Towards an evaluation and protection strategy for critical infrastructure
- Authors: Gottschalk, Jason Howard
- Date: 2015
- Subjects: Computer crimes -- Prevention , Computer networks -- Security measures , Computer crimes -- Law and legislation -- South Africa , Public works -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4721 , http://hdl.handle.net/10962/d1018793
- Description: Critical Infrastructure is often overlooked from an Information Security perspective as being of high importance to protect which may result in Critical Infrastructure being at risk to Cyber related attacks with potential dire consequences. Furthermore, what is considered Critical Infrastructure is often a complex discussion, with varying opinions across audiences. Traditional Critical Infrastructure included power stations, water, sewage pump stations, gas pipe lines, power grids and a new entrant, the “internet of things”. This list is not complete and a constant challenge exists in identifying Critical Infrastructure and its interdependencies. The purpose of this research is to highlight the importance of protecting Critical Infrastructure as well as proposing a high level framework aiding in the identification and securing of Critical Infrastructure. To achieve this, key case studies involving Cyber crime and Cyber warfare, as well as the identification of attack vectors and impact on against Critical Infrastructure (as applicable to Critical Infrastructure where possible), were identified and discussed. Furthermore industry related material was researched as to identify key controls that would aid in protecting Critical Infrastructure. The identification of initiatives that countries were pursuing, that would aid in the protection of Critical Infrastructure, were identified and discussed. Research was conducted into the various standards, frameworks and methodologies available to aid in the identification, remediation and ultimately the protection of Critical Infrastructure. A key output of the research was the development of a hybrid approach to identifying Critical Infrastructure, associated vulnerabilities and an approach for remediation with specific metrics (based on the research performed). The conclusion based on the research is that there is often a need and a requirement to identify and protect Critical Infrastructure however this is usually initiated or driven by non-owners of Critical Infrastructure (Governments, governing bodies, standards bodies and security consultants). Furthermore where there are active initiative by owners very often the suggested approaches are very high level in nature with little direct guidance available for very immature environments.
- Full Text:
- Date Issued: 2015
- Authors: Gottschalk, Jason Howard
- Date: 2015
- Subjects: Computer crimes -- Prevention , Computer networks -- Security measures , Computer crimes -- Law and legislation -- South Africa , Public works -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4721 , http://hdl.handle.net/10962/d1018793
- Description: Critical Infrastructure is often overlooked from an Information Security perspective as being of high importance to protect which may result in Critical Infrastructure being at risk to Cyber related attacks with potential dire consequences. Furthermore, what is considered Critical Infrastructure is often a complex discussion, with varying opinions across audiences. Traditional Critical Infrastructure included power stations, water, sewage pump stations, gas pipe lines, power grids and a new entrant, the “internet of things”. This list is not complete and a constant challenge exists in identifying Critical Infrastructure and its interdependencies. The purpose of this research is to highlight the importance of protecting Critical Infrastructure as well as proposing a high level framework aiding in the identification and securing of Critical Infrastructure. To achieve this, key case studies involving Cyber crime and Cyber warfare, as well as the identification of attack vectors and impact on against Critical Infrastructure (as applicable to Critical Infrastructure where possible), were identified and discussed. Furthermore industry related material was researched as to identify key controls that would aid in protecting Critical Infrastructure. The identification of initiatives that countries were pursuing, that would aid in the protection of Critical Infrastructure, were identified and discussed. Research was conducted into the various standards, frameworks and methodologies available to aid in the identification, remediation and ultimately the protection of Critical Infrastructure. A key output of the research was the development of a hybrid approach to identifying Critical Infrastructure, associated vulnerabilities and an approach for remediation with specific metrics (based on the research performed). The conclusion based on the research is that there is often a need and a requirement to identify and protect Critical Infrastructure however this is usually initiated or driven by non-owners of Critical Infrastructure (Governments, governing bodies, standards bodies and security consultants). Furthermore where there are active initiative by owners very often the suggested approaches are very high level in nature with little direct guidance available for very immature environments.
- Full Text:
- Date Issued: 2015
Targeted attack detection by means of free and open source solutions
- Authors: Bernardo, Louis F
- Date: 2019
- Subjects: Computer networks -- Security measures , Information technology -- Security measures , Computer security -- Management , Data protection
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/92269 , vital:30703
- Description: Compliance requirements are part of everyday business requirements for various areas, such as retail and medical services. As part of compliance it may be required to have infrastructure in place to monitor the activities in the environment to ensure that the relevant data and environment is sufficiently protected. At the core of such monitoring solutions one would find some type of data repository, or database, to store and ultimately correlate the captured events. Such solutions are commonly called Security Information and Event Management, or SIEM for short. Larger companies have been known to use commercial solutions such as IBM's Qradar, Logrythm, or Splunk. However, these come at significant cost and arent suitable for smaller businesses with limited budgets. These solutions require manual configuration of event correlation for detection of activities that place the environment in danger. This usually requires vendor implementation assistance that also would come at a cost. Alternatively, there are open source solutions that provide the required functionality. This research will demonstrate building an open source solution, with minimal to no cost for hardware or software, while still maintaining the capability of detecting targeted attacks. The solution presented in this research includes Wazuh, which is a combination of OSSEC and the ELK stack, integrated with an Network Intrusion Detection System (NIDS). The success of the integration, is determined by measuring postive attack detection based on each different configuration options. To perform the testing, a deliberately vulnerable platform named Metasploitable will be used as a victim host. The victim host vulnerabilities were created specifically to serve as target for Metasploit. The attacks were generated by utilising Metasploit Framework on a prebuilt Kali Linux host.
- Full Text:
- Date Issued: 2019
- Authors: Bernardo, Louis F
- Date: 2019
- Subjects: Computer networks -- Security measures , Information technology -- Security measures , Computer security -- Management , Data protection
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/92269 , vital:30703
- Description: Compliance requirements are part of everyday business requirements for various areas, such as retail and medical services. As part of compliance it may be required to have infrastructure in place to monitor the activities in the environment to ensure that the relevant data and environment is sufficiently protected. At the core of such monitoring solutions one would find some type of data repository, or database, to store and ultimately correlate the captured events. Such solutions are commonly called Security Information and Event Management, or SIEM for short. Larger companies have been known to use commercial solutions such as IBM's Qradar, Logrythm, or Splunk. However, these come at significant cost and arent suitable for smaller businesses with limited budgets. These solutions require manual configuration of event correlation for detection of activities that place the environment in danger. This usually requires vendor implementation assistance that also would come at a cost. Alternatively, there are open source solutions that provide the required functionality. This research will demonstrate building an open source solution, with minimal to no cost for hardware or software, while still maintaining the capability of detecting targeted attacks. The solution presented in this research includes Wazuh, which is a combination of OSSEC and the ELK stack, integrated with an Network Intrusion Detection System (NIDS). The success of the integration, is determined by measuring postive attack detection based on each different configuration options. To perform the testing, a deliberately vulnerable platform named Metasploitable will be used as a victim host. The victim host vulnerabilities were created specifically to serve as target for Metasploit. The attacks were generated by utilising Metasploit Framework on a prebuilt Kali Linux host.
- Full Text:
- Date Issued: 2019
An analysis of the use of DNS for malicious payload distribution
- Authors: Dube, Ishmael
- Date: 2019
- Subjects: Internet domain names , Computer networks -- Security measures , Computer security , Computer network protocols , Data protection
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97531 , vital:31447
- Description: The Domain Name System (DNS) protocol is a fundamental part of Internet activities that can be abused by cybercriminals to conduct malicious activities. Previous research has shown that cybercriminals use different methods, including the DNS protocol, to distribute malicious content, remain hidden and avoid detection from various technologies that are put in place to detect anomalies. This allows botnets and certain malware families to establish covert communication channels that can be used to send or receive data and also distribute malicious payloads using the DNS queries and responses. Cybercriminals use the DNS to breach highly protected networks, distribute malicious content, and exfiltrate sensitive information without being detected by security controls put in place by embedding certain strings in DNS packets. This research undertaking broadens this research field and fills in the existing research gap by extending the analysis of DNS being used as a payload distribution channel to detection of domains that are used to distribute different malicious payloads. This research undertaking analysed the use of the DNS in detecting domains and channels that are used for distributing malicious payloads. Passive DNS data which replicate DNS queries on name servers to detect anomalies in DNS queries was evaluated and analysed in order to detect malicious payloads. The research characterises the malicious payload distribution channels by analysing passive DNS traffic and modelling the DNS query and response patterns. The research found that it is possible to detect malicious payload distribution channels through the analysis of DNS TXT resource records.
- Full Text:
- Date Issued: 2019
- Authors: Dube, Ishmael
- Date: 2019
- Subjects: Internet domain names , Computer networks -- Security measures , Computer security , Computer network protocols , Data protection
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97531 , vital:31447
- Description: The Domain Name System (DNS) protocol is a fundamental part of Internet activities that can be abused by cybercriminals to conduct malicious activities. Previous research has shown that cybercriminals use different methods, including the DNS protocol, to distribute malicious content, remain hidden and avoid detection from various technologies that are put in place to detect anomalies. This allows botnets and certain malware families to establish covert communication channels that can be used to send or receive data and also distribute malicious payloads using the DNS queries and responses. Cybercriminals use the DNS to breach highly protected networks, distribute malicious content, and exfiltrate sensitive information without being detected by security controls put in place by embedding certain strings in DNS packets. This research undertaking broadens this research field and fills in the existing research gap by extending the analysis of DNS being used as a payload distribution channel to detection of domains that are used to distribute different malicious payloads. This research undertaking analysed the use of the DNS in detecting domains and channels that are used for distributing malicious payloads. Passive DNS data which replicate DNS queries on name servers to detect anomalies in DNS queries was evaluated and analysed in order to detect malicious payloads. The research characterises the malicious payload distribution channels by analysing passive DNS traffic and modelling the DNS query and response patterns. The research found that it is possible to detect malicious payload distribution channels through the analysis of DNS TXT resource records.
- Full Text:
- Date Issued: 2019
Evaluating the cyber security skills gap relating to penetration testing
- Authors: Beukes, Dirk Johannes
- Date: 2021
- Subjects: Computer networks -- Security measures , Computer networks -- Monitoring , Computer networks -- Management , Data protection , Information technology -- Security measures , Professionals -- Supply and demand , Electronic data personnel -- Supply and demand
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/171120 , vital:42021
- Description: Information Technology (IT) is growing rapidly and has become an integral part of daily life. It provides a boundless list of services and opportunities, generating boundless sources of information, which could be abused or exploited. Due to this growth, there are thousands of new users added to the grid using computer systems in a static and mobile environment; this fact alone creates endless volumes of data to be exploited and hardware devices to be abused by the wrong people. The growth in the IT environment adds challenges that may affect users in their personal, professional, and business lives. There are constant threats on corporate and private computer networks and computer systems. In the corporate environment companies try to eliminate the threat by testing networks making use of penetration tests and by implementing cyber awareness programs to make employees more aware of the cyber threat. Penetration tests and vulnerability assessments are undervalued; are seen as a formality and are not used to increase system security. If used regularly the computer system will be more secure and attacks minimized. With the growth in technology, industries all over the globe become fully dependent on information systems in doing their day-to-day business. As technology evolves and new technology becomes available, the bigger the risk becomes to protect against the dangers which come with this new technology. For industry to protect itself against this growth in technology, personnel with a certain skill set is needed. This is where cyber security plays a very important role in the protection of information systems to ensure the confidentiality, integrity and availability of the information system itself and the data on the system. Due to this drive to secure information systems, the need for cyber security by professionals is on the rise as well. It is estimated that there is a shortage of one million cyber security professionals globally. What is the reason for this skills shortage? Will it be possible to close this skills shortage gap? This study is about identifying the skills gap and identifying possible ways to close this skills gap. In this study, research was conducted on the cyber security international standards, cyber security training at universities and international certification focusing specifically on penetration testing, the evaluation of the need of industry while recruiting new penetration testers, finishing with suggestions on how to fill possible gaps in the skills market with a conclusion.
- Full Text:
- Date Issued: 2021
- Authors: Beukes, Dirk Johannes
- Date: 2021
- Subjects: Computer networks -- Security measures , Computer networks -- Monitoring , Computer networks -- Management , Data protection , Information technology -- Security measures , Professionals -- Supply and demand , Electronic data personnel -- Supply and demand
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/171120 , vital:42021
- Description: Information Technology (IT) is growing rapidly and has become an integral part of daily life. It provides a boundless list of services and opportunities, generating boundless sources of information, which could be abused or exploited. Due to this growth, there are thousands of new users added to the grid using computer systems in a static and mobile environment; this fact alone creates endless volumes of data to be exploited and hardware devices to be abused by the wrong people. The growth in the IT environment adds challenges that may affect users in their personal, professional, and business lives. There are constant threats on corporate and private computer networks and computer systems. In the corporate environment companies try to eliminate the threat by testing networks making use of penetration tests and by implementing cyber awareness programs to make employees more aware of the cyber threat. Penetration tests and vulnerability assessments are undervalued; are seen as a formality and are not used to increase system security. If used regularly the computer system will be more secure and attacks minimized. With the growth in technology, industries all over the globe become fully dependent on information systems in doing their day-to-day business. As technology evolves and new technology becomes available, the bigger the risk becomes to protect against the dangers which come with this new technology. For industry to protect itself against this growth in technology, personnel with a certain skill set is needed. This is where cyber security plays a very important role in the protection of information systems to ensure the confidentiality, integrity and availability of the information system itself and the data on the system. Due to this drive to secure information systems, the need for cyber security by professionals is on the rise as well. It is estimated that there is a shortage of one million cyber security professionals globally. What is the reason for this skills shortage? Will it be possible to close this skills shortage gap? This study is about identifying the skills gap and identifying possible ways to close this skills gap. In this study, research was conducted on the cyber security international standards, cyber security training at universities and international certification focusing specifically on penetration testing, the evaluation of the need of industry while recruiting new penetration testers, finishing with suggestions on how to fill possible gaps in the skills market with a conclusion.
- Full Text:
- Date Issued: 2021
GPF : a framework for general packet classification on GPU co-processors
- Authors: Nottingham, Alastair
- Date: 2012
- Subjects: Graphics processing units , Coprocessors , Computer network protocols , Computer networks -- Security measures , NVIDIA Corporation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4661 , http://hdl.handle.net/10962/d1006662 , Graphics processing units , Coprocessors , Computer network protocols , Computer networks -- Security measures , NVIDIA Corporation
- Description: This thesis explores the design and experimental implementation of GPF, a novel protocol-independent, multi-match packet classification framework. This framework is targeted and optimised for flexible, efficient execution on NVIDIA GPU platforms through the CUDA API, but should not be difficult to port to other platforms, such as OpenCL, in the future. GPF was conceived and developed in order to accelerate classification of large packet capture files, such as those collected by Network Telescopes. It uses a multiphase SIMD classification process which exploits both the parallelism of packet sets and the redundancy in filter programs, in order to classify packet captures against multiple filters at extremely high rates. The resultant framework - comprised of classification, compilation and buffering components - efficiently leverages GPU resources to classify arbitrary protocols, and return multiple filter results for each packet. The classification functions described were verified and evaluated by testing an experimental prototype implementation against several filter programs, of varying complexity, on devices from three GPU platform generations. In addition to the significant speedup achieved in processing results, analysis indicates that the prototype classification functions perform predictably, and scale linearly with respect to both packet count and filter complexity. Furthermore, classification throughput (packets/s) remained essentially constant regardless of the underlying packet data, and thus the effective data rate when classifying a particular filter was heavily influenced by the average size of packets in the processed capture. For example: in the trivial case of classifying all IPv4 packets ranging in size from 70 bytes to 1KB, the observed data rate achieved by the GPU classification kernels ranged from 60Gbps to 900Gbps on a GTX 275, and from 220Gbps to 3.3Tbps on a GTX 480. In the less trivial case of identifying all ARP, TCP, UDP and ICMP packets for both IPv4 and IPv6 protocols, the effective data rates ranged from 15Gbps to 220Gbps (GTX 275), and from 50Gbps to 740Gbps (GTX 480), for 70B and 1KB packets respectively. , LaTeX with hyperref package
- Full Text:
- Date Issued: 2012
- Authors: Nottingham, Alastair
- Date: 2012
- Subjects: Graphics processing units , Coprocessors , Computer network protocols , Computer networks -- Security measures , NVIDIA Corporation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4661 , http://hdl.handle.net/10962/d1006662 , Graphics processing units , Coprocessors , Computer network protocols , Computer networks -- Security measures , NVIDIA Corporation
- Description: This thesis explores the design and experimental implementation of GPF, a novel protocol-independent, multi-match packet classification framework. This framework is targeted and optimised for flexible, efficient execution on NVIDIA GPU platforms through the CUDA API, but should not be difficult to port to other platforms, such as OpenCL, in the future. GPF was conceived and developed in order to accelerate classification of large packet capture files, such as those collected by Network Telescopes. It uses a multiphase SIMD classification process which exploits both the parallelism of packet sets and the redundancy in filter programs, in order to classify packet captures against multiple filters at extremely high rates. The resultant framework - comprised of classification, compilation and buffering components - efficiently leverages GPU resources to classify arbitrary protocols, and return multiple filter results for each packet. The classification functions described were verified and evaluated by testing an experimental prototype implementation against several filter programs, of varying complexity, on devices from three GPU platform generations. In addition to the significant speedup achieved in processing results, analysis indicates that the prototype classification functions perform predictably, and scale linearly with respect to both packet count and filter complexity. Furthermore, classification throughput (packets/s) remained essentially constant regardless of the underlying packet data, and thus the effective data rate when classifying a particular filter was heavily influenced by the average size of packets in the processed capture. For example: in the trivial case of classifying all IPv4 packets ranging in size from 70 bytes to 1KB, the observed data rate achieved by the GPU classification kernels ranged from 60Gbps to 900Gbps on a GTX 275, and from 220Gbps to 3.3Tbps on a GTX 480. In the less trivial case of identifying all ARP, TCP, UDP and ICMP packets for both IPv4 and IPv6 protocols, the effective data rates ranged from 15Gbps to 220Gbps (GTX 275), and from 50Gbps to 740Gbps (GTX 480), for 70B and 1KB packets respectively. , LaTeX with hyperref package
- Full Text:
- Date Issued: 2012
A comparative study of CERBER, MAKTUB and LOCKY Ransomware using a Hybridised-Malware analysis
- Authors: Schmitt, Veronica
- Date: 2019
- Subjects: Microsoft Windows (Computer file) , Data protection , Computer crimes -- Prevention , Computer security , Computer networks -- Security measures , Computers -- Access control , Malware (Computer software)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/92313 , vital:30702
- Description: There has been a significant increase in the prevalence of Ransomware attacks in the preceding four years to date. This indicates that the battle has not yet been won defending against this class of malware. This research proposes that by identifying the similarities within the operational framework of Ransomware strains, a better overall understanding of their operation and function can be achieved. This, in turn, will aid in a quicker response to future attacks. With the average Ransomware attack taking two hours to be identified, it shows that there is not yet a clear understanding as to why these attacks are so successful. Research into Ransomware is limited by what is currently known on the topic. Due to the limitations of the research the decision was taken to only examined three samples of Ransomware from different families. This was decided due to the complexities and comprehensive nature of the research. The in depth nature of the research and the time constraints associated with it did not allow for proof of concept of this framework to be tested on more than three families, but the exploratory work was promising and should be further explored in future research. The aim of the research is to follow the Hybrid-Malware analysis framework which consists of both static and the dynamic analysis phases, in addition to the digital forensic examination of the infected system. This allows for signature-based findings, along with behavioural and forensic findings all in one. This information allows for a better understanding of how this malware is designed and how it infects and remains persistent on a system. The operating system which has been chosen is the Microsoft Window 7 operating system which is still utilised by a significant proportion of Windows users especially in the corporate environment. The experiment process was designed to enable the researcher the ability to collect information regarding the Ransomware and every aspect of its behaviour and communication on a target system. The results can be compared across the three strains to identify the commonalities. The initial hypothesis was that Ransomware variants are all much like an instant cake box consists of specific building blocks which remain the same with the flavouring of the cake mix being the unique feature.
- Full Text:
- Date Issued: 2019
- Authors: Schmitt, Veronica
- Date: 2019
- Subjects: Microsoft Windows (Computer file) , Data protection , Computer crimes -- Prevention , Computer security , Computer networks -- Security measures , Computers -- Access control , Malware (Computer software)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/92313 , vital:30702
- Description: There has been a significant increase in the prevalence of Ransomware attacks in the preceding four years to date. This indicates that the battle has not yet been won defending against this class of malware. This research proposes that by identifying the similarities within the operational framework of Ransomware strains, a better overall understanding of their operation and function can be achieved. This, in turn, will aid in a quicker response to future attacks. With the average Ransomware attack taking two hours to be identified, it shows that there is not yet a clear understanding as to why these attacks are so successful. Research into Ransomware is limited by what is currently known on the topic. Due to the limitations of the research the decision was taken to only examined three samples of Ransomware from different families. This was decided due to the complexities and comprehensive nature of the research. The in depth nature of the research and the time constraints associated with it did not allow for proof of concept of this framework to be tested on more than three families, but the exploratory work was promising and should be further explored in future research. The aim of the research is to follow the Hybrid-Malware analysis framework which consists of both static and the dynamic analysis phases, in addition to the digital forensic examination of the infected system. This allows for signature-based findings, along with behavioural and forensic findings all in one. This information allows for a better understanding of how this malware is designed and how it infects and remains persistent on a system. The operating system which has been chosen is the Microsoft Window 7 operating system which is still utilised by a significant proportion of Windows users especially in the corporate environment. The experiment process was designed to enable the researcher the ability to collect information regarding the Ransomware and every aspect of its behaviour and communication on a target system. The results can be compared across the three strains to identify the commonalities. The initial hypothesis was that Ransomware variants are all much like an instant cake box consists of specific building blocks which remain the same with the flavouring of the cake mix being the unique feature.
- Full Text:
- Date Issued: 2019
An investigation into the current state of web based cryptominers and cryptojacking
- Authors: Len, Robert
- Date: 2021-04
- Subjects: Cryptocurrencies , Malware (Computer software) , Computer networks -- Security measures , Computer networks -- Monitoring , Cryptomining , Coinhive , Cryptojacking
- Language: English
- Type: thesis , text , Masters , MSc
- Identifier: http://hdl.handle.net/10962/178248 , vital:42924
- Description: The aim of this research was to conduct a review of the current state and extent of surreptitious crypto mining software and its prevalence as a means for income generation. Income is generated through the use of a viewer's browser to execute custom JavaScript code to mine cryptocurrencies such as Monero and Bitcoin. The research aimed to measure the prevalence of illicit mining scripts being utilised for “in-browser" cryptojacking while further analysing the ecosystems that support the cryptomining environment. The extent of the research covers aspects such as the content (or type) of the sites hosting malicious “in-browser" cryptomining software as well as the occurrences of currencies utilised in the cryptographic mining and the analysis of cryptographic mining code samples. This research aims to compare the results of previous work with the current state of affairs since the closure of Coinhive in March 2018. Coinhive were at the time the market leader in such web based mining services. Beyond the analysis of the prevalence of cryptomining on the web today, research into the methodologies and techniques used to detect and counteract cryptomining are also conducted. This includes the most recent developments in malicious JavaScript de-obfuscation as well as cryptomining signature creation and detection. Methodologies for heuristic JavaScript behaviour identification and subsequent identification of potential malicious out-liars are also included within the research of the countermeasure analysis. The research revealed that although no longer functional, Coinhive remained as the most prevalent script being used for “in-browser" cryptomining services. While remaining the most prevalent, there was however a significant decline in overall occurrences compared to when coinhive.com was operational. Analysis of the ecosystem hosting \in-browser" mining websites was found to be distributed both geographically as well as in terms of domain categorisations. , Thesis (MSc) -- Faculty of Science, Computer Science, 2021
- Full Text:
- Date Issued: 2021-04
- Authors: Len, Robert
- Date: 2021-04
- Subjects: Cryptocurrencies , Malware (Computer software) , Computer networks -- Security measures , Computer networks -- Monitoring , Cryptomining , Coinhive , Cryptojacking
- Language: English
- Type: thesis , text , Masters , MSc
- Identifier: http://hdl.handle.net/10962/178248 , vital:42924
- Description: The aim of this research was to conduct a review of the current state and extent of surreptitious crypto mining software and its prevalence as a means for income generation. Income is generated through the use of a viewer's browser to execute custom JavaScript code to mine cryptocurrencies such as Monero and Bitcoin. The research aimed to measure the prevalence of illicit mining scripts being utilised for “in-browser" cryptojacking while further analysing the ecosystems that support the cryptomining environment. The extent of the research covers aspects such as the content (or type) of the sites hosting malicious “in-browser" cryptomining software as well as the occurrences of currencies utilised in the cryptographic mining and the analysis of cryptographic mining code samples. This research aims to compare the results of previous work with the current state of affairs since the closure of Coinhive in March 2018. Coinhive were at the time the market leader in such web based mining services. Beyond the analysis of the prevalence of cryptomining on the web today, research into the methodologies and techniques used to detect and counteract cryptomining are also conducted. This includes the most recent developments in malicious JavaScript de-obfuscation as well as cryptomining signature creation and detection. Methodologies for heuristic JavaScript behaviour identification and subsequent identification of potential malicious out-liars are also included within the research of the countermeasure analysis. The research revealed that although no longer functional, Coinhive remained as the most prevalent script being used for “in-browser" cryptomining services. While remaining the most prevalent, there was however a significant decline in overall occurrences compared to when coinhive.com was operational. Analysis of the ecosystem hosting \in-browser" mining websites was found to be distributed both geographically as well as in terms of domain categorisations. , Thesis (MSc) -- Faculty of Science, Computer Science, 2021
- Full Text:
- Date Issued: 2021-04
Bolvedere: a scalable network flow threat analysis system
- Authors: Herbert, Alan
- Date: 2019
- Subjects: Bolvedere (Computer network analysis system) , Computer networks -- Scalability , Computer networks -- Measurement , Computer networks -- Security measures , Telecommunication -- Traffic -- Measurement
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/71557 , vital:29873
- Description: Since the advent of the Internet, and its public availability in the late 90’s, there have been significant advancements to network technologies and thus a significant increase of the bandwidth available to network users, both human and automated. Although this growth is of great value to network users, it has led to an increase in malicious network-based activities and it is theorized that, as more services become available on the Internet, the volume of such activities will continue to grow. Because of this, there is a need to monitor, comprehend, discern, understand and (where needed) respond to events on networks worldwide. Although this line of thought is simple in its reasoning, undertaking such a task is no small feat. Full packet analysis is a method of network surveillance that seeks out specific characteristics within network traffic that may tell of malicious activity or anomalies in regular network usage. It is carried out within firewalls and implemented through packet classification. In the context of the networks that make up the Internet, this form of packet analysis has become infeasible, as the volume of traffic introduced onto these networks every day is so large that there are simply not enough processing resources to perform such a task on every packet in real time. One could combat this problem by performing post-incident forensics; archiving packets and processing them later. However, as one cannot process all incoming packets, the archive will eventually run out of space. Full packet analysis is also hindered by the fact that some existing, commonly-used solutions are designed around a single host and single thread of execution, an outdated approach that is far slower than necessary on current computing technology. This research explores the conceptual design and implementation of a scalable network traffic analysis system named Bolvedere. Analysis performed by Bolvedere simply asks whether the existence of a connection, coupled with its associated metadata, is enough to conclude something meaningful about that connection. This idea draws away from the traditional processing of every single byte in every single packet monitored on a network link (Deep Packet Inspection) through the concept of working with connection flows. Bolvedere performs its work by leveraging the NetFlow version 9 and IPFIX protocols, but is not limited to these. It is implemented using a modular approach that allows for either complete execution of the system on a single host or the horizontal scaling out of subsystems on multiple hosts. The use of multiple hosts is achieved through the implementation of Zero Message Queue (ZMQ). This allows for Bolvedre to horizontally scale out, which results in an increase in processing resources and thus an increase in analysis throughput. This is due to ease of interprocess communications provided by ZMQ. Many underlying mechanisms in Bolvedere have been automated. This is intended to make the system more userfriendly, as the user need only tell Bolvedere what information they wish to analyse, and the system will then rebuild itself in order to achieve this required task. Bolvedere has also been hardware-accelerated through the use of Field-Programmable Gate Array (FPGA) technologies, which more than doubled the total throughput of the system.
- Full Text:
- Date Issued: 2019
- Authors: Herbert, Alan
- Date: 2019
- Subjects: Bolvedere (Computer network analysis system) , Computer networks -- Scalability , Computer networks -- Measurement , Computer networks -- Security measures , Telecommunication -- Traffic -- Measurement
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/71557 , vital:29873
- Description: Since the advent of the Internet, and its public availability in the late 90’s, there have been significant advancements to network technologies and thus a significant increase of the bandwidth available to network users, both human and automated. Although this growth is of great value to network users, it has led to an increase in malicious network-based activities and it is theorized that, as more services become available on the Internet, the volume of such activities will continue to grow. Because of this, there is a need to monitor, comprehend, discern, understand and (where needed) respond to events on networks worldwide. Although this line of thought is simple in its reasoning, undertaking such a task is no small feat. Full packet analysis is a method of network surveillance that seeks out specific characteristics within network traffic that may tell of malicious activity or anomalies in regular network usage. It is carried out within firewalls and implemented through packet classification. In the context of the networks that make up the Internet, this form of packet analysis has become infeasible, as the volume of traffic introduced onto these networks every day is so large that there are simply not enough processing resources to perform such a task on every packet in real time. One could combat this problem by performing post-incident forensics; archiving packets and processing them later. However, as one cannot process all incoming packets, the archive will eventually run out of space. Full packet analysis is also hindered by the fact that some existing, commonly-used solutions are designed around a single host and single thread of execution, an outdated approach that is far slower than necessary on current computing technology. This research explores the conceptual design and implementation of a scalable network traffic analysis system named Bolvedere. Analysis performed by Bolvedere simply asks whether the existence of a connection, coupled with its associated metadata, is enough to conclude something meaningful about that connection. This idea draws away from the traditional processing of every single byte in every single packet monitored on a network link (Deep Packet Inspection) through the concept of working with connection flows. Bolvedere performs its work by leveraging the NetFlow version 9 and IPFIX protocols, but is not limited to these. It is implemented using a modular approach that allows for either complete execution of the system on a single host or the horizontal scaling out of subsystems on multiple hosts. The use of multiple hosts is achieved through the implementation of Zero Message Queue (ZMQ). This allows for Bolvedre to horizontally scale out, which results in an increase in processing resources and thus an increase in analysis throughput. This is due to ease of interprocess communications provided by ZMQ. Many underlying mechanisms in Bolvedere have been automated. This is intended to make the system more userfriendly, as the user need only tell Bolvedere what information they wish to analyse, and the system will then rebuild itself in order to achieve this required task. Bolvedere has also been hardware-accelerated through the use of Field-Programmable Gate Array (FPGA) technologies, which more than doubled the total throughput of the system.
- Full Text:
- Date Issued: 2019
Data-centric security : towards a utopian model for protecting corporate data on mobile devices
- Authors: Mayisela, Simphiwe Hector
- Date: 2014
- Subjects: Computer security , Computer networks -- Security measures , Business enterprises -- Computer networks -- Security measures , Mobile computing -- Security measures , Mobile communication systems -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4688 , http://hdl.handle.net/10962/d1011094 , Computer security , Computer networks -- Security measures , Business enterprises -- Computer networks -- Security measures , Mobile computing -- Security measures , Mobile communication systems -- Security measures
- Description: Data-centric security is significant in understanding, assessing and mitigating the various risks and impacts of sharing information outside corporate boundaries. Information generally leaves corporate boundaries through mobile devices. Mobile devices continue to evolve as multi-functional tools for everyday life, surpassing their initial intended use. This added capability and increasingly extensive use of mobile devices does not come without a degree of risk - hence the need to guard and protect information as it exists beyond the corporate boundaries and throughout its lifecycle. Literature on existing models crafted to protect data, rather than infrastructure in which the data resides, is reviewed. Technologies that organisations have implemented to adopt the data-centric model are studied. A utopian model that takes into account the shortcomings of existing technologies and deficiencies of common theories is proposed. Two sets of qualitative studies are reported; the first is a preliminary online survey to assess the ubiquity of mobile devices and extent of technology adoption towards implementation of data-centric model; and the second comprises of a focus survey and expert interviews pertaining on technologies that organisations have implemented to adopt the data-centric model. The latter study revealed insufficient data at the time of writing for the results to be statistically significant; however; indicative trends supported the assertions documented in the literature review. The question that this research answers is whether or not current technology implementations designed to mitigate risks from mobile devices, actually address business requirements. This research question, answered through these two sets qualitative studies, discovered inconsistencies between the technology implementations and business requirements. The thesis concludes by proposing a realistic model, based on the outcome of the qualitative study, which bridges the gap between the technology implementations and business requirements. Future work which could perhaps be conducted in light of the findings and the comments from this research is also considered.
- Full Text:
- Date Issued: 2014
- Authors: Mayisela, Simphiwe Hector
- Date: 2014
- Subjects: Computer security , Computer networks -- Security measures , Business enterprises -- Computer networks -- Security measures , Mobile computing -- Security measures , Mobile communication systems -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4688 , http://hdl.handle.net/10962/d1011094 , Computer security , Computer networks -- Security measures , Business enterprises -- Computer networks -- Security measures , Mobile computing -- Security measures , Mobile communication systems -- Security measures
- Description: Data-centric security is significant in understanding, assessing and mitigating the various risks and impacts of sharing information outside corporate boundaries. Information generally leaves corporate boundaries through mobile devices. Mobile devices continue to evolve as multi-functional tools for everyday life, surpassing their initial intended use. This added capability and increasingly extensive use of mobile devices does not come without a degree of risk - hence the need to guard and protect information as it exists beyond the corporate boundaries and throughout its lifecycle. Literature on existing models crafted to protect data, rather than infrastructure in which the data resides, is reviewed. Technologies that organisations have implemented to adopt the data-centric model are studied. A utopian model that takes into account the shortcomings of existing technologies and deficiencies of common theories is proposed. Two sets of qualitative studies are reported; the first is a preliminary online survey to assess the ubiquity of mobile devices and extent of technology adoption towards implementation of data-centric model; and the second comprises of a focus survey and expert interviews pertaining on technologies that organisations have implemented to adopt the data-centric model. The latter study revealed insufficient data at the time of writing for the results to be statistically significant; however; indicative trends supported the assertions documented in the literature review. The question that this research answers is whether or not current technology implementations designed to mitigate risks from mobile devices, actually address business requirements. This research question, answered through these two sets qualitative studies, discovered inconsistencies between the technology implementations and business requirements. The thesis concludes by proposing a realistic model, based on the outcome of the qualitative study, which bridges the gap between the technology implementations and business requirements. Future work which could perhaps be conducted in light of the findings and the comments from this research is also considered.
- Full Text:
- Date Issued: 2014
A comparison of exact string search algorithms for deep packet inspection
- Authors: Hunt, Kieran
- Date: 2018
- Subjects: Algorithms , Firewalls (Computer security) , Computer networks -- Security measures , Intrusion detection systems (Computer security) , Deep Packet Inspection
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/60629 , vital:27807
- Description: Every day, computer networks throughout the world face a constant onslaught of attacks. To combat these, network administrators are forced to employ a multitude of mitigating measures. Devices such as firewalls and Intrusion Detection Systems are prevalent today and employ extensive Deep Packet Inspection to scrutinise each piece of network traffic. Systems such as these usually require specialised hardware to meet the demand imposed by high throughput networks. Hardware like this is extremely expensive and singular in its function. It is with this in mind that the string search algorithms are introduced. These algorithms have been proven to perform well when searching through large volumes of text and may be able to perform equally well in the context of Deep Packet Inspection. String search algorithms are designed to match a single pattern to a substring of a given piece of text. This is not unlike the heuristics employed by traditional Deep Packet Inspection systems. This research compares the performance of a large number of string search algorithms during packet processing. Deep Packet Inspection places stringent restrictions on the reliability and speed of the algorithms due to increased performance pressures. A test system had to be designed in order to properly test the string search algorithms in the context of Deep Packet Inspection. The system allowed for precise and repeatable tests of each algorithm and then for their comparison. Of the algorithms tested, the Horspool and Quick Search algorithms posted the best results for both speed and reliability. The Not So Naive and Rabin-Karp algorithms were slowest overall.
- Full Text:
- Date Issued: 2018
- Authors: Hunt, Kieran
- Date: 2018
- Subjects: Algorithms , Firewalls (Computer security) , Computer networks -- Security measures , Intrusion detection systems (Computer security) , Deep Packet Inspection
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/60629 , vital:27807
- Description: Every day, computer networks throughout the world face a constant onslaught of attacks. To combat these, network administrators are forced to employ a multitude of mitigating measures. Devices such as firewalls and Intrusion Detection Systems are prevalent today and employ extensive Deep Packet Inspection to scrutinise each piece of network traffic. Systems such as these usually require specialised hardware to meet the demand imposed by high throughput networks. Hardware like this is extremely expensive and singular in its function. It is with this in mind that the string search algorithms are introduced. These algorithms have been proven to perform well when searching through large volumes of text and may be able to perform equally well in the context of Deep Packet Inspection. String search algorithms are designed to match a single pattern to a substring of a given piece of text. This is not unlike the heuristics employed by traditional Deep Packet Inspection systems. This research compares the performance of a large number of string search algorithms during packet processing. Deep Packet Inspection places stringent restrictions on the reliability and speed of the algorithms due to increased performance pressures. A test system had to be designed in order to properly test the string search algorithms in the context of Deep Packet Inspection. The system allowed for precise and repeatable tests of each algorithm and then for their comparison. Of the algorithms tested, the Horspool and Quick Search algorithms posted the best results for both speed and reliability. The Not So Naive and Rabin-Karp algorithms were slowest overall.
- Full Text:
- Date Issued: 2018
A framework for malicious host fingerprinting using distributed network sensors
- Authors: Hunter, Samuel Oswald
- Date: 2018
- Subjects: Computer networks -- Security measures , Malware (Computer software) , Multisensor data fusion , Distributed Sensor Networks , Automated Reconnaissance Framework , Latency Based Multilateration
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/60653 , vital:27811
- Description: Numerous software agents exist and are responsible for increasing volumes of malicious traffic that is observed on the Internet today. From a technical perspective the existing techniques for monitoring malicious agents and traffic were not developed to allow for the interrogation of the source of malicious traffic. This interrogation or reconnaissance would be considered active analysis as opposed to existing, mostly passive analysis. Unlike passive analysis, the active techniques are time-sensitive and their results become increasingly inaccurate as time delta between observation and interrogation increases. In addition to this, some studies had shown that the geographic separation of hosts on the Internet have resulted in pockets of different malicious agents and traffic targeting victims. As such it would be important to perform any kind of data collection over various source and in distributed IP address space. The data gathering and exposure capabilities of sensors such as honeypots and network telescopes were extended through the development of near-realtime Distributed Sensor Network modules that allowed for the near-realtime analysis of malicious traffic from distributed, heterogeneous monitoring sensors. In order to utilise the data exposed by the near-realtime Distributed Sensor Network modules an Automated Reconnaissance Framework was created, this framework was tasked with active and passive information collection and analysis of data in near-realtime and was designed from an adapted Multi Sensor Data Fusion model. The hypothesis was made that if sufficiently different characteristics of a host could be identified; combined they could act as a unique fingerprint for that host, potentially allowing for the re-identification of that host, even if its IP address had changed. To this end the concept of Latency Based Multilateration was introduced, acting as an additional metric for remote host fingerprinting. The vast amount of information gathered by the AR-Framework required the development of visualisation tools which could illustrate this data in near-realtime and also provided various degrees of interaction to accommodate human interpretation of such data. Ultimately the data collected through the application of the near-realtime Distributed Sensor Network and AR-Framework provided a unique perspective of a malicious host demographic. Allowing for new correlations to be drawn between attributes such as common open ports and operating systems, location, and inferred intent of these malicious hosts. The result of which expands our current understanding of malicious hosts on the Internet and enables further research in the area.
- Full Text:
- Date Issued: 2018
- Authors: Hunter, Samuel Oswald
- Date: 2018
- Subjects: Computer networks -- Security measures , Malware (Computer software) , Multisensor data fusion , Distributed Sensor Networks , Automated Reconnaissance Framework , Latency Based Multilateration
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/60653 , vital:27811
- Description: Numerous software agents exist and are responsible for increasing volumes of malicious traffic that is observed on the Internet today. From a technical perspective the existing techniques for monitoring malicious agents and traffic were not developed to allow for the interrogation of the source of malicious traffic. This interrogation or reconnaissance would be considered active analysis as opposed to existing, mostly passive analysis. Unlike passive analysis, the active techniques are time-sensitive and their results become increasingly inaccurate as time delta between observation and interrogation increases. In addition to this, some studies had shown that the geographic separation of hosts on the Internet have resulted in pockets of different malicious agents and traffic targeting victims. As such it would be important to perform any kind of data collection over various source and in distributed IP address space. The data gathering and exposure capabilities of sensors such as honeypots and network telescopes were extended through the development of near-realtime Distributed Sensor Network modules that allowed for the near-realtime analysis of malicious traffic from distributed, heterogeneous monitoring sensors. In order to utilise the data exposed by the near-realtime Distributed Sensor Network modules an Automated Reconnaissance Framework was created, this framework was tasked with active and passive information collection and analysis of data in near-realtime and was designed from an adapted Multi Sensor Data Fusion model. The hypothesis was made that if sufficiently different characteristics of a host could be identified; combined they could act as a unique fingerprint for that host, potentially allowing for the re-identification of that host, even if its IP address had changed. To this end the concept of Latency Based Multilateration was introduced, acting as an additional metric for remote host fingerprinting. The vast amount of information gathered by the AR-Framework required the development of visualisation tools which could illustrate this data in near-realtime and also provided various degrees of interaction to accommodate human interpretation of such data. Ultimately the data collected through the application of the near-realtime Distributed Sensor Network and AR-Framework provided a unique perspective of a malicious host demographic. Allowing for new correlations to be drawn between attributes such as common open ports and operating systems, location, and inferred intent of these malicious hosts. The result of which expands our current understanding of malicious hosts on the Internet and enables further research in the area.
- Full Text:
- Date Issued: 2018
Log analysis aided by latent semantic mapping
- Authors: Buys, Stephanus
- Date: 2013 , 2013-04-14
- Subjects: Latent semantic indexing , Data mining , Computer networks -- Security measures , Computer hackers , Computer security
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4575 , http://hdl.handle.net/10962/d1002963 , Latent semantic indexing , Data mining , Computer networks -- Security measures , Computer hackers , Computer security
- Description: In an age of zero-day exploits and increased on-line attacks on computing infrastructure, operational security practitioners are becoming increasingly aware of the value of the information captured in log events. Analysis of these events is critical during incident response, forensic investigations related to network breaches, hacking attacks and data leaks. Such analysis has led to the discipline of Security Event Analysis, also known as Log Analysis. There are several challenges when dealing with events, foremost being the increased volumes at which events are often generated and stored. Furthermore, events are often captured as unstructured data, with very little consistency in the formats or contents of the events. In this environment, security analysts and implementers of Log Management (LM) or Security Information and Event Management (SIEM) systems face the daunting task of identifying, classifying and disambiguating massive volumes of events in order for security analysis and automation to proceed. Latent Semantic Mapping (LSM) is a proven paradigm shown to be an effective method of, among other things, enabling word clustering, document clustering, topic clustering and semantic inference. This research is an investigation into the practical application of LSM in the discipline of Security Event Analysis, showing the value of using LSM to assist practitioners in identifying types of events, classifying events as belonging to certain sources or technologies and disambiguating different events from each other. The culmination of this research presents adaptations to traditional natural language processing techniques that resulted in improved efficacy of LSM when dealing with Security Event Analysis. This research provides strong evidence supporting the wider adoption and use of LSM, as well as further investigation into Security Event Analysis assisted by LSM and other natural language or computer-learning processing techniques. , LaTeX with hyperref package , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- Authors: Buys, Stephanus
- Date: 2013 , 2013-04-14
- Subjects: Latent semantic indexing , Data mining , Computer networks -- Security measures , Computer hackers , Computer security
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4575 , http://hdl.handle.net/10962/d1002963 , Latent semantic indexing , Data mining , Computer networks -- Security measures , Computer hackers , Computer security
- Description: In an age of zero-day exploits and increased on-line attacks on computing infrastructure, operational security practitioners are becoming increasingly aware of the value of the information captured in log events. Analysis of these events is critical during incident response, forensic investigations related to network breaches, hacking attacks and data leaks. Such analysis has led to the discipline of Security Event Analysis, also known as Log Analysis. There are several challenges when dealing with events, foremost being the increased volumes at which events are often generated and stored. Furthermore, events are often captured as unstructured data, with very little consistency in the formats or contents of the events. In this environment, security analysts and implementers of Log Management (LM) or Security Information and Event Management (SIEM) systems face the daunting task of identifying, classifying and disambiguating massive volumes of events in order for security analysis and automation to proceed. Latent Semantic Mapping (LSM) is a proven paradigm shown to be an effective method of, among other things, enabling word clustering, document clustering, topic clustering and semantic inference. This research is an investigation into the practical application of LSM in the discipline of Security Event Analysis, showing the value of using LSM to assist practitioners in identifying types of events, classifying events as belonging to certain sources or technologies and disambiguating different events from each other. The culmination of this research presents adaptations to traditional natural language processing techniques that resulted in improved efficacy of LSM when dealing with Security Event Analysis. This research provides strong evidence supporting the wider adoption and use of LSM, as well as further investigation into Security Event Analysis assisted by LSM and other natural language or computer-learning processing techniques. , LaTeX with hyperref package , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
Pursuing cost-effective secure network micro-segmentation
- Authors: Fürst, Mark Richard
- Date: 2018
- Subjects: Computer networks -- Security measures , Computer networks -- Access control , Firewalls (Computer security) , IPSec (Computer network protocol) , Network micro-segmentation
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/131106 , vital:36524
- Description: Traditional network segmentation allows discrete trust levels to be defined for different network segments, using physical firewalls or routers that control north-south traffic flowing between different interfaces. This technique reduces the attack surface area should an attacker breach one of the perimeter defences. However, east-west traffic flowing between endpoints within the same network segment does not pass through a firewall, and an attacker may be able to move laterally between endpoints within that segment. Network micro-segmentation was designed to address the challenge of controlling east-west traffic, and various solutions have been released with differing levels of capabilities and feature sets. These approaches range from simple network switch Access Control List based segmentation to complex hypervisor based software-defined security segments defined down to the individual workload, container or process level, and enforced via policy based security controls for each segment. Several commercial solutions for network micro-segmentation exist, but these are primarily focused on physical and cloud data centres, and are often accompanied by significant capital outlay and resource requirements. Given these constraints, this research determines whether existing tools provided with operating systems can be re-purposed to implement micro-segmentation and restrict east-west traffic within one or more network segments for a small-to-medium sized corporate network. To this end, a proof-of-concept lab environment was built with a heterogeneous mix of Windows and Linux virtual servers and workstations deployed in an Active Directory domain. The use of Group Policy Objects to deploy IPsec Server and Domain Isolation for controlling traffic between endpoints is examined, in conjunction with IPsec Authenticated Header and Encapsulating Security Payload modes as an additional layer of security. The outcome of the research shows that revisiting existing tools can enable organisations to implement an additional, cost-effective secure layer of defence in their network.
- Full Text:
- Date Issued: 2018
- Authors: Fürst, Mark Richard
- Date: 2018
- Subjects: Computer networks -- Security measures , Computer networks -- Access control , Firewalls (Computer security) , IPSec (Computer network protocol) , Network micro-segmentation
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/131106 , vital:36524
- Description: Traditional network segmentation allows discrete trust levels to be defined for different network segments, using physical firewalls or routers that control north-south traffic flowing between different interfaces. This technique reduces the attack surface area should an attacker breach one of the perimeter defences. However, east-west traffic flowing between endpoints within the same network segment does not pass through a firewall, and an attacker may be able to move laterally between endpoints within that segment. Network micro-segmentation was designed to address the challenge of controlling east-west traffic, and various solutions have been released with differing levels of capabilities and feature sets. These approaches range from simple network switch Access Control List based segmentation to complex hypervisor based software-defined security segments defined down to the individual workload, container or process level, and enforced via policy based security controls for each segment. Several commercial solutions for network micro-segmentation exist, but these are primarily focused on physical and cloud data centres, and are often accompanied by significant capital outlay and resource requirements. Given these constraints, this research determines whether existing tools provided with operating systems can be re-purposed to implement micro-segmentation and restrict east-west traffic within one or more network segments for a small-to-medium sized corporate network. To this end, a proof-of-concept lab environment was built with a heterogeneous mix of Windows and Linux virtual servers and workstations deployed in an Active Directory domain. The use of Group Policy Objects to deploy IPsec Server and Domain Isolation for controlling traffic between endpoints is examined, in conjunction with IPsec Authenticated Header and Encapsulating Security Payload modes as an additional layer of security. The outcome of the research shows that revisiting existing tools can enable organisations to implement an additional, cost-effective secure layer of defence in their network.
- Full Text:
- Date Issued: 2018
Towards a threat assessment framework for consumer health wearables
- Authors: Mnjama, Javan Joshua
- Date: 2018
- Subjects: Activity trackers (Wearable technology) , Computer networks -- Security measures , Data protection , Information storage and retrieval systems -- Security systems , Computer security -- Software , Consumer Health Wearable Threat Assessment Framework , Design Science Research
- Language: English
- Type: text , Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10962/62649 , vital:28225
- Description: The collection of health data such as physical activity, consumption and physiological data through the use of consumer health wearables via fitness trackers are very beneficial for the promotion of physical wellness. However, consumer health wearables and their associated applications are known to have privacy and security concerns that can potentially make the collected personal health data vulnerable to hackers. These concerns are attributed to security theoretical frameworks not sufficiently addressing the entirety of privacy and security concerns relating to the diverse technological ecosystem of consumer health wearables. The objective of this research was therefore to develop a threat assessment framework that can be used to guide the detection of vulnerabilities which affect consumer health wearables and their associated applications. To meet this objective, the Design Science Research methodology was used to develop the desired artefact (Consumer Health Wearable Threat Assessment Framework). The framework is comprised of fourteen vulnerabilities classified according to Authentication, Authorization, Availability, Confidentiality, Non-Repudiation and Integrity. Through developing the artefact, the threat assessment framework was demonstrated on two fitness trackers and their associated applications. It was discovered, that the framework was able to identify how these vulnerabilities affected, these two test cases based on the classification categories of the framework. The framework was also evaluated by four security experts who assessed the quality, utility and efficacy of the framework. Experts, supported the use of the framework as a relevant and comprehensive framework to guide the detection of vulnerabilities towards consumer health wearables and their associated applications. The implication of this research study is that the framework can be used by developers to better identify the vulnerabilities of consumer health wearables and their associated applications. This will assist in creating a more securer environment for the storage and use of health data by consumer health wearables.
- Full Text:
- Date Issued: 2018
- Authors: Mnjama, Javan Joshua
- Date: 2018
- Subjects: Activity trackers (Wearable technology) , Computer networks -- Security measures , Data protection , Information storage and retrieval systems -- Security systems , Computer security -- Software , Consumer Health Wearable Threat Assessment Framework , Design Science Research
- Language: English
- Type: text , Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10962/62649 , vital:28225
- Description: The collection of health data such as physical activity, consumption and physiological data through the use of consumer health wearables via fitness trackers are very beneficial for the promotion of physical wellness. However, consumer health wearables and their associated applications are known to have privacy and security concerns that can potentially make the collected personal health data vulnerable to hackers. These concerns are attributed to security theoretical frameworks not sufficiently addressing the entirety of privacy and security concerns relating to the diverse technological ecosystem of consumer health wearables. The objective of this research was therefore to develop a threat assessment framework that can be used to guide the detection of vulnerabilities which affect consumer health wearables and their associated applications. To meet this objective, the Design Science Research methodology was used to develop the desired artefact (Consumer Health Wearable Threat Assessment Framework). The framework is comprised of fourteen vulnerabilities classified according to Authentication, Authorization, Availability, Confidentiality, Non-Repudiation and Integrity. Through developing the artefact, the threat assessment framework was demonstrated on two fitness trackers and their associated applications. It was discovered, that the framework was able to identify how these vulnerabilities affected, these two test cases based on the classification categories of the framework. The framework was also evaluated by four security experts who assessed the quality, utility and efficacy of the framework. Experts, supported the use of the framework as a relevant and comprehensive framework to guide the detection of vulnerabilities towards consumer health wearables and their associated applications. The implication of this research study is that the framework can be used by developers to better identify the vulnerabilities of consumer health wearables and their associated applications. This will assist in creating a more securer environment for the storage and use of health data by consumer health wearables.
- Full Text:
- Date Issued: 2018
Limiting vulnerability exposure through effective patch management: threat mitigation through vulnerability remediation
- Authors: White, Dominic Stjohn Dolin
- Date: 2007 , 2007-02-08
- Subjects: Computer networks -- Security measures , Computer viruses , Computer security
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4629 , http://hdl.handle.net/10962/d1006510 , Computer networks -- Security measures , Computer viruses , Computer security
- Description: This document aims to provide a complete discussion on vulnerability and patch management. The first chapters look at the trends relating to vulnerabilities, exploits, attacks and patches. These trends describe the drivers of patch and vulnerability management and situate the discussion in the current security climate. The following chapters then aim to present both policy and technical solutions to the problem. The policies described lay out a comprehensive set of steps that can be followed by any organisation to implement their own patch management policy, including practical advice on integration with other policies, managing risk, identifying vulnerability, strategies for reducing downtime and generating metrics to measure progress. Having covered the steps that can be taken by users, a strategy describing how best a vendor should implement a related patch release policy is provided. An argument is made that current monthly patch release schedules are inadequate to allow users to most effectively and timeously mitigate vulnerabilities. The final chapters discuss the technical aspect of automating parts of the policies described. In particular the concept of 'defense in depth' is used to discuss additional strategies for 'buying time' during the patch process. The document then goes on to conclude that in the face of increasing malicious activity and more complex patching, solid frameworks such as those provided in this document are required to ensure an organisation can fully manage the patching process. However, more research is required to fully understand vulnerabilities and exploits. In particular more attention must be paid to threats, as little work as been done to fully understand threat-agent capabilities and activities from a day to day basis. , TeX output 2007.02.08:2212 , Adobe Acrobat 9.51 Paper Capture Plug-in
- Full Text:
- Date Issued: 2007
- Authors: White, Dominic Stjohn Dolin
- Date: 2007 , 2007-02-08
- Subjects: Computer networks -- Security measures , Computer viruses , Computer security
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4629 , http://hdl.handle.net/10962/d1006510 , Computer networks -- Security measures , Computer viruses , Computer security
- Description: This document aims to provide a complete discussion on vulnerability and patch management. The first chapters look at the trends relating to vulnerabilities, exploits, attacks and patches. These trends describe the drivers of patch and vulnerability management and situate the discussion in the current security climate. The following chapters then aim to present both policy and technical solutions to the problem. The policies described lay out a comprehensive set of steps that can be followed by any organisation to implement their own patch management policy, including practical advice on integration with other policies, managing risk, identifying vulnerability, strategies for reducing downtime and generating metrics to measure progress. Having covered the steps that can be taken by users, a strategy describing how best a vendor should implement a related patch release policy is provided. An argument is made that current monthly patch release schedules are inadequate to allow users to most effectively and timeously mitigate vulnerabilities. The final chapters discuss the technical aspect of automating parts of the policies described. In particular the concept of 'defense in depth' is used to discuss additional strategies for 'buying time' during the patch process. The document then goes on to conclude that in the face of increasing malicious activity and more complex patching, solid frameworks such as those provided in this document are required to ensure an organisation can fully manage the patching process. However, more research is required to fully understand vulnerabilities and exploits. In particular more attention must be paid to threats, as little work as been done to fully understand threat-agent capabilities and activities from a day to day basis. , TeX output 2007.02.08:2212 , Adobe Acrobat 9.51 Paper Capture Plug-in
- Full Text:
- Date Issued: 2007
Securing softswitches from malicious attacks
- Authors: Opie, Jake Weyman
- Date: 2007
- Subjects: Internet telephony -- Security measures , Computer networks -- Security measures , Digital telephone systems , Communication -- Technological innovations , Computer network protocols , TCP/IP (Computer network protocol) , Switching theory
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4683 , http://hdl.handle.net/10962/d1007714 , Internet telephony -- Security measures , Computer networks -- Security measures , Digital telephone systems , Communication -- Technological innovations , Computer network protocols , TCP/IP (Computer network protocol) , Switching theory
- Description: Traditionally, real-time communication, such as voice calls, has run on separate, closed networks. Of all the limitations that these networks had, the ability of malicious attacks to cripple communication was not a crucial one. This situation has changed radically now that real-time communication and data have merged to share the same network. The objective of this project is to investigate the securing of softswitches with functionality similar to Private Branch Exchanges (PBX) from malicious attacks. The focus of the project will be a practical investigation of how to secure ILANGA, an ASTERISK-based system under development at Rhodes University. The practical investigation that focuses on ILANGA is based on performing six varied experiments on the different components of ILANGA. Before the six experiments are performed, basic preliminary security measures and the restrictions placed on the access to the database are discussed. The outcomes of these experiments are discussed and the precise reasons why these attacks were either successful or unsuccessful are given. Suggestions of a theoretical nature on how to defend against the successful attacks are also presented.
- Full Text:
- Date Issued: 2007
- Authors: Opie, Jake Weyman
- Date: 2007
- Subjects: Internet telephony -- Security measures , Computer networks -- Security measures , Digital telephone systems , Communication -- Technological innovations , Computer network protocols , TCP/IP (Computer network protocol) , Switching theory
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4683 , http://hdl.handle.net/10962/d1007714 , Internet telephony -- Security measures , Computer networks -- Security measures , Digital telephone systems , Communication -- Technological innovations , Computer network protocols , TCP/IP (Computer network protocol) , Switching theory
- Description: Traditionally, real-time communication, such as voice calls, has run on separate, closed networks. Of all the limitations that these networks had, the ability of malicious attacks to cripple communication was not a crucial one. This situation has changed radically now that real-time communication and data have merged to share the same network. The objective of this project is to investigate the securing of softswitches with functionality similar to Private Branch Exchanges (PBX) from malicious attacks. The focus of the project will be a practical investigation of how to secure ILANGA, an ASTERISK-based system under development at Rhodes University. The practical investigation that focuses on ILANGA is based on performing six varied experiments on the different components of ILANGA. Before the six experiments are performed, basic preliminary security measures and the restrictions placed on the access to the database are discussed. The outcomes of these experiments are discussed and the precise reasons why these attacks were either successful or unsuccessful are given. Suggestions of a theoretical nature on how to defend against the successful attacks are also presented.
- Full Text:
- Date Issued: 2007
Categorising Network Telescope data using big data enrichment techniques
- Authors: Davis, Michael Reginald
- Date: 2019
- Subjects: Denial of service attacks , Big data , Computer networks -- Security measures
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/92941 , vital:30766
- Description: Network Telescopes, Internet backbone sampling, IDS and other forms of network-sourced Threat Intelligence provide researchers with insight into the methods and intent of remote entities by capturing network traffic and analysing the resulting data. This analysis and determination of intent is made difficult by the large amounts of potentially malicious traffic, coupled with limited amount of knowledge that can be attributed to the source of the incoming data, as the source is known only by its IP address. Due to the lack of commonly available tooling, many researchers start this analysis from the beginning and so repeat and re-iterate previous research as the bulk of their work. As a result new insight into methods and approaches of analysis is gained at a high cost. Our research approaches this problem by using additional knowledge about the source IP address such as open ports, reverse and forward DNS, BGP routing tables and more, to enhance the researcher's ability to understand the traffic source. The research is a BigData experiment, where large (hundreds of GB) datasets are merged with a two month section of Network Telescope data using a set of Python scripts. The result are written to a Google BigQuery database table. Analysis of the network data is greatly simplified, with questions about the nature of the source, such as its device class (home routing device or server), potential vulnerabilities (open telnet ports or databases) and location becoming relatively easy to answer. Using this approach, researchers can focus on the questions that need answering and efficiently address them. This research could be taken further by using additional data sources such as Geo-location, WHOIS lookups, Threat Intelligence feeds and many others. Other potential areas of research include real-time categorisation of incoming packets, in order to better inform alerting and reporting systems' configuration. In conclusion, categorising Network Telescope data in this way provides insight into the intent of the (apparent) originator and as such is a valuable tool for those seeking to understand the purpose and intent of arriving packets. In particular, the ability to remove packets categorised as non-malicious (e.g. those in the Research category) from the data eliminates a known source of `noise' from the data. This allows the researcher to focus their efforts in a more productive manner.
- Full Text:
- Date Issued: 2019
- Authors: Davis, Michael Reginald
- Date: 2019
- Subjects: Denial of service attacks , Big data , Computer networks -- Security measures
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/92941 , vital:30766
- Description: Network Telescopes, Internet backbone sampling, IDS and other forms of network-sourced Threat Intelligence provide researchers with insight into the methods and intent of remote entities by capturing network traffic and analysing the resulting data. This analysis and determination of intent is made difficult by the large amounts of potentially malicious traffic, coupled with limited amount of knowledge that can be attributed to the source of the incoming data, as the source is known only by its IP address. Due to the lack of commonly available tooling, many researchers start this analysis from the beginning and so repeat and re-iterate previous research as the bulk of their work. As a result new insight into methods and approaches of analysis is gained at a high cost. Our research approaches this problem by using additional knowledge about the source IP address such as open ports, reverse and forward DNS, BGP routing tables and more, to enhance the researcher's ability to understand the traffic source. The research is a BigData experiment, where large (hundreds of GB) datasets are merged with a two month section of Network Telescope data using a set of Python scripts. The result are written to a Google BigQuery database table. Analysis of the network data is greatly simplified, with questions about the nature of the source, such as its device class (home routing device or server), potential vulnerabilities (open telnet ports or databases) and location becoming relatively easy to answer. Using this approach, researchers can focus on the questions that need answering and efficiently address them. This research could be taken further by using additional data sources such as Geo-location, WHOIS lookups, Threat Intelligence feeds and many others. Other potential areas of research include real-time categorisation of incoming packets, in order to better inform alerting and reporting systems' configuration. In conclusion, categorising Network Telescope data in this way provides insight into the intent of the (apparent) originator and as such is a valuable tool for those seeking to understand the purpose and intent of arriving packets. In particular, the ability to remove packets categorised as non-malicious (e.g. those in the Research category) from the data eliminates a known source of `noise' from the data. This allows the researcher to focus their efforts in a more productive manner.
- Full Text:
- Date Issued: 2019
Distributed authentication for resource control
- Authors: Burdis, Keith Robert
- Date: 2000
- Subjects: Computers -- Access control , Data protection , Computer networks -- Security measures , Electronic data processing departments -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4630 , http://hdl.handle.net/10962/d1006512 , Computers -- Access control , Data protection , Computer networks -- Security measures , Electronic data processing departments -- Security measures
- Description: This thesis examines distributed authentication in the process of controlling computing resources. We investigate user sign-on and two of the main authentication technologies that can be used to control a resource through authentication and providing additional security services. The problems with the existing sign-on scenario are that users have too much credential information to manage and are prompted for this information too often. Single Sign-On (SSO) is a viable solution to this problem if physical procedures are introduced to minimise the risks associated with its use. The Generic Security Services API (GSS-API) provides security services in a manner in- dependent of the environment in which these security services are used, encapsulating security functionality and insulating users from changes in security technology. The un- derlying security functionality is provided by GSS-API mechanisms. We developed the Secure Remote Password GSS-API Mechanism (SRPGM) to provide a mechanism that has low infrastructure requirements, is password-based and does not require the use of long-term asymmetric keys. We provide implementations of the Java GSS-API bindings and the LIPKEY and SRPGM GSS-API mechanisms. The Secure Authentication and Security Layer (SASL) provides security to connection- based Internet protocols. After finding deficiencies in existing SASL mechanisms we de- veloped the Secure Remote Password SASL mechanism (SRP-SASL) that provides strong password-based authentication and countermeasures against known attacks, while still be- ing simple and easy to implement. We provide implementations of the Java SASL binding and several SASL mechanisms, including SRP-SASL.
- Full Text:
- Date Issued: 2000
- Authors: Burdis, Keith Robert
- Date: 2000
- Subjects: Computers -- Access control , Data protection , Computer networks -- Security measures , Electronic data processing departments -- Security measures
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4630 , http://hdl.handle.net/10962/d1006512 , Computers -- Access control , Data protection , Computer networks -- Security measures , Electronic data processing departments -- Security measures
- Description: This thesis examines distributed authentication in the process of controlling computing resources. We investigate user sign-on and two of the main authentication technologies that can be used to control a resource through authentication and providing additional security services. The problems with the existing sign-on scenario are that users have too much credential information to manage and are prompted for this information too often. Single Sign-On (SSO) is a viable solution to this problem if physical procedures are introduced to minimise the risks associated with its use. The Generic Security Services API (GSS-API) provides security services in a manner in- dependent of the environment in which these security services are used, encapsulating security functionality and insulating users from changes in security technology. The un- derlying security functionality is provided by GSS-API mechanisms. We developed the Secure Remote Password GSS-API Mechanism (SRPGM) to provide a mechanism that has low infrastructure requirements, is password-based and does not require the use of long-term asymmetric keys. We provide implementations of the Java GSS-API bindings and the LIPKEY and SRPGM GSS-API mechanisms. The Secure Authentication and Security Layer (SASL) provides security to connection- based Internet protocols. After finding deficiencies in existing SASL mechanisms we de- veloped the Secure Remote Password SASL mechanism (SRP-SASL) that provides strong password-based authentication and countermeasures against known attacks, while still be- ing simple and easy to implement. We provide implementations of the Java SASL binding and several SASL mechanisms, including SRP-SASL.
- Full Text:
- Date Issued: 2000
Towards understanding and mitigating attacks leveraging zero-day exploits
- Authors: Smit, Liam
- Date: 2019
- Subjects: Computer crimes -- Prevention , Data protection , Hacking , Computer security , Computer networks -- Security measures , Computers -- Access control , Malware (Computer software)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/115718 , vital:34218
- Description: Zero-day vulnerabilities are unknown and therefore not addressed with the result that they can be exploited by attackers to gain unauthorised system access. In order to understand and mitigate against attacks leveraging zero-days or unknown techniques, it is necessary to study the vulnerabilities, exploits and attacks that make use of them. In recent years there have been a number of leaks publishing such attacks using various methods to exploit vulnerabilities. This research seeks to understand what types of vulnerabilities exist, why and how these are exploited, and how to defend against such attacks by either mitigating the vulnerabilities or the method / process of exploiting them. By moving beyond merely remedying the vulnerabilities to defences that are able to prevent or detect the actions taken by attackers, the security of the information system will be better positioned to deal with future unknown threats. An interesting finding is how attackers exploit moving beyond the observable bounds to circumvent security defences, for example, compromising syslog servers, or going down to lower system rings to gain access. However, defenders can counter this by employing defences that are external to the system preventing attackers from disabling them or removing collected evidence after gaining system access. Attackers are able to defeat air-gaps via the leakage of electromagnetic radiation as well as misdirect attribution by planting false artefacts for forensic analysis and attacking from third party information systems. They analyse the methods of other attackers to learn new techniques. An example of this is the Umbrage project whereby malware is analysed to decide whether it should be implemented as a proof of concept. Another important finding is that attackers respect defence mechanisms such as: remote syslog (e.g. firewall), core dump files, database auditing, and Tripwire (e.g. SlyHeretic). These defences all have the potential to result in the attacker being discovered. Attackers must either negate the defence mechanism or find unprotected targets. Defenders can use technologies such as encryption to defend against interception and man-in-the-middle attacks. They can also employ honeytokens and honeypots to alarm misdirect, slow down and learn from attackers. By employing various tactics defenders are able to increase their chance of detecting and time to react to attacks, even those exploiting hitherto unknown vulnerabilities. To summarize the information presented in this thesis and to show the practical importance thereof, an examination is presented of the NSA's network intrusion of the SWIFT organisation. It shows that the firewalls were exploited with remote code execution zerodays. This attack has a striking parallel in the approach used in the recent VPNFilter malware. If nothing else, the leaks provide information to other actors on how to attack and what to avoid. However, by studying state actors, we can gain insight into what other actors with fewer resources can do in the future.
- Full Text:
- Date Issued: 2019
- Authors: Smit, Liam
- Date: 2019
- Subjects: Computer crimes -- Prevention , Data protection , Hacking , Computer security , Computer networks -- Security measures , Computers -- Access control , Malware (Computer software)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/115718 , vital:34218
- Description: Zero-day vulnerabilities are unknown and therefore not addressed with the result that they can be exploited by attackers to gain unauthorised system access. In order to understand and mitigate against attacks leveraging zero-days or unknown techniques, it is necessary to study the vulnerabilities, exploits and attacks that make use of them. In recent years there have been a number of leaks publishing such attacks using various methods to exploit vulnerabilities. This research seeks to understand what types of vulnerabilities exist, why and how these are exploited, and how to defend against such attacks by either mitigating the vulnerabilities or the method / process of exploiting them. By moving beyond merely remedying the vulnerabilities to defences that are able to prevent or detect the actions taken by attackers, the security of the information system will be better positioned to deal with future unknown threats. An interesting finding is how attackers exploit moving beyond the observable bounds to circumvent security defences, for example, compromising syslog servers, or going down to lower system rings to gain access. However, defenders can counter this by employing defences that are external to the system preventing attackers from disabling them or removing collected evidence after gaining system access. Attackers are able to defeat air-gaps via the leakage of electromagnetic radiation as well as misdirect attribution by planting false artefacts for forensic analysis and attacking from third party information systems. They analyse the methods of other attackers to learn new techniques. An example of this is the Umbrage project whereby malware is analysed to decide whether it should be implemented as a proof of concept. Another important finding is that attackers respect defence mechanisms such as: remote syslog (e.g. firewall), core dump files, database auditing, and Tripwire (e.g. SlyHeretic). These defences all have the potential to result in the attacker being discovered. Attackers must either negate the defence mechanism or find unprotected targets. Defenders can use technologies such as encryption to defend against interception and man-in-the-middle attacks. They can also employ honeytokens and honeypots to alarm misdirect, slow down and learn from attackers. By employing various tactics defenders are able to increase their chance of detecting and time to react to attacks, even those exploiting hitherto unknown vulnerabilities. To summarize the information presented in this thesis and to show the practical importance thereof, an examination is presented of the NSA's network intrusion of the SWIFT organisation. It shows that the firewalls were exploited with remote code execution zerodays. This attack has a striking parallel in the approach used in the recent VPNFilter malware. If nothing else, the leaks provide information to other actors on how to attack and what to avoid. However, by studying state actors, we can gain insight into what other actors with fewer resources can do in the future.
- Full Text:
- Date Issued: 2019
Securing software development using developer access control
- Authors: Ongers, Grant
- Date: 2020
- Subjects: Computer software -- Development , Computers -- Access control , Computer security -- Software , Computer networks -- Security measures , Source code (Computer science) , Plug-ins (Computer programs) , Data encryption (Computer science) , Network Access Control , Data Loss Prevention , Google’s BeyondCorp , Confidentiality, Integrity and Availability (CIA) triad
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/149022 , vital:38796
- Description: This research is aimed at software development companies and highlights the unique information security concerns in the context of a non-malicious software developer’s work environment; and furthermore explores an application driven solution which focuses specifically on providing developer environments with access control for source code repositories. In order to achieve that, five goals were defined as discussed in section 1.3. The application designed to provide the developer environment with access control to source code repositories was modelled on lessons taken from the principles of Network Access Control (NAC), Data Loss Prevention (DLP), and Google’s BeyondCorp (GBC) for zero-trust end-user computing. The intention of this research is to provide software developers with maximum access to source code without compromising Confidentiality, as per the Confidentiality, Integrity and Availability (CIA) triad. Employing data gleaned from examining the characteristics of DLP, NAC, and Beyond- Corp—proof-of-concept code was developed to regulate access to the developer’s environment and source code. The system required sufficient flexibility to support the diversity of software development environments. In order to achieve this, a modular design was selected. The system comprised a client side agent and a plug-in-ready server component. The client side agent mounts and dismounts encrypted volumes containing source code. Furthermore, it provides the server with information of the client that is demanded by plug-ins. The server side service provided encryption keys to facilitate the mounting of the volumes and, through plug-ins, asked questions of the client agent to determine whether access should be granted. The solution was then tested with integration and system testing. There were plans to have it used by development teams who were then to be surveyed as to their view on the proof of concept but this proved impossible. The conclusion provides a basis by which organisations that develop software can better balance the two corners of the CIA triad most often in conflict: Confidentiality in terms of their source code against the Availability of the same to developers.
- Full Text:
- Date Issued: 2020
- Authors: Ongers, Grant
- Date: 2020
- Subjects: Computer software -- Development , Computers -- Access control , Computer security -- Software , Computer networks -- Security measures , Source code (Computer science) , Plug-ins (Computer programs) , Data encryption (Computer science) , Network Access Control , Data Loss Prevention , Google’s BeyondCorp , Confidentiality, Integrity and Availability (CIA) triad
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/149022 , vital:38796
- Description: This research is aimed at software development companies and highlights the unique information security concerns in the context of a non-malicious software developer’s work environment; and furthermore explores an application driven solution which focuses specifically on providing developer environments with access control for source code repositories. In order to achieve that, five goals were defined as discussed in section 1.3. The application designed to provide the developer environment with access control to source code repositories was modelled on lessons taken from the principles of Network Access Control (NAC), Data Loss Prevention (DLP), and Google’s BeyondCorp (GBC) for zero-trust end-user computing. The intention of this research is to provide software developers with maximum access to source code without compromising Confidentiality, as per the Confidentiality, Integrity and Availability (CIA) triad. Employing data gleaned from examining the characteristics of DLP, NAC, and Beyond- Corp—proof-of-concept code was developed to regulate access to the developer’s environment and source code. The system required sufficient flexibility to support the diversity of software development environments. In order to achieve this, a modular design was selected. The system comprised a client side agent and a plug-in-ready server component. The client side agent mounts and dismounts encrypted volumes containing source code. Furthermore, it provides the server with information of the client that is demanded by plug-ins. The server side service provided encryption keys to facilitate the mounting of the volumes and, through plug-ins, asked questions of the client agent to determine whether access should be granted. The solution was then tested with integration and system testing. There were plans to have it used by development teams who were then to be surveyed as to their view on the proof of concept but this proved impossible. The conclusion provides a basis by which organisations that develop software can better balance the two corners of the CIA triad most often in conflict: Confidentiality in terms of their source code against the Availability of the same to developers.
- Full Text:
- Date Issued: 2020