, in microdialysis studies. Hence, the bioavailability of clobetasol propionate from an extemporaneous preparation was determined in healthy human volunteers using microdialysis. These findings indicate that in vivo microdialysis can be used to assess lipophilic drug penetration through the skin. A novel approach to investigate drug release from topical formulations containing 0.05% clobetasol propionate using in vitro microdialysis was also undertaken. The in vitro findings were found to be in agreement with the results obtained using tape stripping to assess bioequivalence of the same commercially available products, namely Dermovate® cream, Dovate® Cream and Dermovate® ointment. These results indicate the potential to correlate in vitro with in vivo data for bioequivalence assessment of such topical dosage forms.
- Full Text:
- Date Issued: 2010
- Authors: Au, Wai Ling
- Date: 2010
- Subjects: Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3743 , http://hdl.handle.net/10962/d1003221 , Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Description: Currently, clinical trials in patients are required by most regulatory authorities for the assessment of bioequivalence of topical products where the drug is not intended for systemic absorption. Hence there is a dire need for suitable methods for the assessment of bioavailability and bioequivalence of such products since clinical safety and efficacy studies are expensive, time-consuming and require very large numbers of patients. Except for topical corticosteroid products where the human skin blanching assay/vasoconstrictor assay has been approved by the US FDA for bioequivalence assessment of those products, no other method has been “officially” approved for use in those investigations. However, a few alternative methods such as tape stripping and microdialysis have been pursued and considered to have the potential for use in ioequivalence/bioavailability studies. The human skin blanching assay was used to assess the bioequivalence of commercially available topical products containing 0.05% clobetasol propionate. Both visual and chromameter data were obtained and a commercially available topical corticosteroid product, Dermovate® cream was used as both the “Test” and the “Reference” product. The results indicated that both visual and chromametric assessments were comparable to each other and that either could be used for the assessment of the bioequivalence of topical products containing clobetasol propionate. The screening procedure was optimized to identify potential “detectors” for inclusion in the bioequivalence studies. This resulted in fewer subjects being required in a bioequivalence pivotal study, still having the necessary power to confirm bioequivalence using the human skin blanching assay. Another objective of this research was to re-visit tape stripping and other possible alternative methods such as dermal microdialysis and to optimize these procedures for bioequivalence assessment of topical formulations where the drug is not intended for systemic absorption. In the past few decades, tape stripping has been used to investigate bioavailability/bioequivalence of various topical formulations. This technique involves the removal of the stratum corneum to assess drug penetration through the skin. A draft FDA guidance for tape stripping was initially published but was subsequently withdrawn due to high variability and poor reproducibility. This research project used an optimized tape stripping procedure to determine bioavailability and establish bioequivalence between three commercially available formulations containing 0.05 % m/m clobetasol propionate. Furthermore, tape stripping was validated by undertaking a study to assess the bioequivalence of a 0.05% topical cream formulation (Dermovate® cream) using the same cream as both the “Test” and “Reference” product, in which bioequivalence was confirmed. The findings highlight the potential of tape stripping as an alternative method for the assessment of bioequivalence of clobetasol propionate formulations and may possibly be extended for use in other topical products. Microdialysis is another useful technique that can assess the penetration of topically applied substances which diffuses through the stratum corneum and into the dermis. Microdialysis has previously been successfully used for in vivo bioavailability and bioequivalence assessments of topical formulations. However, the drugs which were under investigation were all hydrophilic in nature. A major problem with the use of microdialysis for the assessment of lipophilic substances is the binding/adherence of the substance to the membrane and other components of the microdialysis system. As a result, this necessitates the development of a microdialysis system which can be used to assess lipophilic drugs. Intralipid® 20% was investigated and successfully utilized as a perfusate to recover a lipophilic topical corticosteroid, clobetasol propionate, in microdialysis studies. Hence, the bioavailability of clobetasol propionate from an extemporaneous preparation was determined in healthy human volunteers using microdialysis. These findings indicate that in vivo microdialysis can be used to assess lipophilic drug penetration through the skin. A novel approach to investigate drug release from topical formulations containing 0.05% clobetasol propionate using in vitro microdialysis was also undertaken. The in vitro findings were found to be in agreement with the results obtained using tape stripping to assess bioequivalence of the same commercially available products, namely Dermovate® cream, Dovate® Cream and Dermovate® ointment. These results indicate the potential to correlate in vitro with in vivo data for bioequivalence assessment of such topical dosage forms.
- Full Text:
- Date Issued: 2010
Investigation of the potency of topical corticosteroids using the vasoconstrictor assay
- Authors: Zvidzayi, Kudzayi Michael
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65279 , vital:28717
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
- Authors: Zvidzayi, Kudzayi Michael
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65279 , vital:28717
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
HPLC analysis and pharmacokinetics of cyclizine
- Authors: Walker, Roderick Bryan
- Date: 1995
- Subjects: High performance liquid chromatography Piperazine Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3801 , http://hdl.handle.net/10962/d1003279
- Description: The investigations detailed in this dissertation have been conducted to address the paucity of pharmacokinetic information, in published literature, pertaining to cyclizine. The areas of investigation have included the selective quantitation of both cyclizine and its demethylated metabolite, norcyclizine in serum and urine, assessment of stability of both compounds in stored biological samples, dosage form analysis, dissolution rate testing of tablets, and bioavailability and pharmacokinetics following administration of an intravenous solution, and tablets to humans. High-performance liquid chromatography (HPLC) was used as the main analytical technique throughout these studies. An original HPLC method employing ultraviolet detection with a limit of quantitation of 5μg/ℓ was developed for the determination of cyclizine in serum and both cyclizine and norcyclizine in urine, Solid-phase extraction using extraction columns packed with reversed-phase C18 material, and followed by a simple phase-separation step proved successful for the accurate and precise isolation of the compounds. The validated method was applied to the analysis of serum and urine samples from a pilot study in which a single volunteer was administered 50mg of cyclizine hydrochloride. Several samples collected during the pilot study revealed the presence of both drug and metabolite in concentrations below the limit of detection. In order to improve the selectivity and sensitivity of the analytical method an HPLC method with electrochemical detection operating in the "oxidative-screen" mode was developed. The solid-phase extraction procedure was modified slightly and the method found to be precise, accurate, selective and highly sensitive with a limit of quantitation of Iμg/g/l for both cyclizine and norcyclizine in both serum and urine. This method was applied to the determination of both compounds after intravenous and oral administration of cyclizine to humans. HPLC with electrochemical detection was used for the analysis of samples collected during dissolution studies on the batch of tablets used for pharmacokinetic studies. In addition, this method was used to assess content uniformity of the tablets and of samples from the batch of intravenous ampoules of cyclizine lactate. Dissolution studies showed that all tablets tested passed the compendial specifications for cyclizine. Content uniformity assessment revealed that within-batch uniformity existed for both the tablets and ampoules and, therefore, variations in pharmacokinetic parameters for the drug would more than likely be as a result of inter- and intra-individual variability within the subject population. Pharmacokinetic information for cyclizine was obtained following administration of an intravenous bolus dose of cyclizine lactate as a solution, oral administration of cyclizine hydrochloride as a single dose of 50mg and as fixed multiple doses of 50mg every 8 hours for five days. Further information was acquired following administration of single doses of 100mg and 150mg cyclizine hydrochloride. Data collected from these studies were evaluated using both compartmental and non-compartmental techniques. Cyclizine was rapidly absorbed following oral administration with mean kₐ = 1.54 hr⁻¹ and was found to have an absolute bioavailability (F) of 0.47. The presence of norcyclizine in serum following oral and not intravenous dosing suggests cyclizine is susceptible to "first-pass" metabolism in either the gut wall or the I iver. Mean ClTOT determined following the intravenous dose was 0.865 ℓ/hr/kg. The mean ClTOT of 0.823 ℓ/hr/kg calculated following oral dosing, using a unique value of F for each subject compared favourahly with that obtained following intravenous dosing. Renal clearance of cyclizine is negligihle indicating that non-renal routes of elimination account for the majority of removal of cyclizine form the body. Cyclizine is extensively distributed and the mean Vz following an intravenous dose was 16.70 ℓ/kg. This value is lower than that calculated from all oral studies from which the mean Vz was determined to be 25.74 ℓ/kg. Cyclizine is eliminated slowly with a mean elimination t½ = 20.11 hours. Cyclizine dose not appear to follow dosedependent kinetics and therefore, inability to predict steady state levels are more than likely due to accumulation as a result of frequent dosing rather than saturation of elimination mechanisms. Modelling of intravenous data to one-compartment (lBCM), two-compartment (2BCM) and threecompartment models indicated that the pharmacokinetics of cyclizine can be adequately described by a 3BCM. The drug is rapidly distributed into a "shallow" peripheral compartment (α = 9.44 hr⁻¹ , and k₂₁ = 2.09 hr⁻¹ ), and slowly distributed to the "deep" peripheral compartment (β = 0.451 hr⁻¹ and k₃₁ = 0.120 hr⁻¹ ). Modelling of all oral data indicated that a 2BCM best described the pharmacokinetics of the drug, however, distribution to the peripheral compartment is not as rapid as to the "shallow" peripheral compartment following the intravenous dose. Mean distribution parameters were α = 0.64 hr⁻¹1 and, k₂₁ = 0.39 hr⁻¹. Mean CITOT following intravenous dosing of 0.70 ℓ/hr/kg was similar to the mean CIToT of 0.73 ℓ/hr/kg determined after oral dosing. The mean distribution volume at steady state determined following intravenous dosing (17.78 ℓ/kg) was lower than that obtained from the oral studies (25.52 ℓ/kg). The mean terminal elimination half-lives calculated for cyclizine following fitting of intravenous and oral data was 25.09 hours. In general, mean pharmacokinetic parameters calculated following titting of data to a 2BCM after oral administration correlate closely with those calculated using non-compartmental techniques. However, the pharmacokinetics following intravenous dosing are better described by a 3BCM and a close correlation between parameters estimated using noncompartmental techniques and compartmental techniques is evident when a 3BCM model is used.
- Full Text:
- Date Issued: 1995
- Authors: Walker, Roderick Bryan
- Date: 1995
- Subjects: High performance liquid chromatography Piperazine Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3801 , http://hdl.handle.net/10962/d1003279
- Description: The investigations detailed in this dissertation have been conducted to address the paucity of pharmacokinetic information, in published literature, pertaining to cyclizine. The areas of investigation have included the selective quantitation of both cyclizine and its demethylated metabolite, norcyclizine in serum and urine, assessment of stability of both compounds in stored biological samples, dosage form analysis, dissolution rate testing of tablets, and bioavailability and pharmacokinetics following administration of an intravenous solution, and tablets to humans. High-performance liquid chromatography (HPLC) was used as the main analytical technique throughout these studies. An original HPLC method employing ultraviolet detection with a limit of quantitation of 5μg/ℓ was developed for the determination of cyclizine in serum and both cyclizine and norcyclizine in urine, Solid-phase extraction using extraction columns packed with reversed-phase C18 material, and followed by a simple phase-separation step proved successful for the accurate and precise isolation of the compounds. The validated method was applied to the analysis of serum and urine samples from a pilot study in which a single volunteer was administered 50mg of cyclizine hydrochloride. Several samples collected during the pilot study revealed the presence of both drug and metabolite in concentrations below the limit of detection. In order to improve the selectivity and sensitivity of the analytical method an HPLC method with electrochemical detection operating in the "oxidative-screen" mode was developed. The solid-phase extraction procedure was modified slightly and the method found to be precise, accurate, selective and highly sensitive with a limit of quantitation of Iμg/g/l for both cyclizine and norcyclizine in both serum and urine. This method was applied to the determination of both compounds after intravenous and oral administration of cyclizine to humans. HPLC with electrochemical detection was used for the analysis of samples collected during dissolution studies on the batch of tablets used for pharmacokinetic studies. In addition, this method was used to assess content uniformity of the tablets and of samples from the batch of intravenous ampoules of cyclizine lactate. Dissolution studies showed that all tablets tested passed the compendial specifications for cyclizine. Content uniformity assessment revealed that within-batch uniformity existed for both the tablets and ampoules and, therefore, variations in pharmacokinetic parameters for the drug would more than likely be as a result of inter- and intra-individual variability within the subject population. Pharmacokinetic information for cyclizine was obtained following administration of an intravenous bolus dose of cyclizine lactate as a solution, oral administration of cyclizine hydrochloride as a single dose of 50mg and as fixed multiple doses of 50mg every 8 hours for five days. Further information was acquired following administration of single doses of 100mg and 150mg cyclizine hydrochloride. Data collected from these studies were evaluated using both compartmental and non-compartmental techniques. Cyclizine was rapidly absorbed following oral administration with mean kₐ = 1.54 hr⁻¹ and was found to have an absolute bioavailability (F) of 0.47. The presence of norcyclizine in serum following oral and not intravenous dosing suggests cyclizine is susceptible to "first-pass" metabolism in either the gut wall or the I iver. Mean ClTOT determined following the intravenous dose was 0.865 ℓ/hr/kg. The mean ClTOT of 0.823 ℓ/hr/kg calculated following oral dosing, using a unique value of F for each subject compared favourahly with that obtained following intravenous dosing. Renal clearance of cyclizine is negligihle indicating that non-renal routes of elimination account for the majority of removal of cyclizine form the body. Cyclizine is extensively distributed and the mean Vz following an intravenous dose was 16.70 ℓ/kg. This value is lower than that calculated from all oral studies from which the mean Vz was determined to be 25.74 ℓ/kg. Cyclizine is eliminated slowly with a mean elimination t½ = 20.11 hours. Cyclizine dose not appear to follow dosedependent kinetics and therefore, inability to predict steady state levels are more than likely due to accumulation as a result of frequent dosing rather than saturation of elimination mechanisms. Modelling of intravenous data to one-compartment (lBCM), two-compartment (2BCM) and threecompartment models indicated that the pharmacokinetics of cyclizine can be adequately described by a 3BCM. The drug is rapidly distributed into a "shallow" peripheral compartment (α = 9.44 hr⁻¹ , and k₂₁ = 2.09 hr⁻¹ ), and slowly distributed to the "deep" peripheral compartment (β = 0.451 hr⁻¹ and k₃₁ = 0.120 hr⁻¹ ). Modelling of all oral data indicated that a 2BCM best described the pharmacokinetics of the drug, however, distribution to the peripheral compartment is not as rapid as to the "shallow" peripheral compartment following the intravenous dose. Mean distribution parameters were α = 0.64 hr⁻¹1 and, k₂₁ = 0.39 hr⁻¹. Mean CITOT following intravenous dosing of 0.70 ℓ/hr/kg was similar to the mean CIToT of 0.73 ℓ/hr/kg determined after oral dosing. The mean distribution volume at steady state determined following intravenous dosing (17.78 ℓ/kg) was lower than that obtained from the oral studies (25.52 ℓ/kg). The mean terminal elimination half-lives calculated for cyclizine following fitting of intravenous and oral data was 25.09 hours. In general, mean pharmacokinetic parameters calculated following titting of data to a 2BCM after oral administration correlate closely with those calculated using non-compartmental techniques. However, the pharmacokinetics following intravenous dosing are better described by a 3BCM and a close correlation between parameters estimated using noncompartmental techniques and compartmental techniques is evident when a 3BCM model is used.
- Full Text:
- Date Issued: 1995
High-performance liquid chromatographic studies of the acid degradation, pharmacokinetics and comparative bioavailability of erythromycin
- Authors: Glew, Fiona
- Date: 1989
- Subjects: High performance liquid chromatography , Erythromycin -- Analysis , Erythromycin -- Pharmacokinetics , Erythromycin -- Bioavailability
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3737 , http://hdl.handle.net/10962/d1001529
- Description: Erythromycin is a macrolide antibiotic with a spectrum similar to penicillin and is used mainly in the treatment of infections caused by gram-positive organisms. Since its discovery in 1952, erythromycin has achieved wide-spread clinical use. Susceptibility of erythromycin base to inactivation by acid results in decreased availability following exposure to acidic gastric fluids. Formulation of acid resistant dosage forms and the preparation of acid stable chemical derivatives have been attempted to improve absorption and subsequent clinical efficacy . Two of the most commonly used erythromycin derivatives are the stearic acid salt (erythromycin stearate) and the lauryl sulphate salt of the propionyl ester (erythromycin estolate). Although it has been known for many years that erythromycin is susceptible to acid degradation, very few reports on the stability of erythromycin in aqueous solutions appear in the literature. In this study, a high-performance liquid chromatographic system using electrochemical detection was employed for a kinetic study of erythromycin degradation. The effect of varying acid pH on the degradation rate of both erythromycin base and erythromycin stearate, and the effect on the hydrolysis rate of erythromycin estolate is presented. In addition, the effect of temperature on erythromycin degradation was also investigated. Until recently, the majority of pharmacokinetic and bioavailability studies have utilized relatively non-specific microbiological assay procedures. However, in this study a solid phase extraction, followed by the use of a high-performance liquid chromatographic system using electrochemical coulometric detection was employed for the determination of erythromycin in biological fluids. Human volunteers each received enteric coated erythromycin base pellets in capsule dosage form and also film coated erythromycin stearate tablets on separate occasions. Results from the clinical trials revealed the enteric coated erythromycin base pellets had a greater bioavailability than the film coated erythromycin stearate tablets. Computer fitting of data revealed no intra-volunteer variability in elimination rate constants, suggesting differences in serum levels following administration of both dosage forms are due to variation in absorption. Results from the clinical trials were also compared with those obtained from a further trial, during which the same volunteers received erythromycin estolate
- Full Text:
- Date Issued: 1989
- Authors: Glew, Fiona
- Date: 1989
- Subjects: High performance liquid chromatography , Erythromycin -- Analysis , Erythromycin -- Pharmacokinetics , Erythromycin -- Bioavailability
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3737 , http://hdl.handle.net/10962/d1001529
- Description: Erythromycin is a macrolide antibiotic with a spectrum similar to penicillin and is used mainly in the treatment of infections caused by gram-positive organisms. Since its discovery in 1952, erythromycin has achieved wide-spread clinical use. Susceptibility of erythromycin base to inactivation by acid results in decreased availability following exposure to acidic gastric fluids. Formulation of acid resistant dosage forms and the preparation of acid stable chemical derivatives have been attempted to improve absorption and subsequent clinical efficacy . Two of the most commonly used erythromycin derivatives are the stearic acid salt (erythromycin stearate) and the lauryl sulphate salt of the propionyl ester (erythromycin estolate). Although it has been known for many years that erythromycin is susceptible to acid degradation, very few reports on the stability of erythromycin in aqueous solutions appear in the literature. In this study, a high-performance liquid chromatographic system using electrochemical detection was employed for a kinetic study of erythromycin degradation. The effect of varying acid pH on the degradation rate of both erythromycin base and erythromycin stearate, and the effect on the hydrolysis rate of erythromycin estolate is presented. In addition, the effect of temperature on erythromycin degradation was also investigated. Until recently, the majority of pharmacokinetic and bioavailability studies have utilized relatively non-specific microbiological assay procedures. However, in this study a solid phase extraction, followed by the use of a high-performance liquid chromatographic system using electrochemical coulometric detection was employed for the determination of erythromycin in biological fluids. Human volunteers each received enteric coated erythromycin base pellets in capsule dosage form and also film coated erythromycin stearate tablets on separate occasions. Results from the clinical trials revealed the enteric coated erythromycin base pellets had a greater bioavailability than the film coated erythromycin stearate tablets. Computer fitting of data revealed no intra-volunteer variability in elimination rate constants, suggesting differences in serum levels following administration of both dosage forms are due to variation in absorption. Results from the clinical trials were also compared with those obtained from a further trial, during which the same volunteers received erythromycin estolate
- Full Text:
- Date Issued: 1989
Formulation and evaluation of captopril loaded polymethacrylate and hydroxypropyl methycellulose microcapsules
- Khamanga, Sandile Maswazi Malungelo
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Date Issued: 2010
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Date Issued: 2010
Evaluation of the pharmaceutical availability of erythromycin from topical formulations
- Authors: Mandimika, Nyaradzo
- Date: 2008
- Subjects: Pharmacy -- Research Chromatographic analysis Gel permeation chromatography Gels (Pharmacy) Chemistry, analytic Acne -- Treatment Sebaceous glands -- Diseases -- Treatment Drugs -- Testing Erythromycin -- Bioavailability
- Language: English
- Type: Thesis , Masters , MPharm
- Identifier: vital:3771 , http://hdl.handle.net/10962/d1003249
- Description: Erythromycin (ERY) is a macrolide antibiotic which is used in the treatment of acne vulgaris.Acne is a common skin condition that occurs when the sebaceous glands and hair shafts become infected by the bacteria Propionibacterium acnes. Acne is a chronic condition that may last for years and the severity of the effects of the disease on patients is often undermined especially in third world countries where more emphasis is placed on other more life-threatening diseases. It may cause considerable physical and emotional distress to sufferers along with the possibility of permanent scarring. Although use of topical ERY formulations is not the first line of treatment it has proven to be effective in treating inflammation of skin and skin structures cause by the responsible bacteria. To-date there are a variety of vehicles which are used in preparing topical ERY formulations namely ointment and gel bases, alcoholic solutions and pledgets. All the gel formulations on the market contain hydroxypropyl cellulose, alcohol and water along with the active ingredient(s). However, some gel formulations contain propylene glycol in addition to these excipients an example being Emgel®. Propylene glycol has been shown to affect the penetration of topically applied drugs through the skin suggesting that it would be highly likely that those formulations which contain propylene glycol may release more ERY into the skin following application. With this in mind, two ERY gel formulations were produced which contained different percentages of propylene glycol. According to the FDA guidelines, pharmacokinetic measurements in blood, plasma and/or urine of topical dermatological drug products are not feasible to document bioequivalence since the active ingredient(s) in topical formulations is/are not intended to be absorbed into the systemic circulation and in addition, concentrations in extracutaneous biological tissues would generally not be measurable. This limits determination of bioavailability and assessment of bioequivalence of such products to pharmacodynamic measurements, clinical trials and dermatopharmacokinetic (DPK) measurements such as tape stripping (TS) and microdialysis (MD).TS is a sampling technique which involves sequential removal of layers of the stratum corneum using strips of adhesive tape. This technique has found increasing use in DPK studies for investigation of drug kinetics in the skin following the application of a topical formulation. The technique has also been used as a diagnostic tool in assessing the quality of the stratum corneum in diseased skin. In the current research study, the tape stripping technique was used to investigate the pharmaceutical/biological availability of topical gel formulations containing ERY. MD is another DPK sampling technique which has been used to determine the amount of a topically applied drug that penetrates through the stratum corneum to reach deeper tissues of the skin. The in vivo sampling technique involves the insertion of microdialysis probes beneath the skin surface in the dermal tissue and allows for real-time sampling of the analyte at its target site. Recently in vitro MD has also been successfully used to assess the pharmaceutical availability of a topical corticosteroid, mometesone furoate, from topical formulations. Based on this work, microdialysis was used to determine the pharmaceutical availability of ERY from gel formulations which were developed for use in this research. The results of the pharmaceutical availability of ERY from in vivo tape stripping studies and the in vitro microdialysis studies were compared to establish correlation between the data. Pharmaceutical equivalence and bioequivalence data obtained from the respective studies on the gel formulations were investigated by statistical analysis of the data generated from both the in vitro and in vivo experiments. In summary the objectives of this research were: 1. To develop and validate a high performance liquid chromatography method suitable to analyse ERY concentrations obtained from in vitro microdialysis studies and in vivo tape stripping studies. 2. To prepare two different ERY gel formulations with different percentage content of propylene glycol. 3. To determine the pharmaceutical availability of ERY from two different gel formulations using in vitro microdialysis. 4. To develop and validate a tape stripping technique which could be used to determine percutaneous penetration and bioequivalence of the gel formulations. 5. To compare in vitro microdialysis and in vivo tape stripping data and attempt to establish a correlation between the two different approaches.
- Full Text:
- Date Issued: 2008
- Authors: Mandimika, Nyaradzo
- Date: 2008
- Subjects: Pharmacy -- Research Chromatographic analysis Gel permeation chromatography Gels (Pharmacy) Chemistry, analytic Acne -- Treatment Sebaceous glands -- Diseases -- Treatment Drugs -- Testing Erythromycin -- Bioavailability
- Language: English
- Type: Thesis , Masters , MPharm
- Identifier: vital:3771 , http://hdl.handle.net/10962/d1003249
- Description: Erythromycin (ERY) is a macrolide antibiotic which is used in the treatment of acne vulgaris.Acne is a common skin condition that occurs when the sebaceous glands and hair shafts become infected by the bacteria Propionibacterium acnes. Acne is a chronic condition that may last for years and the severity of the effects of the disease on patients is often undermined especially in third world countries where more emphasis is placed on other more life-threatening diseases. It may cause considerable physical and emotional distress to sufferers along with the possibility of permanent scarring. Although use of topical ERY formulations is not the first line of treatment it has proven to be effective in treating inflammation of skin and skin structures cause by the responsible bacteria. To-date there are a variety of vehicles which are used in preparing topical ERY formulations namely ointment and gel bases, alcoholic solutions and pledgets. All the gel formulations on the market contain hydroxypropyl cellulose, alcohol and water along with the active ingredient(s). However, some gel formulations contain propylene glycol in addition to these excipients an example being Emgel®. Propylene glycol has been shown to affect the penetration of topically applied drugs through the skin suggesting that it would be highly likely that those formulations which contain propylene glycol may release more ERY into the skin following application. With this in mind, two ERY gel formulations were produced which contained different percentages of propylene glycol. According to the FDA guidelines, pharmacokinetic measurements in blood, plasma and/or urine of topical dermatological drug products are not feasible to document bioequivalence since the active ingredient(s) in topical formulations is/are not intended to be absorbed into the systemic circulation and in addition, concentrations in extracutaneous biological tissues would generally not be measurable. This limits determination of bioavailability and assessment of bioequivalence of such products to pharmacodynamic measurements, clinical trials and dermatopharmacokinetic (DPK) measurements such as tape stripping (TS) and microdialysis (MD).TS is a sampling technique which involves sequential removal of layers of the stratum corneum using strips of adhesive tape. This technique has found increasing use in DPK studies for investigation of drug kinetics in the skin following the application of a topical formulation. The technique has also been used as a diagnostic tool in assessing the quality of the stratum corneum in diseased skin. In the current research study, the tape stripping technique was used to investigate the pharmaceutical/biological availability of topical gel formulations containing ERY. MD is another DPK sampling technique which has been used to determine the amount of a topically applied drug that penetrates through the stratum corneum to reach deeper tissues of the skin. The in vivo sampling technique involves the insertion of microdialysis probes beneath the skin surface in the dermal tissue and allows for real-time sampling of the analyte at its target site. Recently in vitro MD has also been successfully used to assess the pharmaceutical availability of a topical corticosteroid, mometesone furoate, from topical formulations. Based on this work, microdialysis was used to determine the pharmaceutical availability of ERY from gel formulations which were developed for use in this research. The results of the pharmaceutical availability of ERY from in vivo tape stripping studies and the in vitro microdialysis studies were compared to establish correlation between the data. Pharmaceutical equivalence and bioequivalence data obtained from the respective studies on the gel formulations were investigated by statistical analysis of the data generated from both the in vitro and in vivo experiments. In summary the objectives of this research were: 1. To develop and validate a high performance liquid chromatography method suitable to analyse ERY concentrations obtained from in vitro microdialysis studies and in vivo tape stripping studies. 2. To prepare two different ERY gel formulations with different percentage content of propylene glycol. 3. To determine the pharmaceutical availability of ERY from two different gel formulations using in vitro microdialysis. 4. To develop and validate a tape stripping technique which could be used to determine percutaneous penetration and bioequivalence of the gel formulations. 5. To compare in vitro microdialysis and in vivo tape stripping data and attempt to establish a correlation between the two different approaches.
- Full Text:
- Date Issued: 2008
Development of a high pressure liquid chromatographic method for the simultaneous analysis of sulphamethoxazole and trimethoprim and its application to biological fluids and dissolution rate studies on solid oral dosage forms
- Authors: Gochin, Rosa
- Date: 1980
- Subjects: High performance liquid chromatography , Body fluids -- Analysis , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3735 , http://hdl.handle.net/10962/d1001524
- Description: Co-trimoxazole, a combination of a 5-to-l ratio of Sulphamethoxazole (SMZ) and Trimethoprim (TMP) , is a highly effective, broad-spectrum antibacterial agent. Since its introduction in 1968, it has been extensively used in infections of the respiratory and urinary tracts. Co-trimoxazole was developed by the systematic investigation of a series of compounds whose mechanism of action was already known. As early as 1950 synergy between sulphonamides and 2,4-diaminopyrimidines was reported. This was to be expected as both groups of drugs exert their antibacterial activity by interfering with the same biochemical pathway in bacteria. TMP was chosen from among many 2,4-diaminopyrimidines tested because of its good antibacterial activity and low toxicity. SMZ was chosen from the sulphonamides available for combination with TMP because of similarity of their biological half-lives. The widespread use of the combination coupled with the fact that monitoring of the levels of all drugs in the body is becoming increasingly important has stimulated research into rapid and efficient methods for the analysis of TMP and SMZ in biological fluids. Another consequence of the immense popularity of the combination is the appearance on the market of several generic preparations of Co-trimoxazole. It is now generally recognized that drug products from different manufacturers which are chemically equivalent may not be therapeutically equivalent. This is due to the fact that the absorption rate and/or bioavailability (extent of absorption) of a poorly soluble drug may be markedly affected by its release rate from the product and by its subsequent dissolution rate in gastrointestinal fluids. Hence bioequivalence of these various products should be established
- Full Text:
- Date Issued: 1980
- Authors: Gochin, Rosa
- Date: 1980
- Subjects: High performance liquid chromatography , Body fluids -- Analysis , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3735 , http://hdl.handle.net/10962/d1001524
- Description: Co-trimoxazole, a combination of a 5-to-l ratio of Sulphamethoxazole (SMZ) and Trimethoprim (TMP) , is a highly effective, broad-spectrum antibacterial agent. Since its introduction in 1968, it has been extensively used in infections of the respiratory and urinary tracts. Co-trimoxazole was developed by the systematic investigation of a series of compounds whose mechanism of action was already known. As early as 1950 synergy between sulphonamides and 2,4-diaminopyrimidines was reported. This was to be expected as both groups of drugs exert their antibacterial activity by interfering with the same biochemical pathway in bacteria. TMP was chosen from among many 2,4-diaminopyrimidines tested because of its good antibacterial activity and low toxicity. SMZ was chosen from the sulphonamides available for combination with TMP because of similarity of their biological half-lives. The widespread use of the combination coupled with the fact that monitoring of the levels of all drugs in the body is becoming increasingly important has stimulated research into rapid and efficient methods for the analysis of TMP and SMZ in biological fluids. Another consequence of the immense popularity of the combination is the appearance on the market of several generic preparations of Co-trimoxazole. It is now generally recognized that drug products from different manufacturers which are chemically equivalent may not be therapeutically equivalent. This is due to the fact that the absorption rate and/or bioavailability (extent of absorption) of a poorly soluble drug may be markedly affected by its release rate from the product and by its subsequent dissolution rate in gastrointestinal fluids. Hence bioequivalence of these various products should be established
- Full Text:
- Date Issued: 1980
Development and validation of an In Vitro Release Test (IVRT) to investigate the release of miconazole nitrate from topical cream formulations
- Authors: Purazi, Potiwa
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65223 , vital:28711
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
- Authors: Purazi, Potiwa
- Date: 2017
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/65223 , vital:28711
- Description: Expected release date-May 2019
- Full Text:
- Date Issued: 2017
Comparative bioavailability and ranking of topical corticosteroid formulations
- Authors: Meyer, Eric
- Date: 1985
- Subjects: Adrenocortical hormones -- Therapeutic use Drugs -- Bioavailability Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3732 , http://hdl.handle.net/10962/d1001471
- Description: Numerous experiments in recent years have indicated differences in the bioavailability of corticosteroids from seemingly identical topical dosage forms. The human blanching assay was utilized in this study to assess the comparative blanching activities of various locally manufactured proprietary corticosteroid preparations. The first experiment was performed to assess the relative blanching activities of six semi - solid preparations containing the same concentration of betamethasone 17-valerate. The preparations used were Betnovate cream and ointment, Persivate cream and ointment and Celestoderm-V cream and ointment. This was followed, in the second experiment, by the investigation of the blanching activities of two lotions containing betamethasone 17-valerate (Betnovate and Celestoderm-V) and a lotion containing betamethasone 17,21- dipropionate (Diprosone). The third experiment involved a study of six semi-solid proprietary corticosteroid-containing formulations, viz. Dermovate (clobetasol propionate) cream and ointment, Betnovate (betamethasone 17-valerate) cream and ointment and Eumovate (clobetasone butyrate) cream and ointment. This investigation was prompted by claims in advertisements in the medical media that Dermovate is therapeutically more efficacious than Betnovate which is more efficacious than Eumovate. The penultimate experiment in this study served the purpose of finding a corticosteroid-containing preparation that falls into the moderately potent group of corticosteroid formulations, as described in the United Kingdom MIMS. This preparation was used in the final experiment which was undertaken to ascertain the potency category of Florone (diflorasone diacetate) cream and ointment.
- Full Text:
- Date Issued: 1985
- Authors: Meyer, Eric
- Date: 1985
- Subjects: Adrenocortical hormones -- Therapeutic use Drugs -- Bioavailability Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3732 , http://hdl.handle.net/10962/d1001471
- Description: Numerous experiments in recent years have indicated differences in the bioavailability of corticosteroids from seemingly identical topical dosage forms. The human blanching assay was utilized in this study to assess the comparative blanching activities of various locally manufactured proprietary corticosteroid preparations. The first experiment was performed to assess the relative blanching activities of six semi - solid preparations containing the same concentration of betamethasone 17-valerate. The preparations used were Betnovate cream and ointment, Persivate cream and ointment and Celestoderm-V cream and ointment. This was followed, in the second experiment, by the investigation of the blanching activities of two lotions containing betamethasone 17-valerate (Betnovate and Celestoderm-V) and a lotion containing betamethasone 17,21- dipropionate (Diprosone). The third experiment involved a study of six semi-solid proprietary corticosteroid-containing formulations, viz. Dermovate (clobetasol propionate) cream and ointment, Betnovate (betamethasone 17-valerate) cream and ointment and Eumovate (clobetasone butyrate) cream and ointment. This investigation was prompted by claims in advertisements in the medical media that Dermovate is therapeutically more efficacious than Betnovate which is more efficacious than Eumovate. The penultimate experiment in this study served the purpose of finding a corticosteroid-containing preparation that falls into the moderately potent group of corticosteroid formulations, as described in the United Kingdom MIMS. This preparation was used in the final experiment which was undertaken to ascertain the potency category of Florone (diflorasone diacetate) cream and ointment.
- Full Text:
- Date Issued: 1985
Biopharmaceutics of phenylpropanolamine
- Authors: Dowse, Roslind
- Date: 1984
- Subjects: Biopharmaceutics Pharmacokinetics Phenylpropanolamine Pharmacology High performance liquid chromatography
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3818 , http://hdl.handle.net/10962/d1004915
- Description: Phenylpropanolamine (PPA), a sympathomimetic amine, has been widely used over the past 40 years as a decongestant and, in much larger dosages, as an appetite suppressant. Considerable interest has recently been shown in this drug due to its increasing popularity as an over-the-counter anorectic agent. Much controversy exists concerning the unfavourable side-effects of PPA resulting from the higher doses required for appetite suppression and the potential of this drug for abuse. A literature search revealed a paucity of information concerning the determination of PPA in biological fluids and, most noticeably, on the pharmacokinetics of this drug. An original method for determining PPA in serum and urine using high performance liquid chromatography (HPLC) which has increased sensitivity over other published HPLC methods is presented here. The simplicity of the extraction from biological fluids and subsequent determination by HPLC, enables concentrations of PPA to be monitored after a single dose of the drug. This method is therefore readily applicable to bioavailability and pharmacokinetic studies. The dissolution profiles of 4 sustained-release formulations of PPA were determined in a modified USP rotating paddle apparatus and the samples analysed using HPLC. A mathematical equation was applied to these data which are expressed in terms of dissolution parameters. Oral test dosage forms and solutions of PPA were investigated in bioavailability trials using the developed HPLC method to analyse the urine and serum samples. Linear one body compartment kinetics were assumed and the WagnerNelson method used to transform in vivo serum data to absorption plots which were then fitted to the well known Weibull equation. In order to more appropriately characterize the kinetic processes of absorption, distribution and elimination, a more complex model was utilized which involved numerical integration of a series of differential equations. The data were fitted to these models using nonlinear regression techniques. The pharmacokinetics of PPA are shown to exhibit some evidence of nonlinearity. The absorption of the drug appears to be di scontinuous and PPA seems to favour a two body compartment model.
- Full Text:
- Date Issued: 1984
- Authors: Dowse, Roslind
- Date: 1984
- Subjects: Biopharmaceutics Pharmacokinetics Phenylpropanolamine Pharmacology High performance liquid chromatography
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3818 , http://hdl.handle.net/10962/d1004915
- Description: Phenylpropanolamine (PPA), a sympathomimetic amine, has been widely used over the past 40 years as a decongestant and, in much larger dosages, as an appetite suppressant. Considerable interest has recently been shown in this drug due to its increasing popularity as an over-the-counter anorectic agent. Much controversy exists concerning the unfavourable side-effects of PPA resulting from the higher doses required for appetite suppression and the potential of this drug for abuse. A literature search revealed a paucity of information concerning the determination of PPA in biological fluids and, most noticeably, on the pharmacokinetics of this drug. An original method for determining PPA in serum and urine using high performance liquid chromatography (HPLC) which has increased sensitivity over other published HPLC methods is presented here. The simplicity of the extraction from biological fluids and subsequent determination by HPLC, enables concentrations of PPA to be monitored after a single dose of the drug. This method is therefore readily applicable to bioavailability and pharmacokinetic studies. The dissolution profiles of 4 sustained-release formulations of PPA were determined in a modified USP rotating paddle apparatus and the samples analysed using HPLC. A mathematical equation was applied to these data which are expressed in terms of dissolution parameters. Oral test dosage forms and solutions of PPA were investigated in bioavailability trials using the developed HPLC method to analyse the urine and serum samples. Linear one body compartment kinetics were assumed and the WagnerNelson method used to transform in vivo serum data to absorption plots which were then fitted to the well known Weibull equation. In order to more appropriately characterize the kinetic processes of absorption, distribution and elimination, a more complex model was utilized which involved numerical integration of a series of differential equations. The data were fitted to these models using nonlinear regression techniques. The pharmacokinetics of PPA are shown to exhibit some evidence of nonlinearity. The absorption of the drug appears to be di scontinuous and PPA seems to favour a two body compartment model.
- Full Text:
- Date Issued: 1984
Biopharmaceutics and pharmacokinetics of the macrolide antibiotic Josamycin
- Authors: Skinner, Michael Fredrick
- Date: 1992
- Subjects: Antibiotics -- Bioavailability , Antibiotics -- Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3791 , http://hdl.handle.net/10962/d1003269
- Description: The investigations detailed herein have been conducted to address various aspects of the biopharmaceutics and pharmacokinetics of josamycin which to-date, have received little or no attention in the literature. Areas of investigation have included the selective determination of josamycin in serum and urine samples, the stability of josamycin in stored biological samples, intrinsic dissolution rates, solubility, acid and alkali stability and bioavailability and pharmacokinetics after dosing with a solution, powder and tablets. High performance liquid chromatography (HPLC) was used as the main analytical tool throughout these studies and proved to be highly versatile for the determination of josamycin in a number of different media. HPLC analysis afforded simple yet accurate determination of josamycin in samples from dissolution, solubility, tablet content and stability studies. Furthermore, the specificity afforded by HPLC was particularly useful for the separation of josamycin from degradation products formed in acid and alkali media. Since metabolites of josamycin are microbiologically active, microbiological assays do not determine the concentration solely of josamycin. An analytical method capable of the selective determination of josamycin in serum and urine samples is therefore required for the procurement of reliable bioavailability and pharmacokinetic data. HPLC affords this selectivity and a method for the selective determination of josamycin in serum and urine was successfully developed. The assay was simple yet precise, accurate and sensitive. Furthermore, it was well suited to the determination of josamycin in a large number of biological samples. Its success was largely due to the use of a solid phase extraction step using C₁₈ extraction columns, with a highly specific wash sequence followed by a phase separation step after elution from the extraction column. Chromatography was performed on a C₁₈ reversed-phase analytical column with UV detection of josamycin and internal standard at 231 nm and at 204 nm respectively using a programmable multi-wavelength detector. Only slight modification of the assay described should enable the selective determination of the metabolites of josamycin. This assay, therefore, lays the groundwork for future investigations into the pharmacokinetics of these metabolites. The re-usability of extraction columns was assessed in an attempt to reduce the cost of sample analysis. It was found that extraction columns could be used twice for the extraction of serum samples and up to four times for the extraction of urine samples. The difference between the re-usability of extraction columns for serum and urine samples was ascribed to various differences in the composition of the sample matrix. The stability of josamycin in stored serum and urine samples was also assessed.
- Full Text:
- Date Issued: 1992
- Authors: Skinner, Michael Fredrick
- Date: 1992
- Subjects: Antibiotics -- Bioavailability , Antibiotics -- Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3791 , http://hdl.handle.net/10962/d1003269
- Description: The investigations detailed herein have been conducted to address various aspects of the biopharmaceutics and pharmacokinetics of josamycin which to-date, have received little or no attention in the literature. Areas of investigation have included the selective determination of josamycin in serum and urine samples, the stability of josamycin in stored biological samples, intrinsic dissolution rates, solubility, acid and alkali stability and bioavailability and pharmacokinetics after dosing with a solution, powder and tablets. High performance liquid chromatography (HPLC) was used as the main analytical tool throughout these studies and proved to be highly versatile for the determination of josamycin in a number of different media. HPLC analysis afforded simple yet accurate determination of josamycin in samples from dissolution, solubility, tablet content and stability studies. Furthermore, the specificity afforded by HPLC was particularly useful for the separation of josamycin from degradation products formed in acid and alkali media. Since metabolites of josamycin are microbiologically active, microbiological assays do not determine the concentration solely of josamycin. An analytical method capable of the selective determination of josamycin in serum and urine samples is therefore required for the procurement of reliable bioavailability and pharmacokinetic data. HPLC affords this selectivity and a method for the selective determination of josamycin in serum and urine was successfully developed. The assay was simple yet precise, accurate and sensitive. Furthermore, it was well suited to the determination of josamycin in a large number of biological samples. Its success was largely due to the use of a solid phase extraction step using C₁₈ extraction columns, with a highly specific wash sequence followed by a phase separation step after elution from the extraction column. Chromatography was performed on a C₁₈ reversed-phase analytical column with UV detection of josamycin and internal standard at 231 nm and at 204 nm respectively using a programmable multi-wavelength detector. Only slight modification of the assay described should enable the selective determination of the metabolites of josamycin. This assay, therefore, lays the groundwork for future investigations into the pharmacokinetics of these metabolites. The re-usability of extraction columns was assessed in an attempt to reduce the cost of sample analysis. It was found that extraction columns could be used twice for the extraction of serum samples and up to four times for the extraction of urine samples. The difference between the re-usability of extraction columns for serum and urine samples was ascribed to various differences in the composition of the sample matrix. The stability of josamycin in stored serum and urine samples was also assessed.
- Full Text:
- Date Issued: 1992
Assessment of pharmaceutical equivalence of topical cream products containing hydrocortisone acetate using in vitro release testing (IVRT)
- Mudyahoto, Nyengeterai Amanda
- Authors: Mudyahoto, Nyengeterai Amanda
- Date: 2018
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63384 , vital:28404
- Description: Expected release date-April 2020
- Full Text:
- Date Issued: 2018
- Authors: Mudyahoto, Nyengeterai Amanda
- Date: 2018
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63384 , vital:28404
- Description: Expected release date-April 2020
- Full Text:
- Date Issued: 2018
Application of in vitro release testing (IVRT) to assess “sameness”/differences of topical clotrimazole formulations
- Wellington, Hannah Margaret Mary
- Authors: Wellington, Hannah Margaret Mary
- Date: 2023-10-13
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/419599 , vital:71658
- Description: Embargoed. Possible release date early 2025 pending publications. , Thesis (MSC Pharm) -- Faculty of Pharmacy, 2023
- Full Text:
- Date Issued: 2023-10-13
- Authors: Wellington, Hannah Margaret Mary
- Date: 2023-10-13
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/419599 , vital:71658
- Description: Embargoed. Possible release date early 2025 pending publications. , Thesis (MSC Pharm) -- Faculty of Pharmacy, 2023
- Full Text:
- Date Issued: 2023-10-13