Combined and additive effects of assembly tasks and constrained body postures
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
- Date Issued: 2007
Appropriate integration of workers with physical limitations into a manual workplace – development of an assessment tool
- Authors: Pearson, Jessie T
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/8209 , vital:21368
- Description: Background: People with physical limitations can contribute significantly to society and the economy, however, barriers to full and effective participation in the labour market often hinder decent employment. In light of this, placement decisions of impaired workers should be based on detailed information of the nature of the jobs available, as well as individual capabilities of the worker. An ergonomics approach to design attempts to achieve an appropriate balance between the capabilities of the worker and the requirements of the task and uses this balance to improve productivity and encourage physical and mental well-being, job satisfaction and safety. A specific analysis tool which can be applied to various workplaces and jobs, and provide information for decisions regarding placement of physically limited workers, will help to increase the percentage of correct placement in an appropriate workplace, resulting in optimum productivity and worker safety. Methods: An assessment tool which allows matching of job requirements and worker capabilities was developed based on a theoretical framework from Mattison and Goebel (2007), as well as principles defined by Almgren and Schaurig (2012) and Demura and Nakada (2010). The tool assesses range of motion, force and time components of the physical requirements of different tasks involved in the job, as well as movement capabilities and limitations of the worker. The tool was pilot tested in a case study with an above the knee amputee working at a research facility. Results: The tool successfully provided information regarding the matching of the work to the identified job. The output of the tool highlighted two tasks which would place the worker at risk due to physical requirements of the tasks being greater than movement capabilities of the worker. These tasks need to be further investigated to determine if accommodations can be made to assist the worker in safely performing the task, or if the job is not suitable for the worker. Conclusions: The tool developed was useful in providing information to inform appropriate placement of the physically limited worker. Further research needs to be done to validate and determine reliability of the tool.
- Full Text:
- Date Issued: 2017
Assessing the physical fitness level of children with intellectual disability in the Grahamstown region of the Eastern Cape, and subsequently designing, implementing and evaluating the efficacy of an exercise intervention
- Authors: Parsons, Samantha Lee
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/19723 , vital:22478
- Description: Background: Extensive research has addressed physical fitness as an agent in promoting health and well-being; however, there is little research on this topic for special populations, such as individuals with intellectual disability and even less relating to the South African context. Children with intellectual disability attending special need schools in disadvantaged communities in the Eastern Cape have lacked the opportunity to participate in structured physical education programs. Implementing a solution to this problem was seen to be a challenge, due to the lack of informative research and available data. Aims: The purpose of this research was two-fold; firstly, it aimed to identify the physical fitness levels of the intellectually disabled children in the Grahamstown region of the Eastern Cape province of South Africa; and secondly, it aimed to implement and evaluate the efficacy of an exercise intervention programme on physical fitness in a local school for children with intellectual disability. Phase 1: The descriptive study compared basic anthropometric as well as physical fitness measures from a sample of participants with intellectual disability (n=29) with a comparable sample of typically developed children (n=25). There were 15 males and 14 females in the intellectually disabled sample group, with an average age of 10.69 ± 1.26 years, and the typically developed sample had 13 males and 12 females, with an average age of 10.51 ± 0.74 years. The anthropometric measures included stature and mass; while the health-related physical fitness components included cardiorespiratory endurance, muscular endurance, strength, body composition, and flexibility; and the skill-related physical fitness components were balance, agility, speed, power, coordination and reaction time. The results revealed that the children with intellectual disability were significantly shorter in stature and lighter in mass (p <0.001) compared to their typically developed peers. Muscular endurance and strength, balance, speed, power, coordination and reaction time were poorer among those with intellectual disabilities (p <0.05). Cardiorespiratory endurance, flexibility and agility were similar between groups. Results of the correlation analyses determined significant (p <0.05) relationships between certain health-related and/or skill-related physical fitness components, which were instrumental for selecting measures for Phase 2. The physical fitness components that had the most significant (p <0.05) correlations were speed with five significant correlations, both muscular endurance and balance with six, coordination with seven, and power with eight significant correlations of the eleven physical fitness components. The comparative results, in conjunction with the correlations, determined that the most suitable physical fitness components to be implemented in the exercise intervention for Phase 2 were muscular endurance, balance, and power. Phase 2: The intervention study was a case-control study (intervention group: n = 16; control group: n = 15), whereby the intervention group was exposed to an 8-week multi-modal exercise intervention training muscular endurance, balance and power. Pre-and post-intervention measures were performed using the same eleven physical fitness tests as in Phase 1. The interaction effects and effect sizes were determined and the results showed significant improvements and large effect sizes for the intervention group’s performance of muscular endurance (p=0.026; d=0.617) and power (p<0.000; d=0.999), whereas no significant changes were found for balance. Furthermore, the exercise intervention also impacted the overall level of physical fitness, as significant changes were found for cardiorespiratory endurance (p<0.001; d=0.98), strength (p=0.021; d=0.654) and flexibility (p=0.032; d=586). In conclusion, the exercise intervention was effective for improving the intellectually disabled participants’ muscular endurance and power but not found effective for balance.
- Full Text:
- Date Issued: 2017
Awkward working postures and precision performance as an example of the relationship between ergonomics and production quality
- Authors: Ngcamu, Nokubonga Slindele (Sma)
- Date: 2009
- Subjects: Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5105 , http://hdl.handle.net/10962/d1005183 , Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Description: Ergonomics aims to improve worker health and enhance productivity and quality. Knowledge and practical evidence of this relationship would be instrumental for optimising organisational performance particularly in industrially developing countries where the discipline is still in its developmental stages. Therefore this thesis set out to analyse the relationship between ergonomics deficiencies and performance. A survey was first conducted to establish the severity of quality problems in the South African manufacturing industry and to determine if these were related to Ergonomic deficiencies. The results indicated that quality problems continue to plague industry, a challenge associated with huge cost implications. Furthermore organisations were not cognisant of the fact that ergonomics deficiencies such as poor workstation design and awkward or constrained working postures are a major contributing factor to poor quality and performance decrements. This demonstrates that much is yet to be done in raising awareness about the benefits of ergonomics in South Africa and other industrially developing countries. However, for this to be effective, tangible evidence of these purported benefits is required. In lieu of this, a laboratory study was then conducted to establish the relationship between awkward working postures and the performance of precision tasks. Acknowledging that the task and the worker are interrelated elements, the impact of precision task demands on the postural strain experienced by the human was also investigated. A high and low precision task quantified positional precision while a force task (combination of pushing and pulling) was utilised to assess the ability to maintain a precise force over time. These three tasks were performed in eight different postures; namely seated, standing, stooping 300 and 600, working overhead, lying supine, and twisting to either side. A combination of the tasks and postures resulted in 24 experimental conditions that were tested on forty eight healthy male and female participants. The performance related dependent variables were movement time, deviation from the centre of the target, and the trend/slope followed by the force exerted. Muscle activity of eight arm, shoulder and back muscles, iii supplemented with heart rate and local ratings of perceived exertion, were utilised to quantify the impact of the tasks and the postures on the individual. The results revealed that awkward working postures do in fact influence performance outcomes. In this regard, awkward working postures (such as overhead work and lying supine and stooping) were evidenced to significantly affect movement time, deviations from the target and the ability to maintain a constant force over time. These variables have a direct relationship with organisational priorities such as productivity and quality. Furthermore, the results indicated that high precision demands augment postural strain elicited through high muscle activity responses and may have negative implications for the precipitation of musculoskeletal disorders. Essentially, the work done on this thesis reflected the complex nature of ergonomics by drawing on both macro and micro-ergonomics approaches. In so doing, challenges perceived to be relevant to industry as reported by organisations formed the foundation for further laboratory studies. Therefore, more collaborative research and knowledge transfer between industry and ergonomics researchers is a necessity particularly in industrially developing countries where ergonomics is still in its developmental stages.
- Full Text:
- Date Issued: 2009
A comparison of muscle fatigue responses between static and quasi-static exertions
- Authors: Nel, Conrad
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3475 , vital:20502
- Description: Background: This study examined localized muscle fatigue responses from sub-maximal quasi-static work protocols and additionally how it compares to purely static work. The goal was to produce research that enhances the understanding of the demands on muscles during manual work to aid in preventing injuries stemming from localized muscle fatigue. Injury rates remain a problem in manual labour sectors, particularly for the lower back and shoulder regions for the manufacturing, service and construction sectors, and for knee and elbow flexors in the sports sector. Few studies have looked at quasi-static work and what the resulting fatigue characteristics are, especially when compared to purely static or purely dynamic work. This comparison is particularly important due to the fact that risk assessment tools that are currently utilized to assess risk in the working environment are based on fatigue studies that focus on purely static or purely dynamic work. This requires attention as many working situations are neither static nor dynamic, but rather quasi-static in nature, with aspects of both dynamic and static muscle components. The scope of this study only encompasses the comparison between purely static and quasi-static work. Objectives: This study had two objectives, firstly, to determine what the fatigue characteristics of quasi-static work are and how it compares to fully static work. Secondly, to determine whether an underlying static component within an otherwise dynamic muscle force affects localized muscle fatigue compared to quasi-static work that has equal amounts of effort but with no underlying static component. Methods: Four experimental conditions were tested, each on four muscles, namely the medial deltoid, bicep brachii, bicep femoris and erector spinae muscles. To test the two objectives of this study, 16 volunteers performed a five minute fatigue protocol, that either entailed a fully static condition which involved: 1) producing a steady force at 25 percent of maximum voluntary force, 2) a quasi-static condition with fully dynamic muscle force that alternates the required force level between zero and 50 percent of maximum force, 3) a quasi-static condition with an underlying static component of five percent of maximum force, or 4) a quasi-static condition with a large underlying static component of 15 percent of maximum force. All the experimental conditions in this study had the same average workload of 25 percent of maximum voluntary force over time and thus total workload. The dependant variables of interest were ratings of perceived exertion, changes in muscle fibre recruitment (% of maximum EMG activity), maximum force and center frequency from a spectral analysis of the surface electromyography. These were measured throughout the protocols at one minute intervals to determine how muscle fatigue progressed, and how the fatigue responses differed between conditions. Results: The data from comparing fully static and quasi-static work showed that of the variables measured, the rating of perceived exertion (RPE) and maximum force data indicated that for bicep brachii and bicep femoris muscles, fully static work is more fatiguing than work that alternates between zero and 50 percent of maximum force. The results for the medial deltoid and erector spinae muscles were inconclusive. The findings regarding the comparison between quasi-static conditions with and without an underlying static component revealed that an underlying static component results in greater fatigue when compared to a quasi-static condition with no static component. The results may also suggest that a larger static component coupled with a smaller peak force results in less fatigue than a condition with a small underlying static component coupled with a higher peak force in some scenarios, provided total work is kept constant. All conditions had to have the same workload in order to be validly compared and thus the condition with a larger underlying static component had a lower peak force compared to the condition with no underlying static component or the condition with a small underlying static component. Conclusions: This study presented evidence that quasi-static work does not induce fatigue when measured by RPE and drop in maximum force in the same way as static work. Additionally, the results indicate that a larger underlying static component does not necessarily fatigue a muscle faster if the overall workload is kept constant. However, the results do suggest that any underlying static component will increase the demand on a muscle when compared to a muscle exertion with no static component. When considering the available literature on how muscles fatigue during low level static contractions, the current understanding is that the larger the force during a static contraction, the faster the onset of fatigue and decrements in performance occur. The results of this study suggest that this same relationship cannot be applied to quasi-static work where an underlying static component is part of an otherwise dynamic muscle force. Thus total workload or peak force may play a larger role than the static muscle exertion in some scenarios.
- Full Text:
- Date Issued: 2016
South African anthropometric dimensions for the design of an ergonomic office chair
- Authors: Korte, Janice
- Date: 2013 , 2013-09-05
- Subjects: Design -- Human factors , Office chairs , Chair design , Human engineering , Sitting position
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5137 , http://hdl.handle.net/10962/d1006046 , Design -- Human factors , Office chairs , Chair design , Human engineering , Sitting position
- Description: Office chairs are becoming a modern status symbol in the workplace. Many individuals are seated on office chairs for most of the working day. As a result of using poorly designed chairs injury and discomfort are frequently experienced, most particularly lower back pain. Correct design of chairs is imperative, and must be user-centered. The aim of this investigation has been to gather anthropometric dimensions characteristic of the South African population, as this information has not been widely assimilated to date. Once collated, this information could be used in the design of an ergonomically correct office chair, suitable for the unique characteristics of the South African working population. Anthropometric dimensions were collected from 683 South Africans (comprising 448 South African females and 235 South African males) from pre-selected companies in major centres in South Africa (Johannesburg, Pietermaritzburg, Durban, East London, Grahamstown, Port Elizabeth and Cape Town). Measurements included participants’ personal information (age, sex, home language and ethnic group), basic anthropometric measures (stature, shoulder height, mass, and waist and hip circumference) as well as specific measures of fit of the individual to the specially designed, adjustable chair. Of the 448 females, 317 were Black females, 77 were White females, 35 were Coloured females and 19 were Indian/Asian females. Of the 235 males, 112 were Black males, 79 were White males, 26 were Coloured males and 18 were Indian/Asian males. Office chair dimensions for each ethnic group were represented and differences were noted. A comparison between a current office chair’s dimensions and the South African sample office chair’s dimensions indicated modifications that would need to be constructed to suit the South African sample. The conventional office chair is still the most widely accepted office chair due to its stability and support structures that maintain the correct sitting posture of the user. An ergonomic office chair needs to incorporate anthropometric dimensions worldwide.
- Full Text:
- Date Issued: 2013
The effects of the type of rest breaks on return-to-task performance in semi-automated tasks with varying complexities
- Authors: Hoyi, Zandile
- Date: 2017
- Subjects: Rest periods , Rest periods -- Physiological effect , Human-robot interaction , Aeronautics -- Human factors , Human engineering , Drowsiness
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/44490 , vital:25412
- Description: Automation in the aviation industry is acknowledged as a useful tool in reducing pilot workload (Hoh, Smith & Hinton, 1987; Beringer & Harris Jr., 1999). Typically, the role of the pilot (operator) shifts from active participation in a process to a task of monitoring the system with the resumption of control should the automation ‘fail’ (Byrne & Parasuraman, 1996). Unfortunately, the skills necessary to do so would likely degrade from non-use, during this process (Landry, 2012). This project investigates the “attentional demands” for the human operator during interaction with semi-automated operations of the flight. According to Dr Abbott (1996), FAA human factors specialist, one of the problems causing disharmony between crews and their automated systems is the incorrect upset recovery, owing to the human being out-of-the-loop (OOTL) from the system. Recovery, or rather return to task, is the ability of the pilot to loop back into control, once situational awareness has been decreased due to lack of alertness and a decrease in arousal. Different types of rest tasks are commonly prescribed fatigue countermeasures in the industrial setting and have been showed to elicit beneficial effects on prolonged human performance. Understanding the effects of different rest break activity and time out-of-the-loop during semi-automated flying on return to task performance has been adequately studied, thus highlighting its importance in the context of flight safety. The present study requested participants to perform a tracking task in a laboratory where they changed from activity (30 minutes) to a break (2 vs. 30 minutes) and back to the activity (20 minutes). The task varied in the complexity of the activity (pure tracking vs. tracking plus memory plus rule-based decision making), the type of break (passive rest vs. actively supervising) and the duration of the break (2 minutes vs. 30 minutes). Performance was measured as effective response time in the tracking task and number of correct responses to secondary cognitive tasks. Physiological measures included heart rate (HR), heart rate variability (HRV- time and frequency-domain), eye blink frequency and duration. The Karolinska Sleepiness Scale was used as a subjective measure. With regards to the most appropriate rest break tasks, the study concluded that active, administrative tasks, which allowed the operator to maintain some form of situational awareness by monitoring the automated system, achieved favourable effects of being more alert than the passive rest break of being disengaged from the system. In terms of the most appropriate rest break durations, the shorter duration of being out-of-the-loop from controlling the system proved to be more advantageous than the longer out-of-the-loop duration. In looking at the workload levels of arousal, the results suggest that the higher workload level is better at maintaining the alertness of operators. This study functions as a foundational framework for future investigations around the topic of human-automation interaction, looking specifically at return-to-task performance.
- Full Text:
- Date Issued: 2017
The impact of low to moderate alcohol consumption on different types of human performance
- Authors: Goble, David
- Date: 2013
- Subjects: Alcohol -- Physiological effect Temperance Human information processing -- Effect of drugs on Visual perception -- Effect of drugs on Cognition -- Effect of drugs on Caffeine -- Physiological effect
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5136 , http://hdl.handle.net/10962/d1006042
- Description: Despite extensive research into the effects of alcohol consumption, there is no clear understanding into the mechanisms underlying human information processing impairment. The acute consumption of alcohol was investigated to determine the implications for human information processing capabilities, and to identify the extent to which these implications were stage-specific. Further aims included the investigation and quantification of caffeine-induced antagonism of alcohol impairment. Moreover, the aforementioned relationships were investigated in morning versus evening conditions. A test battery of six resource-specific tasks was utilised to measure visual perceptual, cognitive and sensory-motor performance, fashioned to return both simple and complex measures of each task. The tasks implemented were: visual perceptual performance (accommodation, visual detection, visual pattern recognition); cognition (memory recall- digit span); and motor output (modified Fitts‟ and a driving simulated line-tracking). Performance measures were recorded by the respective computer based tasks. Physiological variables measured included heart rate frequency, heart rate variability (RMSSD, High and Low Frequency Power) and body temperature. Saccade speed, saccade amplitude, pupil size and fixation duration were the oculomotor parameters measured. Three groups of participants (alcohol, caffeine+alcohol and control) n=36 were studied, split evenly between sexes in a mixed repeated/non-repeated measures design. The control group performed all test batteries under no influence. The alcohol group performed test batteries one and two sober, and three and four under the influence of a 0.4 g/kg dose of alcohol. Group caffeine+alcohol conducted test battery one sober, two under the effect of caffeine only (4 mg/kg), and three and four under the influence of both caffeine and alcohol (0.4 g/kg). The third test battery demonstrated the effects of alcohol during the inclining phase of the blood alcohol curve, and the fourth represented the declining phase. Morning experimentation occurred between 10:00 - 12: 45 and 10:30 -13:15 with evening experimentation between 19:00 - 21:30 and 19:30 - 22:00. Acute alcohol consumption at a dose of approximately 0.4 g/kg body weight effected an average peak breath alcohol concentration of 0.062 % and 0.059 % for the alcohol and caffeine+alcohol groups respectively. Task-related visual perceptual performance demonstrated significant decrements for simple reaction time, choice reaction time and error rate. Cognitive performance demonstrated no significant performance decrements, while motor performance indicated significant decrements in target accuracy only. Physiological parameters in response to alcohol consumption showed significantly decreased heart rate variability (RMSSD) in the modified Fitts‟ task only. A significant decrease in saccade amplitude in the memory task was the only change in oculomotor parameters. Prior caffeine consumption demonstrated limited antagonism to task-related alcohol impairment, significantly improving performance only in reduced error rate while reading. Caffeine consumption showed stimulating effects on physiological parameters, significantly increasing heart rate and heart rate variability when compared to alcohol alone. The design of the tasks allows for comparison between complex and simple task performance, indicating resource utilisation and depletion. Complex tasks demonstrated higher resource utilisation, however with no statistical performance differences to simple tasks. Physiological parameters showed greater change in response to alcohol consumption, than did the performance measures. Alcohol consumption imposed significant changes in physiological and oculomotor parameters for cognitive tasks only, significantly increasing heart rate frequency and decreasing heart rate variability, skin temperature and saccade amplitude. Caffeine consumption showed no antagonism of alcohol-induced performance measures. Physiological measures showed that caffeine consumption imposed stimulating effects in only the neural reflex and memory tasks, significantly increasing heart rate frequency and heart rate variability. Prior caffeine consumption significantly decreased fixation duration in the memory task only. The time of day at which alcohol was consumed demonstrated significant performance and physiological implications. Results indicated that morning consumption of alcohol imposes greater decrements in performance and larger fluctuations in physiological parameters than the decrements in evening experimental sessions. It can be concluded that alcohol consumption at a dose of 0.4 g/kg affects all stages in the information processing chain. Task performance indicates that alcohol has a greater severity on the early stages of information processing. Conversely, under the influence of alcohol an increased task complexity induces greater effects on central stage information processing. In addition, caffeine consumption at a dose of 4 mg/kg prior to alcohol does not antagonise the alcohol-induced performance decrements.
- Full Text:
- Date Issued: 2013
The effects of sustained attention, workload and task-related fatigue on physiological measures and performance during a tracking task
- Authors: De Gray Birch, Casey
- Date: 2012
- Subjects: Fatigue -- Physiological aspects -- Research , Attention -- Physiological aspects -- Research , Human engineering -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5120 , http://hdl.handle.net/10962/d1005198 , Fatigue -- Physiological aspects -- Research , Attention -- Physiological aspects -- Research , Human engineering -- Research
- Description: Despite extensive research into the concept of mental fatigue there is as yet no “gold standard” definition or measurement technique available. Because of this a large amount of fatigue-related errors are still seen in the workplace. The complexity of the problem lies with the inability to directly measure mental processes as well as the various endogenous and exogenous factors that interact to produce the experienced fatigue. Fatigue has been divided into sleep-related and task-related fatigue; however the task-related aspect is evident both during normal waking hours as well as during periods of sleep deprivation, therefore this aspect is considered important in the understanding of fatigue in general. The concept of task-related fatigue has further been divided into active and passive fatigue states; however differentiation between the two requires careful consideration. Various physiological measures have been employed in an attempt to gain a better understanding of the mechanisms involved in the generation of fatigue, however often studies have produced dissociating results. The current study considered the task-related fatigue elicited by a tracking task requiring sustained attention, in order to evaluate the usefulness of various cardiovascular and oculomotor measures as indicators of fatigue. A secondary aim was to determine whether the behavioural and physiological parameter responses could be used to infer the type of fatigue incurred (i.e. an active versus passive fatigue state) as well as the energetical mechanisms involved during task performance. A simple driving simulator task was used as the main tracking task, requiring constant attention and concentration. This task was performed for approximately two hours. Three experimental groups (consisting of 14 subjects each) were used: a control group that performed the tracking task only, a group that performed a five minute auditory memory span task concurrently with the driving task after every 20 minutes of pure driving, and a group that performed a visual choice reaction task for five minutes following every 20 minute driving period. The secondary tasks were employed in order to evaluate the extent of resource allocation as well as arousal level. Performance measures included various driving performance parameters, as well as secondary task performance. Physiological measures included heart rate frequency (HR) and various time- and frequency-domain heart rate variability (HRV)parameters, pupil dilation, blink frequency and duration, fixations, and saccadic parameters as well as critical flicker fusion frequency (CFFF). The Borg CR-10 scale was used to evaluate subjective fatigue during the task, and the NASA-TLX was completed following the task. A decline in driving performance over time was supplemented by measures such as HR, HRV and pupil dilation indicating an increase in parasympathetic activity (or a reduction in arousal). An increase in blink frequency was considered as a sign of withdrawal of attentional resources over time. Longer and faster saccades were also evident over time, coupled with shorter fixations. With regards to the secondary task influence, the choice RT task did not affect any behavioural or physiological parameters, thereby contesting the active fatigue theory of resource depletion, as well as implying that the increase in demand for the same resources used by the primary task was insufficient to affect the state of the subjects. The increased load elicited by the memory span task improved driving performance and increased measures of HR, HRV, pupil dilation and blink frequency. Some of these measures produced opposite effects to what was expected; an attempt to explain the dissociation of the various physiological parameters was expressed in terms of arousal, effort and resource theories. Overall, the results indicate that the fatigue and/or reduced arousal accompanying a monotonous sustained attention task can, to some degree, be alleviated through intermittent performance of a secondary task engaging mental resources other than the ones used for the primary task. The degree to which such a task is beneficial, however, requires careful consideration as while an immediate increase in arousal and primary task performance is noted, the impact of the task on general attentional resources may be detrimental in the case of reacting should an emergency situation occur.
- Full Text:
- Date Issued: 2012
The impact of a one-hour self-selected nap opportunity on physiological and performance variables during a simulated night shift
- Authors: Davy, Jonathan Patrick
- Date: 2010
- Subjects: Night work , Naps (sleep) in the workplace , Naps (sleep) in the workplace -- Case studies , Shift systems
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5123 , http://hdl.handle.net/10962/d1005201 , Night work , Naps (sleep) in the workplace , Naps (sleep) in the workplace -- Case studies , Shift systems
- Description: Napping has been explored extensively as a means of counteracting the negative effects associated with shift work. A significant amount of this research has focused on the implementation of scheduled naps, with few studies considering flexible nap schemes. The current study therefore aimed to assess the effects of a flexible nap opportunity on the physiological, cognitive, performance, neurophysiological and subjective responses of a group of non shift workers over the course of a three-day simulated night shift regime. Additional foci were the effects of the nap condition on the extent of the circadian adaptation of the subjects to the irregular work schedule and the circadian-related influences associated with being awake during the night. 36 subjects – 18 males and 18 females – were recruited to participate in the current study. The data collection spanned twelve days, during which four, three-day long shift cycles were set up: three night shift cycles and one day shift cycle. During each night shift cycle, three separate experimental conditions were staggered, namely the nap condition, the no nap condition and a booster break condition (a collaborative study that completed the setup). The day shift served as a further comparison. Each cycle comprised of 12 subjects, which meant there were four subjects per condition during each cycle. The shifts were 8 hours in duration, with the no nap group following a standard break schedule evinced in industry. The three breaks taken during the shifts amounted to a total time of 1 hour. The nap group was afforded a 1 hour flexible nap opportunity between 00h00 and 03h00 with no other breaks. Therefore, both conditions had the same amount of work time. During the shifts, subjects performed two simple, low arousal tasks (beading and packing) and completed a test battery roughly every two hours which was comprised of physiological, performance, neurophysiological and subjective measures. It was found that the inclusion of the nap opportunity significantly improved output performance and response time during a low precision, modified Fitts tapping task over the course of three night shifts, relative to no napping. Physiologically, napping resulted in higher heart rate frequency measures by the end of the shifts, which were also accompanied by significant reductions in subjective sleepiness ratings during all iii the night shifts. The nap group’s responses in this case, did not differ significantly from those of the day shift. Both simple reaction time and memory performances improved as a result of the nap inclusion, but only during the third night shift. The majority of the measures included in the research also depicted the effects of the circadian rhythm, which was indicative of the pronounced effect that this natural biological down regulation has on performance during the night. Napping reduced the severity of these effects during beading performance and measures of subjective sleepiness. With regard to habituation, the nap opportunity also resulted in positive changes in the responses of beading performance, high precision response time, simple reaction time and both subjective sleepiness measures, relative to no napping. Sleep diary responses indicated that although sleep length and quality during the day were significantly reduced for both night-time conditions, recovery sleep (length and quality) for the nap group did not differ significantly from the no nap group. The findings of this research indicate that the inclusion of a flexible napping opportunity during the night shift had positive effects on some physiological, performance and subjective responses, and that this intervention is as beneficial as scheduled napping. Specifically, napping resulted in a significantly higher output during the beading task, relative to the no nap group despite the duration of work time being the same. As such the introduction of a flexible, self-selected nap opportunity is a practical, effective and individual-specific means of alleviating the negative effects of shift work, while improving certain performance parameters. Therefore, industries should consider its inclusion in their fatigue management programs. However, contextspecific considerations must be made, with regard work scheduling, individual differences and task demands when implementing such an intervention. This will ensure that its introduction will be well received and in time, lessen the health and work-related decrements associated with shift work.
- Full Text:
- Date Issued: 2010
Effects of colours, shapes and icons on performance and familiarity
- Authors: Dambuza, Inga Yola
- Date: 2011
- Subjects: Industrial hygiene -- Research -- South Africa , Industrial safety -- Research -- South Africa , Industrial hygiene -- Standards -- South Africa , Human engineering -- Research -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5117 , http://hdl.handle.net/10962/d1005195 , Industrial hygiene -- Research -- South Africa , Industrial safety -- Research -- South Africa , Industrial hygiene -- Standards -- South Africa , Human engineering -- Research -- South Africa
- Description: Occupational injuries and illnesses remain to be a heavy burden on workers and employees in industrial developing and industrially developed societies, and health and safety in workplaces continues to be an important issue for ergonomists. Steps are being taken to stimulate health and safety agendas and to discover ways in which health and safety in industries can be improved. The main responsibility of employers is to provide employees with information, instructions and training that they required to carry out their work tasks in a healthy, practical and safe manner. The role of education as a countermeasure to occupational injury and illness is being re-examined by health and safety practitioners and safety training is being considered as a vital part of accident prevention strategies. Effective training programmes should guarantee that workers possess the skills they require to complete their tasks in a safe and healthy manner. Very little is known about the type and quality of training workers undergo and how that training affects the safety outcomes of companies. There has been an attempt over the past 20 years to increase the research on safety communications and a great deal of this research has been focused on safety warnings; with the greatest attention been placed on the components of safety signs, such as colours, size, shapes and icons. The effects of these components on comprehension with relation to age and education have not received the same amount of attention. The impact of familiarity on safety warnings with respect to age and education has also received very little attention; despite the knowledge that familiarity has been shown to increase the noticing of warnings and the comprehension of safety information. Despite the increase in the research on safety communication, the literature and research in South Africa is scarce. Studies present in South Africa do not encompass the comprehension of safety signs or the ability of individuals with different age and education levels to learn the information included in the signs. Due to the multi-linguistic nature of South Africa and the fact that South Africa is an Industrially Developing Country (IDC) with high levels of illiteracy, issues such as the comprehension of safety information must be addressed. Therefore, the objectives of this study were to investigate the effects of safety sign attributes on learning and familiarity, in subjects that differed in age and education levels. These effects were investigated through measuring the reaction and response times of the different subject groups, as well as the number of components in the safety signs that were recalled correctly. The combined results of these responses were used as a measure for familiarity. A set of signs was designed for the study by the researcher using three different colours, three different shapes, three different icons and text. Certain variables were omitted from some signs to create the test pool and the eight conditions that were tested in a laboratory setting. Each condition contained different components of the designed signs and 60 subjects were used to test these conditions. The subjects were placed in groups according to their age and level of education. Subjects were required to learn a set of 64 signs, either “With Occlusion” or “Without Occlusion”, and asked to recall the meanings of the components in the signs. Reaction time, response time and error rate were measured from the responses. The results showed that the conditions resulted in different reaction times, response times and error rates for all subjects. The signs containing a combination of shapes and text resulted in the best performance. Age and education were found to have a significant effect on various performance criteria as did the method in which the signs were displayed (Occlusion and No Occlusion). The increased repetitions and sessions elicited lower reaction times, response times and error rates. The conclusions drawn from this study suggest that different attributes be considered carefully when subjects are expected to learn and recall information in safety signs. The results also highlighted the need to increase the exposure of individuals to safety signs in order to increase familiarity and ultimately improve the recall and comprehension of the attributes.
- Full Text:
- Date Issued: 2011
The factors affecting self-regulation through the analysis of physiological, psychological and behavioural measures during task-switching
- Authors: Chaplin, Caley
- Date: 2013 , 2013-07-16
- Subjects: Human multitasking -- Physiological aspects , Human multitasking -- Psychological aspects , Fatigue , Boredom , Attention , Mental fatigue , Human information processing , Decision making , Labor productivity , Industrial hygiene , Employees -- Workload
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5135 , http://hdl.handle.net/10962/d1006027 , Human multitasking -- Physiological aspects , Human multitasking -- Psychological aspects , Fatigue , Boredom , Attention , Mental fatigue , Human information processing , Decision making , Labor productivity , Industrial hygiene , Employees -- Workload
- Description: Individuals are required to manage multiple tasks which require strategic allocation of time and effort to ensure goals are reached efficiently. By providing the worker with autonomy over their work, performance and worker well-being have improved. This increased control allows individuals to organize work according to the needs of the body, which prevents fatigue leading to improved productivity. When given the option, humans tend to switch between tasks frequently. This behaviour can be used to determine the change in self-regulation strategies. An understanding of human task-switching behaviour is important for the design of job rotation systems. However, there is a lack of evidence explaining the factors motivating the need to switch between tasks. This study aims to use physiological, subjective and behavioural measures to explain the factors influencing selfregulation through the act of task-switching. Three primary hypotheses were developed to explain the factors underlying taskswitching behaviour. It was hypothesized that the degree of boredom experienced, the effort required to perform the task and the resource usage induced by the task are factors responsible in deciding task switching behaviour. Participants (17 males and 17 females) switched freely between five different information-processing tasks for the 45 minutes. Participants were allowed to switch back and forth between tasks and did not have to conduct all five tasks. The following measures were recorded during the experiment: subjective measures of boredom, mental effort, task frustration and perceived performance of the tasks; energy consumption and physiological measures of effort (HR, HRV and body temperature) and behavioural measures, including duration and frequency of task. Perceived boredom was found to differ among the tasks and before and after the experiment. The average boredom rating at each task transition for all tasks exceeded a score of 2.5 out of a possible 4. There were no significant changes in physiological measures between the beginning and end of the task trials. However, changes in physiological measures showed a decrease in effort investment following task transition. Heart rate variability was lower for externally-paced tasks than for self-paced tasks, despite the differences in cognitive demands. The most frequent task-switch combination occurred between tasks of high and low cognitive demand. The least frequent task-switching combination occurred between tasks of similar characteristics, which produced no differences in physiological responses. Task-switching behaviour was influenced by the degree of boredom, and therefore more time was spent on less monotonous tasks. The level of physiological effort required for the task affected task-switching behaviour. Task switches were made before any changes in effort took place in an attempt to maintain task efficiency. It appears plausible that a task switch was made to reduce effort investment and activation levels. The type of information processing resources used by different tasks affected the task-switching combinations. Individuals tended to switch between tasks of differing resources so that those in limited supply were able to replenish. Therefore the findings from this study can potentially be used to improve the design of job rotation systems. Such improvements may enhance productivity and worker well-being by inhibiting the onset of down regulation and fatigue processes. This study showed that autonomy is necessary for individuals to regulate behaviour to suit human needs. , Microsoft� Office Word 2007 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013