Ethanol production from lignocellulosic sugarcane leaves and tops
- Authors: Dodo, Charlie Marembu
- Date: 2014
- Subjects: Biomass energy , Ethanol as fuel , Lignocellulose
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11347 , http://hdl.handle.net/10353/d1019839 , Biomass energy , Ethanol as fuel , Lignocellulose
- Description: Various methods for the production of bioethanol using different feedstocks have been researched on. In most work on bioethanol synthesis from sugar cane, tops and leaves have been regarded as waste and generally removed and thrown away. In this work, lignocellulosic sugarcane leaves and tops were not discarded but instead used as biomass to evaluate their hydrolyzate content. The leaves and tops were hydrolysed using different methods, namely concentrated acid, dilute acid pre-treatment with subsequent enzyme hydrolysis and compared with a combination of oxidative alkali pretreatment and enzyme hydrolysis. Subsequent fermentation of the hydrolyzates into bioethanol was done using the yeast saccharomyces cerevisae. Acid hydrolysis has the problem of producing inhibitors, which have to be removed and this was done using overliming with calcium hydroxide and compared to sodium hydroxide neutralization. Oxidative alkali pre-treatment with enzyme hydrolysis gave the highest yields of fermentable sugars of 38% (g/g) using 7% (v/v) peroxide pre-treated biomass than 36% (g/g) for 5% (v/v) with the least inhibitors. Concentrated and dilute acid hydrolysis each gave yields of25% (g/g) and 22% (g/g) yields respectively although for acid a neutralization step was necessary and resulted in dilution. Alkaline neutralization of acid hydrolyzates using sodium hydroxide resulted in less dilution and loss of fermentable sugars as compared to overliming. Higher yields of bioethanol, 13.7 (g/l) were obtained from enzyme hydrolyzates than 6.9 (g/l) bioethanol from dilute acid hydrolyzates. There was more bioethanol yield 13.7 (g/l) after 72h of fermentation with the yeast than 7.0 (g/l) bioethanol after 24h. However, the longer fermentation period diminishes the value of the increase in yield by lowering the efficiency of the process.
- Full Text:
- Date Issued: 2014
Development of a bench scale single batch biomass to liquid fuel facility
- Authors: Zhang, Yusheng
- Date: 2014
- Subjects: Biomass energy , Renewable energy sources , Energy conversion , Electric power production
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: http://hdl.handle.net/10353/811 , vital:26499 , Biomass energy , Renewable energy sources , Energy conversion , Electric power production
- Description: The research described in this dissertation was motivated by the global demand for energy that is not dependent on coal, oil, natural gas and other non-renewable fossil fuels. The technology used in this project is related to the use of biomass to produce a viable alternative to conventional sources of fuel. A bench scale biomass to liquid (BTL) facility was built and tested. This produced results confirming the feasibility of the BTL process. The findings of the pilot study outlined in this dissertation justified the conclusion that the next step will be to expand the capacity and productivity of the BTL pilot plant to an industrial scale. Biomass comes from a variety of renewable sources that are readily available. In this case, the material used in the fixed bed biomass gasification facility to generate wood gas was agricultural and forestry waste, such as straw and wood chips. The gasifier had the capacity to produce up to 10 cubic metres/hr of gas with a carbon monoxide and hydrogen content of between 20–40% by volume, when it was operated at ambient pressure and with air as the oxidizer. The gas, produced at a temperature above 700º C, was cooled in a quench/water scrubber in order to remove most of the mechanical impurities (tars and water-soluble inorganic particles), condensed and dried with corn cobs before being compressed in cylinders at over 100 bar (g) for use in the Fischer-Tropsch Synthesis (FTS). The syngas was subjected further to a series of refining processes which included removal of sulphur and oxygen. The sulphur removal technology chosen entailed applying modified activated carbon to adsorb H2S with the help of hydrolysis in order to convert organic sulphur impurities into H2S which reduced the sulphur content of the gas to less than 5 ppbv. Supported cobalt catalyst (100 grams), were loaded into a single-tube fixed bed FT reactor with an inner diameter of 50 mm. The reactor was fitted with a heating jacket through which, heated oil ran to cool the reactor during a normal reaction occurring at < 250 ºC, while nitrogen was used in the heating jacket during reduction, which occurred at temperatures up ~ 350 ºC. The FTS reaction was carried out at different pressures and temperatures. Liquid and wax products were produced from the facility. The properties of the liquid and solid hydrocarbons produced were found to be the same as FT products from other feed stocks, such as natural gas and coal.
- Full Text:
- Date Issued: 2014