The androgenic and anabolic effects of pine pollen on Nile tilapia (Oreochromis niloticus)
- Authors: Abaho, Ivan
- Date: 2023-10-13
- Subjects: Tilapia , Aquaculture , Pine pollen , Gene expression , Methyltestosterone , Sex steroid
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/431615 , vital:72790 , DOI 10.21504/10962/431615
- Description: All-male tilapia aquaculture is desirable to control unwanted breeding. Besides, male tilapia individuals grow faster and bigger than females. Presently, most farmers use 17α- methyltestosterone (MT) to produce an all-male stock, although the hormone is associated with human health and environmental risks. Recently, plant-based products have been reported to induce masculinisation in fish and are considered safe nature-based alternatives to MT. The present study utilised pine pollen (PP) to induce female-to-male sex change in Nile tilapia (Oreochromis niloticus). Prior to the start of the research, there was insufficient information on the use of PP for sex inversion, with no published data on the sex change mechanism, hence limiting the progress in the application of the product from experimental to hatchery levels. In this study, the optimal dietary inclusion of PP for maximum masculinisation of Nile tilapia was investigated by feeding three-day-old fish graded PP levels (80, 160, 320, 640, 1,280, 1,920, 2,560 and 3,200 mg kg-1 basal diet) from 3 to 30 days post-hatch (dph). This was compared with fish of the same batch fed the same basal diet with no PP (CT; negative control) or the same basal diet supplemented with 60 mg MT kg-1 (MT; positive control). To confirm whether the sex change was complete, fish in all treatments were fed only a basal diet for an additional 84 days. The associated differences in the growth of the fish were also determined. Pine pollen and MT significantly skewed the expected 50:50 (male: female) ratio towards more male individuals (Chi-square: X2 = 54.396, df = 9, P < 0.001). The 1,280 mg PP kg-1 of diet equally induced masculinisation (80.0 ± 2.9 % males) as MT (89.2 ± 2.2 %), and both were significantly higher than 50.8 ± 2.2 % in the CT treatment. In addition to masculinization, dietary inclusion of 1,280 mg PP kg-1 improved fish growth, with the specific growth rate significantly higher than fish from the MT and CT treatments (One-way ANOVA: F(9, 20) =14.196, P < 0.001). An increment in the dietary levels of PP from 1,280 to 3,200 mg kg-1 further promoted the growth of the fish but did not affect masculinisation. The mechanism underlying PP-induced sex masculinisation was investigated using all-female Nile tilapia fed a basal diet supplemented with 1,280 mg PP kg-1 for 28 days from 3 dph, in comparison with fish fed a basal diet incorporated with 60 mg MT kg-1 (MT treatment) or only a basal diet (CT treatment). The expression of sex-related genes (dmrt1, amh, cyp19a1a, and foxl2), changes in sex steroid profiles (T: testosterone, 11-KT: 11-ketotestosterone, and E2: 17β-estradiol), and gonadal histology were analysed. Gene expression and sex steroid concentrations were significantly influenced by the interaction between dietary treatment and time, with the expression changing differently over time among the treatments (RM-ANOVA: P < 0.001). Pine pollen significantly up-regulated the expression of dmrt1 and amh, while cyp19a1a and foxl2 were down-regulated. Corresponding to male sex gene up-regulation, male-based steroids (11-KT and T) levels were also significantly amplified in both PP and MTtreated fish. The gene expression pattern and changes in sex steroids corresponded to a higher proportion of male individuals obtained in the MT and PP treatments (MT: 97.8 ± 1.1 % and PP: 77.8 ± 2.9 % males), implying female-to-male sex change induction. Subsequently, spermatogonia and spermatocytes were the dominant germ cells in the histological sections of the gonads obtained from the PP-treated fish. At the same time, the individuals from the MT treatment exhibited mainly spermatids and spermatozoa. In contrast, all the fish from the CT treatment remained females, having only ovarian tissues. This thesis confirmed that PP induces female-to-male sex change in Nile tilapia and enhances fish growth. The research contributed novel information on the mechanism underlying PP induced sex change, which included disrupting the expression of sex genes and the androgento- estrogen balance, ultimately determining the sexual fate of the fish. The findings provide a foundation for understanding the role of PP in masculinisation, with broad potential application in the aquaculture industry. , Thesis (PhD) -- Faculty of Science, Ichthyology and Fisheries Science, 2023
- Full Text:
- Date Issued: 2023-10-13
- Authors: Abaho, Ivan
- Date: 2023-10-13
- Subjects: Tilapia , Aquaculture , Pine pollen , Gene expression , Methyltestosterone , Sex steroid
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/431615 , vital:72790 , DOI 10.21504/10962/431615
- Description: All-male tilapia aquaculture is desirable to control unwanted breeding. Besides, male tilapia individuals grow faster and bigger than females. Presently, most farmers use 17α- methyltestosterone (MT) to produce an all-male stock, although the hormone is associated with human health and environmental risks. Recently, plant-based products have been reported to induce masculinisation in fish and are considered safe nature-based alternatives to MT. The present study utilised pine pollen (PP) to induce female-to-male sex change in Nile tilapia (Oreochromis niloticus). Prior to the start of the research, there was insufficient information on the use of PP for sex inversion, with no published data on the sex change mechanism, hence limiting the progress in the application of the product from experimental to hatchery levels. In this study, the optimal dietary inclusion of PP for maximum masculinisation of Nile tilapia was investigated by feeding three-day-old fish graded PP levels (80, 160, 320, 640, 1,280, 1,920, 2,560 and 3,200 mg kg-1 basal diet) from 3 to 30 days post-hatch (dph). This was compared with fish of the same batch fed the same basal diet with no PP (CT; negative control) or the same basal diet supplemented with 60 mg MT kg-1 (MT; positive control). To confirm whether the sex change was complete, fish in all treatments were fed only a basal diet for an additional 84 days. The associated differences in the growth of the fish were also determined. Pine pollen and MT significantly skewed the expected 50:50 (male: female) ratio towards more male individuals (Chi-square: X2 = 54.396, df = 9, P < 0.001). The 1,280 mg PP kg-1 of diet equally induced masculinisation (80.0 ± 2.9 % males) as MT (89.2 ± 2.2 %), and both were significantly higher than 50.8 ± 2.2 % in the CT treatment. In addition to masculinization, dietary inclusion of 1,280 mg PP kg-1 improved fish growth, with the specific growth rate significantly higher than fish from the MT and CT treatments (One-way ANOVA: F(9, 20) =14.196, P < 0.001). An increment in the dietary levels of PP from 1,280 to 3,200 mg kg-1 further promoted the growth of the fish but did not affect masculinisation. The mechanism underlying PP-induced sex masculinisation was investigated using all-female Nile tilapia fed a basal diet supplemented with 1,280 mg PP kg-1 for 28 days from 3 dph, in comparison with fish fed a basal diet incorporated with 60 mg MT kg-1 (MT treatment) or only a basal diet (CT treatment). The expression of sex-related genes (dmrt1, amh, cyp19a1a, and foxl2), changes in sex steroid profiles (T: testosterone, 11-KT: 11-ketotestosterone, and E2: 17β-estradiol), and gonadal histology were analysed. Gene expression and sex steroid concentrations were significantly influenced by the interaction between dietary treatment and time, with the expression changing differently over time among the treatments (RM-ANOVA: P < 0.001). Pine pollen significantly up-regulated the expression of dmrt1 and amh, while cyp19a1a and foxl2 were down-regulated. Corresponding to male sex gene up-regulation, male-based steroids (11-KT and T) levels were also significantly amplified in both PP and MTtreated fish. The gene expression pattern and changes in sex steroids corresponded to a higher proportion of male individuals obtained in the MT and PP treatments (MT: 97.8 ± 1.1 % and PP: 77.8 ± 2.9 % males), implying female-to-male sex change induction. Subsequently, spermatogonia and spermatocytes were the dominant germ cells in the histological sections of the gonads obtained from the PP-treated fish. At the same time, the individuals from the MT treatment exhibited mainly spermatids and spermatozoa. In contrast, all the fish from the CT treatment remained females, having only ovarian tissues. This thesis confirmed that PP induces female-to-male sex change in Nile tilapia and enhances fish growth. The research contributed novel information on the mechanism underlying PP induced sex change, which included disrupting the expression of sex genes and the androgento- estrogen balance, ultimately determining the sexual fate of the fish. The findings provide a foundation for understanding the role of PP in masculinisation, with broad potential application in the aquaculture industry. , Thesis (PhD) -- Faculty of Science, Ichthyology and Fisheries Science, 2023
- Full Text:
- Date Issued: 2023-10-13
Genetic and biological characterisation of a novel Plutella xylostella granulovirus, PlxyGV-SA
- Abdulkadir, Fatima, Knox, Caroline M, Marsberg, Tamryn, Hill, Martin P, Moore, Sean D
- Authors: Abdulkadir, Fatima , Knox, Caroline M , Marsberg, Tamryn , Hill, Martin P , Moore, Sean D
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/417971 , vital:71498 , xlink:href="https://doi.org/10.1007/s10526-015-9666-3"
- Description: Plutella xylostella granulovirus (PlxyGV) has been isolated from insect populations in many countries and is considered a potential biopesticide for sustainable control of P. xylostella (L.) (Lepidoptera: Plutellidae). Several PlxyGV isolates have been genetically characterised, and the full genome sequence of PlxyGV-Japan is available for comparison with novel isolates. A South African PlxyGV was recently recovered from an overcrowded laboratory P. xylostella colony and identified as a genetically distinct isolate by sequencing of the granulin gene and restriction endonuclease (REN) analysis of genomic DNA. In this report, PlxyGV-SA was further characterised by PCR amplification and sequencing of egt, lef-8 and lef-9 genes, and several amino acid substitutions were observed. The PstI REN profile of PlxyGV-SA was different from that of PlxyGV-Japan in terms of band size and number, thereby confirming its novel genetic identity. Surface dose bioassays showed that PlxyGV-SA is pathogenic to neonate but not late instar larvae at the same and higher virus doses, indicating that a biopesticide should be targeted at early larval stages in the field.
- Full Text:
- Date Issued: 2015
- Authors: Abdulkadir, Fatima , Knox, Caroline M , Marsberg, Tamryn , Hill, Martin P , Moore, Sean D
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/417971 , vital:71498 , xlink:href="https://doi.org/10.1007/s10526-015-9666-3"
- Description: Plutella xylostella granulovirus (PlxyGV) has been isolated from insect populations in many countries and is considered a potential biopesticide for sustainable control of P. xylostella (L.) (Lepidoptera: Plutellidae). Several PlxyGV isolates have been genetically characterised, and the full genome sequence of PlxyGV-Japan is available for comparison with novel isolates. A South African PlxyGV was recently recovered from an overcrowded laboratory P. xylostella colony and identified as a genetically distinct isolate by sequencing of the granulin gene and restriction endonuclease (REN) analysis of genomic DNA. In this report, PlxyGV-SA was further characterised by PCR amplification and sequencing of egt, lef-8 and lef-9 genes, and several amino acid substitutions were observed. The PstI REN profile of PlxyGV-SA was different from that of PlxyGV-Japan in terms of band size and number, thereby confirming its novel genetic identity. Surface dose bioassays showed that PlxyGV-SA is pathogenic to neonate but not late instar larvae at the same and higher virus doses, indicating that a biopesticide should be targeted at early larval stages in the field.
- Full Text:
- Date Issued: 2015
Morphological and genetic characterization of a South African Plutella xylostella granulovirus (plxy GV) isolate
- Abdulkadir, Fatima, Marsberg, Tamryn, Knox, Caroline M, Hill, Martin P, Moore, Sean D
- Authors: Abdulkadir, Fatima , Marsberg, Tamryn , Knox, Caroline M , Hill, Martin P , Moore, Sean D
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/406117 , vital:70240 , xlink:href="https://hdl.handle.net/10520/EJC132828"
- Description: Plutella xylostella (L.) (Lepidoptera: Plutellidae), also known as diamondback moth, is a destructive insect pest of cruciferous crops (Talekar and Shelton 1993; Shelton 2004). The pest occurs wherever its host plants are cultivated and the global annual cost of damage and control is estimated to be US$4-5 billion (Zalucki et al. 2012). The extensive use of synthetic pesticides for control combined with the high fecundity of P. xylostella has resulted in the pest developing resistance to nearly all classes of insecticides (Grzywacz et al. 2009). Moreover, these chemicals have negative environmental implications and may affect non-target species, some of which are natural enemies of the pest.
- Full Text:
- Date Issued: 2013
- Authors: Abdulkadir, Fatima , Marsberg, Tamryn , Knox, Caroline M , Hill, Martin P , Moore, Sean D
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/406117 , vital:70240 , xlink:href="https://hdl.handle.net/10520/EJC132828"
- Description: Plutella xylostella (L.) (Lepidoptera: Plutellidae), also known as diamondback moth, is a destructive insect pest of cruciferous crops (Talekar and Shelton 1993; Shelton 2004). The pest occurs wherever its host plants are cultivated and the global annual cost of damage and control is estimated to be US$4-5 billion (Zalucki et al. 2012). The extensive use of synthetic pesticides for control combined with the high fecundity of P. xylostella has resulted in the pest developing resistance to nearly all classes of insecticides (Grzywacz et al. 2009). Moreover, these chemicals have negative environmental implications and may affect non-target species, some of which are natural enemies of the pest.
- Full Text:
- Date Issued: 2013
Optical surface quality and molecular dynamics modelling of ultra-high precision optical silicon machining
- Authors: Abdulkadir, Lukman Niyi
- Date: 2019-04
- Subjects: Engineering design -- Data processing , Manufacturing processes -- Data processing , Mechatronics
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/66552 , vital:75601
- Description: Hard and brittle materials, such as silicon, silicon carbide etc., are widely used in aerospace, integrated circuit, and other fields due to their excellent physical and chemical properties. However, these materials display poor machinability owing to hardness, brittleness, non-linearity in machining process and complexities in selecting suitable machining parameters and tool geometry. These leads to low quality lenses due to subsurface damage and surface micro-crack. Additionally, it is experimentally very difficult to observe all nanoscale physical phenomena due to in-process measurement problems, inaccessible contact area of tool and workpiece, and the difficulty of surface analysis. With the use of molecular dynamics (MD) which is a comprehensive nanoscale modelling technique, proper selection of process parameters, tool geometry and online monitoring techniques, production of freeform optics is possible through Ultra-high precision diamond turning (UHPDT). Though, depending on view point, machinability in UHPDT may be in terms of tool wear rate, hardness, chip morphology, surface roughness, and other benchmarks. These situations have called for more insights, which on the long run will help to achieve high precision manufacturing with predictability, repeatability, productivity and high infrared (IR) optical quality. In this thesis, UHPDT of monocrystalline silicon at atomistic scale was conducted to investigate combined effects of edge radius, feed rate, cutting speed, depth of cut, rake and clearance angles hitherto not done so far. Using appropriate potential functions with the MD algorithm, comprehensive analysis of thermal effects, diamond tool wear, phase change, cutting forces and machining stresses (normal, shear, hydrostatic and von Mises) were carried out. Dislocation extraction algorithm (DXA) and radial distribution function (RDF) were used to evaluate dislocation nucleation, variations in bond lengths, microstructural transformation and represents structural changes in histogram form. Selected parameters for optical quality surface roughness were afterwards compared and optimized through response surface methodology (RSM) based on Box Behnken (BBD) and Taguchi L9 methods. The results indicated that, silicon atoms in the chip formation zone undergo high pressure phase transformation (HPPT) at high hydrostatic pressure and temperature.Silicon microstructure transformed from four-coordinated diamond cubic structure (Si- I) to unstable six-coordinated body-centered tetragonal structure (β-silicon) which then transformed to amorphous silicon atoms (a-Si) through amorphization. These resulted in plastic deformation and defects in the machining zone causing subsurface damage. Stress analysis indicated that the compressive stress in the machining zone (i.e. amorphous region) suppressed crack formation contributing to continuous plastic flow which is responsible for silicon ductile-mode cutting. Furthermore, formation of silicon carbide which constituted diamond wear was observed to be by sp3 - sp2 diamond carbon atom disorder and tribochemistry. The tribochemistry occurred through both multiphase and solid-state single-phase reaction between diamond tool and silicon workpiece at cutting temperatures above and below 959 K. Both the experimental findings and the simulation results reveal that, at edge radius less than uncut chip thickness, tool wear was more of rake wear than flank wear. Tool wear and kinetic friction reduced as the edge radius approached the uncut chip thickness while forces, stresses and SCE increased. When machining silicon at differentratio, silicon stress state, SCE, SSD, forces (reduced with increase in clearance angle), shear plane, chip velocity and chip ratio increased as edge radius and rake angle increased, while, kinetic friction, chip length and thickness reduced. The crystal lattice of the machined surfaces and subsurface deformed layer depth increased with increase in edge radius, feed and rake angle. Amongst all tested and analysed parameters, feed rate had the highest influence on surface quality while depth of cut showed the least. Acoustic emission was also monitored during machining and its results statistically analysed. The trends of the monitored acoustic emissions showed its capability to adequately represent and predict surface roughness results. Based on the developed simulation model a novel method for quantitative assessment of tool wear was proposed. The proposed model can be used to compare tool wear using graphitization and tribochemistry to decide the path and mode of the diamond tool wear. Finally, based on the experiment results and predictive model, a novel combination and hierarchical arrangement of the considered factors capable of suppressing tool wear and improve attainable machined surface roughness when turning hard-to-machine materials was proposed. , Thesis (D.Phil) -- Faculty of Engineering, the Built Environment, and Technology, School of Engineering, 2019
- Full Text:
- Date Issued: 2019-04
- Authors: Abdulkadir, Lukman Niyi
- Date: 2019-04
- Subjects: Engineering design -- Data processing , Manufacturing processes -- Data processing , Mechatronics
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/66552 , vital:75601
- Description: Hard and brittle materials, such as silicon, silicon carbide etc., are widely used in aerospace, integrated circuit, and other fields due to their excellent physical and chemical properties. However, these materials display poor machinability owing to hardness, brittleness, non-linearity in machining process and complexities in selecting suitable machining parameters and tool geometry. These leads to low quality lenses due to subsurface damage and surface micro-crack. Additionally, it is experimentally very difficult to observe all nanoscale physical phenomena due to in-process measurement problems, inaccessible contact area of tool and workpiece, and the difficulty of surface analysis. With the use of molecular dynamics (MD) which is a comprehensive nanoscale modelling technique, proper selection of process parameters, tool geometry and online monitoring techniques, production of freeform optics is possible through Ultra-high precision diamond turning (UHPDT). Though, depending on view point, machinability in UHPDT may be in terms of tool wear rate, hardness, chip morphology, surface roughness, and other benchmarks. These situations have called for more insights, which on the long run will help to achieve high precision manufacturing with predictability, repeatability, productivity and high infrared (IR) optical quality. In this thesis, UHPDT of monocrystalline silicon at atomistic scale was conducted to investigate combined effects of edge radius, feed rate, cutting speed, depth of cut, rake and clearance angles hitherto not done so far. Using appropriate potential functions with the MD algorithm, comprehensive analysis of thermal effects, diamond tool wear, phase change, cutting forces and machining stresses (normal, shear, hydrostatic and von Mises) were carried out. Dislocation extraction algorithm (DXA) and radial distribution function (RDF) were used to evaluate dislocation nucleation, variations in bond lengths, microstructural transformation and represents structural changes in histogram form. Selected parameters for optical quality surface roughness were afterwards compared and optimized through response surface methodology (RSM) based on Box Behnken (BBD) and Taguchi L9 methods. The results indicated that, silicon atoms in the chip formation zone undergo high pressure phase transformation (HPPT) at high hydrostatic pressure and temperature.Silicon microstructure transformed from four-coordinated diamond cubic structure (Si- I) to unstable six-coordinated body-centered tetragonal structure (β-silicon) which then transformed to amorphous silicon atoms (a-Si) through amorphization. These resulted in plastic deformation and defects in the machining zone causing subsurface damage. Stress analysis indicated that the compressive stress in the machining zone (i.e. amorphous region) suppressed crack formation contributing to continuous plastic flow which is responsible for silicon ductile-mode cutting. Furthermore, formation of silicon carbide which constituted diamond wear was observed to be by sp3 - sp2 diamond carbon atom disorder and tribochemistry. The tribochemistry occurred through both multiphase and solid-state single-phase reaction between diamond tool and silicon workpiece at cutting temperatures above and below 959 K. Both the experimental findings and the simulation results reveal that, at edge radius less than uncut chip thickness, tool wear was more of rake wear than flank wear. Tool wear and kinetic friction reduced as the edge radius approached the uncut chip thickness while forces, stresses and SCE increased. When machining silicon at differentratio, silicon stress state, SCE, SSD, forces (reduced with increase in clearance angle), shear plane, chip velocity and chip ratio increased as edge radius and rake angle increased, while, kinetic friction, chip length and thickness reduced. The crystal lattice of the machined surfaces and subsurface deformed layer depth increased with increase in edge radius, feed and rake angle. Amongst all tested and analysed parameters, feed rate had the highest influence on surface quality while depth of cut showed the least. Acoustic emission was also monitored during machining and its results statistically analysed. The trends of the monitored acoustic emissions showed its capability to adequately represent and predict surface roughness results. Based on the developed simulation model a novel method for quantitative assessment of tool wear was proposed. The proposed model can be used to compare tool wear using graphitization and tribochemistry to decide the path and mode of the diamond tool wear. Finally, based on the experiment results and predictive model, a novel combination and hierarchical arrangement of the considered factors capable of suppressing tool wear and improve attainable machined surface roughness when turning hard-to-machine materials was proposed. , Thesis (D.Phil) -- Faculty of Engineering, the Built Environment, and Technology, School of Engineering, 2019
- Full Text:
- Date Issued: 2019-04
Optical surface quality and molecular dynamics modelling of ultra-high precision optical silicon machining
- Authors: Abdulkadir, Lukman Niyi
- Date: 2019-04
- Subjects: Lasers -- Industrial applications , Manufacturing processes , Materials science
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/66551 , vital:75600
- Description: Hard and brittle materials, such as silicon, silicon carbide etc., are widely used in aerospace, integrated circuit, and other fields due to their excellent physical and chemical properties. However, these materials display poor machinability owing to hardness, brittleness, non-linearity in machining process and complexities in selecting suitable machining parameters and tool geometry. These leads to low quality lenses due to subsurface damage and surface micro-crack. Additionally, it is experimentally very difficult to observe all nanoscale physical phenomena due to in-process measurement problems, inaccessible contact area of tool and workpiece, and the difficulty of surface analysis. With the use of molecular dynamics (MD) which is a comprehensive nanoscale modelling technique, proper selection of process parameters, tool geometry and online monitoring techniques, production of freeform optics is possible through Ultra-high precision diamond turning (UHPDT). Though, depending on view point, machinability in UHPDT may be in terms of tool wear rate, hardness, chip morphology, surface roughness, and other benchmarks. These situations have called for more insights, which on the long run will help to achieve high precision manufacturing with predictability, repeatability, productivity and high infrared (IR) optical quality. In this thesis, UHPDT of monocrystalline silicon at atomistic scale was conducted to investigate combined effects of edge radius, feed rate, cutting speed, depth of cut, rake and clearance angles hitherto not done so far. Using appropriate potential functions with the MD algorithm, comprehensive analysis of thermal effects, diamond tool wear, phase change, cutting forces and machining stresses (normal, shear, hydrostatic and von Mises) were carried out. Dislocation extraction algorithm (DXA) and radial distribution function (RDF) were used to evaluate dislocation nucleation, variations in bond lengths, microstructural transformation and represents structural changes in histogram form. Selected parameters for optical quality surface roughness were afterwards compared and optimized through response surface methodology (RSM) based on Box Behnken (BBD) and Taguchi L9 methods. The results indicated that, silicon atoms in the chip formation zone undergo high pressure phase transformation (HPPT) at high hydrostatic pressure and temperature Silicon microstructure transformed from four-coordinated diamond cubic structure (Si-I) to unstable six-coordinated body-centered tetragonal structure (β-silicon) which then transformed to amorphous silicon atoms (a-Si) through amorphization. These resulted in plastic deformation and defects in the machining zone causing subsurface damage. Stress analysis indicated that the compressive stress in the machining zone (i.e.amorphous region) suppressed crack formation contributing to continuous plastic flow which is responsible for silicon ductile-mode cutting. Furthermore, formation of silicon carbide which constituted diamond wear was observed to be by sp3 - sp2 diamond carbon atom disorder and tribochemistry. The tribochemistry occurred through both multiphase and solid-state single-phase reaction between diamond tool and silicon workpiece at cutting temperatures above and below 959 K. Both the experimental findings and the simulation results reveal that, at edge radius less than uncut chip thickness, tool wear was more of rake wear than flank wear. Tool wear and kinetic friction reduced as the edge radius approached the uncut chip thickness while forces, stresses and SCE increased. When machining silicon at different ratio, silicon stress state, SCE, SSD, forces (reduced with increase in clearance angle), shear plane, chip velocity and chip ratio increased as edge radius and rake angle increased, while, kinetic friction, chip length and thickness reduced. The crystal lattice of the machined surfaces and subsurface deformed layer depth increased with increase in edge radius, feed and rake angle. Amongst all tested and analysed parameters, feed rate had the highest influence on surface quality while depth of cut showed the least. Acoustic emission was also monitored during machining and its results statistically analysed. The trends of the monitored acoustic emissions showed its capability to adequately represent and predict surface roughness results. Based on the developed simulation model a novel method for quantitative assessment of tool wear was proposed. The proposed model can be used to compare tool wear using graphitization and tribochemistry to decide the path and mode of the diamond tool wear. Finally, based on the experiment results and predictive model, a novel combination and hierarchical arrangement of the considered factors capable of suppressing tool wear and improve attainable machined surface roughness when turning hard-to-machine materials was proposed. , Thesis (PhD) -- Faculty of Engineering, the Built Environment, and Technology, School of Engineering, 2019
- Full Text:
- Date Issued: 2019-04
- Authors: Abdulkadir, Lukman Niyi
- Date: 2019-04
- Subjects: Lasers -- Industrial applications , Manufacturing processes , Materials science
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/66551 , vital:75600
- Description: Hard and brittle materials, such as silicon, silicon carbide etc., are widely used in aerospace, integrated circuit, and other fields due to their excellent physical and chemical properties. However, these materials display poor machinability owing to hardness, brittleness, non-linearity in machining process and complexities in selecting suitable machining parameters and tool geometry. These leads to low quality lenses due to subsurface damage and surface micro-crack. Additionally, it is experimentally very difficult to observe all nanoscale physical phenomena due to in-process measurement problems, inaccessible contact area of tool and workpiece, and the difficulty of surface analysis. With the use of molecular dynamics (MD) which is a comprehensive nanoscale modelling technique, proper selection of process parameters, tool geometry and online monitoring techniques, production of freeform optics is possible through Ultra-high precision diamond turning (UHPDT). Though, depending on view point, machinability in UHPDT may be in terms of tool wear rate, hardness, chip morphology, surface roughness, and other benchmarks. These situations have called for more insights, which on the long run will help to achieve high precision manufacturing with predictability, repeatability, productivity and high infrared (IR) optical quality. In this thesis, UHPDT of monocrystalline silicon at atomistic scale was conducted to investigate combined effects of edge radius, feed rate, cutting speed, depth of cut, rake and clearance angles hitherto not done so far. Using appropriate potential functions with the MD algorithm, comprehensive analysis of thermal effects, diamond tool wear, phase change, cutting forces and machining stresses (normal, shear, hydrostatic and von Mises) were carried out. Dislocation extraction algorithm (DXA) and radial distribution function (RDF) were used to evaluate dislocation nucleation, variations in bond lengths, microstructural transformation and represents structural changes in histogram form. Selected parameters for optical quality surface roughness were afterwards compared and optimized through response surface methodology (RSM) based on Box Behnken (BBD) and Taguchi L9 methods. The results indicated that, silicon atoms in the chip formation zone undergo high pressure phase transformation (HPPT) at high hydrostatic pressure and temperature Silicon microstructure transformed from four-coordinated diamond cubic structure (Si-I) to unstable six-coordinated body-centered tetragonal structure (β-silicon) which then transformed to amorphous silicon atoms (a-Si) through amorphization. These resulted in plastic deformation and defects in the machining zone causing subsurface damage. Stress analysis indicated that the compressive stress in the machining zone (i.e.amorphous region) suppressed crack formation contributing to continuous plastic flow which is responsible for silicon ductile-mode cutting. Furthermore, formation of silicon carbide which constituted diamond wear was observed to be by sp3 - sp2 diamond carbon atom disorder and tribochemistry. The tribochemistry occurred through both multiphase and solid-state single-phase reaction between diamond tool and silicon workpiece at cutting temperatures above and below 959 K. Both the experimental findings and the simulation results reveal that, at edge radius less than uncut chip thickness, tool wear was more of rake wear than flank wear. Tool wear and kinetic friction reduced as the edge radius approached the uncut chip thickness while forces, stresses and SCE increased. When machining silicon at different ratio, silicon stress state, SCE, SSD, forces (reduced with increase in clearance angle), shear plane, chip velocity and chip ratio increased as edge radius and rake angle increased, while, kinetic friction, chip length and thickness reduced. The crystal lattice of the machined surfaces and subsurface deformed layer depth increased with increase in edge radius, feed and rake angle. Amongst all tested and analysed parameters, feed rate had the highest influence on surface quality while depth of cut showed the least. Acoustic emission was also monitored during machining and its results statistically analysed. The trends of the monitored acoustic emissions showed its capability to adequately represent and predict surface roughness results. Based on the developed simulation model a novel method for quantitative assessment of tool wear was proposed. The proposed model can be used to compare tool wear using graphitization and tribochemistry to decide the path and mode of the diamond tool wear. Finally, based on the experiment results and predictive model, a novel combination and hierarchical arrangement of the considered factors capable of suppressing tool wear and improve attainable machined surface roughness when turning hard-to-machine materials was proposed. , Thesis (PhD) -- Faculty of Engineering, the Built Environment, and Technology, School of Engineering, 2019
- Full Text:
- Date Issued: 2019-04
Pyridone substituted phthalocyanines: Photophysico-chemical properties and TD-DFT calculations
- Abdurrahmanoğlu, Şaziye, Canlica, Mevlüde, Mack, John, Nyokong, Tebello
- Authors: Abdurrahmanoğlu, Şaziye , Canlica, Mevlüde , Mack, John , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188216 , vital:44735 , xlink:href="https://doi.org/10.1142/S1088424617500730"
- Description: 4-(6-methyl-3-nitro-2-oxo-1,2-dihydropyridin-4-yloxy)phthalonitrile has been used to prepare a novel Zn(II) phthalocyanines with four peripheral pyridone substituents. The compound has been characterized by UV-visible absorption, FT-IR and 11H-NMR spectroscopy, elemental analysis and MALDI-TOF mass spectroscopy. The fluorescence, triplet quantum and singlet oxygen quantum yields have been determined and TD-DFT calculations have been used to identify trends in the electronic structure.
- Full Text:
- Date Issued: 2018
- Authors: Abdurrahmanoğlu, Şaziye , Canlica, Mevlüde , Mack, John , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188216 , vital:44735 , xlink:href="https://doi.org/10.1142/S1088424617500730"
- Description: 4-(6-methyl-3-nitro-2-oxo-1,2-dihydropyridin-4-yloxy)phthalonitrile has been used to prepare a novel Zn(II) phthalocyanines with four peripheral pyridone substituents. The compound has been characterized by UV-visible absorption, FT-IR and 11H-NMR spectroscopy, elemental analysis and MALDI-TOF mass spectroscopy. The fluorescence, triplet quantum and singlet oxygen quantum yields have been determined and TD-DFT calculations have been used to identify trends in the electronic structure.
- Full Text:
- Date Issued: 2018
In vitro investigation of the anti-hyperglycemic and chemical composition of Heteromorpha arborescens (Spreng.) Cham leaf extracts used in the management of diabetes mellitus
- Abifarin, Taiwo Oluwafunmilola https://orcid.org/00000003-4994-4638
- Authors: Abifarin, Taiwo Oluwafunmilola https://orcid.org/00000003-4994-4638
- Date: 2021-09
- Subjects: Diabetes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22798 , vital:52760
- Description: Diabetes mellitus is currently a major threat all over the world. It is a chronic disorder characterized by elevated blood glucose levels and disturbance in carbohydrate, fat and protein metabolism which often times leads to several complications such as, atherosclerosis, diabetic nephropathy, retinopathy and neuropathy. Due to the side effects associated with synthetic oral hypoglycemic drugs, herbal remedies have become the alternative in the management of diabetes mellitus. Heteromorpha arborescens is one of the many plants used as herbal remedies for the management of diabetes mellitus in South Africa. In addition, the roots, barks and leaves are used in other parts of Southern Africa for the treatment of mental problems, asthma, cough, dysentery and tuberculosis. The roots are fed to malnourished children in Botswana and Swaziland. However, despite the high medicinal importance, there is little or no scientificinformation to prove this claim. Therefore, the basis of this study is to determine the chemical composition as well as perform and invitro investigation of the antihyperglycemic potential of H. arborescens leaf extracts to provide information that could validate the ethno-medicinal claims for the use of this plant in the management of diabetes mellitus. Phytochemical contents and antioxidant activity of the leaf extracts were determined. Phytochemical analysis of the acetone, ethanol, aqueous and blanched extracts of H. arborescens leaves indicated that the total phenol content of the extracts ranged between 15.10 mg GAE/g- 42.50 mg QAE/g, proanthocyanidin, 459-8402.1 mg QE/g and the flavonoid content, 109.24- 235.79 mg QE/g. In addition, alkaloids (7.65percent) and saponin (25.33percent) were present in significantamounts. Based on the IC50 values, the ethanol extract exhibited the highest total antioxidant activity (0.0125 mg/mL) with highest inhibition against DPPH and ABTS radicals (0.06 and 0.049 mg/mL respectively). Relatively high antioxidant activity may be attributed to the polyphenolic contents which possess hypoglycemic potentials. Minimum Inhibitory Concentrations (MIC) of H. arborescens leaf extracts against Bacillus pumilus, Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli and Klebselia pneumoniae was also determined and results indicated considerable antibacterial activity in the acetone, ethanol and blanched extracts with MIC values ranging from 1.563-12.5 mg/mL; however, the aqueous extract was inactive against all the bacteria strains. The antibacterial activity of the leaf extracts could be advantageous against diabetic related infections. The cytotoxicity, anti-obesity and antidiabetic potentials of blanched, aqueous and ethanol extracts of Heteromorpha arborescens (Spreng.) Cham leaves were also investigated. The results revealed that both ethanol and aqueous extracts indicated considerable inhibition against α-glucosidase (IC50 of 627.29 ± 4.33 μg/mL and 576.46 ± 3.21 μg/mL respectively) while the blanched extract showed weak α- glucosidase inhibition (IC50; 855.38 ± 4.29 μg/mL). The aqueous extract showed the best α- amylase inhibition (IC50; 583.74 ± 5.87 μg/mL) among the assessed extracts. However, weak α- amylase inhibition was observed in the ethanol (IC50; 724.60 ± 4.33 μg/mL) and blanched extracts (IC50; 791.63 ± 3.76 μg/mL) of H. arborescens leaves. Some level of glucose utilization in both C3A and L6 cells was also observed for the aqueous and ethanol extracts which may be attributed to the relatively lower toxicity levels present in them, however, glucose utilization was very weak for the blanched extract, which may be due to higher level of cytotoxicity it possessed. Relatively weak lipase inhibition was observed for the ethanol (IC50; 699.3 ± 1.33 μg/mL), aqueous (IC50; 811.52 ± 3.52 μg/mL) and blanched extract (IC50; 1152.7 ± 4.61 μg/mL) as compared to orlistat (IC50; 56.88 ± 0.11 μg/mL). However, there was no reasonable reduction in lipid accumulation observed in all the extract treated cells. The results obtained suggest that H.arborescens leaf extracts can serve as a potential tool for the development of new strategies for the treatment of diabetes and obesity. However, further analysis is required to ascertain its anti- obesity potential. Also, caution should be taken in the use of the plant at high concentrations in order to ensure safety and efficacy. Analyses were also carried out to determine the nutritional and antinutritional constituents of the plant for possible inclusion in the diet of diabetic patients. Proximate analysis revealed the presence of 8.5 percent total ash, 4.92 percent crude fat, 8.41 percent moisture, 15.74 percent crude protein, 21.48 percent crude fiber, 40.95 percent carbohydrates and 271.04 kcal/100g energy value. Mineral analysis showed that H. arborescens leaves are very rich in K, Ca, and Fe. Considerable amounts of Mg, Mn, Na, P, Cu and Zn were also present. Vitamin analysis showed that the plant has a high content of vitamins A, C and E. The anti-nutrients evaluated were phytate, oxalate, saponin, and alkaloids, all of which were below toxic levels except for saponin which was observed in moderately high level. This study revealed that H. arborescens leaves are a good source of nutrients and mineral elements, (with low anti-nutrient content) that are highly beneficial to human health especially in diabetic individuals, therefore, encouraging its possible inclusion as a vegetable. Essential oil composition of fresh Heteromorphaarborescens leaves were also determined by Solvent-Free-Microwave-Extraction (SFME) and Hydrodistillation (HD) methods and the compositions of both mehods were compared in terms of their chemical compositions, yield, CO2 emission and energy consumption. Solvent Free Microwave extraction method indicated higher oil yield of 0.7 mL/200 g (0.35 percent) as compared to 0.59 mL/200 g (0.295 percent), lower energy consumption and CO2 emission as compared to the hydrodistillation method. In conclusion, H. arborescens leaves indicated considerable potential efficacy in the management for diabetes mellitus and may require further structural elucidation and characterization in order to identify the bioactive constituents. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-09
- Authors: Abifarin, Taiwo Oluwafunmilola https://orcid.org/00000003-4994-4638
- Date: 2021-09
- Subjects: Diabetes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22798 , vital:52760
- Description: Diabetes mellitus is currently a major threat all over the world. It is a chronic disorder characterized by elevated blood glucose levels and disturbance in carbohydrate, fat and protein metabolism which often times leads to several complications such as, atherosclerosis, diabetic nephropathy, retinopathy and neuropathy. Due to the side effects associated with synthetic oral hypoglycemic drugs, herbal remedies have become the alternative in the management of diabetes mellitus. Heteromorpha arborescens is one of the many plants used as herbal remedies for the management of diabetes mellitus in South Africa. In addition, the roots, barks and leaves are used in other parts of Southern Africa for the treatment of mental problems, asthma, cough, dysentery and tuberculosis. The roots are fed to malnourished children in Botswana and Swaziland. However, despite the high medicinal importance, there is little or no scientificinformation to prove this claim. Therefore, the basis of this study is to determine the chemical composition as well as perform and invitro investigation of the antihyperglycemic potential of H. arborescens leaf extracts to provide information that could validate the ethno-medicinal claims for the use of this plant in the management of diabetes mellitus. Phytochemical contents and antioxidant activity of the leaf extracts were determined. Phytochemical analysis of the acetone, ethanol, aqueous and blanched extracts of H. arborescens leaves indicated that the total phenol content of the extracts ranged between 15.10 mg GAE/g- 42.50 mg QAE/g, proanthocyanidin, 459-8402.1 mg QE/g and the flavonoid content, 109.24- 235.79 mg QE/g. In addition, alkaloids (7.65percent) and saponin (25.33percent) were present in significantamounts. Based on the IC50 values, the ethanol extract exhibited the highest total antioxidant activity (0.0125 mg/mL) with highest inhibition against DPPH and ABTS radicals (0.06 and 0.049 mg/mL respectively). Relatively high antioxidant activity may be attributed to the polyphenolic contents which possess hypoglycemic potentials. Minimum Inhibitory Concentrations (MIC) of H. arborescens leaf extracts against Bacillus pumilus, Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli and Klebselia pneumoniae was also determined and results indicated considerable antibacterial activity in the acetone, ethanol and blanched extracts with MIC values ranging from 1.563-12.5 mg/mL; however, the aqueous extract was inactive against all the bacteria strains. The antibacterial activity of the leaf extracts could be advantageous against diabetic related infections. The cytotoxicity, anti-obesity and antidiabetic potentials of blanched, aqueous and ethanol extracts of Heteromorpha arborescens (Spreng.) Cham leaves were also investigated. The results revealed that both ethanol and aqueous extracts indicated considerable inhibition against α-glucosidase (IC50 of 627.29 ± 4.33 μg/mL and 576.46 ± 3.21 μg/mL respectively) while the blanched extract showed weak α- glucosidase inhibition (IC50; 855.38 ± 4.29 μg/mL). The aqueous extract showed the best α- amylase inhibition (IC50; 583.74 ± 5.87 μg/mL) among the assessed extracts. However, weak α- amylase inhibition was observed in the ethanol (IC50; 724.60 ± 4.33 μg/mL) and blanched extracts (IC50; 791.63 ± 3.76 μg/mL) of H. arborescens leaves. Some level of glucose utilization in both C3A and L6 cells was also observed for the aqueous and ethanol extracts which may be attributed to the relatively lower toxicity levels present in them, however, glucose utilization was very weak for the blanched extract, which may be due to higher level of cytotoxicity it possessed. Relatively weak lipase inhibition was observed for the ethanol (IC50; 699.3 ± 1.33 μg/mL), aqueous (IC50; 811.52 ± 3.52 μg/mL) and blanched extract (IC50; 1152.7 ± 4.61 μg/mL) as compared to orlistat (IC50; 56.88 ± 0.11 μg/mL). However, there was no reasonable reduction in lipid accumulation observed in all the extract treated cells. The results obtained suggest that H.arborescens leaf extracts can serve as a potential tool for the development of new strategies for the treatment of diabetes and obesity. However, further analysis is required to ascertain its anti- obesity potential. Also, caution should be taken in the use of the plant at high concentrations in order to ensure safety and efficacy. Analyses were also carried out to determine the nutritional and antinutritional constituents of the plant for possible inclusion in the diet of diabetic patients. Proximate analysis revealed the presence of 8.5 percent total ash, 4.92 percent crude fat, 8.41 percent moisture, 15.74 percent crude protein, 21.48 percent crude fiber, 40.95 percent carbohydrates and 271.04 kcal/100g energy value. Mineral analysis showed that H. arborescens leaves are very rich in K, Ca, and Fe. Considerable amounts of Mg, Mn, Na, P, Cu and Zn were also present. Vitamin analysis showed that the plant has a high content of vitamins A, C and E. The anti-nutrients evaluated were phytate, oxalate, saponin, and alkaloids, all of which were below toxic levels except for saponin which was observed in moderately high level. This study revealed that H. arborescens leaves are a good source of nutrients and mineral elements, (with low anti-nutrient content) that are highly beneficial to human health especially in diabetic individuals, therefore, encouraging its possible inclusion as a vegetable. Essential oil composition of fresh Heteromorphaarborescens leaves were also determined by Solvent-Free-Microwave-Extraction (SFME) and Hydrodistillation (HD) methods and the compositions of both mehods were compared in terms of their chemical compositions, yield, CO2 emission and energy consumption. Solvent Free Microwave extraction method indicated higher oil yield of 0.7 mL/200 g (0.35 percent) as compared to 0.59 mL/200 g (0.295 percent), lower energy consumption and CO2 emission as compared to the hydrodistillation method. In conclusion, H. arborescens leaves indicated considerable potential efficacy in the management for diabetes mellitus and may require further structural elucidation and characterization in order to identify the bioactive constituents. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-09
International legal protection of women's reproductive rights: a comparative analysis of abortion laws and policies in four jurisdictions-Nigeria, Ghana, South Africa and U.S.A.
- Authors: Abiodun, Adeleke Funminiyi
- Date: 2010-10
- Subjects: Abortion -- Law and legislation , Reproductive right
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/25839 , vital:64491
- Description: The subject matter of abortion law is extremely broad and multi-disciplinary. While naturally having its basis in criminal and constitutional law of individual states, the global development of abortion discourse has been influenced by the need to protect the reproductive rights of women as a sub-set of international human rights laws; thereby advocating not only the decriminalisation of abortion but also, that individual State should take affirmative actions in promoting abortion as a right for every woman. However, that induced abortion is a punishable criminal act or a “protectable” woman’s reproductive right remains controversial due to the plethora of perspectives, beliefs and reservations held by different groups of people which are multi-dimensional and contradictory. This thesis therefore attempts a comparative study of abortion laws and policies in four jurisdictions: Nigeria and Ghana, operating criminalised abortion laws, South Africa and United States which operate liberalised/permissive abortion laws and policies. The study basically examines the legal status and reproductive rights of women to legal and safe abortion within the existing legal framework of national laws of the four selected jurisdictions vis-à-vis the legal protection offered by various international instruments on human rights. While we show that strict and restrictive abortion laws, and also, failure of States to create conditions for safe abortion constitute infractions of the reproductive rights of women, we submit further that over-liberalisation of abortion laws and policies could also amount to infringement of the basic rights of other people, thus there is need to ensure a legal and acceptable balance. The study finally acknowledges the role of international human rights laws in the protection of women’s right to legal and safe abortion but asserts that there can be no universally acceptable morality to which the whole world could subsume in term of women’s right to abortion due to the interplay of socio-cultural, religious, and moral affiliations of the people in different communities. , Thesis (LLD) -- Faculty of Law, 2010
- Full Text:
- Date Issued: 2010-10
- Authors: Abiodun, Adeleke Funminiyi
- Date: 2010-10
- Subjects: Abortion -- Law and legislation , Reproductive right
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/25839 , vital:64491
- Description: The subject matter of abortion law is extremely broad and multi-disciplinary. While naturally having its basis in criminal and constitutional law of individual states, the global development of abortion discourse has been influenced by the need to protect the reproductive rights of women as a sub-set of international human rights laws; thereby advocating not only the decriminalisation of abortion but also, that individual State should take affirmative actions in promoting abortion as a right for every woman. However, that induced abortion is a punishable criminal act or a “protectable” woman’s reproductive right remains controversial due to the plethora of perspectives, beliefs and reservations held by different groups of people which are multi-dimensional and contradictory. This thesis therefore attempts a comparative study of abortion laws and policies in four jurisdictions: Nigeria and Ghana, operating criminalised abortion laws, South Africa and United States which operate liberalised/permissive abortion laws and policies. The study basically examines the legal status and reproductive rights of women to legal and safe abortion within the existing legal framework of national laws of the four selected jurisdictions vis-à-vis the legal protection offered by various international instruments on human rights. While we show that strict and restrictive abortion laws, and also, failure of States to create conditions for safe abortion constitute infractions of the reproductive rights of women, we submit further that over-liberalisation of abortion laws and policies could also amount to infringement of the basic rights of other people, thus there is need to ensure a legal and acceptable balance. The study finally acknowledges the role of international human rights laws in the protection of women’s right to legal and safe abortion but asserts that there can be no universally acceptable morality to which the whole world could subsume in term of women’s right to abortion due to the interplay of socio-cultural, religious, and moral affiliations of the people in different communities. , Thesis (LLD) -- Faculty of Law, 2010
- Full Text:
- Date Issued: 2010-10
Perceptions of social media as a tool for research: a study of postgraduate students, University of Fort Hare, Alice campus
- Authors: Abolanle, Ogunnubi Adeyemi
- Date: 2014-10
- Subjects: University of Fort Hare , Media literacy , Internet research
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/26381 , vital:65299
- Description: The study aimed at examining the perceptions of social media as a tool for research among postgraduate students at the University of Fort Hare, Alice campus. Data were collected using a quantitative research approach by administering structured questionnaires to 310 postgraduate students under the cluster sampling across different faculties and departments, and analysed by SPSS Statistical software and Chi-square test. 264 questionnaires were returned for analysis and these respondents maintained that they utilized social media platforms for their academic research. The findings further revealed that social media has to a large extent improved students‟ research activities as they frequently seek practical knowledge for demonstration and tutorship. Furthermore, the respondents regard social media as a good platform for research topics in audio and video formats, scholarly articles, journals and books. This study concluded that since students explore the social media platforms and search engines for various reasons, academic research inclusive, it therefore becomes imperative to create more links within the social media for students to explore books, scholarly journals and articles necessary for research and academic purposes. , Thesis (MSoc) -- Faculty of Social Sciences and Humanities, 2014
- Full Text:
- Date Issued: 2014-10
- Authors: Abolanle, Ogunnubi Adeyemi
- Date: 2014-10
- Subjects: University of Fort Hare , Media literacy , Internet research
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/26381 , vital:65299
- Description: The study aimed at examining the perceptions of social media as a tool for research among postgraduate students at the University of Fort Hare, Alice campus. Data were collected using a quantitative research approach by administering structured questionnaires to 310 postgraduate students under the cluster sampling across different faculties and departments, and analysed by SPSS Statistical software and Chi-square test. 264 questionnaires were returned for analysis and these respondents maintained that they utilized social media platforms for their academic research. The findings further revealed that social media has to a large extent improved students‟ research activities as they frequently seek practical knowledge for demonstration and tutorship. Furthermore, the respondents regard social media as a good platform for research topics in audio and video formats, scholarly articles, journals and books. This study concluded that since students explore the social media platforms and search engines for various reasons, academic research inclusive, it therefore becomes imperative to create more links within the social media for students to explore books, scholarly journals and articles necessary for research and academic purposes. , Thesis (MSoc) -- Faculty of Social Sciences and Humanities, 2014
- Full Text:
- Date Issued: 2014-10
Exploring targeted metagenomics and untargeted metabolomics for characterising aquaponics bacterial ecology and phytochemistry
- Authors: Abraham, Benjamin Melakail
- Date: 2021-10-29
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192453 , vital:45227
- Description: Thesis (MSc) -- Faculty of Science, Biochemistry and Microbiology, 2021
- Full Text:
- Date Issued: 2021-10-29
- Authors: Abraham, Benjamin Melakail
- Date: 2021-10-29
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192453 , vital:45227
- Description: Thesis (MSc) -- Faculty of Science, Biochemistry and Microbiology, 2021
- Full Text:
- Date Issued: 2021-10-29
An exploration into an ESD-based teaching strategy to improve the critical thinking and problem-solving skills amongst development studies students at Nelson Mandela University
- Authors: Abrahams, Andre John
- Date: 2021-04
- Subjects: Sustainable development -- Study and teaching , Universities and colleges -- South Africa , Critical thinking
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/50906 , vital:43149
- Description: In recent years, Education for Sustainable Development (ESD) has been a significant focus for research pertaining to teacher education and transformative approaches to teaching and learning. However, there has been less specific focus on the implementation of ESD in the context of higher education. This study, therefore, explored the use of an ESD-based teaching and learning approach in an undergraduate Development Studies programme. The focus was on developing a teaching approach that was informed by the principles of ESD and which could assist Development Studies lecturers in creating a more transformative, student-centred environment. This study was a qualitative undertaking, conducted at the Nelson Mandela University’s (NMU) Development Studies undergraduate programme. The ESD-based approach was implemented by two participating lecturers who utilised the approach across four undergraduate classes. Qualitative data were generated through a systematic literature analysis (SLA), exploratory interviews, student exercises and assessments, focus group discussions, and reflective journal entries. The gathered data were then analysed using a framework analysis rubric adapted from the theoretical framework utilised in the study. In addition, the data were coded using the six coding techniques promoted by Saldaña (2013). The findings suggest that the ESD-based approach developed in the study could effectively contribute towards promoting ESD in the Development Studies programme. The findings also suggest that, when properly implemented, the ESD-based approach could assist lecturers in creating a more transformative learning environment where students have greater control over their learning experience. In addition, this study found that students in the selected Development Studies undergraduate programme could benefit from continued exposure to the teaching methods and techniques adopted in the approach. The implementation of the approach also uncovered some of the inhibiting factors that may prevent an ESD-based approach being mainstreamed into the context of higher education. , Thesis (DPhil) -- Faculty of Business and Economic Sciences, Development Studies, 2021
- Full Text:
- Date Issued: 2021-04
- Authors: Abrahams, Andre John
- Date: 2021-04
- Subjects: Sustainable development -- Study and teaching , Universities and colleges -- South Africa , Critical thinking
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/50906 , vital:43149
- Description: In recent years, Education for Sustainable Development (ESD) has been a significant focus for research pertaining to teacher education and transformative approaches to teaching and learning. However, there has been less specific focus on the implementation of ESD in the context of higher education. This study, therefore, explored the use of an ESD-based teaching and learning approach in an undergraduate Development Studies programme. The focus was on developing a teaching approach that was informed by the principles of ESD and which could assist Development Studies lecturers in creating a more transformative, student-centred environment. This study was a qualitative undertaking, conducted at the Nelson Mandela University’s (NMU) Development Studies undergraduate programme. The ESD-based approach was implemented by two participating lecturers who utilised the approach across four undergraduate classes. Qualitative data were generated through a systematic literature analysis (SLA), exploratory interviews, student exercises and assessments, focus group discussions, and reflective journal entries. The gathered data were then analysed using a framework analysis rubric adapted from the theoretical framework utilised in the study. In addition, the data were coded using the six coding techniques promoted by Saldaña (2013). The findings suggest that the ESD-based approach developed in the study could effectively contribute towards promoting ESD in the Development Studies programme. The findings also suggest that, when properly implemented, the ESD-based approach could assist lecturers in creating a more transformative learning environment where students have greater control over their learning experience. In addition, this study found that students in the selected Development Studies undergraduate programme could benefit from continued exposure to the teaching methods and techniques adopted in the approach. The implementation of the approach also uncovered some of the inhibiting factors that may prevent an ESD-based approach being mainstreamed into the context of higher education. , Thesis (DPhil) -- Faculty of Business and Economic Sciences, Development Studies, 2021
- Full Text:
- Date Issued: 2021-04
Massed prolonged exposure therapy for PTSD and alcohol use: a single case experimental study of a university student
- Authors: Abrahams, Sherwin Owen
- Date: 2025-04-25
- Subjects: Prolonged exposure therapy , Post-traumatic stress disorder , Alcoholism , Flooding , College students Alcohol use South Africa , College students Psychology
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/478284 , vital:78173
- Description: Post-traumatic stress disorder (PTSD) and alcohol use disorder (AUD) are common among university students in South Africa. Bantjies et al. (2023) found a PTSD prevalence of 21.0% (n=28,268), and McGowan and Kagee (2013) reported that 90% (n=1337) had experienced at least one traumatic event. There is a high comorbidity between PTSD and AUD, especially in hazardous drinkers (Peltzer & Pengpid, 2015). Despite the prevalence, research on effective trauma-focused therapies (TFTs) in low-resource settings is limited (Booysen & Kagee, 2021). This study evaluates the effectiveness of massed-prolonged exposure (MPE) therapy for comorbid PTSD and AUD among South African university students, using a Single-Case Experimental Design (SCED). The participant (n=1) underwent comprehensive assessments using CAPS-5, AUDIT, PDS-5, and PCL-5, confirming PTSD and AUD diagnoses. Regular PCL-5 assessments during the intervention showed significant symptom improvement, and post-intervention assessments indicated the participant no longer met PTSD criteria. AUDIT scores also improved from 11 (harmful/hazardous drinking) to 6. The participant found MPE therapy to be feasible, acceptable, and appropriate. This study supports the effectiveness, feasibility and acceptability of MPE therapy and highlights the importance of evidence-based interventions to improve PTSD outcomes within university settings and in low-to-middle-income countries. , Thesis (MA) -- Faculty of Humanities, Psychology, 2025
- Full Text:
- Date Issued: 2025-04-25
- Authors: Abrahams, Sherwin Owen
- Date: 2025-04-25
- Subjects: Prolonged exposure therapy , Post-traumatic stress disorder , Alcoholism , Flooding , College students Alcohol use South Africa , College students Psychology
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/478284 , vital:78173
- Description: Post-traumatic stress disorder (PTSD) and alcohol use disorder (AUD) are common among university students in South Africa. Bantjies et al. (2023) found a PTSD prevalence of 21.0% (n=28,268), and McGowan and Kagee (2013) reported that 90% (n=1337) had experienced at least one traumatic event. There is a high comorbidity between PTSD and AUD, especially in hazardous drinkers (Peltzer & Pengpid, 2015). Despite the prevalence, research on effective trauma-focused therapies (TFTs) in low-resource settings is limited (Booysen & Kagee, 2021). This study evaluates the effectiveness of massed-prolonged exposure (MPE) therapy for comorbid PTSD and AUD among South African university students, using a Single-Case Experimental Design (SCED). The participant (n=1) underwent comprehensive assessments using CAPS-5, AUDIT, PDS-5, and PCL-5, confirming PTSD and AUD diagnoses. Regular PCL-5 assessments during the intervention showed significant symptom improvement, and post-intervention assessments indicated the participant no longer met PTSD criteria. AUDIT scores also improved from 11 (harmful/hazardous drinking) to 6. The participant found MPE therapy to be feasible, acceptable, and appropriate. This study supports the effectiveness, feasibility and acceptability of MPE therapy and highlights the importance of evidence-based interventions to improve PTSD outcomes within university settings and in low-to-middle-income countries. , Thesis (MA) -- Faculty of Humanities, Psychology, 2025
- Full Text:
- Date Issued: 2025-04-25
Classification and clustering based methods for outlier detection of solar resource data
- Authors: Abrahams, Waldo
- Date: 2022-04
- Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/55423 , vital:51996
- Description: Almost 90% of the primary global energy demand is serviced from the burning of fossil fuels (Abas, Kalair & Khan, 2015). Owing to the detrimental environmental impact of this, a global energy transition to the use of renewable energy, including solar energy, is needed (Gielen et al., 2019). An important aspect that inhibits the growth of solar energy is accurate solar resource data. Such data is needed because knowledge of the future reliability and quality of energy production is required to analyse a system’s performance and determine financial implications (Sengupta et al., 2017). Existing methods used to detect outliers in solar resource data do not efficiently identify outliers and an accurate and robust approach is required (Eastwood, 2019). Using simulated and real-world data, this study investigates the use of several classification methods, along with a two-stage clustering-classification approach to accurately identify outliers in solar resource data. The Treebag method proves to be an adequate outlier detection method for solar resource data. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2022
- Full Text:
- Date Issued: 2022-04
- Authors: Abrahams, Waldo
- Date: 2022-04
- Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/55423 , vital:51996
- Description: Almost 90% of the primary global energy demand is serviced from the burning of fossil fuels (Abas, Kalair & Khan, 2015). Owing to the detrimental environmental impact of this, a global energy transition to the use of renewable energy, including solar energy, is needed (Gielen et al., 2019). An important aspect that inhibits the growth of solar energy is accurate solar resource data. Such data is needed because knowledge of the future reliability and quality of energy production is required to analyse a system’s performance and determine financial implications (Sengupta et al., 2017). Existing methods used to detect outliers in solar resource data do not efficiently identify outliers and an accurate and robust approach is required (Eastwood, 2019). Using simulated and real-world data, this study investigates the use of several classification methods, along with a two-stage clustering-classification approach to accurately identify outliers in solar resource data. The Treebag method proves to be an adequate outlier detection method for solar resource data. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2022
- Full Text:
- Date Issued: 2022-04
Exploring the diverse racialised responses to the ‘Ashwin Willemse incident’ through theories of race and coloniality of being
- Authors: Accom, Abner
- Date: 2022-10-14
- Subjects: Willemse, Ashwin, 1981- , Ethnic attitudes South Africa , Race awareness South Africa , Postcolonialism South Africa , South Africa Race relations , Decolonization South Africa , Racism in sports South Africa
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/405908 , vital:70218
- Description: On 19 May 2018 Ashwin Willemse, a coloured Springbok rugby player walked off the SuperSport set, a DSTV sports program, during a live broadcast. He accused his white co-hosts Nick Mallet and Naas Botha (two white apartheid-era Springboks) of patronising him (SABC News, 2018; Eyewitness News, 2018). Responses to the Willemse incident reflected racial divisions in the country. It appeared that many white South Africans criticised Willemse’s behaviour, while many black South Africans stated that they could identify with his response to the subtle racisms experienced in everyday life, and which he claimed to have experienced on the SuperSport program (SABC News, 2018; Eyewitness News, 2018). The racialised media outcry led Professor Jonathan Jansen, to ask: “why do two groups of people, staring at the same event ‘see’ two different realities” (Maleka, 2018: 4)? This thesis probes possible answers to Jonathan Jansen’s question regarding the Ashwin Willemse walkout. The thesis explores and analyses the diverse racialised responses to the ‘Willemse walkout’ through race theories and ‘coloniality of being’. Qualitative research methods were used in the form of a reception analysis involving two racially homogenous (black and white) focus group interviews, two in-depth individual interviews with black research participants, three in-depth individual interviews with white research participants, and a sample of tweets from black and white commentators who had opinions about the ‘Willemse walkout’. The thesis concludes that most black research participants supported Willemse’s actions and most of the white people in the group disagreed with Willemse’s behaviour. Their various opinions were largely due to their different lived experiences which were a consequence of South Africa’s colonial history, apartheid, and racial discrimination. , Thesis (MA) -- Faculty of Humanities, School of Journalism and Media Studies, 2022
- Full Text:
- Date Issued: 2022-10-14
- Authors: Accom, Abner
- Date: 2022-10-14
- Subjects: Willemse, Ashwin, 1981- , Ethnic attitudes South Africa , Race awareness South Africa , Postcolonialism South Africa , South Africa Race relations , Decolonization South Africa , Racism in sports South Africa
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/405908 , vital:70218
- Description: On 19 May 2018 Ashwin Willemse, a coloured Springbok rugby player walked off the SuperSport set, a DSTV sports program, during a live broadcast. He accused his white co-hosts Nick Mallet and Naas Botha (two white apartheid-era Springboks) of patronising him (SABC News, 2018; Eyewitness News, 2018). Responses to the Willemse incident reflected racial divisions in the country. It appeared that many white South Africans criticised Willemse’s behaviour, while many black South Africans stated that they could identify with his response to the subtle racisms experienced in everyday life, and which he claimed to have experienced on the SuperSport program (SABC News, 2018; Eyewitness News, 2018). The racialised media outcry led Professor Jonathan Jansen, to ask: “why do two groups of people, staring at the same event ‘see’ two different realities” (Maleka, 2018: 4)? This thesis probes possible answers to Jonathan Jansen’s question regarding the Ashwin Willemse walkout. The thesis explores and analyses the diverse racialised responses to the ‘Willemse walkout’ through race theories and ‘coloniality of being’. Qualitative research methods were used in the form of a reception analysis involving two racially homogenous (black and white) focus group interviews, two in-depth individual interviews with black research participants, three in-depth individual interviews with white research participants, and a sample of tweets from black and white commentators who had opinions about the ‘Willemse walkout’. The thesis concludes that most black research participants supported Willemse’s actions and most of the white people in the group disagreed with Willemse’s behaviour. Their various opinions were largely due to their different lived experiences which were a consequence of South Africa’s colonial history, apartheid, and racial discrimination. , Thesis (MA) -- Faculty of Humanities, School of Journalism and Media Studies, 2022
- Full Text:
- Date Issued: 2022-10-14
Rural Tourism and Inclusive Development in Port St. Johns - South Africa
- Acha-Anyi, Paul Nkemngu, Ndolose, Ludwe, Solomon, Khunou Pula
- Authors: Acha-Anyi, Paul Nkemngu , Ndolose, Ludwe , Solomon, Khunou Pula
- Date: 2021
- Subjects: Rural tourism Community Inclusive development; Sustainable development Article
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/7023 , vital:52758 , xlink:href=":https://doi.org/10.46222/ajhtl.19770720.197"
- Description: The purpose of this study was to explore ways of achieving an inclusive approach to tourism development in rural communities. Although tourism has generally been recommended as a means of orchestrating development in rural communities, achieving this laudable goal has often been illusive due to the fragmented approach adopted by tourism stakeholders. An exploratory quantitative research approach was adopted by using a structured survey instrument to generate 307 valid responses from community members in Port St. John in the Eastern Cape Province (ECP) of South Africa. Results obtained reveal similarities and some differences based on demographic characteristics with regards to the benefits of rural tourism to the community. Importantly, the study illuminates the fragmented way in which residents perceive tourism benefits, both from a gender perspective and personal benefit versus community dichotomy. The paper discusses policy as well as practical local economic development implications. Keywords: Rural tourism; community; Port St. Johns; inclusive development; sustainable development
- Full Text:
- Date Issued: 2021
- Authors: Acha-Anyi, Paul Nkemngu , Ndolose, Ludwe , Solomon, Khunou Pula
- Date: 2021
- Subjects: Rural tourism Community Inclusive development; Sustainable development Article
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/7023 , vital:52758 , xlink:href=":https://doi.org/10.46222/ajhtl.19770720.197"
- Description: The purpose of this study was to explore ways of achieving an inclusive approach to tourism development in rural communities. Although tourism has generally been recommended as a means of orchestrating development in rural communities, achieving this laudable goal has often been illusive due to the fragmented approach adopted by tourism stakeholders. An exploratory quantitative research approach was adopted by using a structured survey instrument to generate 307 valid responses from community members in Port St. John in the Eastern Cape Province (ECP) of South Africa. Results obtained reveal similarities and some differences based on demographic characteristics with regards to the benefits of rural tourism to the community. Importantly, the study illuminates the fragmented way in which residents perceive tourism benefits, both from a gender perspective and personal benefit versus community dichotomy. The paper discusses policy as well as practical local economic development implications. Keywords: Rural tourism; community; Port St. Johns; inclusive development; sustainable development
- Full Text:
- Date Issued: 2021
An Analysis of Employee Motivation in a Multinational Context in Sub Saharan Africa
- Acha-Anyi, Paul Nkemngu, Masaraure, Robson
- Authors: Acha-Anyi, Paul Nkemngu , Masaraure, Robson
- Date: 2021
- Subjects: Employee motivation Sub-Saharan Africa Article
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/7021 , vital:52757 , xlink:href=":https://doi.org/10.46222/ajhtl.19770720-119"
- Description: This study assesses motivational preferences of employees in a multinational context in Sub Saharan Africa. Using the Grundfos group operating sites in Ghana, Kenya and South Africa as a case study, the study explores quantitative data on possible differences in employee motivational factors based on selected variables such as location, length of service and managerial status. Questionnaires were employed in collecting data from 131 participants from the three locations of Grundfos Sub Saharan Africa (SSA). Results of the study reveal that the factor “equal treatment of employees” is considered most important among the respondents. It is also noted that there were no significant statistical differences among the participants based on the examined variables. Policy and practical implications of the findings of this study are discussed, particularly around the development and implementation of Human resources policies that address employee perceptions of equity. This study makes a contribution to existing literature on employee motivation in multinational settings. Keywords: Employee motivation, motivational factors, multinational context, Sub-Saharan Africa
- Full Text:
- Date Issued: 2021
- Authors: Acha-Anyi, Paul Nkemngu , Masaraure, Robson
- Date: 2021
- Subjects: Employee motivation Sub-Saharan Africa Article
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/11260/7021 , vital:52757 , xlink:href=":https://doi.org/10.46222/ajhtl.19770720-119"
- Description: This study assesses motivational preferences of employees in a multinational context in Sub Saharan Africa. Using the Grundfos group operating sites in Ghana, Kenya and South Africa as a case study, the study explores quantitative data on possible differences in employee motivational factors based on selected variables such as location, length of service and managerial status. Questionnaires were employed in collecting data from 131 participants from the three locations of Grundfos Sub Saharan Africa (SSA). Results of the study reveal that the factor “equal treatment of employees” is considered most important among the respondents. It is also noted that there were no significant statistical differences among the participants based on the examined variables. Policy and practical implications of the findings of this study are discussed, particularly around the development and implementation of Human resources policies that address employee perceptions of equity. This study makes a contribution to existing literature on employee motivation in multinational settings. Keywords: Employee motivation, motivational factors, multinational context, Sub-Saharan Africa
- Full Text:
- Date Issued: 2021
Graphene quantum dots functionalized with 4-amino-2, 2, 6, 6-tetramethylpiperidine-N-oxide as fluorescence “turn-on” nanosensors
- Achadu, Ojodomo J, Britton, Jonathan, Nyokong, Tebello
- Authors: Achadu, Ojodomo J , Britton, Jonathan , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/239854 , vital:50773 , xlink:href="https://doi.org/10.1007/s10895-016-1916-y"
- Description: In this study, we report on the fabrication of simple and rapid graphene quantum dots (GQDs)-based fluorescence “turn-ON” nanoprobes for sensitive and selective detection of ascorbic acid (AA). Pristine GQDs and S and N co-doped-GQDs (SN-GQDs) were functionalized with 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4-amino-TEMPO, a nitroxide free radical). The nitroxide free radicals efficiently quenched the fluorescence of the GQDs and upon interaction of the nanoconjugates with ascorbic acid, the quenched fluorescence was restored. The linear ranges recorded were 0.5–5.7 μM and 0.1–5.5 μM for GQDs-4-amino-TEMPO and SN-GQDs-4amino-TEMPO nanoprobes, respectively. Limits of detection were found to be 60 nM and 84 nM for SN-GQDS-4-amino-TEMPO and GQDs-4-amino-TEMPO for AA detection, respectively. This novel fluorescence “turn-ON” technique showed to be highly rapid and selective towards AA detection.
- Full Text:
- Date Issued: 2016
- Authors: Achadu, Ojodomo J , Britton, Jonathan , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/239854 , vital:50773 , xlink:href="https://doi.org/10.1007/s10895-016-1916-y"
- Description: In this study, we report on the fabrication of simple and rapid graphene quantum dots (GQDs)-based fluorescence “turn-ON” nanoprobes for sensitive and selective detection of ascorbic acid (AA). Pristine GQDs and S and N co-doped-GQDs (SN-GQDs) were functionalized with 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4-amino-TEMPO, a nitroxide free radical). The nitroxide free radicals efficiently quenched the fluorescence of the GQDs and upon interaction of the nanoconjugates with ascorbic acid, the quenched fluorescence was restored. The linear ranges recorded were 0.5–5.7 μM and 0.1–5.5 μM for GQDs-4-amino-TEMPO and SN-GQDs-4amino-TEMPO nanoprobes, respectively. Limits of detection were found to be 60 nM and 84 nM for SN-GQDS-4-amino-TEMPO and GQDs-4-amino-TEMPO for AA detection, respectively. This novel fluorescence “turn-ON” technique showed to be highly rapid and selective towards AA detection.
- Full Text:
- Date Issued: 2016
Fluorescence behaviour of supramolecular hybrids containing graphene quantum dots and pyrene-derivatized phthalocyanines and porphyrins
- Achadu, Ojodomo John, Managa, Muthumuni, Nyokong, Tebello
- Authors: Achadu, Ojodomo John , Managa, Muthumuni , Nyokong, Tebello
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188953 , vital:44801 , xlink:href="https://doi.org/10.1016/j.jphotochem.2016.10.029"
- Description: Novel pyrene-derivatized zinc and cobalt phthalocyanines (Pcs) and porphyrins (Ps) were immobilized on graphene quantum dots (GQDs) to form GQDs-Pcs and GQDs-Ps supramolecular hybrids via the π–π stacking interaction method. Spectroscopic evidence shows that the resultant hybrids were stable owing to the strong π–π stacking interaction between the GQDs and the respective Pcs and Ps, thus leading to the fabrication of interesting and functional supramolecular hybrids by taking advantage of the delocalized π electron systems of GQDs and the macrocycles. The conjugates showed increased fluorescence quantum yields for the Pcs/Ps, but decreased values for the GQDs in the conjugates. These novel hybrid materials could potentially be deployed for studies in both fundamental and applied perspectives due to the synergistic contributions resulting from the combination of their excellent electronic and optical properties.
- Full Text:
- Date Issued: 2017
- Authors: Achadu, Ojodomo John , Managa, Muthumuni , Nyokong, Tebello
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188953 , vital:44801 , xlink:href="https://doi.org/10.1016/j.jphotochem.2016.10.029"
- Description: Novel pyrene-derivatized zinc and cobalt phthalocyanines (Pcs) and porphyrins (Ps) were immobilized on graphene quantum dots (GQDs) to form GQDs-Pcs and GQDs-Ps supramolecular hybrids via the π–π stacking interaction method. Spectroscopic evidence shows that the resultant hybrids were stable owing to the strong π–π stacking interaction between the GQDs and the respective Pcs and Ps, thus leading to the fabrication of interesting and functional supramolecular hybrids by taking advantage of the delocalized π electron systems of GQDs and the macrocycles. The conjugates showed increased fluorescence quantum yields for the Pcs/Ps, but decreased values for the GQDs in the conjugates. These novel hybrid materials could potentially be deployed for studies in both fundamental and applied perspectives due to the synergistic contributions resulting from the combination of their excellent electronic and optical properties.
- Full Text:
- Date Issued: 2017
Interaction of graphene quantum dots with 4-acetamido-2, 2, 6, 6-tetramethylpiperidine-oxyl free radicals
- Achadu, Ojodomo John, Nyokong, Tebello
- Authors: Achadu, Ojodomo John , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189031 , vital:44810 , xlink:href="https://doi.org/10.1007/s10895-015-1712-0"
- Description: We report on the interaction of graphene quantum dots (GQDs) with 4-acetamido-2,2,6,6-tetramethylpiperidineoxyl (4-acetamido-TEMPO) free radicals. The GQDs were N and S, N doped. The fluorescence quantum yields were higher for the doped GQDs compared to the undoped. The interaction is assessed by spectrofluorimetric, steady state/time resolved fluorescence and electron paramagnetic resonance (EPR) techniques. Fluorescence quenching was observed upon the addition of 4-acetamido-TEMPO to the GQDs. Photoinduced electron transfer (PET) mechanism was suggested as the plausible mechanism involved in the fluorescence quenching in which 4-acetamido-TEMPO acted as the electron acceptor.
- Full Text:
- Date Issued: 2016
- Authors: Achadu, Ojodomo John , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189031 , vital:44810 , xlink:href="https://doi.org/10.1007/s10895-015-1712-0"
- Description: We report on the interaction of graphene quantum dots (GQDs) with 4-acetamido-2,2,6,6-tetramethylpiperidineoxyl (4-acetamido-TEMPO) free radicals. The GQDs were N and S, N doped. The fluorescence quantum yields were higher for the doped GQDs compared to the undoped. The interaction is assessed by spectrofluorimetric, steady state/time resolved fluorescence and electron paramagnetic resonance (EPR) techniques. Fluorescence quenching was observed upon the addition of 4-acetamido-TEMPO to the GQDs. Photoinduced electron transfer (PET) mechanism was suggested as the plausible mechanism involved in the fluorescence quenching in which 4-acetamido-TEMPO acted as the electron acceptor.
- Full Text:
- Date Issued: 2016
The interaction between graphene quantum dots grafted with polyethyleneimine and Au@ Ag nanoparticles
- Achadu, Ojodomo John, Uddin, Imran, Nyokong, Tebello
- Authors: Achadu, Ojodomo John , Uddin, Imran , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188679 , vital:44775 , xlink:href="https://doi.org/10.1016/j.jphotochem.2016.03.016"
- Description: Graphene quantum dots grafted with polyethyleneimine (GQDs-PEI) and Au@Ag core-shell nanoparticles blend was demonstrated to be a novel biosensing nanoprobe for the rapid and highly sensitive detection of biothiols such as cysteine (Cys), homocysteine (Hcys) and glutathione (GSH). The fluorescence emission of GQDs-PEI was quenched efficiently upon interaction with Au@Ag core-shell nanoparticles. The quenched fluorescence emission of the GQDs-PEI was restored in the presence of the biothiols. The fluorimetric sensing is based on the strong affinity between the mercapto (SH) groups of the biothiols and the Au@Ag core-shell nanoparticles by which the interaction between GQDs-PEI and Au@Ag core-shell nanoparticles was disrupted with a consequent modulation (‘turn-on’) of the quenched GQDs-PEI emission. Thus, a new, simple, rapid and highly sensitive fluorescence nanoprobe for detecting biothiols has been developed in this work.
- Full Text:
- Date Issued: 2016
- Authors: Achadu, Ojodomo John , Uddin, Imran , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188679 , vital:44775 , xlink:href="https://doi.org/10.1016/j.jphotochem.2016.03.016"
- Description: Graphene quantum dots grafted with polyethyleneimine (GQDs-PEI) and Au@Ag core-shell nanoparticles blend was demonstrated to be a novel biosensing nanoprobe for the rapid and highly sensitive detection of biothiols such as cysteine (Cys), homocysteine (Hcys) and glutathione (GSH). The fluorescence emission of GQDs-PEI was quenched efficiently upon interaction with Au@Ag core-shell nanoparticles. The quenched fluorescence emission of the GQDs-PEI was restored in the presence of the biothiols. The fluorimetric sensing is based on the strong affinity between the mercapto (SH) groups of the biothiols and the Au@Ag core-shell nanoparticles by which the interaction between GQDs-PEI and Au@Ag core-shell nanoparticles was disrupted with a consequent modulation (‘turn-on’) of the quenched GQDs-PEI emission. Thus, a new, simple, rapid and highly sensitive fluorescence nanoprobe for detecting biothiols has been developed in this work.
- Full Text:
- Date Issued: 2016