4-Azidoaniline-based electropolymer as a building block for functionalisation of conductive surfaces
- Authors: Coates, Megan , Elamari, Hichem , Girard, Christian , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244404 , vital:51254 , xlink:href="https://doi.org/10.1016/j.jelechem.2012.01.001"
- Description: We propose in this work to compare three approaches using 4-azidoaniline combined with “click” chemistry and electrochemistry to anchor ferrocene moieties at glassy carbon surfaces. The immobilisation of a newly synthesised molecule, 4-(4-ferrocenyl-1H-1,2,3-triazol-1-yl)aniline, through direct electropolymerisation or via in situ diazotization followed by electrografting is studied by analysing the samples by XPS and electrochemistry.
- Full Text:
- Date Issued: 2012
A comparative study on the sensitive detection of hydroxyl radical using thiol-capped CdTe and CdTe/ZnS quantum dots
- Authors: Adegoke, Oluwasesan , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242778 , vital:51077 , xlink:href="https://doi.org/10.1007/s10895-012-1089-2"
- Description: Four types of water-soluble luminescent quantum dots (QDs) whose surface was functionlaized with thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), or glutathione (GSH), were investigated for the sensitive and selective detection of hydroxyl radical (●OH) in aqueous media. It was found that the type of capping agent and QD influenced the sensitivity of the probe. The order of sensitivity of the probe was: GSH-CdTe@ZnS > MPA-CdTe@ZnS > TGA-CdTe > MPA-CdTe QDs. Under the optimum conditions, a limit of detection as low as 8.5 × 10-8 M was obtained using GSH-CdTe@ZnS. The effects of foreign reactive oxygen species and the Fenton reactants and products as possible interferences on the proposed probe were negligible for CdTe@ZnS QDs. Besides, experimental results indicated that CdTe@ZnS QDs were more attractive for the selective recognition of ●OH than CdTe QDs. The mechanistic reaction pathway between the QDs and ●OH is proposed.
- Full Text:
- Date Issued: 2012
A highly selective and sensitive pyridylazo-2-naphthol-poly (acrylic acid) functionalized electrospun nanofiber fluorescence “turn-off” chemosensory system for Ni 2+
- Authors: Adewuyi, Sheriff , Ondigo, Dezzline A , Zugle, Ruphino , Tshentu, Zenixole , Nyokong, Tebello , Torto, Nelson
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246012 , vital:51428 , xlink:href="https://doi.org/10.1039/C2AY25182E"
- Description: A fluorescent nanofiber probe for the determination of Ni2+ was developed via the electrospinning of a covalently functionalized pyridylazo-2-naphthol-poly(acrylic acid) polymer. Fluorescent nanofibers with diameters in the range 230–800 nm were produced with uniformly dispersed fluorophores. The excitation and emission fluorescence were at wavelengths 479 and 557 nm respectively, thereby exhibiting a good Stokes' shift. This Ni2+ probe that employs fluorescence quenching in a solid receptor–fluorophore system exhibited a good correlation between the fluorescence intensity and nickel concentration up to 1.0 μg mL−1 based on the Stern–Volmer mechanism. The probe achieved a detection limit (3δ/S) of 0.07 ng mL−1 and a precision, calculated as a relative standard deviation (RSD) of more than 4% (n = 8). The concentration of Ni2+ in a certified reference material (SEP-3) was found to be 0.8986 μg mL−1, which is significantly comparable with the certified value of 0.8980 μg mL−1. The accuracy of the determinations, expressed as a relative error between the certified and the observed values of certified reference groundwater was ≤0.1%. The versatility of the nanofiber probe was demonstrated by affording simple, rapid and selective detection of Ni2+ in the presence of other competing metal ions by direct analysis, without employing any further sample handling steps.
- Full Text:
- Date Issued: 2012
A lover’s shame
- Authors: Jones, Ward E
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/275692 , vital:55071 , xlink:href="https://doi.org/10.1007/s10677-012-9356-5"
- Description: Shame is one of the more painful consequences of loving someone; my beloved’s doing something immoral can cause me to be ashamed of her. The guiding thought behind this paper is that explaining this phenomenon can tell us something about what it means to love. The phenomenon of beloved-induced shame has been largely neglected by philosophers working on shame, most of whom conceive of shame as being a reflexive attitude. Bennett Helm has recently suggested that in order to account for beloved-induced shame, we should deny the reflexivity of shame. After arguing that Helm’s account is inadequate, I proceed to develop an account of beloved-induced shame that rightly preserves its reflexivity. A familiar feature of love is that it involves an evaluative dependence; when I love someone, my well-being depends upon her life’s going well. I argue that loving someone also involves a persistent tendency to believe that her life is going well, in the sense that she is a good person, that she is not prone to wickedness. Lovers are inclined, more strongly than they otherwise would be, to give their beloveds the moral benefit of the doubt. These two features of loving—an evaluative dependence and a persistent tendency to believe in the beloved’s moral goodness—provide the conditions for a lover to experience shame when he discovers that his beloved has morally transgressed.
- Full Text:
- Date Issued: 2012
A production function for cricket: the South African perspective
- Authors: Brock, Kelsey , Fraser, Gavin , Botha, Ferdi
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/396007 , vital:69143 , xlink:href="https://hdl.handle.net/10520/EJC124240"
- Description: Production functions are common to any productive activity. Although it may not appear obvious, cricket is no different. Production functions in cricket provide a wide range of information, utilised to enhance efficiency and maximize match success. Given these benefits, this study involved the derivation of a production function for the South African SuperSport Series and an analysis of technical efficiency. An econometric analysis was conducted on data from the 2004-2011 cricket seasons and it was concluded that the most optimal strategy for South African teams involved a combination of attacking batting and defensive bowling. Furthermore, South African teams had a relatively low variable substitutability and a high degree of technical efficiency.
- Full Text:
- Date Issued: 2012
A study on the morphology of thin copper films on para-aramid yarns and their influence on the yarn’s electro-conductive and mechanical properties
- Authors: Schwarz, Anne , Hakuzimana, Jean , Westbroek, Philippe , Mey, Gilbert De , Priniotakis, Georgios , Nyokong, Tebello , Langenhove, Lieva Van
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/243487 , vital:51157 , xlink:href="https://doi.org/10.1177/0040517511431291"
- Description: The latest technological advances in new materials and devices enabled wearable systems to be created by utilizing textile solutions. These solutions require electro-conductive yarns as a basic component. Although the production of electroconductive yarn is widely reported, research is still necessary to characterize them to advance their electro-conductive and mechanical properties. Hence, we served this need and characterized copper-coated para-aramid yarns produced by an in-house developed electroless deposition method. In this paper we present our investigation on the yarn’s copper layer characteristics after deposition. Furthermore, we looked, in depth, at the yarn’s electro-conductive properties before and after washing as well as their mechanical properties before and after copper deposition. We found a dependency of the copper layer morphology on its deposition time. This is directly correlated to the resulting layer thickness and hence to the yarn’s electro-conductive properties, demonstrating the autocatalytic nature of the coating process. Above that, the electro-conductive properties of the coated yarn linearly decrease with washing cycles. Furthermore, the copper coating impairs the yarn’s mechanical properties decreasing its specific stress at break by 30%.
- Full Text:
- Date Issued: 2012
CdTe quantum dots functionalized with 4-amino-2, 2, 6, 6-tetramethylpiperidine-N-oxide as luminescent nanoprobe for the sensitive recognition of bromide ion
- Authors: Adegoke, Oluwasesan , Hosten, Eric , McCleland, Cedric , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244393 , vital:51253 , xlink:href="https://doi.org/10.1016/j.aca.2012.01.040"
- Description: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.
- Full Text:
- Date Issued: 2012
Characterization of 2,(3)-tetra-(4-oxo-benzamide) phthalocyaninato cobalt (II)—single walled carbon nanotube conjugate platforms and their use in electrocatalysis of amitrole
- Authors: Mugadza, Tawanda , Arslanoğlu, Yasin , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244382 , vital:51252 , xlink:href="https://doi.org/10.1016/j.electacta.2012.02.041"
- Description: In this paper we report on the use of carboxylic acid functionalized single walled carbon nanotubes (SWCNT) in the synthesis of 2,(3)-tetra-(4-oxo-benzamide)phthalocyaninato cobalt (II)–single walled carbon nanotube conjugates (CoTOBPc–SWCNT), their characterization and application in the electrocatalytic oxidation of amitrole. Cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy were used for the detection of amitrole on the modified glassy carbon electrode. The catalytic rate constant was 1.6 × 103 M−1 s−1 and the apparent electron rate transfer constant was 1.5 × 10−5 cm s−1. The linear dynamic range was 1.0 × 10−6–3.0 × 10−5 M, with a sensitivity of ∼1.13 A mol−1 L cm−2.
- Full Text:
- Date Issued: 2012
Comparison of carbon screen-printed and disk electrodes in the detection of antioxidants using CoPc derivatives
- Authors: Matemadombo, Fungisai , Apetrei, Constantin , Nyokong, Tebello , Rodríguez-Méndez, María Luz , de Saja, José Antonio
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/244371 , vital:51251 , xlink:href="https://doi.org/10.1016/j.snb.2012.02.088"
- Description: Cobalt phthalocyanine (CoPc) and cobalt phthalocyanine carboxylic derivatives (CoTCPc and CoOCPc) have been used as electrocatalysts for the detection of the antioxidants vanillic acid, caffeic acid, pyrogallol, and ascorbic acid on screen-printed carbon and disk electrode surfaces. The cobalt phthalocyanines were used to detect vanillic acid (with limit of detection ranging from 1.15 μM to 2.42 μM at potentials of 0.55–0.88 V vs. Ag|AgCl), caffeic acid (with limit of detection ranging from 1.17 μM to 2.20 μM at potentials of 0.30–0.81 V vs. Ag|AgCl), pyrogallol (with limit of detection ranging from 1.16 μM to 3.63 μM at potentials of 0.52–0.63 V vs. Ag|AgCl), and ascorbic acid (with limit of detection ranging from 1.16 μM to 1.58 μM at potentials of 0.34–0.46 V vs. Ag|AgCl). The kinetic studies also demonstrate diffusion-controlled processes at the electrode surface. The SPCE electrodes have better detection properties towards vanillic acid, caffeic acid, pyrogallol while the disk electrodes had better ascorbic acid detection properties as proven by kinetic studies. Both types CoPc-influenced electrodes show 100% discrimination of the antioxidants.
- Full Text:
- Date Issued: 2012
Electrocatalytic behavior of cobalt phthalocyanine complexes immobilized on glassy carbon electrode towards the reduction of dicrotophos pesticide
- Authors: Vilakazi, Sibulelo , Nyokong, Tebello , Fukuda, Takamitsu , Kobayashi, Nagao
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/245832 , vital:51409 , xlink:href="https://doi.org/10.1142/S1088424612501040"
- Description: Electrocatalytic properties of cobalt phthalocyanine (CoPc), cobalt tetra-carboxy phthalocyanine (CoTCPc) and cobalt octa-carboxy (CoOCPc), towards the detection of dicrotophos have been studied. Catalytic behavior towards the reduction of dicrotophos was found to be dependent on the pH, as well as the substitution on the phthalocyanine ring. Strong electron withdrawing groups on the phthalocyanine ring yielded best catalysis as evidenced by the enhancement of the reduction peak current, (~5 fold) compared to the bare glassy carbon electrode. The analysis gave a good detection limit of 1.25 × 10-7 M, and good linearity for the studied concentration range. A high Tafel slope value was obtained, indicating a strong interaction between dicrotophos and the cobalt phthalocyanine complex.
- Full Text:
- Date Issued: 2012
Electrospun polyacrylic acid polymer fibers functionalized with metallophthalocyanines for photosensitizing and gas sensing applications
- Authors: Zugle, Ruphino , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/243543 , vital:51162 , xlink:href="https://doi.org/10.1080/10601325.2012.662006"
- Description: The photophysical and photochemical properties of tetraaminophthalocyanine complexes of lutetium and zinc covalently linked to polyacrylic acid were studied alongside those of unsubstituted zinc phthalocyanine within the same polymeric fiber matrix. All three phthalocyanines within the solid fiber matrices showed photoactivity by the generation of singlet oxygen as was observed in solution. The fluorescence behaviors of the composite fibers equally parallel those in solution. For the unsubstituted zinc phthalocyanine composite, the fiber showed fluorescence quenching on interaction with gaseous nitrogen dioxide similar to that in DMF and, thus could be a promising nanofabric material in developing optoelectronic devices that are responsive to the gas.
- Full Text:
- Date Issued: 2012
Facile deposition of gold nanoparticle thin films on semi-permeable cellulose substrate
- Authors: Sosibo, Ndabenhle , Mdluli, Phumlani , Mashazi, Philani N , Tshikhudo, Robert , Skepu, Amanda , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242638 , vital:51063 , xlink:href="https://doi.org/10.1016/j.matlet.2012.08.043"
- Description: This study reports the facile method for the deposition of gold nanoparticle thin film onto a monoporous semi-permeable cellulose membrane through the diffusion of borohydride ions leading to the reduction of AuCl4− ions. The synthesis of gold nanoparticle thin film was deposited on one side of the membrane that was exposed to AuCl4− ions while the other side containing a reducing agent remained clear. The gold nanoparticle thin film exhibited a broad surface plasmon resonance (SPR) peak at 529 nm. Various characterization techniques were employed and all demonstrated the presence of gold thin film. The reported method represents a simplistic method for the deposition of gold nanoparticle thin films and various other metal nanoparticles may be deposited following this method.
- Full Text:
- Date Issued: 2012
Firm age, collateral value, and access to debt financing in an emerging economy: evidence from South Africa
- Authors: Ezeoha,Abel , Botha, Ferdi
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/396060 , vital:69147 , xlink:href="https://hdl.handle.net/10520/EJC31367"
- Description: This paper applies the Blundell and Bond system generalised method of moments (GMM) two-step estimator to examine the impact of age and collateral value on debt financing, using a panel of 177 non-financial companies listed on the Johannesburg Stock Exchange over the period 1999 to 2009. The results show that South African firms have target leverage ratios and adjust their capital structures from time to time to achieve their respective targets, that the relationship between firm age and debt financing is non-monotonic, and that firms with higher collateral value are likely to face fewer constraints on borrowing and therefore have greater access to medium-term and long-term debts. Robustness tests also reveal that during start-up and maturity stages, a firm's access to debt markets is significantly influenced by investments in assets that are acceptable to external creditors as collateral. These findings suggest that debt financing policies could be more critical for firms in the start-up and maturity stages.
- Full Text:
- Date Issued: 2012
Higher education, academic communities, and the intellectual virtues
- Authors: Jones, Ward E
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/275647 , vital:55066 , xlink:href="https://doi.org/10.1111/edth.12005"
- Description: Because higher education brings members of academic communities in direct contact with students, the reflective higher education student is in an excellent position for developing two important intellectual virtues: confidence and humility. However, academic communities differ as to whether their members reach consensus, and their teaching practices reflect this difference. In this essay, Ward Jones argues that both consensus-reaching and non-consensus-reaching communities can encourage the development of intellectual confidence and humility in their students, although each will do so in very different ways.
- Full Text:
- Date Issued: 2012
How do HIV and AIDS impact the use of natural resources by poor rural populations?: The case of wild animal products
- Authors: Kaschula, Sarah , Shackleton, Charlie M
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/182344 , vital:43822 , xlink:href="https://hdl.handle.net/10520/EJC97203"
- Description: As a result of heightened financial and food insecurity, populations adversely affected by HIV and/or AIDS may be more likely to utilise wild natural resources to supplement their diet and livelihoods. Should this effect be pronounced, HIV and AIDS may pose a serious environmental threat. We explored the hypothesis that the presence of factors in the household, such as chronic illness in and recent mortality of individuals in a high HIV-risk age group, as well as the fostering of orphans, are associated with increased utilisation of wild animal products (WAPs) at the household level. We randomly surveyed 519 households from four sites in rural South Africa, recording household socio-economic status, the utilisation of wild animal products and health and demographic factors attributed to HIV or AIDS. Binary logistic regressions were used to test if households with markers of HIV and/or AIDS affliction were more likely to have a higher incidence and frequency of WAP utilisation relative to non-afflicted households, after adjusting for socio-economic and demographic variables. We found that, although households with markers of HIV and/or AIDS were generally poorer and had higher dependency ratios, there was no evidence to support the hypothesis that WAP harvesting was associated with either poverty, or markers of HIV and/or AIDS affliction. Our findings suggest that generalisations about a possible interaction between HIV and/or AIDS and the environment may not uniformly apply to all categories of natural resources or to all user groups.
- Full Text:
- Date Issued: 2012
Imidazole-functionalized polymer microspheres and fibers–useful materials for immobilization of oxovanadium (IV) catalysts
- Authors: Walmsley, Ryan S , Ogunlaja, Adeniyi S , Coombes, Matthew J , Chidawanyika, Wadzanai J U , Litwinski, Christian , Torto, Nelson , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246041 , vital:51431 , xlink:href="https://doi.org/10.1039/C2JM15485D"
- Description: Both polymer microspheres and microfibers containing the imidazole functionality have been prepared and used to immobilize oxovanadium(IV). The average diameters and BET surface areas of the microspheres were 322 μm and 155 m2 g−1 while the fibers were 1.85 μm and 52 m2 g−1, respectively. XPS and microanalysis confirmed the incorporation of imidazole and vanadium in the polymeric materials. The catalytic activity of both materials was evaluated using the hydrogen peroxide facilitated oxidation of thioanisole. The microspheres were applied in a typical laboratory batch reactor set-up and quantitative conversions (>99%) were obtained in under 240 min with turn-over frequencies ranging from 21.89 to 265.53 h−1, depending on the quantity of catalyst and temperature. The microspherical catalysts also proved to be recyclable with no drop in activity being observed after three successive reactions. The vanadium functionalized fibers were applied in a pseudo continuous flow set-up. Factors influencing the overall conversion and product selectivity, including flow rate and catalyst quantity, were investigated. At flow rates of 1–4 mL h−1 near quantitative conversion was maintained over an extended period. Keeping the mass of catalyst constant (0.025 g) and varying the flow rate from 1–6 mL h−1 resulted in a shift in the formation of the oxidation product methyl phenyl sulfone from 60.1 to 18.6%.
- Full Text:
- Date Issued: 2012
In vitro photodynamic effect of aluminum tetrasulfophthalocyanines on melanoma skin cancer and healthy normal skin cells
- Authors: Maduray, Kaminee , Odhay, Bharti , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/245762 , vital:51403 , xlink:href="https://doi.org/10.1016/j.pdpdt.2011.07.001"
- Description: Photodynamic therapy is a medical treatment that uses an inactive dye/drug and lasers as a light source to activate the dye/drug to produce a toxic form of oxygen that destroys the cancer cells. This study aimed at investigating the cytotoxic effects of different concentrations of aluminum tetrasulfophthalocyanines in its inactive and active state (laser induced) on melanoma skin cancer cells, healthy normal skin fibroblast and keratinocyte cells. Experimentally, 3 x 10(4) cells/ml were seeded in 24-well plates before treatment with different concentrations of aluminum tetrasulfophthalocyanines. After 2 h, cells were irradiated with a light dose of 4.5 J/cm(2). Post-irradiated cells were incubated for 24 h before cell viability was measured using the CellTiter-Blue Viability Assay. Results showed that aluminum tetrasulfophthalocyanines at high concentrations were cytotoxic to melanoma cells in the absence of laser activation. In the presence of laser activation of aluminum tetrasulfophthalocyanines at a concentration of 40 mu g/ml decreased cell viability of melanoma cells to 45%, fibroblasts to 78% and keratinocytes to 73%. At this photosensitizing concentration of aluminum tetrasulfophthalocyanines the efficacy of the treatment light dose 4.5 J/cm(2) and the cell death mechanism induced by photoactivated aluminum tetrasulfophthalocyanines was evaluated. A light dose of 4.5 J/cm(2) was more efficient in killing a higher number of melanoma cells and a lower number of fibroblast and keratinocyte cells than the other light doses of 2.5 J/cm(2), 7.5 J/cm(2) and 10.5 J/cm(2). Apoptosis features such as blebbing, nucleus condensation, nucleus fragmentation and the formation of apoptotic bodies were seen in the photodynamic therapy treated melanoma skin cancer cells. This in vitro photodynamic therapy study concludes that using aluminum tetrasulfophthalocyanines at a photosensitizing concentration of 40 mu g/ml in combination with a laser dose of 4.5 J/cm(2) was potentially lethal for melanoma skin cancer cells and less harmful for the normal healthy skin cells. (c) 2011 Elsevier B.V. All rights reserved.
- Full Text:
- Date Issued: 2012
Interaction of CdTe quantum dots with 2, 2-diphenyl-1-picrylhydrazyl free radical
- Authors: Adegoke, Oluwasesan , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/245751 , vital:51402 , xlink:href="https://doi.org/10.1007/s10895-011-1012-2"
- Description: The interaction of 2,2-diphenyl-1-picrylhydrazyl (DPPH●) free radical with thiol-capped CdTe quantum dots (QDs) has been studied by UV–vis spectroscopy, steady state and time resolved fluorescence measurements. Addition of DPPH● radical to CdTe QDs resulted in fluorescence quenching. The interaction occurs through static quenching as this was confirmed by fluorescence lifetime measurements. Time course absorption studies indicates that DPPH● may be reduced by interaction with QDs to the substituted hydrazine form (2,2-diphenyl-1-picrylhydrazine) DPPH-H. The mechanism of fluorescence quenching of CdTe QDs by DPPH● is proposed.
- Full Text:
- Date Issued: 2012
Is there no urban forestry in the developing world?
- Authors: Shackleton, Charlie M
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/181060 , vital:43695 , xlink:href="https://doi.org/10.5897/SRE11.1117"
- Description: Urban forestry and greening offer a multitude of benefits to the inhabitants of towns and cities. However, the nature and magnitude of these frequently depend upon the context. Yet, at first glance, the developing world context around urban forestry debates seems to be poorly represented in the international peer-reviewed literature. This is examined in this paper, followed by a brief outline of ten key research areas for urban forestry in the developing world. A survey of the peer-reviewed literature confirms that almost 80% of articles come from the developed world context. This correlates with the greater availability of research finance and personnel from developed regions. However, there are urban forestry questions and issues that require examination in the developing world because they cannot simply be transferred from knowledge gleaned from and tested in a developed world context. Ten of these are briefly outlined as a catalyst towards greater attention to urban forestry in the developing world and their contributions to global debates and models.
- Full Text:
- Date Issued: 2012
Layer by Layer Electrode Surface Functionalisation Using Carbon Nanotubes, Electrochemical Grafting of Azide‐Alkyne Functions and Click Chemistry
- Authors: Coates, Megan , Griveau, Sophie , Bedioui, Fethi , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/243509 , vital:51159 , xlink:href="https://doi.org/10.1002/elan.201200240"
- Description: Ferrocene was covalently bonded to a layer of adsorbed single-walled carbon nanotubes on a glassy carbon electrode surface using electrochemical grafting and click chemistry. Grafting of the 4-azidobenzenediazonium salt onto the surface was accomplished by electrochemical reduction. The surface-bound azide groups, with the use of a copper(I) catalyst, were reacted with ethynylferrocene to form covalent 1,2,3-triazole bonds by click chemistry. This layer by layer construction of the electrode surface results in stable electrodes by combining good electrical conductivity and increased surface area of the nanotubes with the versatility of the Sharpless click reaction.
- Full Text:
- Date Issued: 2012