Isolation, purification and characterization of a 'factor' from Fusarium oxysporum responsible for platinum nanoparticle formation
- Authors: Govender, Yageshni
- Date: 2008
- Subjects: Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3923 , http://hdl.handle.net/10962/d1003982 , Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Description: Nanoparticles are microscopic particles in the nanometre range of between 1-100 nm. A wide variety of metal nanoparticles have been found to be produced by prokaryotic and eukaryotic organisms including several fungal species, when exposed to solutions containing metal salts. Previous studies have suggested that this bioreduction of metal particles may occur via an active reductase/hydrogenase enzyme process where H2 is the electron donor and positively charged platinum species act as the electron acceptors becoming reduced to a neutral metal nanoparticle. In view of this on going research, the current study investigated the “factors” in the fungus Fusarium oxysporum which were responsible for platinum nanoparticle formation. The fungus F.oxysporum was used in this study as it has been previously shown to produce a variety of nanoparticles including gold and silver. During exposure of the biomass to H2PtCl6 the initial response to the platinum salts was metal internalisation and subsequent reduction of H2PtCI6 to produce platinum nanoparticles. The observed localization and distribution of platinum precipitates provided some evidence for a hydrogenase mediated bioreduction of platinum salts to produce nanoparticles. Factors secreted by the fungus into the extracellular fluids, were shown to be responsible for platinum nanoparticle formation. From the identification, purification and characterisation studies it was concluded that a hydrogenase and other “factors” were responsible for platinum nanoparticle formation in F.oxysporum. Purification of the hydrogenase by freeze-drying and Sephacryl S200 size exclusion- ion exchange chromatography revealed the enzyme to be a dimer with a 29.4 and 44.5 kDa when analysed by a 10 % SDS-PAGE. Characterisation of the enzyme revealed optimal activity at a pH of 7.5 and temperature of 38 °C while it exhibited a poor thermal stability with a half life of 36 minutes. The kinetic parameters Vmax and Km were 3.16 U ml-1 and 3.64 mM respectively. The purified hydrogenase was used in subsequent experiments for the reduction of platinum salts, H2PtCl6 and PtCl2. the results indicated an over 90 % reduction of the platinum salts and TEM micrographs indicated the production of platinum nanoparticles under the various experimental conditions.
- Full Text:
- Date Issued: 2008
- Authors: Govender, Yageshni
- Date: 2008
- Subjects: Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3923 , http://hdl.handle.net/10962/d1003982 , Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Description: Nanoparticles are microscopic particles in the nanometre range of between 1-100 nm. A wide variety of metal nanoparticles have been found to be produced by prokaryotic and eukaryotic organisms including several fungal species, when exposed to solutions containing metal salts. Previous studies have suggested that this bioreduction of metal particles may occur via an active reductase/hydrogenase enzyme process where H2 is the electron donor and positively charged platinum species act as the electron acceptors becoming reduced to a neutral metal nanoparticle. In view of this on going research, the current study investigated the “factors” in the fungus Fusarium oxysporum which were responsible for platinum nanoparticle formation. The fungus F.oxysporum was used in this study as it has been previously shown to produce a variety of nanoparticles including gold and silver. During exposure of the biomass to H2PtCl6 the initial response to the platinum salts was metal internalisation and subsequent reduction of H2PtCI6 to produce platinum nanoparticles. The observed localization and distribution of platinum precipitates provided some evidence for a hydrogenase mediated bioreduction of platinum salts to produce nanoparticles. Factors secreted by the fungus into the extracellular fluids, were shown to be responsible for platinum nanoparticle formation. From the identification, purification and characterisation studies it was concluded that a hydrogenase and other “factors” were responsible for platinum nanoparticle formation in F.oxysporum. Purification of the hydrogenase by freeze-drying and Sephacryl S200 size exclusion- ion exchange chromatography revealed the enzyme to be a dimer with a 29.4 and 44.5 kDa when analysed by a 10 % SDS-PAGE. Characterisation of the enzyme revealed optimal activity at a pH of 7.5 and temperature of 38 °C while it exhibited a poor thermal stability with a half life of 36 minutes. The kinetic parameters Vmax and Km were 3.16 U ml-1 and 3.64 mM respectively. The purified hydrogenase was used in subsequent experiments for the reduction of platinum salts, H2PtCl6 and PtCl2. the results indicated an over 90 % reduction of the platinum salts and TEM micrographs indicated the production of platinum nanoparticles under the various experimental conditions.
- Full Text:
- Date Issued: 2008
Development of platinum metal specific separating agents
- Authors: Jonck, Heine
- Date: 2008
- Subjects: Platinum , Platinum -- Separation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10401 , http://hdl.handle.net/10948/712 , Platinum , Platinum -- Separation
- Description: In this dissertation, the aim was to develop a platinum specific resin to be utilized for the early removal of platinum from the industrial feed solution. Efforts were therefore directed towards the syntheses of silica based resins, with active centra, designed for platinum. The large chlorometallate ions present in the feed stream, were characterized in terms of physical parameters relevant to phase distribution, namely distortability (RD), charge density, softness (σ) etc. Matching cations for each of the types were investigated. In order to attempt the design of platinum specific resins, different structural amines were used to aminate the silicone precursor and to subsequently fix these onto the silica framework. Two different solvents namely alcohol and dmf were used in this process, resulting in two sets of resins, with different properties. The design was based on previous experience with these ions, with reference to their behaviour towards different types of cations. The platinum species, PtCl6 2- and PtCl4 2-, as well as the most important contaminants in the feed stream, were typified, bearing in mind size, charge, charge density and distortability. Different types of cationic centra, having differences in charge density, stereochemical crowding and extent of hydrophobicity, were synthesized and tested-both as solvent extractants (where possible) and silica based resins. The results indicated that, partly screened secondary ammonium cationic resin species, which could be regarded as “intermediate”, proved to be satisfactory both in their high percentage extraction for PtCl4 2- and rejection of contaminants like chlororhodates, chloroiridates(III) and FeCl4 -. It was however necessary, to work at a redox potential, where iridium(IV) in the form of IrCl6 2-, was absent. Various 2-aminoalkane resins were prepared, with variation in the length of alkane group and synthesised by the two different solvents. The latter resulted in two sets of resins with not only differing compactness, but also having significantly different properties with reference to platinum specificity, HCl effect and stripping potential. The 2-aminobutane and 2-aminoheptane resins in particular, proved to be very satisfactory platinum specific resins, both with respect to selectivity, platinum capacity and stripping potential. The various physical parameters could be applied to identify the chemical behaviour of anions and assist in the development of anion specificity for the relevant species.
- Full Text:
- Date Issued: 2008
- Authors: Jonck, Heine
- Date: 2008
- Subjects: Platinum , Platinum -- Separation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10401 , http://hdl.handle.net/10948/712 , Platinum , Platinum -- Separation
- Description: In this dissertation, the aim was to develop a platinum specific resin to be utilized for the early removal of platinum from the industrial feed solution. Efforts were therefore directed towards the syntheses of silica based resins, with active centra, designed for platinum. The large chlorometallate ions present in the feed stream, were characterized in terms of physical parameters relevant to phase distribution, namely distortability (RD), charge density, softness (σ) etc. Matching cations for each of the types were investigated. In order to attempt the design of platinum specific resins, different structural amines were used to aminate the silicone precursor and to subsequently fix these onto the silica framework. Two different solvents namely alcohol and dmf were used in this process, resulting in two sets of resins, with different properties. The design was based on previous experience with these ions, with reference to their behaviour towards different types of cations. The platinum species, PtCl6 2- and PtCl4 2-, as well as the most important contaminants in the feed stream, were typified, bearing in mind size, charge, charge density and distortability. Different types of cationic centra, having differences in charge density, stereochemical crowding and extent of hydrophobicity, were synthesized and tested-both as solvent extractants (where possible) and silica based resins. The results indicated that, partly screened secondary ammonium cationic resin species, which could be regarded as “intermediate”, proved to be satisfactory both in their high percentage extraction for PtCl4 2- and rejection of contaminants like chlororhodates, chloroiridates(III) and FeCl4 -. It was however necessary, to work at a redox potential, where iridium(IV) in the form of IrCl6 2-, was absent. Various 2-aminoalkane resins were prepared, with variation in the length of alkane group and synthesised by the two different solvents. The latter resulted in two sets of resins with not only differing compactness, but also having significantly different properties with reference to platinum specificity, HCl effect and stripping potential. The 2-aminobutane and 2-aminoheptane resins in particular, proved to be very satisfactory platinum specific resins, both with respect to selectivity, platinum capacity and stripping potential. The various physical parameters could be applied to identify the chemical behaviour of anions and assist in the development of anion specificity for the relevant species.
- Full Text:
- Date Issued: 2008
- «
- ‹
- 1
- ›
- »