Thermal, spectroscopic and x-ray diffraction studies of copper(II) 1,2,4,5-Benzenetetracarboxylates and copper(II) oxalate a study of metal-organic frameworks
- Authors: Lamprecht, Emmanuel
- Date: 2008
- Subjects: Organometallic compounds Copper Oxalates -- Thermal properties Organic compounds -- Synthesis Spectrum analysis X-rays -- Diffraction
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4389 , http://hdl.handle.net/10962/d1005054
- Description: Novel and known metal organic frameworks with copper(II), sodium and 1,2,4,5-benzenetetracarboxylate were prepared by ambient precipitation, solvothermal and gel-synthesis methods, and characterized by single-crystal X-ray diffraction, X-ray powder diffraction, infrared spectroscopy, differential scanning calorimetry, and thermogravimetry with FTIR evolved-gas analysis. Some of these complexes were investigated for guest inclusion properties with water (the original guest species), methanol, ethanol and pyridine. The gel-synthesis products were the most interesting. The novel threedimensional metal-organic framework complex Cu₂ Na(OH)L·7H₂O (where L=1,2,4,5-benzenetetracarboxylate) -formed by gel-synthesis- is a covalent three-dimensional metal organic framework polymer with open channels containing both guest water molecules and water molecules coordinated to sodium. The structure collapsed on dehydration, but was essentially restored to the original structure on rehydration in moist air. On exposure of the dehydrated material to methanol and ethanol vapour, significant uptake of these solvents was observed, and the resolvated structures closely resembled that of the parent material. On heating in dry nitrogen, small amounts of methanol and ethanol remained until about 280 °C, when loss of the remaining guest triggered decomposition of the framework. The related complex, Cu₂¼(OH)½ L·7½H₂O (or possibly Cu₂⅓ (OH)⅔L·8H₂O) -formed by gel-synthesis- had a different physical appearance to Cu₂Na(OH)L·7H₂O above, but had nearly identical X-ray diffraction pattern, mid-infrared spectrum and thermal behaviour. The novel complex Cu₄Na₄L₃·14H₂O -formed by gel-synthesis- is a covalent three-dimensional metal-organic framework with small channels containing both guest water molecules and water coordinated to sodium and copper. Upon dehydration the structure collapsed, but on rehydration in moist air the original structure was partly restored. The dehydrated material did not absorb methanol. Known two-dimensional polymeric complexes [Cu₂L·6H₂O]·4H₂O and [Cu₂L·4H₂O]·2H₂O were also obtained by gel-synthesis, and were characterized and investigated for guest inclusion properties. The structures of these complexes collapsed on dehydration, and were only partly restored on rehydration in saturated water vapour. The dehydrated materials did not absorb methanol. The two-dimensional polymeric mixed-ligand complex Cu₂(pyridine)₄·6H₂O -formed very slowly by gel-synthesis- was characterized by TG-FTIR, and was shown to undergo a complicated decomposition involving the loss of water and pyridine, carbon dioxide and carbon monoxide in various stages. Solvothermal synthesis did not yield materials suitable for single-crystal X-ray diffraction studies or inclusion studies, producing only an anhydrous or hemihydrate complex with the formula Cu₂L·0.65H2O. Ambient precipitation syntheses did not yield materials suitable for singlecrystal diffraction studies, forming products approximately equivalent to the complexes [Cu₂L·6H₂O]·4H₂O and Cu₂¼(OH)½L·7 ½H₂O above. During the course of the above study it was discovered that, on changing the DSC purge from nitrogen to argon, the normally exothermic carboxylate decompositions appeared to become endothermic. The effects of the supposedly inert atmospheres of argon and nitrogen on the decomposition-mechanism of copper(II) oxalate -a well-studied copper carboxylate- were therefore studied by DSC, TG, TG-FTIR and XRPD. DSC experiments were performed in nitrogen and argon at different flow-rates, in various mixtures of nitrogen and argon, and at various heating rates. Regardless of the proportions of nitrogen and argon, the DSC residues consisted mainly of copper metal, a small amount of copper(I) oxide (cuprite) and, in some circumstances, traces of copper(II) oxide (tenorite). Also, regardless of whether TG-FTIR experiments were performed under argon or nitrogen, the gaseous decomposition products consisted mainly of carbon dioxide, with traces of carbon monoxide being detected over part of the decomposition period. Various explanations for the thermal behaviour are discussed, and it is possible that small amounts of O2 or monatomic oxygen were given off during the decomposition under argon. The design and implementation of a low-cost prototype X-ray proportional counter detector system, consisting of a hybrid analog-digital computer built using commonly available electronic components, is presented. This system was designed to replace ageing discrete-transistor designs still in use in earlier X-ray diffractometers. The prototype performs the functions of pulse-shaping, pulseheight discrimination, counting and scaling, and provides both digital and scaled analog outputs.
- Full Text:
- Date Issued: 2008
- Authors: Lamprecht, Emmanuel
- Date: 2008
- Subjects: Organometallic compounds Copper Oxalates -- Thermal properties Organic compounds -- Synthesis Spectrum analysis X-rays -- Diffraction
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4389 , http://hdl.handle.net/10962/d1005054
- Description: Novel and known metal organic frameworks with copper(II), sodium and 1,2,4,5-benzenetetracarboxylate were prepared by ambient precipitation, solvothermal and gel-synthesis methods, and characterized by single-crystal X-ray diffraction, X-ray powder diffraction, infrared spectroscopy, differential scanning calorimetry, and thermogravimetry with FTIR evolved-gas analysis. Some of these complexes were investigated for guest inclusion properties with water (the original guest species), methanol, ethanol and pyridine. The gel-synthesis products were the most interesting. The novel threedimensional metal-organic framework complex Cu₂ Na(OH)L·7H₂O (where L=1,2,4,5-benzenetetracarboxylate) -formed by gel-synthesis- is a covalent three-dimensional metal organic framework polymer with open channels containing both guest water molecules and water molecules coordinated to sodium. The structure collapsed on dehydration, but was essentially restored to the original structure on rehydration in moist air. On exposure of the dehydrated material to methanol and ethanol vapour, significant uptake of these solvents was observed, and the resolvated structures closely resembled that of the parent material. On heating in dry nitrogen, small amounts of methanol and ethanol remained until about 280 °C, when loss of the remaining guest triggered decomposition of the framework. The related complex, Cu₂¼(OH)½ L·7½H₂O (or possibly Cu₂⅓ (OH)⅔L·8H₂O) -formed by gel-synthesis- had a different physical appearance to Cu₂Na(OH)L·7H₂O above, but had nearly identical X-ray diffraction pattern, mid-infrared spectrum and thermal behaviour. The novel complex Cu₄Na₄L₃·14H₂O -formed by gel-synthesis- is a covalent three-dimensional metal-organic framework with small channels containing both guest water molecules and water coordinated to sodium and copper. Upon dehydration the structure collapsed, but on rehydration in moist air the original structure was partly restored. The dehydrated material did not absorb methanol. Known two-dimensional polymeric complexes [Cu₂L·6H₂O]·4H₂O and [Cu₂L·4H₂O]·2H₂O were also obtained by gel-synthesis, and were characterized and investigated for guest inclusion properties. The structures of these complexes collapsed on dehydration, and were only partly restored on rehydration in saturated water vapour. The dehydrated materials did not absorb methanol. The two-dimensional polymeric mixed-ligand complex Cu₂(pyridine)₄·6H₂O -formed very slowly by gel-synthesis- was characterized by TG-FTIR, and was shown to undergo a complicated decomposition involving the loss of water and pyridine, carbon dioxide and carbon monoxide in various stages. Solvothermal synthesis did not yield materials suitable for single-crystal X-ray diffraction studies or inclusion studies, producing only an anhydrous or hemihydrate complex with the formula Cu₂L·0.65H2O. Ambient precipitation syntheses did not yield materials suitable for singlecrystal diffraction studies, forming products approximately equivalent to the complexes [Cu₂L·6H₂O]·4H₂O and Cu₂¼(OH)½L·7 ½H₂O above. During the course of the above study it was discovered that, on changing the DSC purge from nitrogen to argon, the normally exothermic carboxylate decompositions appeared to become endothermic. The effects of the supposedly inert atmospheres of argon and nitrogen on the decomposition-mechanism of copper(II) oxalate -a well-studied copper carboxylate- were therefore studied by DSC, TG, TG-FTIR and XRPD. DSC experiments were performed in nitrogen and argon at different flow-rates, in various mixtures of nitrogen and argon, and at various heating rates. Regardless of the proportions of nitrogen and argon, the DSC residues consisted mainly of copper metal, a small amount of copper(I) oxide (cuprite) and, in some circumstances, traces of copper(II) oxide (tenorite). Also, regardless of whether TG-FTIR experiments were performed under argon or nitrogen, the gaseous decomposition products consisted mainly of carbon dioxide, with traces of carbon monoxide being detected over part of the decomposition period. Various explanations for the thermal behaviour are discussed, and it is possible that small amounts of O2 or monatomic oxygen were given off during the decomposition under argon. The design and implementation of a low-cost prototype X-ray proportional counter detector system, consisting of a hybrid analog-digital computer built using commonly available electronic components, is presented. This system was designed to replace ageing discrete-transistor designs still in use in earlier X-ray diffractometers. The prototype performs the functions of pulse-shaping, pulseheight discrimination, counting and scaling, and provides both digital and scaled analog outputs.
- Full Text:
- Date Issued: 2008
Thermal decomposition of mixed metal oxalates
- Authors: Coetzee, Anita
- Date: 1993
- Subjects: Oxalates -- Research , Decomposition (Chemistry)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4388 , http://hdl.handle.net/10962/d1005053 , Oxalates -- Research , Decomposition (Chemistry)
- Description: The mixed metal oxalates, FeCu(ox)₂.3H₂0, CoCu(ox)₂.3H₂0, and NiCu(ox)₂.3.5H₂0, [ox = C₂0₄] have been prepared by coprecipitation from solution. The thermal behaviour of these compounds in nitrogen and in oxygen has been examined using thermogravimetry (TG), thermomagnetometry (TM), differential scanning calorimetry (DSC) and evolved gas analysis (EGA), and results are compared with results obtained for Cuox and Mox.yH₂0. The thermal behaviour of the mixed oxalates, MCU(OX)₂.xH₂0, differed from that of the individual metal oxalates, Cuox, Coox.2H₂0, Niox.2H₂0 and Feox.2H₂0. All three mixed oxalates on heating in N₂, first dehydrate and then decompose in at least two overlapping endothermic stages. Both CO and CO₂ were evolved in proportions which varied with the surrounding atmosphere, and from compound to compound, and with extent of reaction of a given compound. The mixed oxalates, MCU(OX)₂.xH₂0, do not show the exothermic behaviour characteristic of Cuox, and reasons for this are discussed. Thermochemical calculations were done and the enthalpies of formation of the hydrates and dehydrated oxalates were determined. It was found that the enthalpy of mixing was very small or within experimental error. X-ray powder diffraction patterns for the individual and mixed oxalates were compared. The pattern for Cuox differs from the patterns obtained for the other oxalates, confirming suggestions that Cuox has a structure different to most other transition metal oxalates. The kinetics of dehydration and decomposition of the mixed oxalates were investigated, using isothermal and programmed temperature TG and DSC experiments. The yield and composition of evolved gases during isothermal decomposition were measured and compared with the enthalpy changes. X-ray photoelectron spectroscopy studies provided some information on the electron environment of the metal atoms in the various oxalates.
- Full Text:
- Date Issued: 1993
- Authors: Coetzee, Anita
- Date: 1993
- Subjects: Oxalates -- Research , Decomposition (Chemistry)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4388 , http://hdl.handle.net/10962/d1005053 , Oxalates -- Research , Decomposition (Chemistry)
- Description: The mixed metal oxalates, FeCu(ox)₂.3H₂0, CoCu(ox)₂.3H₂0, and NiCu(ox)₂.3.5H₂0, [ox = C₂0₄] have been prepared by coprecipitation from solution. The thermal behaviour of these compounds in nitrogen and in oxygen has been examined using thermogravimetry (TG), thermomagnetometry (TM), differential scanning calorimetry (DSC) and evolved gas analysis (EGA), and results are compared with results obtained for Cuox and Mox.yH₂0. The thermal behaviour of the mixed oxalates, MCU(OX)₂.xH₂0, differed from that of the individual metal oxalates, Cuox, Coox.2H₂0, Niox.2H₂0 and Feox.2H₂0. All three mixed oxalates on heating in N₂, first dehydrate and then decompose in at least two overlapping endothermic stages. Both CO and CO₂ were evolved in proportions which varied with the surrounding atmosphere, and from compound to compound, and with extent of reaction of a given compound. The mixed oxalates, MCU(OX)₂.xH₂0, do not show the exothermic behaviour characteristic of Cuox, and reasons for this are discussed. Thermochemical calculations were done and the enthalpies of formation of the hydrates and dehydrated oxalates were determined. It was found that the enthalpy of mixing was very small or within experimental error. X-ray powder diffraction patterns for the individual and mixed oxalates were compared. The pattern for Cuox differs from the patterns obtained for the other oxalates, confirming suggestions that Cuox has a structure different to most other transition metal oxalates. The kinetics of dehydration and decomposition of the mixed oxalates were investigated, using isothermal and programmed temperature TG and DSC experiments. The yield and composition of evolved gases during isothermal decomposition were measured and compared with the enthalpy changes. X-ray photoelectron spectroscopy studies provided some information on the electron environment of the metal atoms in the various oxalates.
- Full Text:
- Date Issued: 1993
Thermal decomposition of ammonium metavanadate
- Authors: Stewart, Brian Victor
- Date: 1972
- Subjects: Decomposition (Chemistry) , Solids -- Thermal properties , Ammonia
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4503 , http://hdl.handle.net/10962/d1013274
- Description: The isothermal, endothermic, stepwise decomposition of ammonium metavanadate (AMV) in inert (argon or nitrogen), oxidising (air or oxygen) and reducing (ammonia) atmospheres as well as under high vacuum (pressure < IOn bar) conditions has been investigated. The reverse reaction, the isothermal recombination of V₂ 0₅ with ammonia and water vapour has also been investigated. The decomposition and recombination reactions were followed by continuously recording the mass loss of the sample with time using a Cahn R.G. Automatic Electrobalance. This enabled small samples ( ~ lOmg) to be used and consequently any self cooling of the sample during the decomposition was minimized. The intermediates and final products formed have been characterized by chemical analysis, X-ray powder diffraction studies, infrared spectroscopy and the mass loss involved in their formation. The changes in the physical properties of the samples during decomposition and recombination have been investigated by surface area measurements (using the BET method and krypton adsorption) and eIectron microscopy. Values for the enthalpy changes involved in the decomposition have been obtained by differential scanning calorimetry. The stoichiometry of the isothermal decomposition of ammonium metavanadate, under the various conditions of surrounding atmosphere has been discussed. Except for the later stages of the decomposition in ammonia, the results correspond well to the gradual reduction of the ratio of "(NH₄)₂ 0" to "V₂0₅" units from the original 1:1 ratio in ammonium metavanadate to pure "V₂0₅" with ammonia and water being evolved throughout the decomposition in the mole ratio of 2:1. The final product of the decomposition in vacuum, argon and air is "V₂0₅" and in ammonia, below 360°, V0₂. The kinetic parameters for each of the stages of the decomposition of AMV in each of the atmospheres studied have been determined. The mechanism of the first stage of the decomposition under the different conditions of surrounding atmosphere has been discussed from both the kinetic and the thermodynamic points of view. The absolute reaction rate theory has been applied to the decomposition in inert atmospheres enabling the formulae of the activated complexes formed during each stage to be calculated. It has also been shown that the detailed atomic movements occurring during the first stage of the decomposition in ammonia can be predicted from a knowledge of the stoichiometry of the reaction and of the detailed crystal structures of the starting and product materials. The kinetics and mechanism of the recombination of "V₂0₅" with ammonia and water vapour to form AMV have also been discussed in detail.
- Full Text:
- Date Issued: 1972
- Authors: Stewart, Brian Victor
- Date: 1972
- Subjects: Decomposition (Chemistry) , Solids -- Thermal properties , Ammonia
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4503 , http://hdl.handle.net/10962/d1013274
- Description: The isothermal, endothermic, stepwise decomposition of ammonium metavanadate (AMV) in inert (argon or nitrogen), oxidising (air or oxygen) and reducing (ammonia) atmospheres as well as under high vacuum (pressure < IOn bar) conditions has been investigated. The reverse reaction, the isothermal recombination of V₂ 0₅ with ammonia and water vapour has also been investigated. The decomposition and recombination reactions were followed by continuously recording the mass loss of the sample with time using a Cahn R.G. Automatic Electrobalance. This enabled small samples ( ~ lOmg) to be used and consequently any self cooling of the sample during the decomposition was minimized. The intermediates and final products formed have been characterized by chemical analysis, X-ray powder diffraction studies, infrared spectroscopy and the mass loss involved in their formation. The changes in the physical properties of the samples during decomposition and recombination have been investigated by surface area measurements (using the BET method and krypton adsorption) and eIectron microscopy. Values for the enthalpy changes involved in the decomposition have been obtained by differential scanning calorimetry. The stoichiometry of the isothermal decomposition of ammonium metavanadate, under the various conditions of surrounding atmosphere has been discussed. Except for the later stages of the decomposition in ammonia, the results correspond well to the gradual reduction of the ratio of "(NH₄)₂ 0" to "V₂0₅" units from the original 1:1 ratio in ammonium metavanadate to pure "V₂0₅" with ammonia and water being evolved throughout the decomposition in the mole ratio of 2:1. The final product of the decomposition in vacuum, argon and air is "V₂0₅" and in ammonia, below 360°, V0₂. The kinetic parameters for each of the stages of the decomposition of AMV in each of the atmospheres studied have been determined. The mechanism of the first stage of the decomposition under the different conditions of surrounding atmosphere has been discussed from both the kinetic and the thermodynamic points of view. The absolute reaction rate theory has been applied to the decomposition in inert atmospheres enabling the formulae of the activated complexes formed during each stage to be calculated. It has also been shown that the detailed atomic movements occurring during the first stage of the decomposition in ammonia can be predicted from a knowledge of the stoichiometry of the reaction and of the detailed crystal structures of the starting and product materials. The kinetics and mechanism of the recombination of "V₂0₅" with ammonia and water vapour to form AMV have also been discussed in detail.
- Full Text:
- Date Issued: 1972
Thermal and photostability studies of triprolidine hydrochloride and its mixtures with cyclodextrin and glucose
- Authors: Ndlebe, Vuyelwa Jacqueline
- Date: 2004
- Subjects: Antihistamines , Glucose , Cyclodextrins
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4387 , http://hdl.handle.net/10962/d1005052 , Antihistamines , Glucose , Cyclodextrins
- Description: Triprolidine hydrochloride (C₁₉H₂₂N₂.HCl.H₂O) (TPH) is a well-known antihistamine drug. It melts between 118°C and 122°C and the amount of water present is 4.5 mass percent. TPH is reported as being photosensitive and must be stored in sealed, light-tight containers. The thermal stabilities of TPH and of 1:1 molar and 1:1 mass ratio physical mixtures of TPH with beta-cyclodextrin (BCD) and with glucose have been examined using DSC, TG and TG-FTIR, complemented by X-ray powder diffraction (XRD) and infrared spectroscopic (IR) studies. Thermal studies of the solid TPH/BCD mixtures indicated that interaction between the components occurs and it is possible that the TPH molecule may be least partially accommodated in the cavity of the BCD host molecule. XRD results support this indication of inclusion. The results for mixtures of TPH/glucose also suggest that there is interaction between the two components. The results of molecular modelling suggest that TPH is most likely to be accommodated in the BCD cavity as a neutral triprolidine molecule with the toluene portion of the molecule entering first. There is also an indication that the Z-isomer should be accommodated slightly more readily than the E-isomer. Photostability studies were done by irradiating thin layers of solid samples of TPH and its mixtures for various times at 40°C using an Atlas Sun test CPS lamp operating at 550 W h m⁻². An analytical method using HPLC was developed and validated to determine the amounts of any photodegradants. DSC, TG, FTIR, XRD and IR were also used examine the irradiated samples. XRD results showed that changes in the TPH crystal structure occurred during irradiation and that these changes increased with the time of irradiation. Irradiation for 20 hours with UV or exposure to sunlight showed the presence of degradants. The results obtained illustrate the general stability of TPH, especially in the solid state. Although the potential for isomerization to the pharmaceutically inactive Z-isomer exists, this transformation would require extreme light conditions. The study has also shown TPH to be compatible with both glucose and BCD, which are potential excipients both in solid and liquid dosage forms. The presents of these excipients in dosage forms will thus not adversely affect the stability and the therapeutic efficacy of TPH. . An analytical method using HPLC was developed and validated to determine the amounts of any photodegradants. DSC, TG, FTIR, XRD and IR were also used examine the irradiated samples. XRD results showed that changes in the TPH crystal structure occurred during irradiation and that these changes increased with the time of irradiation. Irradiation for 20 hours with UV or exposure to sunlight showed the presence of degradants.
- Full Text:
- Date Issued: 2004
- Authors: Ndlebe, Vuyelwa Jacqueline
- Date: 2004
- Subjects: Antihistamines , Glucose , Cyclodextrins
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4387 , http://hdl.handle.net/10962/d1005052 , Antihistamines , Glucose , Cyclodextrins
- Description: Triprolidine hydrochloride (C₁₉H₂₂N₂.HCl.H₂O) (TPH) is a well-known antihistamine drug. It melts between 118°C and 122°C and the amount of water present is 4.5 mass percent. TPH is reported as being photosensitive and must be stored in sealed, light-tight containers. The thermal stabilities of TPH and of 1:1 molar and 1:1 mass ratio physical mixtures of TPH with beta-cyclodextrin (BCD) and with glucose have been examined using DSC, TG and TG-FTIR, complemented by X-ray powder diffraction (XRD) and infrared spectroscopic (IR) studies. Thermal studies of the solid TPH/BCD mixtures indicated that interaction between the components occurs and it is possible that the TPH molecule may be least partially accommodated in the cavity of the BCD host molecule. XRD results support this indication of inclusion. The results for mixtures of TPH/glucose also suggest that there is interaction between the two components. The results of molecular modelling suggest that TPH is most likely to be accommodated in the BCD cavity as a neutral triprolidine molecule with the toluene portion of the molecule entering first. There is also an indication that the Z-isomer should be accommodated slightly more readily than the E-isomer. Photostability studies were done by irradiating thin layers of solid samples of TPH and its mixtures for various times at 40°C using an Atlas Sun test CPS lamp operating at 550 W h m⁻². An analytical method using HPLC was developed and validated to determine the amounts of any photodegradants. DSC, TG, FTIR, XRD and IR were also used examine the irradiated samples. XRD results showed that changes in the TPH crystal structure occurred during irradiation and that these changes increased with the time of irradiation. Irradiation for 20 hours with UV or exposure to sunlight showed the presence of degradants. The results obtained illustrate the general stability of TPH, especially in the solid state. Although the potential for isomerization to the pharmaceutically inactive Z-isomer exists, this transformation would require extreme light conditions. The study has also shown TPH to be compatible with both glucose and BCD, which are potential excipients both in solid and liquid dosage forms. The presents of these excipients in dosage forms will thus not adversely affect the stability and the therapeutic efficacy of TPH. . An analytical method using HPLC was developed and validated to determine the amounts of any photodegradants. DSC, TG, FTIR, XRD and IR were also used examine the irradiated samples. XRD results showed that changes in the TPH crystal structure occurred during irradiation and that these changes increased with the time of irradiation. Irradiation for 20 hours with UV or exposure to sunlight showed the presence of degradants.
- Full Text:
- Date Issued: 2004
Thermal and photostability studies of furosemide and its cyclodextrin mixtures
- Authors: Melane, Babalwa Blossom
- Date: 2002 , 2013-05-16
- Subjects: Furosemide , Furosemide -- Stability
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4440 , http://hdl.handle.net/10962/d1007625 , Furosemide , Furosemide -- Stability
- Description: Furosemide (Lasix®), abbreviated as FR and also known as frusemide, is a drug used for renal problems and treatment of cardiac edema. Various polymorphic forms of furosemide, dependent upon the method of preparation and thermal treatment, have been reported. The main thermal decomposition product of furosemide has been identified as saluamine. The dissolution properties of furosemide have also been reported to be improved by complexation with beta-cyclodextrin. Photostabilities of the different crystal forms have been studied. Differential scanning calorimetry (DSC) and thermogravimetry (TG) have been used to examine the thermal behaviour of furosemide itself and of its physical and kneaded mixtures with betacyclodextrin (BCD) and gamma-cyclodextrin (GCD). There is strong evidence from DSC that complex formation between FR and GCD occurs. This is supported by IR and XRD data. Decreases in the intensity and broadening of the characteristic carbonyl (1660 cm'l) and amine (1588 cm⁻¹) bands in the kneaded mixture, compared to the physical mixture, were observed with IR. X-ray diffraction results for the 1:3 molar ratio FR/GCD kneaded mixture showed a halo diffraction pattern characteristic. of an amorphous solid and did not resemble patterns from the drug, or the gamma, cyclodextrin, or the physical mixture. Photostability studies have been conducted on solid furosemide and its mixtures with GCD or BCD. An HPLC method was developed to determine the amount of drug remaining after exposure and the presence of any degradants. Results indicated that about 10% degradation of the drug occurred during exposure for 16 hours at 550 W/m², with the appearance of polar degradants. Although IR and DSC results for the 1:3 molar ratio FR/GCD kneaded mixture showed a probable strong interaction between FR and GCD, the photostability of FR was decreased. The 1 :3 molar ratio FR/BCD kneaded mixture showed less photo-degradation than the 1:3 molar ratio FR/GCD mixture under similar conditions, suggesting that inclusion of the drug molecule (FR) is different in the two cyclodextrins.
- Full Text:
- Date Issued: 2002
- Authors: Melane, Babalwa Blossom
- Date: 2002 , 2013-05-16
- Subjects: Furosemide , Furosemide -- Stability
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4440 , http://hdl.handle.net/10962/d1007625 , Furosemide , Furosemide -- Stability
- Description: Furosemide (Lasix®), abbreviated as FR and also known as frusemide, is a drug used for renal problems and treatment of cardiac edema. Various polymorphic forms of furosemide, dependent upon the method of preparation and thermal treatment, have been reported. The main thermal decomposition product of furosemide has been identified as saluamine. The dissolution properties of furosemide have also been reported to be improved by complexation with beta-cyclodextrin. Photostabilities of the different crystal forms have been studied. Differential scanning calorimetry (DSC) and thermogravimetry (TG) have been used to examine the thermal behaviour of furosemide itself and of its physical and kneaded mixtures with betacyclodextrin (BCD) and gamma-cyclodextrin (GCD). There is strong evidence from DSC that complex formation between FR and GCD occurs. This is supported by IR and XRD data. Decreases in the intensity and broadening of the characteristic carbonyl (1660 cm'l) and amine (1588 cm⁻¹) bands in the kneaded mixture, compared to the physical mixture, were observed with IR. X-ray diffraction results for the 1:3 molar ratio FR/GCD kneaded mixture showed a halo diffraction pattern characteristic. of an amorphous solid and did not resemble patterns from the drug, or the gamma, cyclodextrin, or the physical mixture. Photostability studies have been conducted on solid furosemide and its mixtures with GCD or BCD. An HPLC method was developed to determine the amount of drug remaining after exposure and the presence of any degradants. Results indicated that about 10% degradation of the drug occurred during exposure for 16 hours at 550 W/m², with the appearance of polar degradants. Although IR and DSC results for the 1:3 molar ratio FR/GCD kneaded mixture showed a probable strong interaction between FR and GCD, the photostability of FR was decreased. The 1 :3 molar ratio FR/BCD kneaded mixture showed less photo-degradation than the 1:3 molar ratio FR/GCD mixture under similar conditions, suggesting that inclusion of the drug molecule (FR) is different in the two cyclodextrins.
- Full Text:
- Date Issued: 2002
Theoretical aspects of the reaction of zirconium compunds and vegetable tannins with the chromium-collagen complex
- Williams-Wynn, David Ernest Arthur
- Authors: Williams-Wynn, David Ernest Arthur
- Date: 1969
- Subjects: Zirconium compounds , Collagen , Chromium compounds , Tannins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4512 , http://hdl.handle.net/10962/d1013455
- Description: Studies have been made of the reactions which take place when zirconium compounds and vegetable tannins react with chromium tanned leather, in order to elucidate the mechanisms of the reactions which occur on retannage. Statistical procedures have been used in all investigations because of the variable nature of the substrate, and computer techniques have been applied to the repetitive statistical computations. Although chromium and vegetable tannages are well understood, further information on the reaction of zirconium with collagen was necessary before attempting to interpret the results of the studies of combination tannages with chromium, and this has been obtained by a comparative study of the reactions of chromium and zirconium with modified collagen. It is concluded that the mechanism of the reaction of basic zirconium sulphate with collagen is multipoint attachment of the tanning material by residual valency forces, although charge effects with basic groups may be supplementary. Zirconyl chloride reacts with carboxyl groups but does not form satisfactory, stable cross-links with collagen. Further evidence for this theory was obtained from the investigation of the reaction of zirconium compounds with chromium tanned collagen. Zirconyl sulphate does not interfere with effective chromium tannage and therefore can have little affinity for the carboxyl groups on the protein, but it displaces chromium complexes loosely held by auxiliary valencies without reducing the shrinkage temperature of the chromium leather Zirconyl chloride, although only fixed to a limited extent, apparently forms co-ordination compounds with the carboxyl groups, disrupting the chromium tannage because there is an over-all loss of hydrothermal stability. There is no evidence that zirconium co-ordinates with, or releases acid from chromium-collagen complexes, since combination chromium/zirconium tanned leathers are stable on storage. Retannage of chromium tanned leather with vegetable tanning materials generally results in loss of strength and a product which tends to deteriorate on ageing. Lower initial strength is probably due to the increased avidity of chromium tanned pelt for vegetable tannins, resulting from the liberation of internally neutralised reactive sites which are not normally available in vegetable tannage, and from the co- ordination of vegetable tannins and non-tannins to the chromium complex with the displacement of sulphate radicals. From a study of the retannage of chromium tanned modified collagen, it appears that basic groups probably play an important part in the rapid absorption of vegetable tannin. These reactions result in overloading of the fibre and an increased number of cross-links, both of which tend to produce weak leather. Deterioration with age is primarily a hydrolytic degradation of the protein which is catalysed by acid liberated from the chromium complexes by the entry of vegetable tannins, those factors which favour the formation of acid causing greater and more rapid deterioration.
- Full Text:
- Date Issued: 1969
- Authors: Williams-Wynn, David Ernest Arthur
- Date: 1969
- Subjects: Zirconium compounds , Collagen , Chromium compounds , Tannins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4512 , http://hdl.handle.net/10962/d1013455
- Description: Studies have been made of the reactions which take place when zirconium compounds and vegetable tannins react with chromium tanned leather, in order to elucidate the mechanisms of the reactions which occur on retannage. Statistical procedures have been used in all investigations because of the variable nature of the substrate, and computer techniques have been applied to the repetitive statistical computations. Although chromium and vegetable tannages are well understood, further information on the reaction of zirconium with collagen was necessary before attempting to interpret the results of the studies of combination tannages with chromium, and this has been obtained by a comparative study of the reactions of chromium and zirconium with modified collagen. It is concluded that the mechanism of the reaction of basic zirconium sulphate with collagen is multipoint attachment of the tanning material by residual valency forces, although charge effects with basic groups may be supplementary. Zirconyl chloride reacts with carboxyl groups but does not form satisfactory, stable cross-links with collagen. Further evidence for this theory was obtained from the investigation of the reaction of zirconium compounds with chromium tanned collagen. Zirconyl sulphate does not interfere with effective chromium tannage and therefore can have little affinity for the carboxyl groups on the protein, but it displaces chromium complexes loosely held by auxiliary valencies without reducing the shrinkage temperature of the chromium leather Zirconyl chloride, although only fixed to a limited extent, apparently forms co-ordination compounds with the carboxyl groups, disrupting the chromium tannage because there is an over-all loss of hydrothermal stability. There is no evidence that zirconium co-ordinates with, or releases acid from chromium-collagen complexes, since combination chromium/zirconium tanned leathers are stable on storage. Retannage of chromium tanned leather with vegetable tanning materials generally results in loss of strength and a product which tends to deteriorate on ageing. Lower initial strength is probably due to the increased avidity of chromium tanned pelt for vegetable tannins, resulting from the liberation of internally neutralised reactive sites which are not normally available in vegetable tannage, and from the co- ordination of vegetable tannins and non-tannins to the chromium complex with the displacement of sulphate radicals. From a study of the retannage of chromium tanned modified collagen, it appears that basic groups probably play an important part in the rapid absorption of vegetable tannin. These reactions result in overloading of the fibre and an increased number of cross-links, both of which tend to produce weak leather. Deterioration with age is primarily a hydrolytic degradation of the protein which is catalysed by acid liberated from the chromium complexes by the entry of vegetable tannins, those factors which favour the formation of acid causing greater and more rapid deterioration.
- Full Text:
- Date Issued: 1969
The thermodynamics of solutions and binary liquid mixtures
- Authors: Mercer-Chalmers, June Dawn
- Date: 1993
- Subjects: Thermodynamics Liquids Solution (Chemistry)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4390 , http://hdl.handle.net/10962/d1005055
- Description: The thesis is presented in two parts. In part one, the excess thermodynamic properties have been determined for several binary liquid mixtures, with the aim of testing theories of liquid mixtures. The excess molar enthalpies, Hem, have been determined using an LKB flow microcalorimeter, and the excess molar volumes, Vem, have been determined using an Anton Paar densitometer. The HemS and VemS have been measured at 298.15 K for binary systems involving an alkanol (methanol, ethanol, I-propanol, 2-propanol) mixed with a hydrocarbon (l-hexene, I-heptene, l-octene, I-hexyne, I-heptyne, l-octyne, toluene, mesitylene, 0-, m-, or p-xylene, cyclopentane, cyclohexane, cycloheptane, cyclooctane, cyclodecane). The results show trends relating to the degree of unsaturation, or size, of component molecules as well as the position of the hydroxyl group on the alkanol. Measurements were also made on mixtures involving an (n-alkane + a pseudo-n-alkane) and ( a cYcloalkane + a pseudo-cycloalkane). Two theories of liquid mixtures were tested in this work. The first theory tested was the theory of Congruency. This theory was tested, by means of a null test, on a novel set of mixtures involving an n-alkane (hexane, heptane, octane, decane, dodecane) + a pseudo-nalkane,and mixtures of a cycloalkane (cyclopentane, cyclohexane, cycloheptane, cyclooctane)+ a pseudo-cycloalkane. Deviations from the theory was less than the experimental error for the (n-alkane + pseudo-n-alkane) mixtures. However, significant deviations were observed for the mixtures of (a cycloalkane + a pseudo-cycloalkane). The second theory tested was the Flory theory, which has been used to predict the excess molar enthalpies and excess molar volumes for the mixtures involving (a 1-alkene, or 1-alkyne, or methyl-substituted benzene) + an alkanol. The results show that the theory does not hold for hydrocarbon mixtures involving an alkanol. In the second part of this thesis, the partial molar volumes, at infinite dilution, of binary solution involving a solid solute (18-crown-6 ether, dibenzo-18-crown-6 ether, dicyclohexanov 18-crown-6 ether, 15-crown-5 ether, or cryptand-222) are determined in various solvents. The results were repeated with a view to determine the volume changes at infinite dilution upon complexation, ΔV∞ of the crown ether or cryptand with a metal halide salt, MX (NaCl, NaI, KCl, KI, CsCl, CsI). The ΔV∞ results were compared with results in the literature for cryptand-222 (c-222) and dibenzo-18-crown-6 ether (B₂CE6) complexed with MX, and the study was extended to include further MX complexes with c-222 and B₂CE6, as well as MX complexes with 15-crown-5 ether and dicyclohexano-18-crown-6 ether. ΔV∞ results were correlated with the Hepler prediction of the electrostriction solvent effect.
- Full Text:
- Date Issued: 1993
- Authors: Mercer-Chalmers, June Dawn
- Date: 1993
- Subjects: Thermodynamics Liquids Solution (Chemistry)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4390 , http://hdl.handle.net/10962/d1005055
- Description: The thesis is presented in two parts. In part one, the excess thermodynamic properties have been determined for several binary liquid mixtures, with the aim of testing theories of liquid mixtures. The excess molar enthalpies, Hem, have been determined using an LKB flow microcalorimeter, and the excess molar volumes, Vem, have been determined using an Anton Paar densitometer. The HemS and VemS have been measured at 298.15 K for binary systems involving an alkanol (methanol, ethanol, I-propanol, 2-propanol) mixed with a hydrocarbon (l-hexene, I-heptene, l-octene, I-hexyne, I-heptyne, l-octyne, toluene, mesitylene, 0-, m-, or p-xylene, cyclopentane, cyclohexane, cycloheptane, cyclooctane, cyclodecane). The results show trends relating to the degree of unsaturation, or size, of component molecules as well as the position of the hydroxyl group on the alkanol. Measurements were also made on mixtures involving an (n-alkane + a pseudo-n-alkane) and ( a cYcloalkane + a pseudo-cycloalkane). Two theories of liquid mixtures were tested in this work. The first theory tested was the theory of Congruency. This theory was tested, by means of a null test, on a novel set of mixtures involving an n-alkane (hexane, heptane, octane, decane, dodecane) + a pseudo-nalkane,and mixtures of a cycloalkane (cyclopentane, cyclohexane, cycloheptane, cyclooctane)+ a pseudo-cycloalkane. Deviations from the theory was less than the experimental error for the (n-alkane + pseudo-n-alkane) mixtures. However, significant deviations were observed for the mixtures of (a cycloalkane + a pseudo-cycloalkane). The second theory tested was the Flory theory, which has been used to predict the excess molar enthalpies and excess molar volumes for the mixtures involving (a 1-alkene, or 1-alkyne, or methyl-substituted benzene) + an alkanol. The results show that the theory does not hold for hydrocarbon mixtures involving an alkanol. In the second part of this thesis, the partial molar volumes, at infinite dilution, of binary solution involving a solid solute (18-crown-6 ether, dibenzo-18-crown-6 ether, dicyclohexanov 18-crown-6 ether, 15-crown-5 ether, or cryptand-222) are determined in various solvents. The results were repeated with a view to determine the volume changes at infinite dilution upon complexation, ΔV∞ of the crown ether or cryptand with a metal halide salt, MX (NaCl, NaI, KCl, KI, CsCl, CsI). The ΔV∞ results were compared with results in the literature for cryptand-222 (c-222) and dibenzo-18-crown-6 ether (B₂CE6) complexed with MX, and the study was extended to include further MX complexes with c-222 and B₂CE6, as well as MX complexes with 15-crown-5 ether and dicyclohexano-18-crown-6 ether. ΔV∞ results were correlated with the Hepler prediction of the electrostriction solvent effect.
- Full Text:
- Date Issued: 1993
The thermodynamics of binary liquid mixtures of compounds containing multiple bonds.
- Authors: Baxter, Rodney Charles
- Date: 1989
- Subjects: Solution (Chemistry)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4531 , http://hdl.handle.net/10962/d1016079
- Description: Excess thermodynamic properties have been determined for several binary liquid mixtures with the aim of testing various thermodynamic theories and postulates. Excess molar enthalpies, HEm, have been determined using an LKB flow microcalorimeter and excess molar volumes, VEm, have been determined using an Anton Paar vibrating tube densitometer. The activity coefficients at infinite dilution ƴ∞₁₃, have been determined using an atmospheric pressure gas-liquid chromatograph. The excess molar enthalpies and the excess molar volumes have been measured at 298.15 K for systems involving the bicyclic compounds decahydronaphthalene (decalin), 1,2,3,4-tetrahydronaphthalene (tetralin), bicyclohexyl, or cyclohexylbenzene mixed with 1- hexene, 1-hexyne, 1-heptene, 1-heptyne, cyclohexene, 1,3-cyclohexadiene, 1,4- cyclohexadiene, or benzene. These excess properties have also been measured for systems where the bicyclic compound has been replaced with benzene, cyclohexane or n-hexane. The results show defmite trends related to the size, shape, and the degree of unsaturation of the component molecules. The Flory theory has been used to predict excess molar enthalpies and excess molar volumes for {(a bicyclic compound or benzene or cyclohexane or n-hexane) +(an n-alkane or a 1-alkene or a 1-alkyne or a cycloalkane or cyclohexene or a cycloalkadiene or benzene)}. The one parameter equations offer reasonably good correlations between the predicted and the experimental results. More insight into the origins of the contnbutions to the excess thermodynamic properties for these systems has been gained by considering the approximate equations of Patterson and co-workers, which separate the interactional and the free volume contributions to the excess molar enthalpy and the excess molar volume. The one parameter equations have adequately rationalized a good deal of the observed behaviour for HEm and VEm. The theory of Liebermann and co-workers, which does not employ any adjustable parameters, has not been as successful at predicting the excess thermodynamic properties for the above systems. The activity coefficients at infinite dilution have been measured at 278.15 K, 288.15 K and 298.15 K for n-bexane, 1-bexene, 1-hexyne, n-heptane, 1-heptene, 1-heptyne, cyclohexane, cyclohexene, 1,3-cyclohexadiene, 1,4-cyclohexadiene, and benzene, in decalin, tetralin, bicyclohexyl, and cyclohexylbenzene. Solvent losses from the column have been accounted for by an extrapolation procedure. The activity coefficient results together with the HEm and VEm values have been used to calculate the partial molar excess thermodynamic properties of mixing at infinite dilution. The partial molar excess properties at infinite dilution for decalin mixtures are similar to those for bicyclohexyl mixtures. There is also a similarity between the properties of the tetralin mixtures and the cyclohexylbenzene mixtures. The cycloalkadienes, benzene and the 1-alkynes exhibit a strong dissociation effect on being mixed with the saturated solvents, decalin and bicyclohexyl, but associate strongly with tetralin and with cyclohexylbenzene. The Flory theory bas been used to predict activity coefficients at infinite dilution from the experimentally determined HEm results for { (n-bexane or 1-hexene or 1-hexyne or naheptane or 1-heptene or 1-beptyne) + (a bicyclic compound)}. The theory is much better at predicting values for mixtures where both components are either saturated molecules or are unsaturated molecules than for {saturated + unsaturated} mixtures.
- Full Text:
- Date Issued: 1989
- Authors: Baxter, Rodney Charles
- Date: 1989
- Subjects: Solution (Chemistry)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4531 , http://hdl.handle.net/10962/d1016079
- Description: Excess thermodynamic properties have been determined for several binary liquid mixtures with the aim of testing various thermodynamic theories and postulates. Excess molar enthalpies, HEm, have been determined using an LKB flow microcalorimeter and excess molar volumes, VEm, have been determined using an Anton Paar vibrating tube densitometer. The activity coefficients at infinite dilution ƴ∞₁₃, have been determined using an atmospheric pressure gas-liquid chromatograph. The excess molar enthalpies and the excess molar volumes have been measured at 298.15 K for systems involving the bicyclic compounds decahydronaphthalene (decalin), 1,2,3,4-tetrahydronaphthalene (tetralin), bicyclohexyl, or cyclohexylbenzene mixed with 1- hexene, 1-hexyne, 1-heptene, 1-heptyne, cyclohexene, 1,3-cyclohexadiene, 1,4- cyclohexadiene, or benzene. These excess properties have also been measured for systems where the bicyclic compound has been replaced with benzene, cyclohexane or n-hexane. The results show defmite trends related to the size, shape, and the degree of unsaturation of the component molecules. The Flory theory has been used to predict excess molar enthalpies and excess molar volumes for {(a bicyclic compound or benzene or cyclohexane or n-hexane) +(an n-alkane or a 1-alkene or a 1-alkyne or a cycloalkane or cyclohexene or a cycloalkadiene or benzene)}. The one parameter equations offer reasonably good correlations between the predicted and the experimental results. More insight into the origins of the contnbutions to the excess thermodynamic properties for these systems has been gained by considering the approximate equations of Patterson and co-workers, which separate the interactional and the free volume contributions to the excess molar enthalpy and the excess molar volume. The one parameter equations have adequately rationalized a good deal of the observed behaviour for HEm and VEm. The theory of Liebermann and co-workers, which does not employ any adjustable parameters, has not been as successful at predicting the excess thermodynamic properties for the above systems. The activity coefficients at infinite dilution have been measured at 278.15 K, 288.15 K and 298.15 K for n-bexane, 1-bexene, 1-hexyne, n-heptane, 1-heptene, 1-heptyne, cyclohexane, cyclohexene, 1,3-cyclohexadiene, 1,4-cyclohexadiene, and benzene, in decalin, tetralin, bicyclohexyl, and cyclohexylbenzene. Solvent losses from the column have been accounted for by an extrapolation procedure. The activity coefficient results together with the HEm and VEm values have been used to calculate the partial molar excess thermodynamic properties of mixing at infinite dilution. The partial molar excess properties at infinite dilution for decalin mixtures are similar to those for bicyclohexyl mixtures. There is also a similarity between the properties of the tetralin mixtures and the cyclohexylbenzene mixtures. The cycloalkadienes, benzene and the 1-alkynes exhibit a strong dissociation effect on being mixed with the saturated solvents, decalin and bicyclohexyl, but associate strongly with tetralin and with cyclohexylbenzene. The Flory theory bas been used to predict activity coefficients at infinite dilution from the experimentally determined HEm results for { (n-bexane or 1-hexene or 1-hexyne or naheptane or 1-heptene or 1-beptyne) + (a bicyclic compound)}. The theory is much better at predicting values for mixtures where both components are either saturated molecules or are unsaturated molecules than for {saturated + unsaturated} mixtures.
- Full Text:
- Date Issued: 1989
The thermodynamics of binary liquid mixtures
- Scoones, Brett Warren Hamilton
- Authors: Scoones, Brett Warren Hamilton
- Date: 1983 , 2013-03-15
- Subjects: Thermodynamics , Thermodynamics -- Tables , Solution (Chemistry) , Liquids
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4392 , http://hdl.handle.net/10962/d1005893 , Thermodynamics , Thermodynamics -- Tables , Solution (Chemistry) , Liquids
- Description: A systematic study of the excess thermodynamic properties of two-ring compounds and n-alkanes was conducted. The excess enthalpies were determined at 288,15 K and 298,15 K by using a flow microcalorimetric technique. The excess volumes of tetralin and cycloalkanes, and tetralin and --alkans at 288,15 K and 298,15 K were determined by using a vibrating tube densitometer. The results showed trends relating to the size and shape of the n-alkane and cycloalkan molecules. The theory developed by Flory was applied to the decalin + cycloalkane and + n-alkane systems and this gave qualitative predictions of the excess enthalpies from the excess volumes and vice versa. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1983
- Authors: Scoones, Brett Warren Hamilton
- Date: 1983 , 2013-03-15
- Subjects: Thermodynamics , Thermodynamics -- Tables , Solution (Chemistry) , Liquids
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4392 , http://hdl.handle.net/10962/d1005893 , Thermodynamics , Thermodynamics -- Tables , Solution (Chemistry) , Liquids
- Description: A systematic study of the excess thermodynamic properties of two-ring compounds and n-alkanes was conducted. The excess enthalpies were determined at 288,15 K and 298,15 K by using a flow microcalorimetric technique. The excess volumes of tetralin and cycloalkanes, and tetralin and --alkans at 288,15 K and 298,15 K were determined by using a vibrating tube densitometer. The results showed trends relating to the size and shape of the n-alkane and cycloalkan molecules. The theory developed by Flory was applied to the decalin + cycloalkane and + n-alkane systems and this gave qualitative predictions of the excess enthalpies from the excess volumes and vice versa. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1983
The thermal decomposition of silver oxide
- Authors: Herley, Patrick James
- Date: 1960
- Subjects: Silver oxide -- Thermal properties , Decomposition (Chemistry)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4525 , http://hdl.handle.net/10962/d1015017
- Description: [From Introduction]. The thermal decomposition of solids is characterized by the formation and growth of nuclei at sites on the surface of the solid or within the crystal lattice. Such nuclear formation is favoured by disorganisation of the crystal either by mechanical damage, or by the presence of impurities. Disorganisation results in positions which have a high thermodynamic instability. The nuclei are likely to be formed initially at the corners and the edges of the crystal since these are more prone to damage. Careful handling and storage in vacuo often leads to a large reduction in their number, while deliberate scratching of the surface facilitates their production. The number of potential sites for nuclear formation is also increased by pre-irradiation with ultra-violet light, though there are indications that a different type of nucleus may be produced. Nucleation can be facilitated by pre-irradiation with electrons, neutrons, X-rays, gamma-rays and atomic particles. The nature of the nuclei is not always clearly defined, but it is generally accepted that they are composed of solid reaction products e.g. in the decomposition of barium azide and silver oxalate, nuclei of metallic barium and silver, respectively, are formed.
- Full Text:
- Date Issued: 1960
- Authors: Herley, Patrick James
- Date: 1960
- Subjects: Silver oxide -- Thermal properties , Decomposition (Chemistry)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4525 , http://hdl.handle.net/10962/d1015017
- Description: [From Introduction]. The thermal decomposition of solids is characterized by the formation and growth of nuclei at sites on the surface of the solid or within the crystal lattice. Such nuclear formation is favoured by disorganisation of the crystal either by mechanical damage, or by the presence of impurities. Disorganisation results in positions which have a high thermodynamic instability. The nuclei are likely to be formed initially at the corners and the edges of the crystal since these are more prone to damage. Careful handling and storage in vacuo often leads to a large reduction in their number, while deliberate scratching of the surface facilitates their production. The number of potential sites for nuclear formation is also increased by pre-irradiation with ultra-violet light, though there are indications that a different type of nucleus may be produced. Nucleation can be facilitated by pre-irradiation with electrons, neutrons, X-rays, gamma-rays and atomic particles. The nature of the nuclei is not always clearly defined, but it is generally accepted that they are composed of solid reaction products e.g. in the decomposition of barium azide and silver oxalate, nuclei of metallic barium and silver, respectively, are formed.
- Full Text:
- Date Issued: 1960
The thermal decomposition of mercuric oxalate and inorganic azides
- Authors: Moore, D J
- Date: 1966
- Subjects: Decomposition (Chemistry) , Oxalates -- Thermal properties , Mercuric Oxide -- Azides
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4483 , http://hdl.handle.net/10962/d1012878
- Description: The chemical reactivity of a solid is influenced to a marked degree by the presence of imperfections or defects in the solid. Bond strengths are considerably weaker at points of imperfection than elsewhere in the solid, and hence the initiation of reaction is favoured at these sites due to the relative ease of bond rupture. Line defects, such as edge or screw dislocations, jogs, Smekul cracks etc, are of prime importance in such changes. The surface of a solid or in intergranular boundaries, where a state of strain exists, are also favourable places for the initiation of a reaction, Point defects e.g. vacancies or interstitialions or atoms also play important roles in chemical change, often in conjuction with line defects.
- Full Text:
- Date Issued: 1966
- Authors: Moore, D J
- Date: 1966
- Subjects: Decomposition (Chemistry) , Oxalates -- Thermal properties , Mercuric Oxide -- Azides
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4483 , http://hdl.handle.net/10962/d1012878
- Description: The chemical reactivity of a solid is influenced to a marked degree by the presence of imperfections or defects in the solid. Bond strengths are considerably weaker at points of imperfection than elsewhere in the solid, and hence the initiation of reaction is favoured at these sites due to the relative ease of bond rupture. Line defects, such as edge or screw dislocations, jogs, Smekul cracks etc, are of prime importance in such changes. The surface of a solid or in intergranular boundaries, where a state of strain exists, are also favourable places for the initiation of a reaction, Point defects e.g. vacancies or interstitialions or atoms also play important roles in chemical change, often in conjuction with line defects.
- Full Text:
- Date Issued: 1966
The thermal decomposition of irradiated silver permanganate
- Authors: Sole, Michael John
- Date: 1959
- Subjects: Decomposition (Chemistry) , Irradiation , Permanganates , Silver compounds , Metals -- Thermal properties
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4502 , http://hdl.handle.net/10962/d1013265
- Description: The thermal decomposition of silver permanganate, pre-irradiated in BEPO and in a ⁶°C₀ Ϫ 'hot spot' has been investigated in the temperature range 100 - 125°C. The results are similar to those for irradiated KMn0₄ and the mechanism proposed for the latter is again suggested. The activation energy for the migration of point defects over the induction period is 1.03 ev. The decompositions of unirradiated and irradiated crystals differ in that the latter undergo physical disintegration over the acceleratory period. X-ray studies immediately prior to disintegration show strain and fragmentation in the irradiated crystal. An explanation involving the annealing of point defects at dislocation is advanced to explain the changes produced in the p/t plots with increased dosage, and fixed decomposition temperature. Summary, p. 94.
- Full Text:
- Date Issued: 1959
- Authors: Sole, Michael John
- Date: 1959
- Subjects: Decomposition (Chemistry) , Irradiation , Permanganates , Silver compounds , Metals -- Thermal properties
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4502 , http://hdl.handle.net/10962/d1013265
- Description: The thermal decomposition of silver permanganate, pre-irradiated in BEPO and in a ⁶°C₀ Ϫ 'hot spot' has been investigated in the temperature range 100 - 125°C. The results are similar to those for irradiated KMn0₄ and the mechanism proposed for the latter is again suggested. The activation energy for the migration of point defects over the induction period is 1.03 ev. The decompositions of unirradiated and irradiated crystals differ in that the latter undergo physical disintegration over the acceleratory period. X-ray studies immediately prior to disintegration show strain and fragmentation in the irradiated crystal. An explanation involving the annealing of point defects at dislocation is advanced to explain the changes produced in the p/t plots with increased dosage, and fixed decomposition temperature. Summary, p. 94.
- Full Text:
- Date Issued: 1959
The systematic assembly of prostate specific antigen electrochemical sensors based on asymmetric Co(II) phthalocyanines, graphitic quantum dots and an aptamer
- Authors: Nxele, Siphesihle Robin
- Date: 2022-04-08
- Subjects: Prostate-specific antigen , Electrochemical sensors , Phthalocyanines , Quantum dots , Co(II) phthalocyanines , Aptamer
- Language: English
- Type: Doctoral thesis , text
- Identifier: http://hdl.handle.net/10962/232893 , vital:50035 , DOI 10.21504/10962/232893
- Description: The need for low-cost, efficient and simple diagnostic tools has led to more research going into this subject, with the aim of making such medical devices more accessible where they are needed. This has led to more researchers developing point-of-care devices for this purpose worldwide, by sensor fabrication. This thesis focuses on electrochemical sensor development for the early diagnosis of prostate cancer. It is common knowledge that prostate cancer is one of the most prevalent carcinomas that have claimed lives due to late diagnosis where even the most invasive treatments have failed. For this reason, development of early detection devices that can even be used in the comfort of home is necessary and quite crucial. Electrochemical sensors have gained much attention due to their ease of fabrication, cost effectiveness, simplicity, ease of use and high efficiency. Using nanocomposites as modifiers has also become popular as they provide greater stability and improve detection limits when used together with biomolecules. With that said, the work reported herein has combined nanocomposites of graphenebased quantum dots, gold nanoparticles, phthalocyanines and an aptamer in order to fabricate aptasensors for the electrochemical detection of prostate cancer biomarker. The aptamer is specifically designed to bind to the biomarker, and the nanocomposites are expected to enhance current output thus lowering detection limits and increasing stability and efficiency. Reproducible results are also expected. Prior to the detection of the prostate cancer biomarker, the quantum dots-phthalocyanine nanohybrids were used to detect L-cysteine, which is an amino acid, in order to verify the synergistic effects as electrode modifiers that lead to the enhancement of current output. This increase in current output is then v exploited for the improvement of aptasensor functionality upon incorporation of the aptamer, for the detection of prostate specific antigen. The research in this thesis has been carried out with the intention of contributing to the world of medical research, more so because of the ever-increasing need for medical care to become accessible to all and not only to those who can afford expensive technologies and treatments. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-04-08
- Authors: Nxele, Siphesihle Robin
- Date: 2022-04-08
- Subjects: Prostate-specific antigen , Electrochemical sensors , Phthalocyanines , Quantum dots , Co(II) phthalocyanines , Aptamer
- Language: English
- Type: Doctoral thesis , text
- Identifier: http://hdl.handle.net/10962/232893 , vital:50035 , DOI 10.21504/10962/232893
- Description: The need for low-cost, efficient and simple diagnostic tools has led to more research going into this subject, with the aim of making such medical devices more accessible where they are needed. This has led to more researchers developing point-of-care devices for this purpose worldwide, by sensor fabrication. This thesis focuses on electrochemical sensor development for the early diagnosis of prostate cancer. It is common knowledge that prostate cancer is one of the most prevalent carcinomas that have claimed lives due to late diagnosis where even the most invasive treatments have failed. For this reason, development of early detection devices that can even be used in the comfort of home is necessary and quite crucial. Electrochemical sensors have gained much attention due to their ease of fabrication, cost effectiveness, simplicity, ease of use and high efficiency. Using nanocomposites as modifiers has also become popular as they provide greater stability and improve detection limits when used together with biomolecules. With that said, the work reported herein has combined nanocomposites of graphenebased quantum dots, gold nanoparticles, phthalocyanines and an aptamer in order to fabricate aptasensors for the electrochemical detection of prostate cancer biomarker. The aptamer is specifically designed to bind to the biomarker, and the nanocomposites are expected to enhance current output thus lowering detection limits and increasing stability and efficiency. Reproducible results are also expected. Prior to the detection of the prostate cancer biomarker, the quantum dots-phthalocyanine nanohybrids were used to detect L-cysteine, which is an amino acid, in order to verify the synergistic effects as electrode modifiers that lead to the enhancement of current output. This increase in current output is then v exploited for the improvement of aptasensor functionality upon incorporation of the aptamer, for the detection of prostate specific antigen. The research in this thesis has been carried out with the intention of contributing to the world of medical research, more so because of the ever-increasing need for medical care to become accessible to all and not only to those who can afford expensive technologies and treatments. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-04-08
The synthesis of α-alkoxy and α-aminostannanes as precursors to Novel Chromium Fischer Carbenes
- Authors: Meyer, Annalene
- Date: 2012
- Subjects: Alkoxides , Organometallic compounds , Carbenes (Methylene compounds) , Chromium , Molybdenum , Tungsten , Organolithium compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4371 , http://hdl.handle.net/10962/d1005036 , Alkoxides , Organometallic compounds , Carbenes (Methylene compounds) , Chromium , Molybdenum , Tungsten , Organolithium compounds
- Description: The present study involves the use of main group organometallics: organostannanes and organolithiums as precursors to chromium Fischer carbene complexes. Fischer carbenes are well stabilized by the π‐donor substituents such as alkoxy and amino groups and low oxidation state metals such as Group 6 (Chromium, Molybdenum or Tungsten). Carbenes are an important intermediate in the synthesis of a range of compounds through cyclopropanations, insertions, coupling and photochemical reactions. Synthesis and successful characterisation of three α‐alkoxystannanes was achieved via nucleophilic addition of tributylstannyllithium to the respective aldehydes, followed by an immediate MOM protection of the resulting alcohol. Six α‐aminostanannes were synthesised, consisting of N‐BOC, N‐acetyl and N‐ethyl derivatives of pyrrolidine and piperidine, via α‐lithiation and subsequent tinlithium transmetallation in the presence of TMEDA. The ¹³C NMR analysis highlighted an interesting phenomenon of tin‐carbon coupling that revealed unique structural information of both types of stannanes. DFT analysis was completed on the series of stannanes; a predicted frequency analysis was obtained which complemented the experimental Infra‐red data in elucidation of the compounds. The α‐alkoxy and α‐aminostannanes provided stable precursors to the organolithiums required for the synthesis of the novel Fischer chromium carbenes. The organolithiums were obtained via tinlithium exchange at low temperatures, followed by the addition of chromium hexacarbonyl to form the acylpentacarbonyl‐chromate salt. Alkylation of this intermediate using a Meerwein salt, Me₃OBF₄, gave rise to the novel Fischer chromium carbene complexes. Fischer chromium carbenes derived from the two isomeric butyl and isobutyl stannanes and the two N‐ethyl α‐aminostannanes were successfully synthesised. The difficulty encountered in the purification of the Fischer carbene complexes hindered the full characterisation, due to the presence of a by‐product, tetrabutyltin.
- Full Text:
- Date Issued: 2012
- Authors: Meyer, Annalene
- Date: 2012
- Subjects: Alkoxides , Organometallic compounds , Carbenes (Methylene compounds) , Chromium , Molybdenum , Tungsten , Organolithium compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4371 , http://hdl.handle.net/10962/d1005036 , Alkoxides , Organometallic compounds , Carbenes (Methylene compounds) , Chromium , Molybdenum , Tungsten , Organolithium compounds
- Description: The present study involves the use of main group organometallics: organostannanes and organolithiums as precursors to chromium Fischer carbene complexes. Fischer carbenes are well stabilized by the π‐donor substituents such as alkoxy and amino groups and low oxidation state metals such as Group 6 (Chromium, Molybdenum or Tungsten). Carbenes are an important intermediate in the synthesis of a range of compounds through cyclopropanations, insertions, coupling and photochemical reactions. Synthesis and successful characterisation of three α‐alkoxystannanes was achieved via nucleophilic addition of tributylstannyllithium to the respective aldehydes, followed by an immediate MOM protection of the resulting alcohol. Six α‐aminostanannes were synthesised, consisting of N‐BOC, N‐acetyl and N‐ethyl derivatives of pyrrolidine and piperidine, via α‐lithiation and subsequent tinlithium transmetallation in the presence of TMEDA. The ¹³C NMR analysis highlighted an interesting phenomenon of tin‐carbon coupling that revealed unique structural information of both types of stannanes. DFT analysis was completed on the series of stannanes; a predicted frequency analysis was obtained which complemented the experimental Infra‐red data in elucidation of the compounds. The α‐alkoxy and α‐aminostannanes provided stable precursors to the organolithiums required for the synthesis of the novel Fischer chromium carbenes. The organolithiums were obtained via tinlithium exchange at low temperatures, followed by the addition of chromium hexacarbonyl to form the acylpentacarbonyl‐chromate salt. Alkylation of this intermediate using a Meerwein salt, Me₃OBF₄, gave rise to the novel Fischer chromium carbene complexes. Fischer chromium carbenes derived from the two isomeric butyl and isobutyl stannanes and the two N‐ethyl α‐aminostannanes were successfully synthesised. The difficulty encountered in the purification of the Fischer carbene complexes hindered the full characterisation, due to the presence of a by‐product, tetrabutyltin.
- Full Text:
- Date Issued: 2012
The synthesis and properties of some polymer hydrogels
- Authors: Hird, Bryn
- Date: 1984 , 2013-04-05
- Subjects: Colloids
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4428 , http://hdl.handle.net/10962/d1006975 , Colloids
- Description: The interactions between water molecules and polyelectrolyte species in aqueous solutions are reviewed and are used to infer interactions occuring in swollen crosslinked polyelectrolyte hydrogels. Linear poly(acrylic acid ) and derivatives neutralised to varying degrees with alkali-metal hydroxides are prepared and characterised. Samples of these compounds are crosslinked by 'Y - irradiation to form hydrogels. Hydration studies on linear polymers, crosslinked material and a commercial polyacrylate hydrogel indicate a possible hydration structure and provide some insight into the nature of water-polymer interactions within a sHollen polyacrylate gel. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1984
- Authors: Hird, Bryn
- Date: 1984 , 2013-04-05
- Subjects: Colloids
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4428 , http://hdl.handle.net/10962/d1006975 , Colloids
- Description: The interactions between water molecules and polyelectrolyte species in aqueous solutions are reviewed and are used to infer interactions occuring in swollen crosslinked polyelectrolyte hydrogels. Linear poly(acrylic acid ) and derivatives neutralised to varying degrees with alkali-metal hydroxides are prepared and characterised. Samples of these compounds are crosslinked by 'Y - irradiation to form hydrogels. Hydration studies on linear polymers, crosslinked material and a commercial polyacrylate hydrogel indicate a possible hydration structure and provide some insight into the nature of water-polymer interactions within a sHollen polyacrylate gel. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1984
The synthesis and characterisation of Sn(IV) porphyrin derivatives and their potential application in anti-cancer and antimicrobial photodynamic therapy
- Authors: Dingiswayo, Somila
- Date: 2021-10
- Subjects: Porphyrins , Photochemotherapy , Cancer Photochemotherapy , Active oxygen Physiological effect , Aromaticity (Chemistry) , Tetrapyrroles , Magnetic circular dichroism , Corroles , Chlorins , Photodynamic antimicrobial chemotherapy (PACT)
- Language: English
- Type: Masters theses , text
- Identifier: http://hdl.handle.net/10962/188843 , vital:44791
- Description: In photodynamic therapy (PDT), the activation of light-sensitive drugs in tumour cells produces reactive singlet oxygen species, which cause tumour destruction through a cascade of biochemical reactions. Over the years, the wavelength of activation has been shown to be a critical factor in the penetration of light. Hence the properties of photosensitiser dyes in this context shape their ability to treat deep-seated tumours. In this study, the synthesis, structural characterisation and photophysicochemical properties of a series of Sn(IV) porphyrins with meso-methylthiophenyl rings that have been prepared to study their PDT and photodynamic antimicrobial chemotherapy (PACT) activity properties are reported. The series of Sn(IV) complexes is comprised of a porphyrin (1-Sn), a corrole (2-Sn), a chlorin (3-Sn) and an N-confused porphyrin (4-Sn). Herein, the low symmetry Sn(IV) porphyrin derivatives are shown to have excellent singlet oxygen generation capabilities, and lifetimes of the triplet excited states were in the microsecond range. For example, 4-Sn had a singlet oxygen quantum yield (ФΔ) and an excited triplet state lifetime (τT) of 0.88 and 27 μs, respectively. The complexes were studied using UV-visible and magnetic circular dichroism (MCD) spectroscopies. Interestingly, the positive-to-negative sign sequences of the Faraday B0 terms of 2-Sn and 3-Sn reveal that the structural modifications involved break the degeneracy of the MOs derived from the 1eg* LUMO of the porphyrin 1-Sn. In contrast, a conventional negative-to-positive sign sequence is observed for 4-Sn, since the confusion of a pyrrole moiety also results in a large separation of the 1a1u and 1a2u MOs of the porphyrin 1-Sn that are derived from the HOMO of a C16H162−parent hydrocarbon perimeter. The trends in the electronic structures of the Sn(IV) complexes were further investigated through a series of time-dependent density functional theory calculations, so that the suitability of the different types of complex for use in singlet oxygen applications could be further explored. During in vitro photodynamic antimicrobial chemotherapy (PACT) studies, chlorin derivative 3-Sn had the highest activity towards S. aureus and E. coli with log10 reductions of 10.5 and 8.74, respectively. The unusually high activity of 3-Sn against E.coli suggests that the interaction of neutral photosensitisers with gram-negativebacteria is more complex than previously understood. Anti-cancer PDT studies demonstrated that the photosensitisers had negligible dark cytotoxicity. Upon photoirradiation, the Sn(IV) complexes consistently exhibited IC50 values lower than 15 μM against MCF-7 adenocarcinoma cells. An IC50 value of 1.4 μM for 4-Sn after activation at the deep-red region of the spectrum demonstrates that complexes of this type merit further in-depth investigation. The results provide evidence that the low-symmetry Sn(IV) chlorins and N-confused porphyrins merit further in-depth study for use in singlet oxygen applications. , Thesis (MSc) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10
- Authors: Dingiswayo, Somila
- Date: 2021-10
- Subjects: Porphyrins , Photochemotherapy , Cancer Photochemotherapy , Active oxygen Physiological effect , Aromaticity (Chemistry) , Tetrapyrroles , Magnetic circular dichroism , Corroles , Chlorins , Photodynamic antimicrobial chemotherapy (PACT)
- Language: English
- Type: Masters theses , text
- Identifier: http://hdl.handle.net/10962/188843 , vital:44791
- Description: In photodynamic therapy (PDT), the activation of light-sensitive drugs in tumour cells produces reactive singlet oxygen species, which cause tumour destruction through a cascade of biochemical reactions. Over the years, the wavelength of activation has been shown to be a critical factor in the penetration of light. Hence the properties of photosensitiser dyes in this context shape their ability to treat deep-seated tumours. In this study, the synthesis, structural characterisation and photophysicochemical properties of a series of Sn(IV) porphyrins with meso-methylthiophenyl rings that have been prepared to study their PDT and photodynamic antimicrobial chemotherapy (PACT) activity properties are reported. The series of Sn(IV) complexes is comprised of a porphyrin (1-Sn), a corrole (2-Sn), a chlorin (3-Sn) and an N-confused porphyrin (4-Sn). Herein, the low symmetry Sn(IV) porphyrin derivatives are shown to have excellent singlet oxygen generation capabilities, and lifetimes of the triplet excited states were in the microsecond range. For example, 4-Sn had a singlet oxygen quantum yield (ФΔ) and an excited triplet state lifetime (τT) of 0.88 and 27 μs, respectively. The complexes were studied using UV-visible and magnetic circular dichroism (MCD) spectroscopies. Interestingly, the positive-to-negative sign sequences of the Faraday B0 terms of 2-Sn and 3-Sn reveal that the structural modifications involved break the degeneracy of the MOs derived from the 1eg* LUMO of the porphyrin 1-Sn. In contrast, a conventional negative-to-positive sign sequence is observed for 4-Sn, since the confusion of a pyrrole moiety also results in a large separation of the 1a1u and 1a2u MOs of the porphyrin 1-Sn that are derived from the HOMO of a C16H162−parent hydrocarbon perimeter. The trends in the electronic structures of the Sn(IV) complexes were further investigated through a series of time-dependent density functional theory calculations, so that the suitability of the different types of complex for use in singlet oxygen applications could be further explored. During in vitro photodynamic antimicrobial chemotherapy (PACT) studies, chlorin derivative 3-Sn had the highest activity towards S. aureus and E. coli with log10 reductions of 10.5 and 8.74, respectively. The unusually high activity of 3-Sn against E.coli suggests that the interaction of neutral photosensitisers with gram-negativebacteria is more complex than previously understood. Anti-cancer PDT studies demonstrated that the photosensitisers had negligible dark cytotoxicity. Upon photoirradiation, the Sn(IV) complexes consistently exhibited IC50 values lower than 15 μM against MCF-7 adenocarcinoma cells. An IC50 value of 1.4 μM for 4-Sn after activation at the deep-red region of the spectrum demonstrates that complexes of this type merit further in-depth investigation. The results provide evidence that the low-symmetry Sn(IV) chlorins and N-confused porphyrins merit further in-depth study for use in singlet oxygen applications. , Thesis (MSc) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10
The sulphidization of mineral surfaces as applied to the froth flotation process
- Authors: Ramagwede, Mudzimba Hubert
- Date: 1988 , 2013-02-28
- Subjects: Sulfide minerals , Flotation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4296 , http://hdl.handle.net/10962/d1004590
- Description: This work constitutes a fundamental study of the interaction between soluble sulphide,copper (II) oxide and cerussite particles in the presence of Ca²⁺ ,Mg²⁺ starch , gum arabic and Triton X- IOO . A detailed investigation of the effect of pH of the system on the rate of sulphide uptake was made . In addition , the structural form of the surface precipitat.es were determined with the aid of scanning electron microscopy . On the basis of these results , it was concluded that adsorption of sulphide on cerussite in the presence or absence of Ca²⁺ starch, gum arabic and Triton X-IOO could either lead to the formation of a non-uniform or a uniform sulphide layer depending on the experimental conditions . However , the interaction of copper (II) · oxide wi th soluble sulphide in the presence or absence of the above mentioned species always led to the formation or a non-uniform sulphide layer . Preliminary experiments of the interaction between xanthate and sulphidized surface showed that oxide surface covered with metal sulphide layer reacts with less xanthate than the free oxide surface.
- Full Text:
- Date Issued: 1988
- Authors: Ramagwede, Mudzimba Hubert
- Date: 1988 , 2013-02-28
- Subjects: Sulfide minerals , Flotation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4296 , http://hdl.handle.net/10962/d1004590
- Description: This work constitutes a fundamental study of the interaction between soluble sulphide,copper (II) oxide and cerussite particles in the presence of Ca²⁺ ,Mg²⁺ starch , gum arabic and Triton X- IOO . A detailed investigation of the effect of pH of the system on the rate of sulphide uptake was made . In addition , the structural form of the surface precipitat.es were determined with the aid of scanning electron microscopy . On the basis of these results , it was concluded that adsorption of sulphide on cerussite in the presence or absence of Ca²⁺ starch, gum arabic and Triton X-IOO could either lead to the formation of a non-uniform or a uniform sulphide layer depending on the experimental conditions . However , the interaction of copper (II) · oxide wi th soluble sulphide in the presence or absence of the above mentioned species always led to the formation or a non-uniform sulphide layer . Preliminary experiments of the interaction between xanthate and sulphidized surface showed that oxide surface covered with metal sulphide layer reacts with less xanthate than the free oxide surface.
- Full Text:
- Date Issued: 1988
The study of hydroxyoximes and hydroxamic acids supported on macroporous resins and their use in the rapid seperation of metals
- Authors: Hemmes, Marlene
- Date: 1979
- Subjects: Chromatographic analysis , Separation (Technology) , Metal ions , Solvent extraction , Extraction (Chemistry) , Oximes , Metals -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4453 , http://hdl.handle.net/10962/d1009512
- Description: Introduction: The macroporous Amberlite XAD resins were coated with LIX-64N and examined for the rate of uptake of copper . XAD-7 was by far the best support and gave a satisfactory rate of uptake up to loadings of 60% (w/w). The specific surface area of XAD-7 was measured by the adsorption of methylene blue from aqueous solution. The area of the wetted resin was five times less than that of the dry resin. LIX-65N was purified and the anti isomer characterised using spectroscopic techniques . The rate of uptake of copper was not improved by use of purified LIX-65N or by addition of LIX-63. XAD-7 coated with LIX-65N was used in columns. Elution curves for copper showed negligible tailing, and rapid separations of copper from iron (111), nickel, cobalt and magnesium by selective absorption were achieved. Copper was concentrated from very dilute solution at a flow rate of 50 ml min -1 ,and a 99% recovery was obtained. The method was applied to the rapid determination of copper in brass and bronze. A series of long-chain hydroxamic acids were synthesised and tested for suitability as stationary phase on XAD-7. Oleohydroxamic acid and naphthenohydroxamic acid were the most promising. The r ate of uptake of copper was reduced by the use of nonylphenol or amyl alcohol as a diluent. The capacities for copper of the hydroxamic acids were less when supported on XAD-7 than when used as liquid ionexchangers. The distribution coefficients of cobalt, nickel, zinc, lead, vanadium, uranium, iron (111) and copper were measured as a function of pH. XAD-7 coated with oleohydroxamic acid was used in columns for the rapid separation of iron (111) from copper and of copper from nickel, cobalt, lead and zinc. Copper was concentrated from very dilute solution at a flow rate of 45 ml min -1 and a 100,8% recovery was obtained. Copper was successfully separated from nickel by selective elution. The elution curves obtained show negligible tailing. The resin loaded with oleohydroxamic acid lost capacity due to chemical instability. Naphthenohydroxamic acid supported on XAD-7 was not suitable for use in columns, because it was physically unstable.
- Full Text:
- Date Issued: 1979
- Authors: Hemmes, Marlene
- Date: 1979
- Subjects: Chromatographic analysis , Separation (Technology) , Metal ions , Solvent extraction , Extraction (Chemistry) , Oximes , Metals -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4453 , http://hdl.handle.net/10962/d1009512
- Description: Introduction: The macroporous Amberlite XAD resins were coated with LIX-64N and examined for the rate of uptake of copper . XAD-7 was by far the best support and gave a satisfactory rate of uptake up to loadings of 60% (w/w). The specific surface area of XAD-7 was measured by the adsorption of methylene blue from aqueous solution. The area of the wetted resin was five times less than that of the dry resin. LIX-65N was purified and the anti isomer characterised using spectroscopic techniques . The rate of uptake of copper was not improved by use of purified LIX-65N or by addition of LIX-63. XAD-7 coated with LIX-65N was used in columns. Elution curves for copper showed negligible tailing, and rapid separations of copper from iron (111), nickel, cobalt and magnesium by selective absorption were achieved. Copper was concentrated from very dilute solution at a flow rate of 50 ml min -1 ,and a 99% recovery was obtained. The method was applied to the rapid determination of copper in brass and bronze. A series of long-chain hydroxamic acids were synthesised and tested for suitability as stationary phase on XAD-7. Oleohydroxamic acid and naphthenohydroxamic acid were the most promising. The r ate of uptake of copper was reduced by the use of nonylphenol or amyl alcohol as a diluent. The capacities for copper of the hydroxamic acids were less when supported on XAD-7 than when used as liquid ionexchangers. The distribution coefficients of cobalt, nickel, zinc, lead, vanadium, uranium, iron (111) and copper were measured as a function of pH. XAD-7 coated with oleohydroxamic acid was used in columns for the rapid separation of iron (111) from copper and of copper from nickel, cobalt, lead and zinc. Copper was concentrated from very dilute solution at a flow rate of 45 ml min -1 and a 100,8% recovery was obtained. Copper was successfully separated from nickel by selective elution. The elution curves obtained show negligible tailing. The resin loaded with oleohydroxamic acid lost capacity due to chemical instability. Naphthenohydroxamic acid supported on XAD-7 was not suitable for use in columns, because it was physically unstable.
- Full Text:
- Date Issued: 1979
The spectrographic determination of trace elements in citrus leaves
- Authors: Brandt, Peter Jürgen
- Date: 1962
- Subjects: Citrus , Trace elements in plant nutrition
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4516 , http://hdl.handle.net/10962/d1013552
- Description: From Introduction: With the rapidly growing knowledge on trace elements and their influence on plant nutrition the need for accurate and rapid methods for their determination arose. The essential plant nutrients are usually divided into two groups. The major or macronutrient elements, necessary in comparatively large amounts, and the trace or micro-nutrient elements. In the case of plants, the first group includes Sulphur, Phosphorus, Potassium, Magnesium, Calcium and Nitrogen. The essential trace elements are Iron, manganese, Boron, Copper, Zinc, Molybdenum and Chlorine. Cobalt is essential for animal nutrition as a constituent of Vitamin B₁₂, but its essentiality for plants has not yet been proved. The latter group consists of metals which are catalysts in enzyme reactions and whose presence in the plant in minute amount determines whether the plant will be able to complete the vegetative or reproductive stage of its life cycle. Molybdenum may be quoted as an example of an essential trace element. It is generally recognised to be the catalyst responsible for the fixation of Nitrogen.
- Full Text:
- Date Issued: 1962
- Authors: Brandt, Peter Jürgen
- Date: 1962
- Subjects: Citrus , Trace elements in plant nutrition
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4516 , http://hdl.handle.net/10962/d1013552
- Description: From Introduction: With the rapidly growing knowledge on trace elements and their influence on plant nutrition the need for accurate and rapid methods for their determination arose. The essential plant nutrients are usually divided into two groups. The major or macronutrient elements, necessary in comparatively large amounts, and the trace or micro-nutrient elements. In the case of plants, the first group includes Sulphur, Phosphorus, Potassium, Magnesium, Calcium and Nitrogen. The essential trace elements are Iron, manganese, Boron, Copper, Zinc, Molybdenum and Chlorine. Cobalt is essential for animal nutrition as a constituent of Vitamin B₁₂, but its essentiality for plants has not yet been proved. The latter group consists of metals which are catalysts in enzyme reactions and whose presence in the plant in minute amount determines whether the plant will be able to complete the vegetative or reproductive stage of its life cycle. Molybdenum may be quoted as an example of an essential trace element. It is generally recognised to be the catalyst responsible for the fixation of Nitrogen.
- Full Text:
- Date Issued: 1962
The spectrochemical determination of certain minor trace elements in plant material
- Authors: Eve, Desmond John
- Date: 1961
- Subjects: Trace elements Spectrum analysis Plants -- Analysis Plants -- Effect of trace elements on Trace elements in agriculture
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4469 , http://hdl.handle.net/10962/d1011773
- Description: A study has been made of three organic complexing reagents , namely dithizone, oxine and cupferron with a view to developing suitable methods for the separation and concentration of Zn, Co, Ni, Pb, Cu, Mn, Ti , V and Mo prior to the spectrometric determination of their concentrations. In particular the influence of pH on the chloroform extraction of ditihizonates, oxinates and cupferrates from aqueous tartrate and citrate solutions and the separation of iron by oxine extraction has been investigated. The development of a method for the chemical concentration and spectrcgraphic determination of Zn, Co, Ni, Pb, Ti, V and Mo is described and the possibility of determining Nn and Cu flame photometrically as part of the analysis scheme is demonstrated. A specially designed slide rule for the calculation of spectrographic results is described. A direct reading spectrometric method for the determination of Zn, Pb and Cu in plant material is presented. The analysis of plant ash for zinc using the 2138 . 6A spectrum line has been studied and a simple, rapid analysis method is described.
- Full Text:
- Date Issued: 1961
- Authors: Eve, Desmond John
- Date: 1961
- Subjects: Trace elements Spectrum analysis Plants -- Analysis Plants -- Effect of trace elements on Trace elements in agriculture
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4469 , http://hdl.handle.net/10962/d1011773
- Description: A study has been made of three organic complexing reagents , namely dithizone, oxine and cupferron with a view to developing suitable methods for the separation and concentration of Zn, Co, Ni, Pb, Cu, Mn, Ti , V and Mo prior to the spectrometric determination of their concentrations. In particular the influence of pH on the chloroform extraction of ditihizonates, oxinates and cupferrates from aqueous tartrate and citrate solutions and the separation of iron by oxine extraction has been investigated. The development of a method for the chemical concentration and spectrcgraphic determination of Zn, Co, Ni, Pb, Ti, V and Mo is described and the possibility of determining Nn and Cu flame photometrically as part of the analysis scheme is demonstrated. A specially designed slide rule for the calculation of spectrographic results is described. A direct reading spectrometric method for the determination of Zn, Pb and Cu in plant material is presented. The analysis of plant ash for zinc using the 2138 . 6A spectrum line has been studied and a simple, rapid analysis method is described.
- Full Text:
- Date Issued: 1961