The androgenic and anabolic effects of pine pollen on Nile tilapia (Oreochromis niloticus)
- Authors: Abaho, Ivan
- Date: 2023-10-13
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/431615 , vital:72790
- Description: Access restricted. Expected release date in 2025 , Thesis (PhD) -- Faculty of Science, Ichthyology and Fisheries Science, 2023
- Full Text:
- Date Issued: 2023-10-13
- Authors: Abaho, Ivan
- Date: 2023-10-13
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/431615 , vital:72790
- Description: Access restricted. Expected release date in 2025 , Thesis (PhD) -- Faculty of Science, Ichthyology and Fisheries Science, 2023
- Full Text:
- Date Issued: 2023-10-13
Optical surface quality and molecular dynamics modelling of ultra-high precision optical silicon machining
- Authors: Abdulkadir, Lukman Niyi
- Date: 2019-04
- Subjects: Engineering design -- Data processing , Manufacturing processes -- Data processing , Mechatronics
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/66552 , vital:75601
- Description: Hard and brittle materials, such as silicon, silicon carbide etc., are widely used in aerospace, integrated circuit, and other fields due to their excellent physical and chemical properties. However, these materials display poor machinability owing to hardness, brittleness, non-linearity in machining process and complexities in selecting suitable machining parameters and tool geometry. These leads to low quality lenses due to subsurface damage and surface micro-crack. Additionally, it is experimentally very difficult to observe all nanoscale physical phenomena due to in-process measurement problems, inaccessible contact area of tool and workpiece, and the difficulty of surface analysis. With the use of molecular dynamics (MD) which is a comprehensive nanoscale modelling technique, proper selection of process parameters, tool geometry and online monitoring techniques, production of freeform optics is possible through Ultra-high precision diamond turning (UHPDT). Though, depending on view point, machinability in UHPDT may be in terms of tool wear rate, hardness, chip morphology, surface roughness, and other benchmarks. These situations have called for more insights, which on the long run will help to achieve high precision manufacturing with predictability, repeatability, productivity and high infrared (IR) optical quality. In this thesis, UHPDT of monocrystalline silicon at atomistic scale was conducted to investigate combined effects of edge radius, feed rate, cutting speed, depth of cut, rake and clearance angles hitherto not done so far. Using appropriate potential functions with the MD algorithm, comprehensive analysis of thermal effects, diamond tool wear, phase change, cutting forces and machining stresses (normal, shear, hydrostatic and von Mises) were carried out. Dislocation extraction algorithm (DXA) and radial distribution function (RDF) were used to evaluate dislocation nucleation, variations in bond lengths, microstructural transformation and represents structural changes in histogram form. Selected parameters for optical quality surface roughness were afterwards compared and optimized through response surface methodology (RSM) based on Box Behnken (BBD) and Taguchi L9 methods. The results indicated that, silicon atoms in the chip formation zone undergo high pressure phase transformation (HPPT) at high hydrostatic pressure and temperature.Silicon microstructure transformed from four-coordinated diamond cubic structure (Si- I) to unstable six-coordinated body-centered tetragonal structure (β-silicon) which then transformed to amorphous silicon atoms (a-Si) through amorphization. These resulted in plastic deformation and defects in the machining zone causing subsurface damage. Stress analysis indicated that the compressive stress in the machining zone (i.e. amorphous region) suppressed crack formation contributing to continuous plastic flow which is responsible for silicon ductile-mode cutting. Furthermore, formation of silicon carbide which constituted diamond wear was observed to be by sp3 - sp2 diamond carbon atom disorder and tribochemistry. The tribochemistry occurred through both multiphase and solid-state single-phase reaction between diamond tool and silicon workpiece at cutting temperatures above and below 959 K. Both the experimental findings and the simulation results reveal that, at edge radius less than uncut chip thickness, tool wear was more of rake wear than flank wear. Tool wear and kinetic friction reduced as the edge radius approached the uncut chip thickness while forces, stresses and SCE increased. When machining silicon at differentratio, silicon stress state, SCE, SSD, forces (reduced with increase in clearance angle), shear plane, chip velocity and chip ratio increased as edge radius and rake angle increased, while, kinetic friction, chip length and thickness reduced. The crystal lattice of the machined surfaces and subsurface deformed layer depth increased with increase in edge radius, feed and rake angle. Amongst all tested and analysed parameters, feed rate had the highest influence on surface quality while depth of cut showed the least. Acoustic emission was also monitored during machining and its results statistically analysed. The trends of the monitored acoustic emissions showed its capability to adequately represent and predict surface roughness results. Based on the developed simulation model a novel method for quantitative assessment of tool wear was proposed. The proposed model can be used to compare tool wear using graphitization and tribochemistry to decide the path and mode of the diamond tool wear. Finally, based on the experiment results and predictive model, a novel combination and hierarchical arrangement of the considered factors capable of suppressing tool wear and improve attainable machined surface roughness when turning hard-to-machine materials was proposed. , Thesis (D.Phil) -- Faculty of Engineering, the Built Environment, and Technology, School of Engineering, 2019
- Full Text:
- Date Issued: 2019-04
- Authors: Abdulkadir, Lukman Niyi
- Date: 2019-04
- Subjects: Engineering design -- Data processing , Manufacturing processes -- Data processing , Mechatronics
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/66552 , vital:75601
- Description: Hard and brittle materials, such as silicon, silicon carbide etc., are widely used in aerospace, integrated circuit, and other fields due to their excellent physical and chemical properties. However, these materials display poor machinability owing to hardness, brittleness, non-linearity in machining process and complexities in selecting suitable machining parameters and tool geometry. These leads to low quality lenses due to subsurface damage and surface micro-crack. Additionally, it is experimentally very difficult to observe all nanoscale physical phenomena due to in-process measurement problems, inaccessible contact area of tool and workpiece, and the difficulty of surface analysis. With the use of molecular dynamics (MD) which is a comprehensive nanoscale modelling technique, proper selection of process parameters, tool geometry and online monitoring techniques, production of freeform optics is possible through Ultra-high precision diamond turning (UHPDT). Though, depending on view point, machinability in UHPDT may be in terms of tool wear rate, hardness, chip morphology, surface roughness, and other benchmarks. These situations have called for more insights, which on the long run will help to achieve high precision manufacturing with predictability, repeatability, productivity and high infrared (IR) optical quality. In this thesis, UHPDT of monocrystalline silicon at atomistic scale was conducted to investigate combined effects of edge radius, feed rate, cutting speed, depth of cut, rake and clearance angles hitherto not done so far. Using appropriate potential functions with the MD algorithm, comprehensive analysis of thermal effects, diamond tool wear, phase change, cutting forces and machining stresses (normal, shear, hydrostatic and von Mises) were carried out. Dislocation extraction algorithm (DXA) and radial distribution function (RDF) were used to evaluate dislocation nucleation, variations in bond lengths, microstructural transformation and represents structural changes in histogram form. Selected parameters for optical quality surface roughness were afterwards compared and optimized through response surface methodology (RSM) based on Box Behnken (BBD) and Taguchi L9 methods. The results indicated that, silicon atoms in the chip formation zone undergo high pressure phase transformation (HPPT) at high hydrostatic pressure and temperature.Silicon microstructure transformed from four-coordinated diamond cubic structure (Si- I) to unstable six-coordinated body-centered tetragonal structure (β-silicon) which then transformed to amorphous silicon atoms (a-Si) through amorphization. These resulted in plastic deformation and defects in the machining zone causing subsurface damage. Stress analysis indicated that the compressive stress in the machining zone (i.e. amorphous region) suppressed crack formation contributing to continuous plastic flow which is responsible for silicon ductile-mode cutting. Furthermore, formation of silicon carbide which constituted diamond wear was observed to be by sp3 - sp2 diamond carbon atom disorder and tribochemistry. The tribochemistry occurred through both multiphase and solid-state single-phase reaction between diamond tool and silicon workpiece at cutting temperatures above and below 959 K. Both the experimental findings and the simulation results reveal that, at edge radius less than uncut chip thickness, tool wear was more of rake wear than flank wear. Tool wear and kinetic friction reduced as the edge radius approached the uncut chip thickness while forces, stresses and SCE increased. When machining silicon at differentratio, silicon stress state, SCE, SSD, forces (reduced with increase in clearance angle), shear plane, chip velocity and chip ratio increased as edge radius and rake angle increased, while, kinetic friction, chip length and thickness reduced. The crystal lattice of the machined surfaces and subsurface deformed layer depth increased with increase in edge radius, feed and rake angle. Amongst all tested and analysed parameters, feed rate had the highest influence on surface quality while depth of cut showed the least. Acoustic emission was also monitored during machining and its results statistically analysed. The trends of the monitored acoustic emissions showed its capability to adequately represent and predict surface roughness results. Based on the developed simulation model a novel method for quantitative assessment of tool wear was proposed. The proposed model can be used to compare tool wear using graphitization and tribochemistry to decide the path and mode of the diamond tool wear. Finally, based on the experiment results and predictive model, a novel combination and hierarchical arrangement of the considered factors capable of suppressing tool wear and improve attainable machined surface roughness when turning hard-to-machine materials was proposed. , Thesis (D.Phil) -- Faculty of Engineering, the Built Environment, and Technology, School of Engineering, 2019
- Full Text:
- Date Issued: 2019-04
In vitro investigation of the anti-hyperglycemic and chemical composition of Heteromorpha arborescens (Spreng.) Cham leaf extracts used in the management of diabetes mellitus
- Abifarin, Taiwo Oluwafunmilola https://orcid.org/00000003-4994-4638
- Authors: Abifarin, Taiwo Oluwafunmilola https://orcid.org/00000003-4994-4638
- Date: 2021-09
- Subjects: Diabetes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22798 , vital:52760
- Description: Diabetes mellitus is currently a major threat all over the world. It is a chronic disorder characterized by elevated blood glucose levels and disturbance in carbohydrate, fat and protein metabolism which often times leads to several complications such as, atherosclerosis, diabetic nephropathy, retinopathy and neuropathy. Due to the side effects associated with synthetic oral hypoglycemic drugs, herbal remedies have become the alternative in the management of diabetes mellitus. Heteromorpha arborescens is one of the many plants used as herbal remedies for the management of diabetes mellitus in South Africa. In addition, the roots, barks and leaves are used in other parts of Southern Africa for the treatment of mental problems, asthma, cough, dysentery and tuberculosis. The roots are fed to malnourished children in Botswana and Swaziland. However, despite the high medicinal importance, there is little or no scientificinformation to prove this claim. Therefore, the basis of this study is to determine the chemical composition as well as perform and invitro investigation of the antihyperglycemic potential of H. arborescens leaf extracts to provide information that could validate the ethno-medicinal claims for the use of this plant in the management of diabetes mellitus. Phytochemical contents and antioxidant activity of the leaf extracts were determined. Phytochemical analysis of the acetone, ethanol, aqueous and blanched extracts of H. arborescens leaves indicated that the total phenol content of the extracts ranged between 15.10 mg GAE/g- 42.50 mg QAE/g, proanthocyanidin, 459-8402.1 mg QE/g and the flavonoid content, 109.24- 235.79 mg QE/g. In addition, alkaloids (7.65percent) and saponin (25.33percent) were present in significantamounts. Based on the IC50 values, the ethanol extract exhibited the highest total antioxidant activity (0.0125 mg/mL) with highest inhibition against DPPH and ABTS radicals (0.06 and 0.049 mg/mL respectively). Relatively high antioxidant activity may be attributed to the polyphenolic contents which possess hypoglycemic potentials. Minimum Inhibitory Concentrations (MIC) of H. arborescens leaf extracts against Bacillus pumilus, Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli and Klebselia pneumoniae was also determined and results indicated considerable antibacterial activity in the acetone, ethanol and blanched extracts with MIC values ranging from 1.563-12.5 mg/mL; however, the aqueous extract was inactive against all the bacteria strains. The antibacterial activity of the leaf extracts could be advantageous against diabetic related infections. The cytotoxicity, anti-obesity and antidiabetic potentials of blanched, aqueous and ethanol extracts of Heteromorpha arborescens (Spreng.) Cham leaves were also investigated. The results revealed that both ethanol and aqueous extracts indicated considerable inhibition against α-glucosidase (IC50 of 627.29 ± 4.33 μg/mL and 576.46 ± 3.21 μg/mL respectively) while the blanched extract showed weak α- glucosidase inhibition (IC50; 855.38 ± 4.29 μg/mL). The aqueous extract showed the best α- amylase inhibition (IC50; 583.74 ± 5.87 μg/mL) among the assessed extracts. However, weak α- amylase inhibition was observed in the ethanol (IC50; 724.60 ± 4.33 μg/mL) and blanched extracts (IC50; 791.63 ± 3.76 μg/mL) of H. arborescens leaves. Some level of glucose utilization in both C3A and L6 cells was also observed for the aqueous and ethanol extracts which may be attributed to the relatively lower toxicity levels present in them, however, glucose utilization was very weak for the blanched extract, which may be due to higher level of cytotoxicity it possessed. Relatively weak lipase inhibition was observed for the ethanol (IC50; 699.3 ± 1.33 μg/mL), aqueous (IC50; 811.52 ± 3.52 μg/mL) and blanched extract (IC50; 1152.7 ± 4.61 μg/mL) as compared to orlistat (IC50; 56.88 ± 0.11 μg/mL). However, there was no reasonable reduction in lipid accumulation observed in all the extract treated cells. The results obtained suggest that H.arborescens leaf extracts can serve as a potential tool for the development of new strategies for the treatment of diabetes and obesity. However, further analysis is required to ascertain its anti- obesity potential. Also, caution should be taken in the use of the plant at high concentrations in order to ensure safety and efficacy. Analyses were also carried out to determine the nutritional and antinutritional constituents of the plant for possible inclusion in the diet of diabetic patients. Proximate analysis revealed the presence of 8.5 percent total ash, 4.92 percent crude fat, 8.41 percent moisture, 15.74 percent crude protein, 21.48 percent crude fiber, 40.95 percent carbohydrates and 271.04 kcal/100g energy value. Mineral analysis showed that H. arborescens leaves are very rich in K, Ca, and Fe. Considerable amounts of Mg, Mn, Na, P, Cu and Zn were also present. Vitamin analysis showed that the plant has a high content of vitamins A, C and E. The anti-nutrients evaluated were phytate, oxalate, saponin, and alkaloids, all of which were below toxic levels except for saponin which was observed in moderately high level. This study revealed that H. arborescens leaves are a good source of nutrients and mineral elements, (with low anti-nutrient content) that are highly beneficial to human health especially in diabetic individuals, therefore, encouraging its possible inclusion as a vegetable. Essential oil composition of fresh Heteromorphaarborescens leaves were also determined by Solvent-Free-Microwave-Extraction (SFME) and Hydrodistillation (HD) methods and the compositions of both mehods were compared in terms of their chemical compositions, yield, CO2 emission and energy consumption. Solvent Free Microwave extraction method indicated higher oil yield of 0.7 mL/200 g (0.35 percent) as compared to 0.59 mL/200 g (0.295 percent), lower energy consumption and CO2 emission as compared to the hydrodistillation method. In conclusion, H. arborescens leaves indicated considerable potential efficacy in the management for diabetes mellitus and may require further structural elucidation and characterization in order to identify the bioactive constituents. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-09
- Authors: Abifarin, Taiwo Oluwafunmilola https://orcid.org/00000003-4994-4638
- Date: 2021-09
- Subjects: Diabetes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22798 , vital:52760
- Description: Diabetes mellitus is currently a major threat all over the world. It is a chronic disorder characterized by elevated blood glucose levels and disturbance in carbohydrate, fat and protein metabolism which often times leads to several complications such as, atherosclerosis, diabetic nephropathy, retinopathy and neuropathy. Due to the side effects associated with synthetic oral hypoglycemic drugs, herbal remedies have become the alternative in the management of diabetes mellitus. Heteromorpha arborescens is one of the many plants used as herbal remedies for the management of diabetes mellitus in South Africa. In addition, the roots, barks and leaves are used in other parts of Southern Africa for the treatment of mental problems, asthma, cough, dysentery and tuberculosis. The roots are fed to malnourished children in Botswana and Swaziland. However, despite the high medicinal importance, there is little or no scientificinformation to prove this claim. Therefore, the basis of this study is to determine the chemical composition as well as perform and invitro investigation of the antihyperglycemic potential of H. arborescens leaf extracts to provide information that could validate the ethno-medicinal claims for the use of this plant in the management of diabetes mellitus. Phytochemical contents and antioxidant activity of the leaf extracts were determined. Phytochemical analysis of the acetone, ethanol, aqueous and blanched extracts of H. arborescens leaves indicated that the total phenol content of the extracts ranged between 15.10 mg GAE/g- 42.50 mg QAE/g, proanthocyanidin, 459-8402.1 mg QE/g and the flavonoid content, 109.24- 235.79 mg QE/g. In addition, alkaloids (7.65percent) and saponin (25.33percent) were present in significantamounts. Based on the IC50 values, the ethanol extract exhibited the highest total antioxidant activity (0.0125 mg/mL) with highest inhibition against DPPH and ABTS radicals (0.06 and 0.049 mg/mL respectively). Relatively high antioxidant activity may be attributed to the polyphenolic contents which possess hypoglycemic potentials. Minimum Inhibitory Concentrations (MIC) of H. arborescens leaf extracts against Bacillus pumilus, Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli and Klebselia pneumoniae was also determined and results indicated considerable antibacterial activity in the acetone, ethanol and blanched extracts with MIC values ranging from 1.563-12.5 mg/mL; however, the aqueous extract was inactive against all the bacteria strains. The antibacterial activity of the leaf extracts could be advantageous against diabetic related infections. The cytotoxicity, anti-obesity and antidiabetic potentials of blanched, aqueous and ethanol extracts of Heteromorpha arborescens (Spreng.) Cham leaves were also investigated. The results revealed that both ethanol and aqueous extracts indicated considerable inhibition against α-glucosidase (IC50 of 627.29 ± 4.33 μg/mL and 576.46 ± 3.21 μg/mL respectively) while the blanched extract showed weak α- glucosidase inhibition (IC50; 855.38 ± 4.29 μg/mL). The aqueous extract showed the best α- amylase inhibition (IC50; 583.74 ± 5.87 μg/mL) among the assessed extracts. However, weak α- amylase inhibition was observed in the ethanol (IC50; 724.60 ± 4.33 μg/mL) and blanched extracts (IC50; 791.63 ± 3.76 μg/mL) of H. arborescens leaves. Some level of glucose utilization in both C3A and L6 cells was also observed for the aqueous and ethanol extracts which may be attributed to the relatively lower toxicity levels present in them, however, glucose utilization was very weak for the blanched extract, which may be due to higher level of cytotoxicity it possessed. Relatively weak lipase inhibition was observed for the ethanol (IC50; 699.3 ± 1.33 μg/mL), aqueous (IC50; 811.52 ± 3.52 μg/mL) and blanched extract (IC50; 1152.7 ± 4.61 μg/mL) as compared to orlistat (IC50; 56.88 ± 0.11 μg/mL). However, there was no reasonable reduction in lipid accumulation observed in all the extract treated cells. The results obtained suggest that H.arborescens leaf extracts can serve as a potential tool for the development of new strategies for the treatment of diabetes and obesity. However, further analysis is required to ascertain its anti- obesity potential. Also, caution should be taken in the use of the plant at high concentrations in order to ensure safety and efficacy. Analyses were also carried out to determine the nutritional and antinutritional constituents of the plant for possible inclusion in the diet of diabetic patients. Proximate analysis revealed the presence of 8.5 percent total ash, 4.92 percent crude fat, 8.41 percent moisture, 15.74 percent crude protein, 21.48 percent crude fiber, 40.95 percent carbohydrates and 271.04 kcal/100g energy value. Mineral analysis showed that H. arborescens leaves are very rich in K, Ca, and Fe. Considerable amounts of Mg, Mn, Na, P, Cu and Zn were also present. Vitamin analysis showed that the plant has a high content of vitamins A, C and E. The anti-nutrients evaluated were phytate, oxalate, saponin, and alkaloids, all of which were below toxic levels except for saponin which was observed in moderately high level. This study revealed that H. arborescens leaves are a good source of nutrients and mineral elements, (with low anti-nutrient content) that are highly beneficial to human health especially in diabetic individuals, therefore, encouraging its possible inclusion as a vegetable. Essential oil composition of fresh Heteromorphaarborescens leaves were also determined by Solvent-Free-Microwave-Extraction (SFME) and Hydrodistillation (HD) methods and the compositions of both mehods were compared in terms of their chemical compositions, yield, CO2 emission and energy consumption. Solvent Free Microwave extraction method indicated higher oil yield of 0.7 mL/200 g (0.35 percent) as compared to 0.59 mL/200 g (0.295 percent), lower energy consumption and CO2 emission as compared to the hydrodistillation method. In conclusion, H. arborescens leaves indicated considerable potential efficacy in the management for diabetes mellitus and may require further structural elucidation and characterization in order to identify the bioactive constituents. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-09
International legal protection of women's reproductive rights: a comparative analysis of abortion laws and policies in four jurisdictions-Nigeria, Ghana, South Africa and U.S.A.
- Authors: Abiodun, Adeleke Funminiyi
- Date: 2010-10
- Subjects: Abortion -- Law and legislation , Reproductive right
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/25839 , vital:64491
- Description: The subject matter of abortion law is extremely broad and multi-disciplinary. While naturally having its basis in criminal and constitutional law of individual states, the global development of abortion discourse has been influenced by the need to protect the reproductive rights of women as a sub-set of international human rights laws; thereby advocating not only the decriminalisation of abortion but also, that individual State should take affirmative actions in promoting abortion as a right for every woman. However, that induced abortion is a punishable criminal act or a “protectable” woman’s reproductive right remains controversial due to the plethora of perspectives, beliefs and reservations held by different groups of people which are multi-dimensional and contradictory. This thesis therefore attempts a comparative study of abortion laws and policies in four jurisdictions: Nigeria and Ghana, operating criminalised abortion laws, South Africa and United States which operate liberalised/permissive abortion laws and policies. The study basically examines the legal status and reproductive rights of women to legal and safe abortion within the existing legal framework of national laws of the four selected jurisdictions vis-à-vis the legal protection offered by various international instruments on human rights. While we show that strict and restrictive abortion laws, and also, failure of States to create conditions for safe abortion constitute infractions of the reproductive rights of women, we submit further that over-liberalisation of abortion laws and policies could also amount to infringement of the basic rights of other people, thus there is need to ensure a legal and acceptable balance. The study finally acknowledges the role of international human rights laws in the protection of women’s right to legal and safe abortion but asserts that there can be no universally acceptable morality to which the whole world could subsume in term of women’s right to abortion due to the interplay of socio-cultural, religious, and moral affiliations of the people in different communities. , Thesis (LLD) -- Faculty of Law, 2010
- Full Text:
- Date Issued: 2010-10
- Authors: Abiodun, Adeleke Funminiyi
- Date: 2010-10
- Subjects: Abortion -- Law and legislation , Reproductive right
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/25839 , vital:64491
- Description: The subject matter of abortion law is extremely broad and multi-disciplinary. While naturally having its basis in criminal and constitutional law of individual states, the global development of abortion discourse has been influenced by the need to protect the reproductive rights of women as a sub-set of international human rights laws; thereby advocating not only the decriminalisation of abortion but also, that individual State should take affirmative actions in promoting abortion as a right for every woman. However, that induced abortion is a punishable criminal act or a “protectable” woman’s reproductive right remains controversial due to the plethora of perspectives, beliefs and reservations held by different groups of people which are multi-dimensional and contradictory. This thesis therefore attempts a comparative study of abortion laws and policies in four jurisdictions: Nigeria and Ghana, operating criminalised abortion laws, South Africa and United States which operate liberalised/permissive abortion laws and policies. The study basically examines the legal status and reproductive rights of women to legal and safe abortion within the existing legal framework of national laws of the four selected jurisdictions vis-à-vis the legal protection offered by various international instruments on human rights. While we show that strict and restrictive abortion laws, and also, failure of States to create conditions for safe abortion constitute infractions of the reproductive rights of women, we submit further that over-liberalisation of abortion laws and policies could also amount to infringement of the basic rights of other people, thus there is need to ensure a legal and acceptable balance. The study finally acknowledges the role of international human rights laws in the protection of women’s right to legal and safe abortion but asserts that there can be no universally acceptable morality to which the whole world could subsume in term of women’s right to abortion due to the interplay of socio-cultural, religious, and moral affiliations of the people in different communities. , Thesis (LLD) -- Faculty of Law, 2010
- Full Text:
- Date Issued: 2010-10
An exploration into an ESD-based teaching strategy to improve the critical thinking and problem-solving skills amongst development studies students at Nelson Mandela University
- Authors: Abrahams, Andre John
- Date: 2021-04
- Subjects: Sustainable development -- Study and teaching , Universities and colleges -- South Africa , Critical thinking
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/50906 , vital:43149
- Description: In recent years, Education for Sustainable Development (ESD) has been a significant focus for research pertaining to teacher education and transformative approaches to teaching and learning. However, there has been less specific focus on the implementation of ESD in the context of higher education. This study, therefore, explored the use of an ESD-based teaching and learning approach in an undergraduate Development Studies programme. The focus was on developing a teaching approach that was informed by the principles of ESD and which could assist Development Studies lecturers in creating a more transformative, student-centred environment. This study was a qualitative undertaking, conducted at the Nelson Mandela University’s (NMU) Development Studies undergraduate programme. The ESD-based approach was implemented by two participating lecturers who utilised the approach across four undergraduate classes. Qualitative data were generated through a systematic literature analysis (SLA), exploratory interviews, student exercises and assessments, focus group discussions, and reflective journal entries. The gathered data were then analysed using a framework analysis rubric adapted from the theoretical framework utilised in the study. In addition, the data were coded using the six coding techniques promoted by Saldaña (2013). The findings suggest that the ESD-based approach developed in the study could effectively contribute towards promoting ESD in the Development Studies programme. The findings also suggest that, when properly implemented, the ESD-based approach could assist lecturers in creating a more transformative learning environment where students have greater control over their learning experience. In addition, this study found that students in the selected Development Studies undergraduate programme could benefit from continued exposure to the teaching methods and techniques adopted in the approach. The implementation of the approach also uncovered some of the inhibiting factors that may prevent an ESD-based approach being mainstreamed into the context of higher education. , Thesis (DPhil) -- Faculty of Business and Economic Sciences, Development Studies, 2021
- Full Text:
- Date Issued: 2021-04
- Authors: Abrahams, Andre John
- Date: 2021-04
- Subjects: Sustainable development -- Study and teaching , Universities and colleges -- South Africa , Critical thinking
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/50906 , vital:43149
- Description: In recent years, Education for Sustainable Development (ESD) has been a significant focus for research pertaining to teacher education and transformative approaches to teaching and learning. However, there has been less specific focus on the implementation of ESD in the context of higher education. This study, therefore, explored the use of an ESD-based teaching and learning approach in an undergraduate Development Studies programme. The focus was on developing a teaching approach that was informed by the principles of ESD and which could assist Development Studies lecturers in creating a more transformative, student-centred environment. This study was a qualitative undertaking, conducted at the Nelson Mandela University’s (NMU) Development Studies undergraduate programme. The ESD-based approach was implemented by two participating lecturers who utilised the approach across four undergraduate classes. Qualitative data were generated through a systematic literature analysis (SLA), exploratory interviews, student exercises and assessments, focus group discussions, and reflective journal entries. The gathered data were then analysed using a framework analysis rubric adapted from the theoretical framework utilised in the study. In addition, the data were coded using the six coding techniques promoted by Saldaña (2013). The findings suggest that the ESD-based approach developed in the study could effectively contribute towards promoting ESD in the Development Studies programme. The findings also suggest that, when properly implemented, the ESD-based approach could assist lecturers in creating a more transformative learning environment where students have greater control over their learning experience. In addition, this study found that students in the selected Development Studies undergraduate programme could benefit from continued exposure to the teaching methods and techniques adopted in the approach. The implementation of the approach also uncovered some of the inhibiting factors that may prevent an ESD-based approach being mainstreamed into the context of higher education. , Thesis (DPhil) -- Faculty of Business and Economic Sciences, Development Studies, 2021
- Full Text:
- Date Issued: 2021-04
An exploration into an ESD-based teaching strategy to improve the critical thinking and problem-solving skills amongst development studies students at Nelson Mandela University
- Authors: Abrahams, André John
- Date: 2021-04
- Subjects: Problem solving -- Study and teaching , Divergent thinking -- Study and teaching , Sustainable development -- Study and teaching , Environmental education
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/50907 , vital:43148
- Description: In recent years, Education for Sustainable Development (ESD) has been a significant focus for research pertaining to teacher education and transformative approaches to teaching and learning. However, there has been less specific focus on the implementation of ESD in the context of higher education. This study, therefore, explored the use of an ESD-based teaching and learning approach in an undergraduate Development Studies programme. The focus was on developing a teaching approach that was informed by the principles of ESD and which could assist Development Studies lecturers in creating a more transformative, student-centred environment. This study was a qualitative undertaking, conducted at the Nelson Mandela University’s (NMU) Development Studies undergraduate programme. The ESD-based approach was implemented by two participating lecturers who utilised the approach across four undergraduate classes. Qualitative data were generated through a systematic literature analysis (SLA), exploratory interviews, student exercises and assessments, focus group discussions, and reflective journal entries. The gathered data were then analysed using a framework analysis rubric adapted from the theoretical framework utilised in the study. In addition, the data were coded using the six coding techniques promoted by Saldaña (2013). The findings suggest that the ESD-based approach developed in the study could effectively contribute towards promoting ESD in the Development Studies programme. The findings also suggest that, when properly implemented, the ESD-based approach could assist lecturers in creating a more transformative learning environment where students have greater control over their learning experience. In addition, this study found that students in the selected Development Studies undergraduate programme could benefit from continued exposure to the teaching methods and techniques adopted in the approach. The implementation of the approach also uncovered some of the inhibiting factors that may prevent an ESD-based approach being mainstreamed into the context of higher education. , Thesis (DPhil) -- Faculty of Business and Economic Sciences, Development Studies, 2021
- Full Text:
- Date Issued: 2021-04
- Authors: Abrahams, André John
- Date: 2021-04
- Subjects: Problem solving -- Study and teaching , Divergent thinking -- Study and teaching , Sustainable development -- Study and teaching , Environmental education
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10948/50907 , vital:43148
- Description: In recent years, Education for Sustainable Development (ESD) has been a significant focus for research pertaining to teacher education and transformative approaches to teaching and learning. However, there has been less specific focus on the implementation of ESD in the context of higher education. This study, therefore, explored the use of an ESD-based teaching and learning approach in an undergraduate Development Studies programme. The focus was on developing a teaching approach that was informed by the principles of ESD and which could assist Development Studies lecturers in creating a more transformative, student-centred environment. This study was a qualitative undertaking, conducted at the Nelson Mandela University’s (NMU) Development Studies undergraduate programme. The ESD-based approach was implemented by two participating lecturers who utilised the approach across four undergraduate classes. Qualitative data were generated through a systematic literature analysis (SLA), exploratory interviews, student exercises and assessments, focus group discussions, and reflective journal entries. The gathered data were then analysed using a framework analysis rubric adapted from the theoretical framework utilised in the study. In addition, the data were coded using the six coding techniques promoted by Saldaña (2013). The findings suggest that the ESD-based approach developed in the study could effectively contribute towards promoting ESD in the Development Studies programme. The findings also suggest that, when properly implemented, the ESD-based approach could assist lecturers in creating a more transformative learning environment where students have greater control over their learning experience. In addition, this study found that students in the selected Development Studies undergraduate programme could benefit from continued exposure to the teaching methods and techniques adopted in the approach. The implementation of the approach also uncovered some of the inhibiting factors that may prevent an ESD-based approach being mainstreamed into the context of higher education. , Thesis (DPhil) -- Faculty of Business and Economic Sciences, Development Studies, 2021
- Full Text:
- Date Issued: 2021-04
A social realist analysis of the professional identity formation of lecturers emerging from completing professional development at a South African research-intensive university
- Authors: Adams, Anthea
- Date: 2024-10-11
- Subjects: Identity (Psychology) in education , Academic development , Staff development , Social realism , Critical realism , Scholarship of teaching and learning , Education, Higher South Africa
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/466372 , vital:76722 , DOI https://doi.org/10.21504/10962/466372
- Description: This doctoral study is part of a Department of Higher Education and Training (DHET) capacity development project, Phakamisa. Using Margaret Archer's Social Realism as a substantive theory and methodological tool and Roy Bhaskar's Critical Realism as a meta-theory, I was able to identify and explain the interplay between the structural, cultural and agential mechanisms within a professional development course that enabled or constrained the emergence of lecturers' professional academic identities. My research participants are fourteen lecturers who completed the Postgraduate Diploma in Higher Education (PGDip HE) at Rhodes University between 2007 and 2017. Social Realism's explanatory methodologies, analytical dualism, and the morphogenetic cycle allowed me to provide causal explanations and account for the historicity of the emergence of lecturers' professional academic identities as teachers. A qualitative research design involving case study research allowed me to search for generative mechanisms to understand and explain the conditioning influence of often unobservable phenomena and underlying mechanisms in developing lecturers' identities as teachers in a research-intensive university. As strong social actors imbued with power and material resources, university leadership should consider the constraining influence of contextual conditions, such as the hegemony of disciplinary research versus research in the Scholarship of Teaching and Learning (SoTL). The socio-cultural (S-C) interactions of the fourteen lecturers (agents) signal the possibilities for structural, cultural and agential morphogenesis when agents choose to exercise their agency, i.e., their personal emergent properties (PEPs) to mediate prevalent structural and cultural emergent properties (SEPs and CEPs) enabling or constraining their personal projects. Lecturers' personal projects are the courses of action they intentionally engage in as they strive to establish sustainable yet evolving practices as teachers in their disciplines. This thesis shows that exercising their PEPs involves subjective reflexivity and transforming from primary agents to corporate agents due to collective action and alliances with like-minded peers and colleagues to shape the teaching and learning agenda in their respective departments and the broader higher education context. Triple morphogenesis of lecturers' agency occurred through their realisation as social actors. It signified the formation of their professional identities as teachers and how they uniquely embodied and enacted their teacher roles. , Hierdie doktorale studie is deel van 'n Departement van Hoër Onderwys en Opleiding (DHOO) kapasiteitsontwikkelingsprojek, naamlik Phakamisa. Deur gebruik te maak van Margaret Archer se Sosiale Realisme ("Social Realism") as 'n substantiewe teorie en metodologiese instrument, en Roy Bhaskar se Kritiese Realisme ("Critical Realism") as 'n metateorie, was ek in staat om die wisselwerking tussen die strukturele, kulturele en agentiese meganismes binne 'n professionele ontwikkelingskursus te identifiseer en te verduidelik wat die ontstaan van dosente se professionele akademiese identiteite moontlik gemaak of beperk het. Die deelnemers in my navorsing is veertien dosente wat die Nagraadse Diploma in Hoër Onderwys (NGDip HO) aan Rhodes Universiteit tussen 2007 en 2017 voltooi het. Sosiale Realisme se verklarende metodologieë, analitiese dualisme en die morfogenetiese siklus het my toegelaat om oorsaaklike verklarings te verskaf en die historisiteit van die ontstaan van dosente se professionele akademiese identiteite as onderwysers te verantwoord. ’n Kwalitatiewe navorsingsontwerp wat gevallestudienavorsing behels het, het my toegelaat om na generatiewe meganismes te soek om die kondisionerende invloed van dikwels onwaarneembare verskynsels en onderliggende meganismes in die ontwikkeling van dosente se identiteit as onderwysers in ’n navorsingsintensiewe universiteit te verstaan en te verduidelik. As sterk sosiale rolspelers deurdrenk met mag en materiële hulpbronne, behoort universiteitsleierskap die beperkende invloed van kontekstuele toestande, soos die hegemonie van dissiplinêre navorsing versus navorsing in die Akademieskap van Onderrig en Leer (AvOL, of in Engels "Scholarship of Teaching and Learning", afgekort na SoTL) in ag te neem. Die sosiokulturele (S-K) interaksie van die veertien dosente (agente) dui op die moontlikhede vir strukturele, kulturele en agentiale morfogenese wanneer agente doelbewus kies om hul agentskap uit te oefen, dit wil sê hul persoonlike ontluikende eienskappe (in Engels "personal emergent properties", afgekort na PEPs) om heersende strukturele en kulturele ontluikende eienskappe te bemiddel (in Engels "cultural emergent properties", afgekort na CEPs) wat hul persoonlike projekte moontlik maak of beperk. Dosente se persoonlike projekte is die aksies wat hulle doelbewus aangepak het terwyl hulle daarna gestreef het om volhoubare dog ontwikkelende praktyke as onderwysers in hul dissiplines te vestig. Hierdie tesis dui aan dat die uitoefening van hul persoonlike ontluikende eienskappe ("PEPs") behels subjektiewe refleksiwiteit en transformasie van primêre agente na korporatiewe agente as gevolg van kollektiewe optrede en alliansies met eendersdenkende eweknieë en kollegas om die onderrigen leeragenda in hul onderskeie departemente en die breër hoëronderwyskonteks te beïnvloed. Drievoudige morfogenese van dosente se agentskap het plaasgevind deur hul verwesenliking as sosiale rolspelers. Dit het die vorming van hul professionele identiteite as onderwysers aangedui en die unieke manier hoe hulle hul onderwyserrolle interpreteer en uitleef. , Thesis (PhD) -- Faculty of Education, Centre for Higher Education Research, Teaching and Learning, 2024
- Full Text:
- Date Issued: 2024-10-11
- Authors: Adams, Anthea
- Date: 2024-10-11
- Subjects: Identity (Psychology) in education , Academic development , Staff development , Social realism , Critical realism , Scholarship of teaching and learning , Education, Higher South Africa
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/466372 , vital:76722 , DOI https://doi.org/10.21504/10962/466372
- Description: This doctoral study is part of a Department of Higher Education and Training (DHET) capacity development project, Phakamisa. Using Margaret Archer's Social Realism as a substantive theory and methodological tool and Roy Bhaskar's Critical Realism as a meta-theory, I was able to identify and explain the interplay between the structural, cultural and agential mechanisms within a professional development course that enabled or constrained the emergence of lecturers' professional academic identities. My research participants are fourteen lecturers who completed the Postgraduate Diploma in Higher Education (PGDip HE) at Rhodes University between 2007 and 2017. Social Realism's explanatory methodologies, analytical dualism, and the morphogenetic cycle allowed me to provide causal explanations and account for the historicity of the emergence of lecturers' professional academic identities as teachers. A qualitative research design involving case study research allowed me to search for generative mechanisms to understand and explain the conditioning influence of often unobservable phenomena and underlying mechanisms in developing lecturers' identities as teachers in a research-intensive university. As strong social actors imbued with power and material resources, university leadership should consider the constraining influence of contextual conditions, such as the hegemony of disciplinary research versus research in the Scholarship of Teaching and Learning (SoTL). The socio-cultural (S-C) interactions of the fourteen lecturers (agents) signal the possibilities for structural, cultural and agential morphogenesis when agents choose to exercise their agency, i.e., their personal emergent properties (PEPs) to mediate prevalent structural and cultural emergent properties (SEPs and CEPs) enabling or constraining their personal projects. Lecturers' personal projects are the courses of action they intentionally engage in as they strive to establish sustainable yet evolving practices as teachers in their disciplines. This thesis shows that exercising their PEPs involves subjective reflexivity and transforming from primary agents to corporate agents due to collective action and alliances with like-minded peers and colleagues to shape the teaching and learning agenda in their respective departments and the broader higher education context. Triple morphogenesis of lecturers' agency occurred through their realisation as social actors. It signified the formation of their professional identities as teachers and how they uniquely embodied and enacted their teacher roles. , Hierdie doktorale studie is deel van 'n Departement van Hoër Onderwys en Opleiding (DHOO) kapasiteitsontwikkelingsprojek, naamlik Phakamisa. Deur gebruik te maak van Margaret Archer se Sosiale Realisme ("Social Realism") as 'n substantiewe teorie en metodologiese instrument, en Roy Bhaskar se Kritiese Realisme ("Critical Realism") as 'n metateorie, was ek in staat om die wisselwerking tussen die strukturele, kulturele en agentiese meganismes binne 'n professionele ontwikkelingskursus te identifiseer en te verduidelik wat die ontstaan van dosente se professionele akademiese identiteite moontlik gemaak of beperk het. Die deelnemers in my navorsing is veertien dosente wat die Nagraadse Diploma in Hoër Onderwys (NGDip HO) aan Rhodes Universiteit tussen 2007 en 2017 voltooi het. Sosiale Realisme se verklarende metodologieë, analitiese dualisme en die morfogenetiese siklus het my toegelaat om oorsaaklike verklarings te verskaf en die historisiteit van die ontstaan van dosente se professionele akademiese identiteite as onderwysers te verantwoord. ’n Kwalitatiewe navorsingsontwerp wat gevallestudienavorsing behels het, het my toegelaat om na generatiewe meganismes te soek om die kondisionerende invloed van dikwels onwaarneembare verskynsels en onderliggende meganismes in die ontwikkeling van dosente se identiteit as onderwysers in ’n navorsingsintensiewe universiteit te verstaan en te verduidelik. As sterk sosiale rolspelers deurdrenk met mag en materiële hulpbronne, behoort universiteitsleierskap die beperkende invloed van kontekstuele toestande, soos die hegemonie van dissiplinêre navorsing versus navorsing in die Akademieskap van Onderrig en Leer (AvOL, of in Engels "Scholarship of Teaching and Learning", afgekort na SoTL) in ag te neem. Die sosiokulturele (S-K) interaksie van die veertien dosente (agente) dui op die moontlikhede vir strukturele, kulturele en agentiale morfogenese wanneer agente doelbewus kies om hul agentskap uit te oefen, dit wil sê hul persoonlike ontluikende eienskappe (in Engels "personal emergent properties", afgekort na PEPs) om heersende strukturele en kulturele ontluikende eienskappe te bemiddel (in Engels "cultural emergent properties", afgekort na CEPs) wat hul persoonlike projekte moontlik maak of beperk. Dosente se persoonlike projekte is die aksies wat hulle doelbewus aangepak het terwyl hulle daarna gestreef het om volhoubare dog ontwikkelende praktyke as onderwysers in hul dissiplines te vestig. Hierdie tesis dui aan dat die uitoefening van hul persoonlike ontluikende eienskappe ("PEPs") behels subjektiewe refleksiwiteit en transformasie van primêre agente na korporatiewe agente as gevolg van kollektiewe optrede en alliansies met eendersdenkende eweknieë en kollegas om die onderrigen leeragenda in hul onderskeie departemente en die breër hoëronderwyskonteks te beïnvloed. Drievoudige morfogenese van dosente se agentskap het plaasgevind deur hul verwesenliking as sosiale rolspelers. Dit het die vorming van hul professionele identiteite as onderwysers aangedui en die unieke manier hoe hulle hul onderwyserrolle interpreteer en uitleef. , Thesis (PhD) -- Faculty of Education, Centre for Higher Education Research, Teaching and Learning, 2024
- Full Text:
- Date Issued: 2024-10-11
Cultivation, nutritional and pharmacological evaluation of Celosia argentea (L) Kuntze: an endangered wild vegetable in the Eastern Cape Province of South Africa
- Adegbaju, Oluwafunmilayo Dorcas
- Authors: Adegbaju, Oluwafunmilayo Dorcas
- Date: 2019-09
- Subjects: Celosia , Edible greens
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19806 , vital:43250
- Description: Green leafy vegetables are important in human nutrition, but their cultivation is limited to a few staple ones. These vegetables possess high nutritious and therapeutic properties that could help in achieving nutritional security and alleviating the burden of some diseases. A typical example is Celosia argentea, which in South Africa, is little known and grossly under-utilized despite its numerous nutritional and pharmacological values. The present study investigated the cultivation, nutritional and pharmacological potentials of C. argentea at three stages of maturity of two trials. Evaluation of cultivation in the greenhouse towards possible domestication of C. argentea included seed viability test, seed germination under varying temperatures (5, 10, 15, 20 25 30, 35, 40°C), light conditions (continuous light, continuous darkness, alternating light and dark (12h light/12 dark photoperiod) and sowing depths (0, 1, 2, 3, 4 and 5cm). The nutritional evaluation assessed the proximal, mineral, vitamins and antinutrient content of the plant; while pharmacological potentials of C. argentea were evaluated by investigating the ultramorphology, phytochemical content, anti-oxidant, antimicrobial, toxicity and cell-based anti-inflammatory properties of the plant at different stages of growth. Germination experiment revealed that optimum seed germination requirements for C. argentea were 25°C, alternating light and dark regime and a sowing depth of 1cm. Microrphological assessment of C. argentea revealed that the leaves were amphistomatic; with the abaxial surface having higher stomata density. Characteristic, distinguishing protuberances were observed at the polar ends of the stomata on the adaxial surface of the plant epidermis, and the major elements on the foliar epidermis were beryllium, carbon, oxygen and potassium; while pigmentation and colouration, showing localization of bioactive compounds were mostly at the site where trichomes were abundant. Growth parameters and yield potential (plant height, stem girth, leaf area, number of leaves, number of branches, number of days to flowering, number of flowers as well as dry and fresh weight) of C. argentea showed that for agricultural practices on the field, increase in growth parameters should be expected around 4-5 weeks after transplanting while higher yield should be expected around 7-9 weeks after transplanting. The results encouraged cultivation during summer or late spring for best farm management. Proximal, mineral, vitamins and anti-nutrients content of C. argentea at three different maturity stages of two trials were performed using AOAC, ALASA and inductively coupled plasma-optical emission spectrometer techniques. Results revealed that the pre-flowering stage of growth had the highest ash (28.15± 0.10 percent) and crude protein (25.80 ± 0.20 percent) contents. While post-flowering stage had the highest carbohydrate (28.51± 0.20 percent and 36.16± 0.22 percent), crude fibre (33.41± 0.87 percent) and energy (435.28± 27.6 percent) with low fat and moisture (8.43± 0.15 percent and 6.35±0.09 percent) contents respectively; while no marked demarcation in most mineral contents in all the growth stages was observed. Zinc was highest at the flowering stage of growth, while vitamin contents decreased as the plant approached maturation. Antinutrients content of the plant was not dependent on growth stage. Total phenols, flavonoids and proanthocyanidin content of C. argentea were evaluated colourimetrically, while the antioxidant potency of the aqueous, acetone and methanolic extracts was measured using 2,2 diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), Ferric reducing antioxidant power (FRAP) and total antioxidant capacity (TAC) models. All the solvent extracts of the flowering stage had the highest total phenolic (80.75±4.21GAE/g), flavonoids (946.19±7.87QE/mg) and proanthocyanidin contents (100.90±1.29 CE/g); with the acetone extracts showing significantly higher phytochemical content. The flowering stage exhibited the best radical inhibitory activity, with the methanol extract having the highest scavenging power for ABTS and DPPH radicals, while acetone extract showed the highest inhibition against FRAP and highest total antioxidant capacity. The antimicrobial potential of the aqueous acetone and methanolic extracts of C. argentea evaluated using agar dilution method against six bacteria (Klebsiella pneumonia, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Bacillus cereus) and four fungal strains (Candida glabarata, Candida albicans and Penicillium aurantiogriseum and Penicillium chrysogenum) showed that Streptococcus pyrogenes and P. aeruginosa were susceptible to the methanol extracts of all the growing phases of both trials at 10 mg/mL; while Klebsiella pneumoniae was susceptible at 10 mg/mL to only the methanol post-flowering extracts of both trials. C. albicans and P. aurantiogriseum were highly susceptible to all the extracts. Possible toxicity evaluated using brine shrimp lethality assay and calculation of LC50 against brine shrimp nauplii revealed that C. argentea was not toxic at any stage of maturity at all concentrations evaluated. Anti-inflammatory activities and cytotoxicity of C. argentea extracts evaluated using RAW 264.7 macrophages and 3T3-L1 cell lines revealed that the acetone extract of the flowering stage had moderate anti-inflammatory activity with no significant toxicity against activated macrophages. Findings from this study indicate that C. argentea is a safe functional leafy vegetable of high nutritional and pharmacological importance which can easily be cultivated and domesticated in South Africa. This could significantly alleviate the burden of micronutrient deficiencies among pre-school children in rural communities. , Thesis (PhD) (Botany) -- University of Fort Hare, 2019
- Full Text:
- Date Issued: 2019-09
- Authors: Adegbaju, Oluwafunmilayo Dorcas
- Date: 2019-09
- Subjects: Celosia , Edible greens
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19806 , vital:43250
- Description: Green leafy vegetables are important in human nutrition, but their cultivation is limited to a few staple ones. These vegetables possess high nutritious and therapeutic properties that could help in achieving nutritional security and alleviating the burden of some diseases. A typical example is Celosia argentea, which in South Africa, is little known and grossly under-utilized despite its numerous nutritional and pharmacological values. The present study investigated the cultivation, nutritional and pharmacological potentials of C. argentea at three stages of maturity of two trials. Evaluation of cultivation in the greenhouse towards possible domestication of C. argentea included seed viability test, seed germination under varying temperatures (5, 10, 15, 20 25 30, 35, 40°C), light conditions (continuous light, continuous darkness, alternating light and dark (12h light/12 dark photoperiod) and sowing depths (0, 1, 2, 3, 4 and 5cm). The nutritional evaluation assessed the proximal, mineral, vitamins and antinutrient content of the plant; while pharmacological potentials of C. argentea were evaluated by investigating the ultramorphology, phytochemical content, anti-oxidant, antimicrobial, toxicity and cell-based anti-inflammatory properties of the plant at different stages of growth. Germination experiment revealed that optimum seed germination requirements for C. argentea were 25°C, alternating light and dark regime and a sowing depth of 1cm. Microrphological assessment of C. argentea revealed that the leaves were amphistomatic; with the abaxial surface having higher stomata density. Characteristic, distinguishing protuberances were observed at the polar ends of the stomata on the adaxial surface of the plant epidermis, and the major elements on the foliar epidermis were beryllium, carbon, oxygen and potassium; while pigmentation and colouration, showing localization of bioactive compounds were mostly at the site where trichomes were abundant. Growth parameters and yield potential (plant height, stem girth, leaf area, number of leaves, number of branches, number of days to flowering, number of flowers as well as dry and fresh weight) of C. argentea showed that for agricultural practices on the field, increase in growth parameters should be expected around 4-5 weeks after transplanting while higher yield should be expected around 7-9 weeks after transplanting. The results encouraged cultivation during summer or late spring for best farm management. Proximal, mineral, vitamins and anti-nutrients content of C. argentea at three different maturity stages of two trials were performed using AOAC, ALASA and inductively coupled plasma-optical emission spectrometer techniques. Results revealed that the pre-flowering stage of growth had the highest ash (28.15± 0.10 percent) and crude protein (25.80 ± 0.20 percent) contents. While post-flowering stage had the highest carbohydrate (28.51± 0.20 percent and 36.16± 0.22 percent), crude fibre (33.41± 0.87 percent) and energy (435.28± 27.6 percent) with low fat and moisture (8.43± 0.15 percent and 6.35±0.09 percent) contents respectively; while no marked demarcation in most mineral contents in all the growth stages was observed. Zinc was highest at the flowering stage of growth, while vitamin contents decreased as the plant approached maturation. Antinutrients content of the plant was not dependent on growth stage. Total phenols, flavonoids and proanthocyanidin content of C. argentea were evaluated colourimetrically, while the antioxidant potency of the aqueous, acetone and methanolic extracts was measured using 2,2 diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), Ferric reducing antioxidant power (FRAP) and total antioxidant capacity (TAC) models. All the solvent extracts of the flowering stage had the highest total phenolic (80.75±4.21GAE/g), flavonoids (946.19±7.87QE/mg) and proanthocyanidin contents (100.90±1.29 CE/g); with the acetone extracts showing significantly higher phytochemical content. The flowering stage exhibited the best radical inhibitory activity, with the methanol extract having the highest scavenging power for ABTS and DPPH radicals, while acetone extract showed the highest inhibition against FRAP and highest total antioxidant capacity. The antimicrobial potential of the aqueous acetone and methanolic extracts of C. argentea evaluated using agar dilution method against six bacteria (Klebsiella pneumonia, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Bacillus cereus) and four fungal strains (Candida glabarata, Candida albicans and Penicillium aurantiogriseum and Penicillium chrysogenum) showed that Streptococcus pyrogenes and P. aeruginosa were susceptible to the methanol extracts of all the growing phases of both trials at 10 mg/mL; while Klebsiella pneumoniae was susceptible at 10 mg/mL to only the methanol post-flowering extracts of both trials. C. albicans and P. aurantiogriseum were highly susceptible to all the extracts. Possible toxicity evaluated using brine shrimp lethality assay and calculation of LC50 against brine shrimp nauplii revealed that C. argentea was not toxic at any stage of maturity at all concentrations evaluated. Anti-inflammatory activities and cytotoxicity of C. argentea extracts evaluated using RAW 264.7 macrophages and 3T3-L1 cell lines revealed that the acetone extract of the flowering stage had moderate anti-inflammatory activity with no significant toxicity against activated macrophages. Findings from this study indicate that C. argentea is a safe functional leafy vegetable of high nutritional and pharmacological importance which can easily be cultivated and domesticated in South Africa. This could significantly alleviate the burden of micronutrient deficiencies among pre-school children in rural communities. , Thesis (PhD) (Botany) -- University of Fort Hare, 2019
- Full Text:
- Date Issued: 2019-09
Functionalized Ru(II) polypyridines and phthalocyanines: Potential dyes for dye-sensitized solar cells(DSSCs)
- Adeloye, Adewale Olufunsho https://orcid.org/0000-0003-1736-5738
- Authors: Adeloye, Adewale Olufunsho https://orcid.org/0000-0003-1736-5738
- Date: 2011-01
- Subjects: Phthalocyanines , Dye-sensitized solar cells
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/24365 , vital:62645
- Description: This study describes the design, synthesis, characterization and preliminary investigation of the solar-to-electrical energy conversion efficiency of ruthenium(II) functionalized polypyridine and phthalocyanine complexes with extended π-conjugation. Polypyridinyl functionalized with anthracene, 2,3-dimethylacrylic acid and 1-methoxy-1-buten-3-yne were synthesized and characterized by infrared, UV-Vis, photoluminescence, 1H and 13C NMR and elemental analysis. The functionalized polypyridine molecules were used to synthesize various ruthenium(II) homoleptic/heteroleptic and/or heteronuclear complexes and their photophysical and electrochemical properties evaluated. The preliminary results of the solar-to-electrical conversion efficiencies of some synthesized Ru(II) polypyridyl complexes were presented in chapter 5. It was found out as expected that the ruthenium(II) polypyridine complexes containing either heteronuclear polypyridine ligands or their thiocyanate analogues of the types [Ru(L1)2L2(PF6)2], [RuL1(L2)2(PF6)2] and [RuL1L2(NCS)2], showed better photophysical properties (red-shifted metal-to-ligand charge-transfer (MLCT) transitions concomitant with enhanced molar extinction coefficients), luminescence and interesting electrochemical redox properties than those containing homonuclear ligand types [Ru(L1)3(PF6)2]. The ruthenium(II) anthracenyl functionalized phthalocyanine complexes which were obtained by electrophilic aromatic substitution reactions in the peripheral positions gave good solubility properties in various organic solvents and also showed interesting near infrared absorption and electroredox characteristics. Cyclic and square wave voltammetries of these complexes revealed major redox processes and the numbers of electron(s) transfer were determined by chronocoulometry. It was established that a mono- and/or multi-electronic transfer reactions can occur in the various ruthenium(II) complexes. The photophysical properties of some complexes showed them to be better and promising candidates in the design of chemosensors, organic light emitting diodes (OLEDs) and as photosensitizers, while their redox-active natures make them potential mediators in electron-transfer for various photochemical processes. However, due to low surface concentration and/or adsorption of some tested complexes on TiO2 semiconductor nanocrystalline particle, low currents were generated and the highest solar-to- electrical conversion efficiency recorded in this study was 0.10 percent. , Thesis (PhD) -- Faculty of Science and Agriculture, 2011
- Full Text:
- Date Issued: 2011-01
- Authors: Adeloye, Adewale Olufunsho https://orcid.org/0000-0003-1736-5738
- Date: 2011-01
- Subjects: Phthalocyanines , Dye-sensitized solar cells
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/24365 , vital:62645
- Description: This study describes the design, synthesis, characterization and preliminary investigation of the solar-to-electrical energy conversion efficiency of ruthenium(II) functionalized polypyridine and phthalocyanine complexes with extended π-conjugation. Polypyridinyl functionalized with anthracene, 2,3-dimethylacrylic acid and 1-methoxy-1-buten-3-yne were synthesized and characterized by infrared, UV-Vis, photoluminescence, 1H and 13C NMR and elemental analysis. The functionalized polypyridine molecules were used to synthesize various ruthenium(II) homoleptic/heteroleptic and/or heteronuclear complexes and their photophysical and electrochemical properties evaluated. The preliminary results of the solar-to-electrical conversion efficiencies of some synthesized Ru(II) polypyridyl complexes were presented in chapter 5. It was found out as expected that the ruthenium(II) polypyridine complexes containing either heteronuclear polypyridine ligands or their thiocyanate analogues of the types [Ru(L1)2L2(PF6)2], [RuL1(L2)2(PF6)2] and [RuL1L2(NCS)2], showed better photophysical properties (red-shifted metal-to-ligand charge-transfer (MLCT) transitions concomitant with enhanced molar extinction coefficients), luminescence and interesting electrochemical redox properties than those containing homonuclear ligand types [Ru(L1)3(PF6)2]. The ruthenium(II) anthracenyl functionalized phthalocyanine complexes which were obtained by electrophilic aromatic substitution reactions in the peripheral positions gave good solubility properties in various organic solvents and also showed interesting near infrared absorption and electroredox characteristics. Cyclic and square wave voltammetries of these complexes revealed major redox processes and the numbers of electron(s) transfer were determined by chronocoulometry. It was established that a mono- and/or multi-electronic transfer reactions can occur in the various ruthenium(II) complexes. The photophysical properties of some complexes showed them to be better and promising candidates in the design of chemosensors, organic light emitting diodes (OLEDs) and as photosensitizers, while their redox-active natures make them potential mediators in electron-transfer for various photochemical processes. However, due to low surface concentration and/or adsorption of some tested complexes on TiO2 semiconductor nanocrystalline particle, low currents were generated and the highest solar-to- electrical conversion efficiency recorded in this study was 0.10 percent. , Thesis (PhD) -- Faculty of Science and Agriculture, 2011
- Full Text:
- Date Issued: 2011-01
Functionalized Ru(II) polypyridines and phthalocyanines: Potential dyes for dye-sensitized solar cells(DSSCs)
- Adeloye, Adewale Olufunsho https://orcid.org/0000-0003-1736-5738
- Authors: Adeloye, Adewale Olufunsho https://orcid.org/0000-0003-1736-5738
- Date: 2011-01
- Subjects: Phthalocyanines , Dye-sensitized solar cells
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/24343 , vital:62638
- Description: This study describes the design, synthesis, characterization and preliminary investigation of the solar-to-electrical energy conversion efficiency of ruthenium(II) functionalized polypyridine and phthalocyanine complexes with extended π-conjugation. Polypyridinyl functionalized with anthracene, 2,3-dimethylacrylic acid and 1-methoxy-1-buten-3-yne were synthesized and characterized by infrared, UV-Vis, photoluminescence, 1H and 13C NMR and elemental analysis. The functionalized polypyridine molecules were used to synthesize various ruthenium(II) homoleptic/heteroleptic and/or heteronuclear complexes and their photophysical and electrochemical properties evaluated. The preliminary results of the solar-to-electrical conversion efficiencies of some synthesized Ru(II) polypyridyl complexes were presented in chapter 5. It was found out as expected that the ruthenium(II) polypyridine complexes containing either heteronuclear polypyridine ligands or their thiocyanate analogues of the types [Ru(L1)2L2(PF6)2], [RuL1(L2)2(PF6)2] and [RuL1L2(NCS)2], showed better photophysical properties (red-shifted metal-to-ligand charge-transfer (MLCT) transitions concomitant with enhanced molar extinction coefficients), luminescence and interesting electrochemical redox properties than those containing homonuclear ligand types [Ru(L1)3(PF6)2]. The ruthenium(II) anthracenyl functionalized phthalocyanine complexes which were obtained by electrophilic aromatic substitution reactions in the peripheral positions gave good solubility properties in various organic solvents and also showed interesting near infrared absorption and electroredox characteristics. Cyclic and square wave voltammetries of these complexes revealed major redox processes and the numbers of electron(s) transfer were determined by chronocoulometry. It was established that a mono- and/or multi-electronic transfer reactions can occur in the various ruthenium(II) complexes. The photophysical properties of some complexes showed them to be better and promising candidates in the design of chemosensors, organic light emitting diodes (OLEDs) and as photosensitizers, while their redox-active natures make them potential mediators in electron-transfer for various photochemical processes. However, due to low surface concentration and/or adsorption of some tested complexes on TiO2 semiconductor nanocrystalline particle, low currents were generated and the highest solar-to-electrical conversion efficiency recorded in this study was 0.10 percent. , Thesis (PhD) -- Faculty of Science and Agriculture, 2011
- Full Text:
- Date Issued: 2011-01
- Authors: Adeloye, Adewale Olufunsho https://orcid.org/0000-0003-1736-5738
- Date: 2011-01
- Subjects: Phthalocyanines , Dye-sensitized solar cells
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/24343 , vital:62638
- Description: This study describes the design, synthesis, characterization and preliminary investigation of the solar-to-electrical energy conversion efficiency of ruthenium(II) functionalized polypyridine and phthalocyanine complexes with extended π-conjugation. Polypyridinyl functionalized with anthracene, 2,3-dimethylacrylic acid and 1-methoxy-1-buten-3-yne were synthesized and characterized by infrared, UV-Vis, photoluminescence, 1H and 13C NMR and elemental analysis. The functionalized polypyridine molecules were used to synthesize various ruthenium(II) homoleptic/heteroleptic and/or heteronuclear complexes and their photophysical and electrochemical properties evaluated. The preliminary results of the solar-to-electrical conversion efficiencies of some synthesized Ru(II) polypyridyl complexes were presented in chapter 5. It was found out as expected that the ruthenium(II) polypyridine complexes containing either heteronuclear polypyridine ligands or their thiocyanate analogues of the types [Ru(L1)2L2(PF6)2], [RuL1(L2)2(PF6)2] and [RuL1L2(NCS)2], showed better photophysical properties (red-shifted metal-to-ligand charge-transfer (MLCT) transitions concomitant with enhanced molar extinction coefficients), luminescence and interesting electrochemical redox properties than those containing homonuclear ligand types [Ru(L1)3(PF6)2]. The ruthenium(II) anthracenyl functionalized phthalocyanine complexes which were obtained by electrophilic aromatic substitution reactions in the peripheral positions gave good solubility properties in various organic solvents and also showed interesting near infrared absorption and electroredox characteristics. Cyclic and square wave voltammetries of these complexes revealed major redox processes and the numbers of electron(s) transfer were determined by chronocoulometry. It was established that a mono- and/or multi-electronic transfer reactions can occur in the various ruthenium(II) complexes. The photophysical properties of some complexes showed them to be better and promising candidates in the design of chemosensors, organic light emitting diodes (OLEDs) and as photosensitizers, while their redox-active natures make them potential mediators in electron-transfer for various photochemical processes. However, due to low surface concentration and/or adsorption of some tested complexes on TiO2 semiconductor nanocrystalline particle, low currents were generated and the highest solar-to-electrical conversion efficiency recorded in this study was 0.10 percent. , Thesis (PhD) -- Faculty of Science and Agriculture, 2011
- Full Text:
- Date Issued: 2011-01
Genetic diversity, resistance profile of HIV and risk assessment of mother-to-child transmission in pregnant women on anti-retroviral therapy in the Eastern Cape, South Africa
- Authors: Adeniyi, Oladele Vincent
- Date: 2018-12
- Subjects: Antiretroviral agents , AIDS (Disease) in infants
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19817 , vital:43254
- Description: Despite the initiation of life-long ART in HIV-infected pregnant women, the rate and determinants of infant HIV transmission are not known, especially in the poor resource settings of the Eastern Cape, South Africa. Maternal anti-retroviral therapy (ART) is crucial for elimination of mother-to-child transmission (MTCT) of HIV. However, the inevitable risks of emergence of HIV drug resistance poses significant threat to achieving this goal of HIV-free generation and keeping mothers alive. Also, it is unclear if women with high viral load at delivery have acquired clinically relevant mutations, which could confer resistance to the ART, thus, further increasing the risks of motherto- child transmission of HIV-drug resistance strains. In addition to the gaps identified in the prevention of mother-to-child transmission (PMTCT) context, the understanding of regional epidemics is crucial to the broader epidemiological profiling of HIV infections in the country. Despite the rapid influx of foreign nationals to South African and Eastern Cape Province, there has not been any molecular epidemiological studies profiling the HIV diversity in the Eastern Cape. , Thesis (PhD) (Microbiology) -- University of Fort Hare, 2018
- Full Text:
- Date Issued: 2018-12
- Authors: Adeniyi, Oladele Vincent
- Date: 2018-12
- Subjects: Antiretroviral agents , AIDS (Disease) in infants
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19817 , vital:43254
- Description: Despite the initiation of life-long ART in HIV-infected pregnant women, the rate and determinants of infant HIV transmission are not known, especially in the poor resource settings of the Eastern Cape, South Africa. Maternal anti-retroviral therapy (ART) is crucial for elimination of mother-to-child transmission (MTCT) of HIV. However, the inevitable risks of emergence of HIV drug resistance poses significant threat to achieving this goal of HIV-free generation and keeping mothers alive. Also, it is unclear if women with high viral load at delivery have acquired clinically relevant mutations, which could confer resistance to the ART, thus, further increasing the risks of motherto- child transmission of HIV-drug resistance strains. In addition to the gaps identified in the prevention of mother-to-child transmission (PMTCT) context, the understanding of regional epidemics is crucial to the broader epidemiological profiling of HIV infections in the country. Despite the rapid influx of foreign nationals to South African and Eastern Cape Province, there has not been any molecular epidemiological studies profiling the HIV diversity in the Eastern Cape. , Thesis (PhD) (Microbiology) -- University of Fort Hare, 2018
- Full Text:
- Date Issued: 2018-12
Agro-morphological characterisation, nitrogen use efficiency and combining ability of quality protein maize (zea mays l.) genotypes for low nitrogen tolerance
- AdeOluwa, Olusola Oluyinka https://orcid.org/ 0000-0003-2145-7141
- Authors: AdeOluwa, Olusola Oluyinka https://orcid.org/ 0000-0003-2145-7141
- Date: 2021-08
- Subjects: Corn -- Quality
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21501 , vital:48855 , http://id.loc.gov/authorities/subjects/sh85032715
- Description: Low nitrogen stress tolerant Quality Protein Maize (QPM) genotypes will be of great benefit to farmers for increasing productivity in nitrogen depleted soils in the Eastern Cape (EC) Province, South Africa (SA). The current study evaluated: (i) QPM inbred lines for tolerance to low soil nitrogen, (ii) the Nitrogen Use Efficiency (NUE) of different QPM inbred lines, (iii) the combining ability of QPM genotypes for tolerance to low nitrogen, grain yield, and other agro-morphological traits, and (iv) the agro-morphological characteristics and adaptation of QPM hybrids to environments of different production potential in the Eastern Cape, South Africa. Thirty-two white-seeded QPM inbred lines obtained from CIMMYT-Zimbabwe and Quality Seeds (PTY) LTD were evaluated for tolerance to low soil nitrogen stress using two nitrogen (N) treatment levels: 0 kg N ha-1 and 30 kg N ha-1 under both glasshouse and field conditions at the Crop Research farm, University of Fort Hare, in two planting seasons. The study aimed at assessing the response of QPM inbred lines to low N, with a view to identifying low N tolerant types under both glasshouse and field conditions. Shoot length stress tolerance index (SHL STI) indicated lines L23, L29, L27, L13, L16, L17, L31, L14, L18 and L22 to be low soil N tolerant from the glasshouse study. From the field study, low N Stress Tolerance Index (STI) identified inbred lines L23, L31, L26, L28, L25, L29, L32, L4, L6, L3 and L2 as low soil N tolerant. These inbred lines also had high grain yields (GY) in the field under 0 kg N ha-1 (all ranked within the top ten except L2). They also had the potential for stable yields across environments considering their high Yield Stability Index (YSI), Mean Productivity (MP), Geometric Mean Productivity (GMP) and Stress Susceptibility Index (SSI) values. Both the glasshouse and field studies revealed inbred lines L22, L23, L26, L28, L25, L29 and L31 were common to both the glasshouse and field studies as being low soil N tolerant. These thirty-two parental QPM inbred lines were evaluated in the field for their nitrogen use efficiency (NUE) under five different nitrogen levels: 0, 30, 60, 90 and 120 kg N ha-1. The inbred lines studied under 0 kg N ha-1 and 30 kg N ha-1 indicated that N level expressed highly significant differences (P ≤ 0.001) for total nitrogen in biomass (Bio Total N), total nitrogen in grain (G Total N), grain yield (GY), nitrogen use efficiency (NUE) and almost all the indices estimated. The top six nutrient use efficient genotypes were L9, L14, L23, L25, L29 and L32 across N levels. However, the best and highest NUE was obtained from the lowest fertilizer dose, 30 kg N ha-1. Highly significant and positive correlation coefficients were found between Nitrogen Use Efficiency (NUE) and yield (+0.9), NUE and NUtE (+0.9), NUE and HI (Harvest Index) (+0.5), NUtE and yield (+0.99), HI and yield (+0.5) and NUtE and HI (+0.5). Thus, NUE, HI and NUtE could be good predictors of yield potential under low N soil conditions. Sixty-four testcross hybrids were generated from crossing these 32 QPM inbred lines with two QPM open pollinated varieties (OPVs) as testers in a line x tester design and were evaluated under 0 kg N ha-1 and 30 kg N ha-1 in the field. The objectives of the experiment were to: (i) identify high yielding hybrids with tolerance to low soil N in the EC; (ii) determine the combining abilities and mode of gene action for various traits under low and high nitrogen conditions; and (iii) group the inbred lines into heterotic groups for future use in the breeding program. Results revealed that under 30 kg N ha-1 (30N) condition, both additive and non-additive gene effects were observed with less importance of non-additive gene action for grain yield. Based on specific combining ability (SCA) effects, hybrids LNC22, LNC31, LOB22, LNC30, LNC29, LOB11, LNC18, LOB30, LOB19 and LNC24 showed outstanding performance under 0 kg N ha-1 (0N) condition with relatively acceptable SCA under 30N for yield. Inbred lines L6 (1.63), L22 (1.74), L29 (1.83) and L30 (1.24) showed positive and significant GCAs for grain yield under 0N. They were identified as the best combiners for grain yield as they were among the top ten performers for GCA under 0N. They can be very useful sources of low N tolerance genes. Two heterotic groups were formed under 0 kg N ha-1 and 30 kg N ha-1 conditions, and they will be useful for future hybrid development in the breeding program. Furthermore, these thirty-two QPM inbred lines were utilised as parental lines to generate seventy-six single cross hybrids. These single cross hybrids were evaluated across three environments of varying production potential in the Eastern Cape (EC), during the 2016/17 and 2017/18 summer seasons. Non-QPM hybrids namely PAN5Q649R and Phb31MO7BR, as well as QPM OPVs OBATANPA and Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-08
- Authors: AdeOluwa, Olusola Oluyinka https://orcid.org/ 0000-0003-2145-7141
- Date: 2021-08
- Subjects: Corn -- Quality
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21501 , vital:48855 , http://id.loc.gov/authorities/subjects/sh85032715
- Description: Low nitrogen stress tolerant Quality Protein Maize (QPM) genotypes will be of great benefit to farmers for increasing productivity in nitrogen depleted soils in the Eastern Cape (EC) Province, South Africa (SA). The current study evaluated: (i) QPM inbred lines for tolerance to low soil nitrogen, (ii) the Nitrogen Use Efficiency (NUE) of different QPM inbred lines, (iii) the combining ability of QPM genotypes for tolerance to low nitrogen, grain yield, and other agro-morphological traits, and (iv) the agro-morphological characteristics and adaptation of QPM hybrids to environments of different production potential in the Eastern Cape, South Africa. Thirty-two white-seeded QPM inbred lines obtained from CIMMYT-Zimbabwe and Quality Seeds (PTY) LTD were evaluated for tolerance to low soil nitrogen stress using two nitrogen (N) treatment levels: 0 kg N ha-1 and 30 kg N ha-1 under both glasshouse and field conditions at the Crop Research farm, University of Fort Hare, in two planting seasons. The study aimed at assessing the response of QPM inbred lines to low N, with a view to identifying low N tolerant types under both glasshouse and field conditions. Shoot length stress tolerance index (SHL STI) indicated lines L23, L29, L27, L13, L16, L17, L31, L14, L18 and L22 to be low soil N tolerant from the glasshouse study. From the field study, low N Stress Tolerance Index (STI) identified inbred lines L23, L31, L26, L28, L25, L29, L32, L4, L6, L3 and L2 as low soil N tolerant. These inbred lines also had high grain yields (GY) in the field under 0 kg N ha-1 (all ranked within the top ten except L2). They also had the potential for stable yields across environments considering their high Yield Stability Index (YSI), Mean Productivity (MP), Geometric Mean Productivity (GMP) and Stress Susceptibility Index (SSI) values. Both the glasshouse and field studies revealed inbred lines L22, L23, L26, L28, L25, L29 and L31 were common to both the glasshouse and field studies as being low soil N tolerant. These thirty-two parental QPM inbred lines were evaluated in the field for their nitrogen use efficiency (NUE) under five different nitrogen levels: 0, 30, 60, 90 and 120 kg N ha-1. The inbred lines studied under 0 kg N ha-1 and 30 kg N ha-1 indicated that N level expressed highly significant differences (P ≤ 0.001) for total nitrogen in biomass (Bio Total N), total nitrogen in grain (G Total N), grain yield (GY), nitrogen use efficiency (NUE) and almost all the indices estimated. The top six nutrient use efficient genotypes were L9, L14, L23, L25, L29 and L32 across N levels. However, the best and highest NUE was obtained from the lowest fertilizer dose, 30 kg N ha-1. Highly significant and positive correlation coefficients were found between Nitrogen Use Efficiency (NUE) and yield (+0.9), NUE and NUtE (+0.9), NUE and HI (Harvest Index) (+0.5), NUtE and yield (+0.99), HI and yield (+0.5) and NUtE and HI (+0.5). Thus, NUE, HI and NUtE could be good predictors of yield potential under low N soil conditions. Sixty-four testcross hybrids were generated from crossing these 32 QPM inbred lines with two QPM open pollinated varieties (OPVs) as testers in a line x tester design and were evaluated under 0 kg N ha-1 and 30 kg N ha-1 in the field. The objectives of the experiment were to: (i) identify high yielding hybrids with tolerance to low soil N in the EC; (ii) determine the combining abilities and mode of gene action for various traits under low and high nitrogen conditions; and (iii) group the inbred lines into heterotic groups for future use in the breeding program. Results revealed that under 30 kg N ha-1 (30N) condition, both additive and non-additive gene effects were observed with less importance of non-additive gene action for grain yield. Based on specific combining ability (SCA) effects, hybrids LNC22, LNC31, LOB22, LNC30, LNC29, LOB11, LNC18, LOB30, LOB19 and LNC24 showed outstanding performance under 0 kg N ha-1 (0N) condition with relatively acceptable SCA under 30N for yield. Inbred lines L6 (1.63), L22 (1.74), L29 (1.83) and L30 (1.24) showed positive and significant GCAs for grain yield under 0N. They were identified as the best combiners for grain yield as they were among the top ten performers for GCA under 0N. They can be very useful sources of low N tolerance genes. Two heterotic groups were formed under 0 kg N ha-1 and 30 kg N ha-1 conditions, and they will be useful for future hybrid development in the breeding program. Furthermore, these thirty-two QPM inbred lines were utilised as parental lines to generate seventy-six single cross hybrids. These single cross hybrids were evaluated across three environments of varying production potential in the Eastern Cape (EC), during the 2016/17 and 2017/18 summer seasons. Non-QPM hybrids namely PAN5Q649R and Phb31MO7BR, as well as QPM OPVs OBATANPA and Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-08
Bioprospecting for amylases, cellulases and xylanases from ericoid associated fungi, their production and characterisation for the bio-economy
- Authors: Adeoyo, Olusegun Richard
- Date: 2018
- Subjects: Mycorrhizal fungi , Hydrolases , Ericaceae South Africa , Ericaceae Molecular aspects
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/64327 , vital:28533
- Description: South Africa is one of the most productive areas for ericaceous plants with about 850 identified species in the Cape Floral Region. The Albany Centre of Endemism where all fungi used in this study were isolated from, falls within this region. Ericaceous plants interact with some fungi via an association called the ericoid mycorrhizal (ERM) association. All fungi used in this study were isolated from roots of six ericaceous plants; Erica cerinthoides, Erica demissa, Erica chamissonis, Erica glumiflora, Erica caffra and Erica nemorosa. Fungal enzymes are known to play a significant role in the food, brewing, detergent, pharmaceutical and biofuel industries. The enzyme industry is among the major sectors of the world, and additional novel sources are being explored from time to time. This study focussed on amylases (amyloglucosidase, AMG), cellulases (endoglucanase) and xylanases (endo-1,4-P-xylanase) production from ERM fungal isolates. Out of the fifty-one (51), fungal isolates screened, ChemRU330 (Leohumicola sp.), EdRU083 and EdRU002 were among the fungi that had the highest activities of all the enzymes. They were tested for the ability to produce amylases and cellulases under different pH and nutritional conditions that included: carbon sources, nitrogen sources and metal ions, at an optimum temperature of 28°C in a modified Melin-Norkrans (MMN) liquid medium. Cellulase specific activity of 3.99, 2.18 and 4.31 (U/mg protein) for isolates EdRU083, EdRU002 and ChemRU330, respectively, was produced at an optimal pH of 5.0. For amylase, ChemRU330 had the highest specific activity of 1.11 U/mg protein while EdRU083 and EdRU02 had a specific activity of 0.80 and 0.92 U/mg protein, respectively, at the same pH with corresponding biomass yield of 113, 125 and 97 mg/50 ml, respectively. Increased enzyme activities and improved mycelial biomass production were obtained in the presence of supplements such as potassium, sodium, glucose, maltose, cellobiose, tryptone and peptone, while NaFe-EDTA and cobalt inhibited enzyme activity. ChemRU330 was selected to determine the consistency and amount of amylase, cellulase and xylanase formed after several in vitro subculturing events. AMG and endo-1,4-P-xylanase were found to have the most consistent production throughout the study period. The AMG was stable at 45oC (pH 5.0), retaining approximately 65% activity over a period of 24 h. The molecular mass of AMG and endo-1,4-P-xylanase were estimated to be 101 kDa and 72 kDa, respectively. The Km and kcat were 0.38 mg/ml and 70 s-1, respectively, using soluble starch (AMG). For endo-1,4-P-xylanase, the Km and Vmax were 0.93 mg/ml and 8.54 U/ml, respectively, using beechwood xylan (endo-1,4-P-xylanase) as substrate. Additionally, crude extracts of five root endophytes with unique morphological characteristics were screened for antibacterial properties and was followed by determination of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). L. incrustata (ChemRU330) and Chaetomium sp. extracts exhibited varying degrees of inhibition against two Gram-positive and Gram-negative bacteria. The crude extract of L. incrustata was the most effective which was found to inhibit Staphylococcus aureus (MIC: 1 mg/ml), Bacillus subtilis (MIC: 2 mg/ml) and Proteus vulgaris (MIC: 16 mg/ml). The L. incrustata displayed potential for antibacterial production and could be considered as an additional source of new antimicrobial agents in drug and food preservation. Also, the three isolates used for enzyme production were identified to genus and species levels, i.e., Leohumicola incrustata (ChemRU330), Leohumicola sp. (EdRU083) and Oidiodendron sp. (EdRU002) using both ITS and Cox1 DNA regions. The molecular analysis results indicated that these ERM mycorrhizal fungi were similar to those successfully described by some researchers in South Africa and Australia. Therefore, this study opens new opportunities for exploring ERM fungal biomolecules for the bio-economy. The promising physicochemical properties, starch and xylan hydrolysis end- products, and being non-pathogenic make AMG and endo-1,4-P-xylanase potential candidates for future applications as additives in the food industry for the production of glucose, glucose syrups, high-fructose corn syrups, and as well as the production of bioethanol. Finally, the findings of this study revealed that it is possible to produce hydrolytic enzymes from ERM fungi in vitro using chemically defined media. , Thesis (PhD) -- Faculty of Science, Biochemistry and Microbiology, 2018
- Full Text:
- Date Issued: 2018
- Authors: Adeoyo, Olusegun Richard
- Date: 2018
- Subjects: Mycorrhizal fungi , Hydrolases , Ericaceae South Africa , Ericaceae Molecular aspects
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/64327 , vital:28533
- Description: South Africa is one of the most productive areas for ericaceous plants with about 850 identified species in the Cape Floral Region. The Albany Centre of Endemism where all fungi used in this study were isolated from, falls within this region. Ericaceous plants interact with some fungi via an association called the ericoid mycorrhizal (ERM) association. All fungi used in this study were isolated from roots of six ericaceous plants; Erica cerinthoides, Erica demissa, Erica chamissonis, Erica glumiflora, Erica caffra and Erica nemorosa. Fungal enzymes are known to play a significant role in the food, brewing, detergent, pharmaceutical and biofuel industries. The enzyme industry is among the major sectors of the world, and additional novel sources are being explored from time to time. This study focussed on amylases (amyloglucosidase, AMG), cellulases (endoglucanase) and xylanases (endo-1,4-P-xylanase) production from ERM fungal isolates. Out of the fifty-one (51), fungal isolates screened, ChemRU330 (Leohumicola sp.), EdRU083 and EdRU002 were among the fungi that had the highest activities of all the enzymes. They were tested for the ability to produce amylases and cellulases under different pH and nutritional conditions that included: carbon sources, nitrogen sources and metal ions, at an optimum temperature of 28°C in a modified Melin-Norkrans (MMN) liquid medium. Cellulase specific activity of 3.99, 2.18 and 4.31 (U/mg protein) for isolates EdRU083, EdRU002 and ChemRU330, respectively, was produced at an optimal pH of 5.0. For amylase, ChemRU330 had the highest specific activity of 1.11 U/mg protein while EdRU083 and EdRU02 had a specific activity of 0.80 and 0.92 U/mg protein, respectively, at the same pH with corresponding biomass yield of 113, 125 and 97 mg/50 ml, respectively. Increased enzyme activities and improved mycelial biomass production were obtained in the presence of supplements such as potassium, sodium, glucose, maltose, cellobiose, tryptone and peptone, while NaFe-EDTA and cobalt inhibited enzyme activity. ChemRU330 was selected to determine the consistency and amount of amylase, cellulase and xylanase formed after several in vitro subculturing events. AMG and endo-1,4-P-xylanase were found to have the most consistent production throughout the study period. The AMG was stable at 45oC (pH 5.0), retaining approximately 65% activity over a period of 24 h. The molecular mass of AMG and endo-1,4-P-xylanase were estimated to be 101 kDa and 72 kDa, respectively. The Km and kcat were 0.38 mg/ml and 70 s-1, respectively, using soluble starch (AMG). For endo-1,4-P-xylanase, the Km and Vmax were 0.93 mg/ml and 8.54 U/ml, respectively, using beechwood xylan (endo-1,4-P-xylanase) as substrate. Additionally, crude extracts of five root endophytes with unique morphological characteristics were screened for antibacterial properties and was followed by determination of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). L. incrustata (ChemRU330) and Chaetomium sp. extracts exhibited varying degrees of inhibition against two Gram-positive and Gram-negative bacteria. The crude extract of L. incrustata was the most effective which was found to inhibit Staphylococcus aureus (MIC: 1 mg/ml), Bacillus subtilis (MIC: 2 mg/ml) and Proteus vulgaris (MIC: 16 mg/ml). The L. incrustata displayed potential for antibacterial production and could be considered as an additional source of new antimicrobial agents in drug and food preservation. Also, the three isolates used for enzyme production were identified to genus and species levels, i.e., Leohumicola incrustata (ChemRU330), Leohumicola sp. (EdRU083) and Oidiodendron sp. (EdRU002) using both ITS and Cox1 DNA regions. The molecular analysis results indicated that these ERM mycorrhizal fungi were similar to those successfully described by some researchers in South Africa and Australia. Therefore, this study opens new opportunities for exploring ERM fungal biomolecules for the bio-economy. The promising physicochemical properties, starch and xylan hydrolysis end- products, and being non-pathogenic make AMG and endo-1,4-P-xylanase potential candidates for future applications as additives in the food industry for the production of glucose, glucose syrups, high-fructose corn syrups, and as well as the production of bioethanol. Finally, the findings of this study revealed that it is possible to produce hydrolytic enzymes from ERM fungi in vitro using chemically defined media. , Thesis (PhD) -- Faculty of Science, Biochemistry and Microbiology, 2018
- Full Text:
- Date Issued: 2018
Surveillance study on pathogenic Acinetobacter species in freshwater environment of the Amathole and Chris Hani District Municipalities, Eastern Cape, South Africa
- Authors: Adewoyin, Mary Ayobami
- Date: 2019-09
- Subjects: Acinetobacter infections , Acinetobacter , Nosocomial infections
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19836 , vital:43257
- Description: This study evaluates the occurrence of medically relevant Acinetobacter species in three rivers, namely; Keiskamma, Tyhume and Great Fish in the Eastern Cape Province, South Africa in one year sampling regime (April 2017 - March 2018). The physicochemical parameters (pH, temperature (TEM), electrical conductivity (EC), total dissolved solids (TDS), salinity (SAL), total suspended solids (TSS), turbidity (TBS), dissolved oxygen (DO) and biological oxygen demand (BOD)) of the water bodies were measured. The presumptive Acinetobacter species recovered from the freshwater resources were recorded and further confirmed using molecular techniques. Similarly, confirmed isolates were subjected to speciation using species-specific primer sets for A. baumannii and A. nosocomialis. Also, virulence genes namely; afa/draBC, epsA, fimH, OmpA, PAI, sfa/focDE, and traT in the two Acinetobacter species were also determined using molecular method. In addition, the antibiogram characteristics of A. baumannii and A. nosocomialis isolated from the water samples were determined using standard methods. The antibiotic susceptibility test was performed using a panel of 12 antibiotics belonging to the aminoglycosides (amikacin, AK and gentamicin, GM), β-lactam/β-lactamase-inhibitor combinations (piperacillin-tazobactam, PTZ), cephems (ceftazidime, CAZ, cefotaxime, CTX, and cefepime, CPM), carbapenems (imipenem, IMI and meropenem, MEM), fluoroquinolones (ciprofloxacin, CIP), folate pathway inhibitors (Trimethoprim/sulfamethoxazole, TS), lipopeptides (Polymyxin B, PB) and tetracyclines (tetracycline, TET). Similarly, antibiotic resistance genes (ARGs) present in the Acinetobacter isolates were investigated including aminoglycoside resistance genes (aacC2, aphA1 and aphA2), β-lactamases resistance genes (blaTEM, blaSHV, blaOXA-1-like, blaCTX-M(GROUP 1), blaCTX-M(GROUP 2), blaCTX-M(GROUP 9), blaVEB, blaGES, blaPER, blaCTX-M-8/-25, blaOXA-48-like, blaVIM, blaIMP and blaKPC), fluoroquinolones resistance genes (qnrA, qnrB, qnrC, qnrD and qnrS), sulfonamide resistance genes (sul1 and sul2), and tetracycline resistance genes (tetA, tetB, tetC, tetM, tetL and tetO). The pH, EC, TDS, SAL, TEMP, TSS, TBS, DO, and BOD for Tyhume River ranged as follows: 7.2-7.7, 125-141 μS/cm, 62-71mg/L, 0.06- 0.07 PSU, 11.3-20.2oC, 30.0-89.6 mg/L, 35.0-96.0 NTU, 8.2-9.8 mg/L, 2.0-4.2 mg/L, while for Great Fish River, the parameters were 8.0-8.2, 274-369 μS/cm, 137-184mg/L, 0.13-0.18PSU, 12.7-22.3oC, 44.3-99.4 mg/L, 48.0-214.0 NTU, 7.8-9.9 mg/L, 3.1- 4.9 mg/L, and at Keiskamma River they were 7.5-7.9, 153.2-285.0 μS/cm, 86-143 mg/L, 0.07-0.14 PSU, 11.0-21.4oC, 27.0- 55.6 mg/L, 31-61 NTU, 8.3-9.8 mg/L, 3.0-6.0 mg/L. A total of 1107 presumptive Acinetobacter spp. were recovered from the rivers sampled of which 428, 370 and 309 isolates were recovered from Tyhume, Great Fish and Keiskamma rivers respectively. However, only 844 was confirmed positive for the genus Acinetobacter and are recovered in the proportions 285 (77 percent), 219 (70.9 percent) and 340 (79 percent) from Great Fish, Keiskemma and Tyhume rivers respectively. Our finding revealed that 410 (48.58 percent) and 23 (2.7 percent) of the isolates were confirmed to be A. baumannii and A. nosocomalis respectively. Also, 308 (75.12 percent percent) A. baumannii and 3 (13.04 percent) A. nosocomialis isolates exhibited one or more virulence genes out of the seven tested, whereas 102 (24.88 percent) and 20 (86.95 percent) of the A. baumannii and A. nosocomialis isolates did not harbour any virulence gene. Additionally, OmpA was the most prevalent (p<0.05) virulence gene found in A. baumannii with 69 (45.10 percent), 52 (50.98 percent) and 77 (49.68 percent) isolates from Great Fish, Keiskamma and Tyhume rivers respectively. The rates of susceptibilities of A. baumannii and A. nosocomialis to the antibiotics followed the order; Piperacillin-tazobactam (72.8 percent ; 73.9 percent), Ceftazidime (70.5 percent ; 91.3 percent), Cefotaxime (16.8 percent ; 17.4 percent), Cefepime (88.5 percent ; 95.7 percent), Imipenem (95.9 percent ; 100 percent ), Meropenem (92.7 percent ; 91.3 percent), Amikacin (97.6 percent ; 91.3 percent), Gentamicin (89.8 percent ; 87 percent), Polymyxin B (84.4 percent ; 91.3 percent), Tetracycline (74.7 percent ; 78.3 percent), Ciprofloxacin (75.9 percent ; 78.3 percent) and Trimethoprim/sulfamethoxazole (74.0 percent ; 73.9 percent) respectively. Both A. baumannii and A. nosocomialis were highly susceptible to all the antimicrobials tested except cefotaxime where 64 percent and 78 percent intermediate responses were observed in the species. At least 10 isolates of A. baumannii were resistant against each of the antibiotics used. The modal multiple antibiotics resistance phenotypes (MARPs) for Acinetobacter spp. was MARP 3 (29.87 percent) and the least was MARP 10 and 11 (2.6 percent each). The antimicrobial resistance index (ARI) was higher at two sampling sites KE2 (0.33) and TY1 (0.22). Similarly, MARI showed that sampling sites KE2 was a hotspot for multidrug-resistant Acinetobacter spp. Of the five classes of ARGs studied, there was a widespread of β-lactamases (blaTEM) in the two Acinetobacter species, followed by sul2, which were detected in 67 (63.2 percent) and 44 (49.4 percent) isolates respectively, across the rivers studied. We conclude that aquatic resources of the study community are important reservoirs of pathogenic Acinetobacter species and antibiotic resistance determinants. The occurrence of clinically-important Acinetobacter species suggests possible contamination of these selected rivers which are consumed by humans and livestock, as well as being used for irrigation system, and this constitutes a risk to public health. It also shows that A. baumannii and A. nosocomialis can thrive in the aquatic environment. This study suggests that direct utilization of water from these sources for domestic and other purposes without any form of pre-treatment should be avoided. It is, therefore, necessary for regulatory authorities to monitor the release of domestic and industrial wastewater into these water bodies in order to prevent outbreaks of epidemics. , Thesis (PhD) (Microbiology) -- University of Fort Hare, 2019
- Full Text:
- Date Issued: 2019-09
- Authors: Adewoyin, Mary Ayobami
- Date: 2019-09
- Subjects: Acinetobacter infections , Acinetobacter , Nosocomial infections
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19836 , vital:43257
- Description: This study evaluates the occurrence of medically relevant Acinetobacter species in three rivers, namely; Keiskamma, Tyhume and Great Fish in the Eastern Cape Province, South Africa in one year sampling regime (April 2017 - March 2018). The physicochemical parameters (pH, temperature (TEM), electrical conductivity (EC), total dissolved solids (TDS), salinity (SAL), total suspended solids (TSS), turbidity (TBS), dissolved oxygen (DO) and biological oxygen demand (BOD)) of the water bodies were measured. The presumptive Acinetobacter species recovered from the freshwater resources were recorded and further confirmed using molecular techniques. Similarly, confirmed isolates were subjected to speciation using species-specific primer sets for A. baumannii and A. nosocomialis. Also, virulence genes namely; afa/draBC, epsA, fimH, OmpA, PAI, sfa/focDE, and traT in the two Acinetobacter species were also determined using molecular method. In addition, the antibiogram characteristics of A. baumannii and A. nosocomialis isolated from the water samples were determined using standard methods. The antibiotic susceptibility test was performed using a panel of 12 antibiotics belonging to the aminoglycosides (amikacin, AK and gentamicin, GM), β-lactam/β-lactamase-inhibitor combinations (piperacillin-tazobactam, PTZ), cephems (ceftazidime, CAZ, cefotaxime, CTX, and cefepime, CPM), carbapenems (imipenem, IMI and meropenem, MEM), fluoroquinolones (ciprofloxacin, CIP), folate pathway inhibitors (Trimethoprim/sulfamethoxazole, TS), lipopeptides (Polymyxin B, PB) and tetracyclines (tetracycline, TET). Similarly, antibiotic resistance genes (ARGs) present in the Acinetobacter isolates were investigated including aminoglycoside resistance genes (aacC2, aphA1 and aphA2), β-lactamases resistance genes (blaTEM, blaSHV, blaOXA-1-like, blaCTX-M(GROUP 1), blaCTX-M(GROUP 2), blaCTX-M(GROUP 9), blaVEB, blaGES, blaPER, blaCTX-M-8/-25, blaOXA-48-like, blaVIM, blaIMP and blaKPC), fluoroquinolones resistance genes (qnrA, qnrB, qnrC, qnrD and qnrS), sulfonamide resistance genes (sul1 and sul2), and tetracycline resistance genes (tetA, tetB, tetC, tetM, tetL and tetO). The pH, EC, TDS, SAL, TEMP, TSS, TBS, DO, and BOD for Tyhume River ranged as follows: 7.2-7.7, 125-141 μS/cm, 62-71mg/L, 0.06- 0.07 PSU, 11.3-20.2oC, 30.0-89.6 mg/L, 35.0-96.0 NTU, 8.2-9.8 mg/L, 2.0-4.2 mg/L, while for Great Fish River, the parameters were 8.0-8.2, 274-369 μS/cm, 137-184mg/L, 0.13-0.18PSU, 12.7-22.3oC, 44.3-99.4 mg/L, 48.0-214.0 NTU, 7.8-9.9 mg/L, 3.1- 4.9 mg/L, and at Keiskamma River they were 7.5-7.9, 153.2-285.0 μS/cm, 86-143 mg/L, 0.07-0.14 PSU, 11.0-21.4oC, 27.0- 55.6 mg/L, 31-61 NTU, 8.3-9.8 mg/L, 3.0-6.0 mg/L. A total of 1107 presumptive Acinetobacter spp. were recovered from the rivers sampled of which 428, 370 and 309 isolates were recovered from Tyhume, Great Fish and Keiskamma rivers respectively. However, only 844 was confirmed positive for the genus Acinetobacter and are recovered in the proportions 285 (77 percent), 219 (70.9 percent) and 340 (79 percent) from Great Fish, Keiskemma and Tyhume rivers respectively. Our finding revealed that 410 (48.58 percent) and 23 (2.7 percent) of the isolates were confirmed to be A. baumannii and A. nosocomalis respectively. Also, 308 (75.12 percent percent) A. baumannii and 3 (13.04 percent) A. nosocomialis isolates exhibited one or more virulence genes out of the seven tested, whereas 102 (24.88 percent) and 20 (86.95 percent) of the A. baumannii and A. nosocomialis isolates did not harbour any virulence gene. Additionally, OmpA was the most prevalent (p<0.05) virulence gene found in A. baumannii with 69 (45.10 percent), 52 (50.98 percent) and 77 (49.68 percent) isolates from Great Fish, Keiskamma and Tyhume rivers respectively. The rates of susceptibilities of A. baumannii and A. nosocomialis to the antibiotics followed the order; Piperacillin-tazobactam (72.8 percent ; 73.9 percent), Ceftazidime (70.5 percent ; 91.3 percent), Cefotaxime (16.8 percent ; 17.4 percent), Cefepime (88.5 percent ; 95.7 percent), Imipenem (95.9 percent ; 100 percent ), Meropenem (92.7 percent ; 91.3 percent), Amikacin (97.6 percent ; 91.3 percent), Gentamicin (89.8 percent ; 87 percent), Polymyxin B (84.4 percent ; 91.3 percent), Tetracycline (74.7 percent ; 78.3 percent), Ciprofloxacin (75.9 percent ; 78.3 percent) and Trimethoprim/sulfamethoxazole (74.0 percent ; 73.9 percent) respectively. Both A. baumannii and A. nosocomialis were highly susceptible to all the antimicrobials tested except cefotaxime where 64 percent and 78 percent intermediate responses were observed in the species. At least 10 isolates of A. baumannii were resistant against each of the antibiotics used. The modal multiple antibiotics resistance phenotypes (MARPs) for Acinetobacter spp. was MARP 3 (29.87 percent) and the least was MARP 10 and 11 (2.6 percent each). The antimicrobial resistance index (ARI) was higher at two sampling sites KE2 (0.33) and TY1 (0.22). Similarly, MARI showed that sampling sites KE2 was a hotspot for multidrug-resistant Acinetobacter spp. Of the five classes of ARGs studied, there was a widespread of β-lactamases (blaTEM) in the two Acinetobacter species, followed by sul2, which were detected in 67 (63.2 percent) and 44 (49.4 percent) isolates respectively, across the rivers studied. We conclude that aquatic resources of the study community are important reservoirs of pathogenic Acinetobacter species and antibiotic resistance determinants. The occurrence of clinically-important Acinetobacter species suggests possible contamination of these selected rivers which are consumed by humans and livestock, as well as being used for irrigation system, and this constitutes a risk to public health. It also shows that A. baumannii and A. nosocomialis can thrive in the aquatic environment. This study suggests that direct utilization of water from these sources for domestic and other purposes without any form of pre-treatment should be avoided. It is, therefore, necessary for regulatory authorities to monitor the release of domestic and industrial wastewater into these water bodies in order to prevent outbreaks of epidemics. , Thesis (PhD) (Microbiology) -- University of Fort Hare, 2019
- Full Text:
- Date Issued: 2019-09
Synthesis and biolgical screening of potential plasmodium falciparum DXR inhibitors
- Authors: Adeyemi, Christiana Modupe
- Date: 2017-04
- Subjects: Plasmodium falciparum , Enzyme inhibitors , Malaria , Antimalarials , Drug development , Malaria -- Chemotherapy , Isopentenoids -- Synthesis , Fosmidomycin , 1-Deoxy-D-xylulose 5-phosphate
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/61790 , vital:28060
- Description: The non-mevalonate isoprenoid pathway, also known as the 1-deoxy-D-xylulose-5- phosphate DXP pathway, is absent in humans, but present in the anopheles mosquito responsible for the transmission of malaria. DXP reductoisomerase - a key enzyme in the DXP pathway in Plasmodium falciparum (PfDXR) has been identified as a target for the design of novel anti-malarial drugs. Fosmidomycin and its acetyl analogue (FR900098) are known to be inhibitors of PfDXR and, in this study, synthetic variations of the fosmidomycin scaffold have led to four series of novel analogues. Particular attention has been centred on the introduction of various substituted benzyl groups in each of these series in order to occupy a recently discovered vacant pocket in the PfDXR active-site and thus enhance ligand-enzyme binding. In the process 160 ligands and precursors have been prepared, no less than 119 of them novel. Fistly, a series of C-benzylated phosphonate esters and phosphonic acids were synthesised, in which the fosmidomycin hydroxamate Mg2+- coordinating moiety was replaced by an amide funtionality and the number of methylene groups in the “hydrophobic patch” between the phosphonate and the hydroxamate moiety was decreased from two to one. Several approaches were explored for this series, the most successful involving reaction of 3- substituted anilines with a-bromo propanoic acid in the presence of the coupling agent 1,1'- carbonyldiimidazole (CDI), followed by Michaelis-Arbuzov phosphonation using triethyl phosphite. Reaction of the resulting chiral phosphonate esters with bromotrimethylsilane gave the corresponding phosphonic acids in good yields. In order to obviate chirality issues, a second series of potential “reverse” fosmidomycin analogues was synthesised by replacing the methylene group adjacent to the the phosphonate moiety with a nitrogen atom. Deprotonation, alkylation and phosphorylation of various amines gave diethyl #-benzylphosphoramidate ester intermediate. Aza-Michael addition of these intermediates, followed by hydrolysis gave the corresponding carboxylic acids which could be reacted with different hydroxylamine hydrochloride derivatives to afford the novel hydroxamic acid derivatives in good yields. Thirdly, a series of a novel #-benzylated phosphoramidate derivatives were prepared as aza- FR900098 analogues. Alkylation of different amines using bromoacetalde-hyde diethylacetal gave a series of N-benzyl-2,2-diethoxyethylamine compounds, which were then elaborated via a futher six steps to afford novel #-benzylated phosphoramidate derivatives. Finally, in order to ensure syn-orientation of the donor atoms in the Mg - coordinating group and, at the same time, introduce conformational constraints in the ligand, the hydrophobic patch and the hydroxamate moiety were replaced by cyclic systems. Several approaches towards the synthesis of such conformationally constrained phosphoramidate analogues from maleic anhydride led to the unexpected isolation of an unprecedented acyclic furfuryl compound, and 1H NMR and DFT-level theoretical studies have been initiated to explore the reaction sequence. A series of #-benzylated phosphoramidate derivatives containing dihydroxy aromatic rings (as the conformationally constrained groups) to replace the hydroxamate moiety, were successfully obtained in six steps from the starting material, 3,4-dihydroxylbenzaldehyde. While in vitro assays have been conducted on all of the synthesised compounds, and some of the ligands show promising anti-malarial inhibitory activity - most especially the conformationally constrained cyclic #-benzylated phosphoramidate series. Interestingly, a number of these compounds has also shown activity against T.brucei - the causative agent of sleeping sickness. In silico docking studies of selected compounds has revealed the capacity of some of the ligands to bind effectively in the PfDXR active-site with the newly introduced benzyl group occupying the adjacent vacant pocket. The physico-chemical properties of these ligands were also explored in order to predict the oral-bioavailability. Most of the ligands obeyed the Lipinski rule of 5, while QSAR methods have been used in an attempt to correlate structural variations and calculated molecular properties with the bioassay data. , Thesis (PhD) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017-04
- Authors: Adeyemi, Christiana Modupe
- Date: 2017-04
- Subjects: Plasmodium falciparum , Enzyme inhibitors , Malaria , Antimalarials , Drug development , Malaria -- Chemotherapy , Isopentenoids -- Synthesis , Fosmidomycin , 1-Deoxy-D-xylulose 5-phosphate
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/61790 , vital:28060
- Description: The non-mevalonate isoprenoid pathway, also known as the 1-deoxy-D-xylulose-5- phosphate DXP pathway, is absent in humans, but present in the anopheles mosquito responsible for the transmission of malaria. DXP reductoisomerase - a key enzyme in the DXP pathway in Plasmodium falciparum (PfDXR) has been identified as a target for the design of novel anti-malarial drugs. Fosmidomycin and its acetyl analogue (FR900098) are known to be inhibitors of PfDXR and, in this study, synthetic variations of the fosmidomycin scaffold have led to four series of novel analogues. Particular attention has been centred on the introduction of various substituted benzyl groups in each of these series in order to occupy a recently discovered vacant pocket in the PfDXR active-site and thus enhance ligand-enzyme binding. In the process 160 ligands and precursors have been prepared, no less than 119 of them novel. Fistly, a series of C-benzylated phosphonate esters and phosphonic acids were synthesised, in which the fosmidomycin hydroxamate Mg2+- coordinating moiety was replaced by an amide funtionality and the number of methylene groups in the “hydrophobic patch” between the phosphonate and the hydroxamate moiety was decreased from two to one. Several approaches were explored for this series, the most successful involving reaction of 3- substituted anilines with a-bromo propanoic acid in the presence of the coupling agent 1,1'- carbonyldiimidazole (CDI), followed by Michaelis-Arbuzov phosphonation using triethyl phosphite. Reaction of the resulting chiral phosphonate esters with bromotrimethylsilane gave the corresponding phosphonic acids in good yields. In order to obviate chirality issues, a second series of potential “reverse” fosmidomycin analogues was synthesised by replacing the methylene group adjacent to the the phosphonate moiety with a nitrogen atom. Deprotonation, alkylation and phosphorylation of various amines gave diethyl #-benzylphosphoramidate ester intermediate. Aza-Michael addition of these intermediates, followed by hydrolysis gave the corresponding carboxylic acids which could be reacted with different hydroxylamine hydrochloride derivatives to afford the novel hydroxamic acid derivatives in good yields. Thirdly, a series of a novel #-benzylated phosphoramidate derivatives were prepared as aza- FR900098 analogues. Alkylation of different amines using bromoacetalde-hyde diethylacetal gave a series of N-benzyl-2,2-diethoxyethylamine compounds, which were then elaborated via a futher six steps to afford novel #-benzylated phosphoramidate derivatives. Finally, in order to ensure syn-orientation of the donor atoms in the Mg - coordinating group and, at the same time, introduce conformational constraints in the ligand, the hydrophobic patch and the hydroxamate moiety were replaced by cyclic systems. Several approaches towards the synthesis of such conformationally constrained phosphoramidate analogues from maleic anhydride led to the unexpected isolation of an unprecedented acyclic furfuryl compound, and 1H NMR and DFT-level theoretical studies have been initiated to explore the reaction sequence. A series of #-benzylated phosphoramidate derivatives containing dihydroxy aromatic rings (as the conformationally constrained groups) to replace the hydroxamate moiety, were successfully obtained in six steps from the starting material, 3,4-dihydroxylbenzaldehyde. While in vitro assays have been conducted on all of the synthesised compounds, and some of the ligands show promising anti-malarial inhibitory activity - most especially the conformationally constrained cyclic #-benzylated phosphoramidate series. Interestingly, a number of these compounds has also shown activity against T.brucei - the causative agent of sleeping sickness. In silico docking studies of selected compounds has revealed the capacity of some of the ligands to bind effectively in the PfDXR active-site with the newly introduced benzyl group occupying the adjacent vacant pocket. The physico-chemical properties of these ligands were also explored in order to predict the oral-bioavailability. Most of the ligands obeyed the Lipinski rule of 5, while QSAR methods have been used in an attempt to correlate structural variations and calculated molecular properties with the bioassay data. , Thesis (PhD) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017-04
Effects of the use of manipulative materials on grade nine learners’ performance in fractions in public high schools in Chris Hani West Education District, South Africa
- Authors: Adom, George
- Date: 2020-01
- Subjects: Mathematics -- Study and teaching -- Activity programs , Acalculia in children
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19371 , vital:43058
- Description: The purpose of this study was to investigate the effects of the use of manipulative concrete materials on grade 9 learners’ performance in fractions in public high schools in Chris Hani west education district, in the Eastern Cape Province of the Republic of South Africa. Two hundred and fifty (250) grade nine (9) learners, whose ages ranged between 13-16 years, and ten (10) educators teaching grade nine mathematics, were selected from 40 public high schools with the use of stratified, systematic random sampling, convenience and purposive sampling methods. One hundred and twenty-five (125) learners were put into the experimental group, and another one hundred and twenty-five (125) learners were put into a control group through systematic random sampling method. Pre-test, Post-test, and Control group quasi-experimental design were used as research designs to collect data. Two research instruments were developed. These included: A Fractions Achievement Test (FAT), and Students Questionnaire on Manipulative Concrete Materials (SQMCM). The experimental group were taught with the Manipulative Concrete Materials (Cuisenaire rods, Fraction bar/Fraction title, Paper folding and Computer assisted manipulative), whilst the control group was taught through the lecture method. Four (4) null hypotheses were generated and tested at 0.05 level of significance. The data collected were analysed using Analysis of Covariance (ANCOVA) to find the Mean, Standard Deviation and t-test. The mean and standard deviation were used to compare the pre-test and post-test results between the Experimental group and the Control group. The analysed results of the means, standard deviations and t-tests were used to reject the null hypotheses. The analysed results were illustrated as followed: Cuisenaire rods pre-test (mean = 8.372, SD=1.770), post-test (mean = 12,428, SD=4.732), t=13,024 p< 0.05. Hypothesis (H01) was rejected : Fraction tiles/fraction bars pre-test (mean = 8.372, SD=1.770), post-test (mean = 11,42, SD=3.67), t=12,10 p< 0.05. Hypothesis (H02) was rejected : Paper folding pre-test (mean = 8.372, SD=1.770), post-test (mean = 11,792, SD=4.256), t=12,024 p< 0.05. Hypothesis (H03) was rejected : Computer assisted manipulative pre-test (mean = 8.372, SD=1.770), post-test (mean = 12,212, SD=4.569), t=12,801 p< 0.05. Hypothesis (H04) was also rejected. The comparison of the mean scores and iv standard deviation between the Experimental groups and Control groups indicated that there was no significant difference in the Pre-test in all cases. On the other hand, the mean scores and standard deviations between the Experimental group and Control group in the Post-test showed a vast difference in all cases. There were improvement in the mean scores, and slightly difference in the standard deviations in the Experimental groups, whilst there were drops in the mean scores and standard deviations of the Control groups in all cases. From the studies, there was an indication that manipulative concrete materials have significant effects on grade nine learner’s performance in fractions. It was therefore suggested that manipulative concrete materials should be incorporated into the instructions of fractions in mathematics. , Thesis (PhD) -- Faculty of Education, 2020
- Full Text:
- Date Issued: 2020-01
- Authors: Adom, George
- Date: 2020-01
- Subjects: Mathematics -- Study and teaching -- Activity programs , Acalculia in children
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19371 , vital:43058
- Description: The purpose of this study was to investigate the effects of the use of manipulative concrete materials on grade 9 learners’ performance in fractions in public high schools in Chris Hani west education district, in the Eastern Cape Province of the Republic of South Africa. Two hundred and fifty (250) grade nine (9) learners, whose ages ranged between 13-16 years, and ten (10) educators teaching grade nine mathematics, were selected from 40 public high schools with the use of stratified, systematic random sampling, convenience and purposive sampling methods. One hundred and twenty-five (125) learners were put into the experimental group, and another one hundred and twenty-five (125) learners were put into a control group through systematic random sampling method. Pre-test, Post-test, and Control group quasi-experimental design were used as research designs to collect data. Two research instruments were developed. These included: A Fractions Achievement Test (FAT), and Students Questionnaire on Manipulative Concrete Materials (SQMCM). The experimental group were taught with the Manipulative Concrete Materials (Cuisenaire rods, Fraction bar/Fraction title, Paper folding and Computer assisted manipulative), whilst the control group was taught through the lecture method. Four (4) null hypotheses were generated and tested at 0.05 level of significance. The data collected were analysed using Analysis of Covariance (ANCOVA) to find the Mean, Standard Deviation and t-test. The mean and standard deviation were used to compare the pre-test and post-test results between the Experimental group and the Control group. The analysed results of the means, standard deviations and t-tests were used to reject the null hypotheses. The analysed results were illustrated as followed: Cuisenaire rods pre-test (mean = 8.372, SD=1.770), post-test (mean = 12,428, SD=4.732), t=13,024 p< 0.05. Hypothesis (H01) was rejected : Fraction tiles/fraction bars pre-test (mean = 8.372, SD=1.770), post-test (mean = 11,42, SD=3.67), t=12,10 p< 0.05. Hypothesis (H02) was rejected : Paper folding pre-test (mean = 8.372, SD=1.770), post-test (mean = 11,792, SD=4.256), t=12,024 p< 0.05. Hypothesis (H03) was rejected : Computer assisted manipulative pre-test (mean = 8.372, SD=1.770), post-test (mean = 12,212, SD=4.569), t=12,801 p< 0.05. Hypothesis (H04) was also rejected. The comparison of the mean scores and iv standard deviation between the Experimental groups and Control groups indicated that there was no significant difference in the Pre-test in all cases. On the other hand, the mean scores and standard deviations between the Experimental group and Control group in the Post-test showed a vast difference in all cases. There were improvement in the mean scores, and slightly difference in the standard deviations in the Experimental groups, whilst there were drops in the mean scores and standard deviations of the Control groups in all cases. From the studies, there was an indication that manipulative concrete materials have significant effects on grade nine learner’s performance in fractions. It was therefore suggested that manipulative concrete materials should be incorporated into the instructions of fractions in mathematics. , Thesis (PhD) -- Faculty of Education, 2020
- Full Text:
- Date Issued: 2020-01
Ethics of climate change: a normative account
- Authors: Afolabi, Abiodun Paul
- Date: 2021-10-29
- Subjects: Climatic changes Senegal Saint-Louis , Climatic changes Moral and ethical aspects , Cultural property Senegal Saint-Louis , Ethics Senegal Saint-Louis , Applied ethics , Environmental justice Senegal Saint-Louis , Philosophy, African , Normativity (Ethics)
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/192864 , vital:45272 , 10.21504/10962/192864
- Description: Consider, for instance, you and your family have lived around a place where you enjoyed the flora and fauna of the land as well as the natural environment. Fishing and farming were pleasant activities for your family, and anyone in the community not only to survive but thrive. Your neighbours and the people in the community pride themselves so much in their farming abilities and fishing techniques. Suddenly things start taking a different turn because of rising sea level and changing weather pattern. First, your land began to give way because of sweeping erosion, and later the riverbank serving the community starts drying up. Your neighbour could not hold their own in this grim condition as they started relocating. You even witnessed some of your family and friends leaving the community and you later heard that they have become climate refugees. To put it all together, you were told that what you are experiencing is one of climate change effects. You were told that the loss of the place that you once cherished is not an act of God but the result of the reckless flaring of greenhouse gasses harmful to the environment by some powerful but polluting nations. What will you do? This might sound like a fairy tale. In reality, this is the story of the people of Saint Louis Atlantic Coasts in Senegal, captured by the Global Climate Change Alliance Plus Initiative.1 Their situation has been described as ‘living on the edge’ because for centuries, Saint Louis Atlantic Coasts, home to around 230,000 inhabitants, also known as the ‘Venice of Africa’ has been protected from the pounding Atlantic waves by the ‘Langue de Barbarie,’ a narrow, 30 km peninsula at the mouth of the Senegal river. However, the low-lying sandy spit of land along this World Heritage site is itself rapidly disappearing in the present. This is the consequence of a changing climate and other man-made problems such as illegal sand-mining and over-development. Today, the southern part of the Langue de Barbarie is an island, and the village of Doune Baba Dieye is under more than a metre of water. The villagers have become climate refugees, forced to live in temporary camps on the mainland. Not only have they lost their homes, but they have also lost significant cultural heritage like the farming and fishing culture tied to this place. The ethical considerations that emerge from climate change impacts on the world’s cultural heritage are varied. However, it seems not as self-evident in the way that research on climate change ethics has been framed around economic interest and direct threats to human life and other species. Even when they mention climate impacts on heritage sites around the world, those of Africans have been side-lined. For instance, the impact of climate change on small island nations like Tuvalu, Kiribati2 have gained much traction in climate change discourse, but we do not get to see stories of Africans whose cherished cultural heritage are affected by climate despoliation. How do we respond to this intractable challenge? This is a question of justice and, to be more precise, climate justice. Many principles and proposals for climate justice have been put forward, but the insufficient attention to the vulnerabilities or loss of cultural heritage values of Africans, which is a critical aspect of their social realities, make these theories less persuasive on a global level. This thesis, then, fills this gap in the literature by suggesting that the failure to take cognizance of the injustice in neglecting cultural heritage values when dealing with the burden of climate change is the effect of three problems. One, the value of culture is less understood in this environmental age. Hence, cultural values are excluded or made to be secondary in consideration of principles of climate justice. Second, the idea of Personhood has been neglected in climate ethics and climate justice discourse. Yet, this idea of Personhood can be an enabler of climate justice in that a realization of the significance of cultural heritage to the wellness of the human persons in Africa, makes it loss morally reprehensible. Third, those whose cultural heritage is significantly affected do not get represented in the debate about sharing the burden of climate change. This dissertation thereby builds upon the general findings of the past about anthropogenic climate change, its causes and consequences. Adopting a discursive normative framework, I also address the significance of cultural heritage in this contemporary environmental age and discuss the global justice implications of cultural heritage loss to climate change. This dissertation further provides a critique of mainstream climate justice theories, especially their marginalization of the cultural dimension of climate change. In this regard, the metaphor - ‘cultural storm’ was deployed to argue that climate justice discourses have neither factored the deep socio-cultural impact of climate change nor do they draw on the cultural understanding of justice in putting forward their theories. Given the nature of the indirect, cumulative, and interconnected invisible losses to cultural heritage from climate change, it seems unlikely that they can be addressed by simple tweaks of the climate justice status quo. This dissertation proposes that the idea of personhood in African philosophy, can be conceived to ensure climate justice live up to its expectations in a world of diverse persons dealing with a complex phenomenon like climate change. It argues that a cultural dimension of climate ethics has implications for how mitigation, adaptation and compensation plans should be furthered for global climate justice. At the foundation of my argument, I suggest that what is needed in climate justice discourse is a commitment to explore new and innovative alternatives that will produce an inclusive global climate treaty that is sensitive to the cultural heritage assets that is destroyed by climate change in Africa. This will require a multi-dimensional framework that allows fundamentally different kinds of values and benefits to be given equal visibility and standing in global climate negotiations. The dissertation proceeds in six chapters. In the first chapter, I discuss how climate change denies, damage and destroys cultural heritage values in Africa and argue that it is unjust to ignore this dimension of climate change impact, particularly on the African continent. In the second chapter, I critically discuss the normative value of cultural heritage in an environmentally sustainable and morally appropriate way for this global age. I argue that what is lost when climate change affects cultural heritage is a significant cultural asset that ought to be seriously considered in climate ethics. The third chapter addresses the global justice implications of the destruction of Africa's cultural heritage by climate change that must be paid attention to. In chapter four, I evaluate the plausibility of some of the mainstream climate justice proposals. I offered a different possible critique of current approaches to climate justice to show how they have furthered cultural injustice. The critique of current climate justice theories that I offer, stems from an uninspiring approach that belies logic permitting the sacrificing of that which is connected to others wellbeing as well as the implicit assumptions and the limitation of the idea of justice that undergird these climate justice theories. I offer, in chapter five, a plausible climate ethics theory that recognizes culturally embedded ideas of justice and empower all stakeholders to build by themselves, lives that are, in the light of these ideas, deemed to be adversely impacted by climate change. This theory advances a socio-cultural perspective to climate change which could provide a nuanced basis for understanding and addressing global climate duties that will be sensitive to the loss of cultural heritage. Specifically, I apply the African conception of personhood, to provide a normative basis for a different but intuitive understanding of the cultural dimension of climate ethics. In the final chapter, I discuss how this theory can be applied to rethink current global responses in the form of mitigation, adaptation and compensation in such a way that it takes seriously the impacts of climate change on Africa’s cultural heritage and values. , Thesis (PhD) -- Faculty of Humanities, Philosophy, 2021
- Full Text:
- Date Issued: 2021-10-29
- Authors: Afolabi, Abiodun Paul
- Date: 2021-10-29
- Subjects: Climatic changes Senegal Saint-Louis , Climatic changes Moral and ethical aspects , Cultural property Senegal Saint-Louis , Ethics Senegal Saint-Louis , Applied ethics , Environmental justice Senegal Saint-Louis , Philosophy, African , Normativity (Ethics)
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/192864 , vital:45272 , 10.21504/10962/192864
- Description: Consider, for instance, you and your family have lived around a place where you enjoyed the flora and fauna of the land as well as the natural environment. Fishing and farming were pleasant activities for your family, and anyone in the community not only to survive but thrive. Your neighbours and the people in the community pride themselves so much in their farming abilities and fishing techniques. Suddenly things start taking a different turn because of rising sea level and changing weather pattern. First, your land began to give way because of sweeping erosion, and later the riverbank serving the community starts drying up. Your neighbour could not hold their own in this grim condition as they started relocating. You even witnessed some of your family and friends leaving the community and you later heard that they have become climate refugees. To put it all together, you were told that what you are experiencing is one of climate change effects. You were told that the loss of the place that you once cherished is not an act of God but the result of the reckless flaring of greenhouse gasses harmful to the environment by some powerful but polluting nations. What will you do? This might sound like a fairy tale. In reality, this is the story of the people of Saint Louis Atlantic Coasts in Senegal, captured by the Global Climate Change Alliance Plus Initiative.1 Their situation has been described as ‘living on the edge’ because for centuries, Saint Louis Atlantic Coasts, home to around 230,000 inhabitants, also known as the ‘Venice of Africa’ has been protected from the pounding Atlantic waves by the ‘Langue de Barbarie,’ a narrow, 30 km peninsula at the mouth of the Senegal river. However, the low-lying sandy spit of land along this World Heritage site is itself rapidly disappearing in the present. This is the consequence of a changing climate and other man-made problems such as illegal sand-mining and over-development. Today, the southern part of the Langue de Barbarie is an island, and the village of Doune Baba Dieye is under more than a metre of water. The villagers have become climate refugees, forced to live in temporary camps on the mainland. Not only have they lost their homes, but they have also lost significant cultural heritage like the farming and fishing culture tied to this place. The ethical considerations that emerge from climate change impacts on the world’s cultural heritage are varied. However, it seems not as self-evident in the way that research on climate change ethics has been framed around economic interest and direct threats to human life and other species. Even when they mention climate impacts on heritage sites around the world, those of Africans have been side-lined. For instance, the impact of climate change on small island nations like Tuvalu, Kiribati2 have gained much traction in climate change discourse, but we do not get to see stories of Africans whose cherished cultural heritage are affected by climate despoliation. How do we respond to this intractable challenge? This is a question of justice and, to be more precise, climate justice. Many principles and proposals for climate justice have been put forward, but the insufficient attention to the vulnerabilities or loss of cultural heritage values of Africans, which is a critical aspect of their social realities, make these theories less persuasive on a global level. This thesis, then, fills this gap in the literature by suggesting that the failure to take cognizance of the injustice in neglecting cultural heritage values when dealing with the burden of climate change is the effect of three problems. One, the value of culture is less understood in this environmental age. Hence, cultural values are excluded or made to be secondary in consideration of principles of climate justice. Second, the idea of Personhood has been neglected in climate ethics and climate justice discourse. Yet, this idea of Personhood can be an enabler of climate justice in that a realization of the significance of cultural heritage to the wellness of the human persons in Africa, makes it loss morally reprehensible. Third, those whose cultural heritage is significantly affected do not get represented in the debate about sharing the burden of climate change. This dissertation thereby builds upon the general findings of the past about anthropogenic climate change, its causes and consequences. Adopting a discursive normative framework, I also address the significance of cultural heritage in this contemporary environmental age and discuss the global justice implications of cultural heritage loss to climate change. This dissertation further provides a critique of mainstream climate justice theories, especially their marginalization of the cultural dimension of climate change. In this regard, the metaphor - ‘cultural storm’ was deployed to argue that climate justice discourses have neither factored the deep socio-cultural impact of climate change nor do they draw on the cultural understanding of justice in putting forward their theories. Given the nature of the indirect, cumulative, and interconnected invisible losses to cultural heritage from climate change, it seems unlikely that they can be addressed by simple tweaks of the climate justice status quo. This dissertation proposes that the idea of personhood in African philosophy, can be conceived to ensure climate justice live up to its expectations in a world of diverse persons dealing with a complex phenomenon like climate change. It argues that a cultural dimension of climate ethics has implications for how mitigation, adaptation and compensation plans should be furthered for global climate justice. At the foundation of my argument, I suggest that what is needed in climate justice discourse is a commitment to explore new and innovative alternatives that will produce an inclusive global climate treaty that is sensitive to the cultural heritage assets that is destroyed by climate change in Africa. This will require a multi-dimensional framework that allows fundamentally different kinds of values and benefits to be given equal visibility and standing in global climate negotiations. The dissertation proceeds in six chapters. In the first chapter, I discuss how climate change denies, damage and destroys cultural heritage values in Africa and argue that it is unjust to ignore this dimension of climate change impact, particularly on the African continent. In the second chapter, I critically discuss the normative value of cultural heritage in an environmentally sustainable and morally appropriate way for this global age. I argue that what is lost when climate change affects cultural heritage is a significant cultural asset that ought to be seriously considered in climate ethics. The third chapter addresses the global justice implications of the destruction of Africa's cultural heritage by climate change that must be paid attention to. In chapter four, I evaluate the plausibility of some of the mainstream climate justice proposals. I offered a different possible critique of current approaches to climate justice to show how they have furthered cultural injustice. The critique of current climate justice theories that I offer, stems from an uninspiring approach that belies logic permitting the sacrificing of that which is connected to others wellbeing as well as the implicit assumptions and the limitation of the idea of justice that undergird these climate justice theories. I offer, in chapter five, a plausible climate ethics theory that recognizes culturally embedded ideas of justice and empower all stakeholders to build by themselves, lives that are, in the light of these ideas, deemed to be adversely impacted by climate change. This theory advances a socio-cultural perspective to climate change which could provide a nuanced basis for understanding and addressing global climate duties that will be sensitive to the loss of cultural heritage. Specifically, I apply the African conception of personhood, to provide a normative basis for a different but intuitive understanding of the cultural dimension of climate ethics. In the final chapter, I discuss how this theory can be applied to rethink current global responses in the form of mitigation, adaptation and compensation in such a way that it takes seriously the impacts of climate change on Africa’s cultural heritage and values. , Thesis (PhD) -- Faculty of Humanities, Philosophy, 2021
- Full Text:
- Date Issued: 2021-10-29
The changing face of NEPAD and the challenges of facilitating sub-regional economic integration on the ECOWAS platform
- Authors: Agomuonso, Udo Robertson
- Date: 2013-03
- Subjects: New Partnership for Africa's Development , Economic Community of West African States , Sustainable development -- Africa
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/24783 , vital:63573
- Description: This research is intended to evaluate and study the challenges confronting NEPAD’s quest for sub regional economic integration in the ECOWAS domain. Political and economic integration has been part of African strategy to overcome fragmentation, marginalization and improve the continent’s position in the global political economy. Indeed, Africa needs integration more than any other continent or region in the world and this is why, it has had a fair share of regional integration arrangements all through her history. Unfortunately, these efforts have not paid off in the dimension of desired expectations. When NEPAD was established, it was given regional integration responsibilities, even though it was not a regional organization. It was mandated to drive regional integration in Africa by supporting the regional integration efforts of the regional economic institutions in Africa. After 10 years of existence, African leaders dissolved NEPAD and in its place, instituted the NEPAD Planning and Coordinating Agency (NPCA). This move was orchestrated by the seemingly slow progress made by NEPAD in this direction. NEPAD and ECOWAS has been working together to promote regional integration, but like in most parts of Africa, the challenges has been seemingly intractable. The study is anchored around the principles of integration as presented by the neo-functionalists theorists. Hence, the research attempted to provide an explanation of the performance and non-performance of NEPAD as a regional integration tool, within the confines of the theory. The findings show that while, there has been some level of success in this venture as evidenced by the projects that are on-going in the sub region, the fact remains that NEPAD did not deliver or actually delivered below expectations. However, this situation is reversible as the study submitted that, there is a future for regional integration in West Africa, Africa and the new NPCA, if the African Union pulls the right levers. , Thesis (PhD) -- Faculty of Social Sciences and Humanities, 2013
- Full Text:
- Date Issued: 2013-03
- Authors: Agomuonso, Udo Robertson
- Date: 2013-03
- Subjects: New Partnership for Africa's Development , Economic Community of West African States , Sustainable development -- Africa
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/24783 , vital:63573
- Description: This research is intended to evaluate and study the challenges confronting NEPAD’s quest for sub regional economic integration in the ECOWAS domain. Political and economic integration has been part of African strategy to overcome fragmentation, marginalization and improve the continent’s position in the global political economy. Indeed, Africa needs integration more than any other continent or region in the world and this is why, it has had a fair share of regional integration arrangements all through her history. Unfortunately, these efforts have not paid off in the dimension of desired expectations. When NEPAD was established, it was given regional integration responsibilities, even though it was not a regional organization. It was mandated to drive regional integration in Africa by supporting the regional integration efforts of the regional economic institutions in Africa. After 10 years of existence, African leaders dissolved NEPAD and in its place, instituted the NEPAD Planning and Coordinating Agency (NPCA). This move was orchestrated by the seemingly slow progress made by NEPAD in this direction. NEPAD and ECOWAS has been working together to promote regional integration, but like in most parts of Africa, the challenges has been seemingly intractable. The study is anchored around the principles of integration as presented by the neo-functionalists theorists. Hence, the research attempted to provide an explanation of the performance and non-performance of NEPAD as a regional integration tool, within the confines of the theory. The findings show that while, there has been some level of success in this venture as evidenced by the projects that are on-going in the sub region, the fact remains that NEPAD did not deliver or actually delivered below expectations. However, this situation is reversible as the study submitted that, there is a future for regional integration in West Africa, Africa and the new NPCA, if the African Union pulls the right levers. , Thesis (PhD) -- Faculty of Social Sciences and Humanities, 2013
- Full Text:
- Date Issued: 2013-03
Integration of nanostructured metal sulfides into titanium (iv) oxide for high performance dye sensitized solar cell
- Authors: Agoro, Adedoyin Mojeed
- Date: 2020-01
- Subjects: Nanostructured materials , Sulfur compounds
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21523 , vital:48857
- Description: The work in this thesis describes synthesis, characterization and integration of nanostructured metal sulfides into titanium (IV) oxide for high performance dye sensitized solar cell. The synthesised single source precursors were evaluated using TGA, FTIR, , UV-Vis, PL,1H and 13CNMR, SEM, EDS, HRTEM, XRD, AFM, Raman, I-V, CV, Bode plot and EIS. TGA revealed the thermal degradation and quantified the mass percentage of metal sulphides as 33percent, 45percent and 27percent for CuS, PbS and SnS nanoparticles, respectively. FTIR analysis showed bands at 1580-1450 cm-1, and 1060-940 cm-1 tentatively assigned to C-N and C-S stretching frequencies correspondingly. The (M-S) stretching was observed at 577-406 cm-1 for the complexes using bis(N-di-isopropyl-N-octyldithiocarbamato) as primary ligands. IR spectra of bis(N-1,4-phenyl-N-(4-morpholinedithiocarbamato) as secondary ligands suggested the presence of (C-N) vibrations at 1508-1513 cm-1 for the complexes and 1507-1584 cm-1 for the ligands. The bands in the region of 973-1030 cm-1 were assigned to the complexes and 974- 983 cm-1 were attributed to the ligands, whereas vibration frequencies at 416-625 cm-1 were Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. tentatively assigned to M-S bond in the complexes. UV-Vis spectroscopy analysis for the complexes and from primary and secondary ligands are between within the range of 338 – 340 nm. PL studies of the primary ligands with metal complexes indicated emissions at 464 nm, 462 nm, 462 nm for Pb(II) and Sn(II), and Cu(II). The presence of secondary ligands was revealed by the absorption peaks at 455, 456 and 457 nm, exhibiting both the signals and chemical constituents of the respective ligands and their corresponding complexes. The electrochemistry in chapters 3 and 4 reveals that phase angle in the Bode plots changes with frequencies for Sn(II) complexes at 58, 57 and 8 respectively. Bode plots showed remarkable electronics of Cu(II) and Pb(II) complex interfaces. The CV curves exhibit two kinds of redox peaks indicating reduction at the negative potentials and oxidation at the positive potentials. The EIS, electrodes produced Rct for Pb(II), Cu(II) and Sn(II) electrodes in chapter 3. Moreover The EIS revealed that Sn(II) sensitizer displaced a stronger chemical capacitance and improved efficiency which could lead to better electron lifetime yield. The obtained CV exhibited anodic and cathodic peaks for Pb(II), connoting a reduction in Pb2+ and oxidation in Pb2-. Bode plot phase angle displayed Sn(II) and Pb(II) with maxima phase, indicating the presence of time constants of the electrode processes in Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes. From the results in chapter 4, the XRD patterns exhibited good crystalline nature of CuS as a result of sharp and strong diffraction peaks obtained. There are eight peaks of 2θ angle between 26° and 79° relating to orthorhombic structure of SnS. While PbS has a cubic structure with polycrystalline nature, PbS/HDA and PbS both correspond to their crystalline planes of (200), (111), (220), (311), (222), (400), (331), (420) and (422) affirming to PbS QDs structure. SnS/HDA and SnS photosensitizers displayed eleven peaks between the values of 27.02° to 66.05° for SnS/HDA and 26.03° to 66.04° for SnS, in confirming the orthorhombic structure. SEM analysis revealed hexagonal structure for CuS, while PbS and SnS exhibited mesoporous nanostructures with spherical nanoparticles. HRTEM images indicated spherical nano-particles with particle sizes in the range of 3.14 - 44.39 nm. The outcome of HRTEM analysis revealed crystallite sizes varying as 10.90 – 11.57 nm, 3.14 – 5.95 nm and 14.96 – 44.39 nm for the CuS, PbS and SnS, originated from the primary ligands. HRTEM images originating from the Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes indicated spherical nano-particles with particle sizes of 3.14 - 44.39 nm. Raman images in chapter 5 revealed the presence of Raman active modes of E2g 66 cm-1 and 304, cm-1 and E1g 627 cm-1 and 706 cm-1 for CuS, the active modes of TO 65 cm-1 and 2LO 626 cm-1 for PbS, active modes of B1g 69 cm-1 for SnS and 266 cm-1 for Ag. From the AFM results in chapter 5, CuS photosensitizer displayed a smooth surface and particle estimated to be 0.50 μm and height profile of 12percent. The PbS photosensitizer exhibited particle size of 1.82 μm and 0.654 μm for PbS/HDA, depicting a regular crystal growth rate. The size distribution of SnS nanoparticle at 357 nm connotes smooth surface and good compactness on the substrate. However, SnS/HDA at 122 nm displayed shape and size of non-symmetrical particles. AFM analysis in chapter 8 revealed good size roughness for CuS film. PbS exhibited particle size of 365 nm and size height of 18percent as the smoothest film, while PbS/HDA revealed 1.22 um size with 9percent size height. The evaluated particle sizes varied as 0.11- 1.18 um for SnS/HDA and 0.054 – 0.54 um for SnS films grown at 360 ℃ with size height of 16.8 and 8.4percent. The I-V efficiency obtained indicated that the CuS exhibited a much better efficiency in the QDSCs with higher Voc and the highest η being 2.85percent compared to CuS/HDA and Cu(II). High JSC of 11 mA/cm has been observed in the PbS/HDA QDSSCs, compared to the PbS and Pb(II) cells. The SnS/HDA exhibited a better performance compared to SnS and Sn(II) sensitizers due to the presence of HDA capping agent. , Thesis (MSc) -- Faculty of Science and Agriculture, 2020
- Full Text:
- Date Issued: 2020-01
- Authors: Agoro, Adedoyin Mojeed
- Date: 2020-01
- Subjects: Nanostructured materials , Sulfur compounds
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21523 , vital:48857
- Description: The work in this thesis describes synthesis, characterization and integration of nanostructured metal sulfides into titanium (IV) oxide for high performance dye sensitized solar cell. The synthesised single source precursors were evaluated using TGA, FTIR, , UV-Vis, PL,1H and 13CNMR, SEM, EDS, HRTEM, XRD, AFM, Raman, I-V, CV, Bode plot and EIS. TGA revealed the thermal degradation and quantified the mass percentage of metal sulphides as 33percent, 45percent and 27percent for CuS, PbS and SnS nanoparticles, respectively. FTIR analysis showed bands at 1580-1450 cm-1, and 1060-940 cm-1 tentatively assigned to C-N and C-S stretching frequencies correspondingly. The (M-S) stretching was observed at 577-406 cm-1 for the complexes using bis(N-di-isopropyl-N-octyldithiocarbamato) as primary ligands. IR spectra of bis(N-1,4-phenyl-N-(4-morpholinedithiocarbamato) as secondary ligands suggested the presence of (C-N) vibrations at 1508-1513 cm-1 for the complexes and 1507-1584 cm-1 for the ligands. The bands in the region of 973-1030 cm-1 were assigned to the complexes and 974- 983 cm-1 were attributed to the ligands, whereas vibration frequencies at 416-625 cm-1 were Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. tentatively assigned to M-S bond in the complexes. UV-Vis spectroscopy analysis for the complexes and from primary and secondary ligands are between within the range of 338 – 340 nm. PL studies of the primary ligands with metal complexes indicated emissions at 464 nm, 462 nm, 462 nm for Pb(II) and Sn(II), and Cu(II). The presence of secondary ligands was revealed by the absorption peaks at 455, 456 and 457 nm, exhibiting both the signals and chemical constituents of the respective ligands and their corresponding complexes. The electrochemistry in chapters 3 and 4 reveals that phase angle in the Bode plots changes with frequencies for Sn(II) complexes at 58, 57 and 8 respectively. Bode plots showed remarkable electronics of Cu(II) and Pb(II) complex interfaces. The CV curves exhibit two kinds of redox peaks indicating reduction at the negative potentials and oxidation at the positive potentials. The EIS, electrodes produced Rct for Pb(II), Cu(II) and Sn(II) electrodes in chapter 3. Moreover The EIS revealed that Sn(II) sensitizer displaced a stronger chemical capacitance and improved efficiency which could lead to better electron lifetime yield. The obtained CV exhibited anodic and cathodic peaks for Pb(II), connoting a reduction in Pb2+ and oxidation in Pb2-. Bode plot phase angle displayed Sn(II) and Pb(II) with maxima phase, indicating the presence of time constants of the electrode processes in Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes. From the results in chapter 4, the XRD patterns exhibited good crystalline nature of CuS as a result of sharp and strong diffraction peaks obtained. There are eight peaks of 2θ angle between 26° and 79° relating to orthorhombic structure of SnS. While PbS has a cubic structure with polycrystalline nature, PbS/HDA and PbS both correspond to their crystalline planes of (200), (111), (220), (311), (222), (400), (331), (420) and (422) affirming to PbS QDs structure. SnS/HDA and SnS photosensitizers displayed eleven peaks between the values of 27.02° to 66.05° for SnS/HDA and 26.03° to 66.04° for SnS, in confirming the orthorhombic structure. SEM analysis revealed hexagonal structure for CuS, while PbS and SnS exhibited mesoporous nanostructures with spherical nanoparticles. HRTEM images indicated spherical nano-particles with particle sizes in the range of 3.14 - 44.39 nm. The outcome of HRTEM analysis revealed crystallite sizes varying as 10.90 – 11.57 nm, 3.14 – 5.95 nm and 14.96 – 44.39 nm for the CuS, PbS and SnS, originated from the primary ligands. HRTEM images originating from the Bis(N-1,4-Phenyl-N-Morhpo-dithiocarbamato bis(Mo/1,4-PHDTC) complexes indicated spherical nano-particles with particle sizes of 3.14 - 44.39 nm. Raman images in chapter 5 revealed the presence of Raman active modes of E2g 66 cm-1 and 304, cm-1 and E1g 627 cm-1 and 706 cm-1 for CuS, the active modes of TO 65 cm-1 and 2LO 626 cm-1 for PbS, active modes of B1g 69 cm-1 for SnS and 266 cm-1 for Ag. From the AFM results in chapter 5, CuS photosensitizer displayed a smooth surface and particle estimated to be 0.50 μm and height profile of 12percent. The PbS photosensitizer exhibited particle size of 1.82 μm and 0.654 μm for PbS/HDA, depicting a regular crystal growth rate. The size distribution of SnS nanoparticle at 357 nm connotes smooth surface and good compactness on the substrate. However, SnS/HDA at 122 nm displayed shape and size of non-symmetrical particles. AFM analysis in chapter 8 revealed good size roughness for CuS film. PbS exhibited particle size of 365 nm and size height of 18percent as the smoothest film, while PbS/HDA revealed 1.22 um size with 9percent size height. The evaluated particle sizes varied as 0.11- 1.18 um for SnS/HDA and 0.054 – 0.54 um for SnS films grown at 360 ℃ with size height of 16.8 and 8.4percent. The I-V efficiency obtained indicated that the CuS exhibited a much better efficiency in the QDSCs with higher Voc and the highest η being 2.85percent compared to CuS/HDA and Cu(II). High JSC of 11 mA/cm has been observed in the PbS/HDA QDSSCs, compared to the PbS and Pb(II) cells. The SnS/HDA exhibited a better performance compared to SnS and Sn(II) sensitizers due to the presence of HDA capping agent. , Thesis (MSc) -- Faculty of Science and Agriculture, 2020
- Full Text:
- Date Issued: 2020-01
Investigation of the levels of PBDEs and PCNs in the surface water and sediments from selected waterbodies in the Eastern Cape Province, South Africa
- Agunbiade, Idowu Victoria https://orcid.org/0000-0001-5605-0312
- Authors: Agunbiade, Idowu Victoria https://orcid.org/0000-0001-5605-0312
- Date: 2021-06
- Subjects: Persistent pollutants , Water -- Purification -- Organic compounds removal , Organic water pollutants
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22699 , vital:52660
- Description: Studies have revealed that persistent organic pollutants (POPs) are omnipresent in our environment; almost all human beings have definite levels of POPs in their bodies. Even fetus and embryos are not spared; they have been found to bear certain levels of POPs. So far, there are about 28 chemicals listed as POPs among which are polybrominated diphenyl ethers (PBDEs) and polychlorinated naphthalenes (PCNs). PCN and PBDE distributions have been reported from different sources around the world, but studies relating to PCNs occurrence and distribution in Africa, especially South Africa is still minimal. PBDEs have been reported to cause diabetes, cancer, damage to reproductive system, thyroid, liver and other vital organs in the body, while PCNs have been linked to chloracne (severe skin reactions/lesions) and liver disease (yellow atrophy) in humans, chicken oedema and X-disease in cattle. Hence, this study evaluates PCN levels in water and sediment samples from three waterbodies: North End Lake (NEL), Chatty River (CHA) and Makman Canal (MMC), while PBDE levels was reported in NEL and CHA samples. The three sites are located in Port Elizabeth, Eastern Cape Province (ECP) of South Africa. The lake serves as a recreational resort while the latter two waterbodies are tributaries discharging into the Swartkop Estuary, an important estuary in ECP. Water samples were extracted with C18 cartridges (solid phase), while soxhlet was employed for the extraction of sediments. Water and sediment extricates were purified and quantified with gas chromatography-micro electron capture detector (GC-μECD). Forty-seven (47) water samples and 44 sediment samples were collected in August until December 2020 from six sampling points in NEL, five points in each of CHA and MMC. All the samples were evaluated for physicochemical properties, PBDEs and PCNs using validated standard methods. The sampling period covered three South Africa seasons: August (winter), October (spring) and December (summer). The physicochemical parameters (PP) of NEL water samples for the three seasons generally varied as follows: temperature (15.3–23°C), pH (7.9–10.3), oxidation-reduction potential, ORP (23.4-110 mV), atmospheric pressure, AP (14.52-15.56 PSI), turbidity (15.1–167 NTU), electrical conductivity, EC (114–1291 μS/cm), total dissolved solids, TDS (55-645 mg/L), total suspended solids, TSS (20–107 mg/L) and salinity (0.05–0.65 PSU). All the PPs except for turbidity and TSS are within acceptable limits. NEL sediments had moisture content (MC), organic matter (OM) and organic carbon (OC) in the range of 0.04–8.0percent, 0.08–2.2percent and 0.05–1.8percent, respectively. The sum of eight PCN congeners Σ8PCNs and six PBDE congeners Σ6PBDEs in NEL water samples ranged from 0.164–2.934 μg/L and 0.009-1.025 μg/L individually. The values for Σ8PCNs and Σ6PBDEs in NEL sediment samples varied from 0.991–237 μg/kg and 0.354-28.850 μg/kg, respectively. The calculated hazard quotient (HQ) corresponding to the non-carcinogenic health risk associated with PBDEs in NEL water samples was 2.0×10-3-1.4×10-1, while the TEQ values due to PCNs varied from 6.10×10-7- 3.12×10-3 μg/L in NEL water samples and 3.70×10-5-1.96×10-2 μg/kg dw in sediments. The PP values for CHA water samples include temperature (15.4–22.9°C), pH (7.7–10.5), TDS (991–1771 mg/L), TSS (6–41 mg/L), turbidity (1.0–198 NTU), EC (1981–3542 μS/cm), AP (14.60–14.80 PSI), ORP (-339.1-51.3 mV), and salinity (1.02–1.87 PSU). The EC, TDS and salinity exceeded acceptable values at certain points. The sediments of CHA have MC, OM and OC contents ranging from 0.01-10.2percent, 0.2-1.3percent and 0.1-0.8percent in that order. Sum of Σ8PCNs, Σ6PBDEs in CHA water and sediment samples ranged from 0.026–1.054 μg/L, 0.007-0.079 μg/L and 0.429–1888.468 μg/kg, 0.347-6.468 μg/kg individually. The HQ in CHA water samples was 1.6×10-3-7.7×10-3 and the estimated TEQ was 1.0×10-7-6.62×10-5 μg/L and 1.10×10−5-6.40×10−2 μg/kg in water and sediments, respectively. The temperatures for MMC water samples ranged from 15.6-24.5°C, while other PPs recorded were as follows: pH (8.4-10.2), TDS (943–4002 mg/L), TSS (7-491 mg/L), turbidity (2.9-154.2 NTU), EC (1885-8004 μS/cm), AP (14.53–14.82 PSI), ORP (7.8-130 mV) and salinity (0.96-4.47 PSU). MMC’s sediments recorded MC, OM and OC varying as 0.4- 18.9percent, 0.2-4.5percent and 0.1-2.6percent, respectively across the three seasons. The Σ8PCNs for MMC water and sediment samples were 0.035–0.699 μg/L and 0.260–6744 μg/kg. The TEQ values in MMC water and sediment samples were 1.19×10-7-1.47×10-4 μg/L and 4.43×10−5- 4.19×10−1 μg/kg, respectively. The results are all less than one, and this suggests that the selected water is safe. Results showed that NEL water had highest TEQ, PCN and PBDE concentrations, while MMC sediments recorded maximum TEQ and PCN levels in this study. PBDE concentrations in NEL sediments were above the other site. In conclusion, NEL water was most polluted with both pollutants (PCNs and PBDEs), but MMC sediments contained more PCNs. There is need for the immediate remediation of these selected waterbodies. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-06
- Authors: Agunbiade, Idowu Victoria https://orcid.org/0000-0001-5605-0312
- Date: 2021-06
- Subjects: Persistent pollutants , Water -- Purification -- Organic compounds removal , Organic water pollutants
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22699 , vital:52660
- Description: Studies have revealed that persistent organic pollutants (POPs) are omnipresent in our environment; almost all human beings have definite levels of POPs in their bodies. Even fetus and embryos are not spared; they have been found to bear certain levels of POPs. So far, there are about 28 chemicals listed as POPs among which are polybrominated diphenyl ethers (PBDEs) and polychlorinated naphthalenes (PCNs). PCN and PBDE distributions have been reported from different sources around the world, but studies relating to PCNs occurrence and distribution in Africa, especially South Africa is still minimal. PBDEs have been reported to cause diabetes, cancer, damage to reproductive system, thyroid, liver and other vital organs in the body, while PCNs have been linked to chloracne (severe skin reactions/lesions) and liver disease (yellow atrophy) in humans, chicken oedema and X-disease in cattle. Hence, this study evaluates PCN levels in water and sediment samples from three waterbodies: North End Lake (NEL), Chatty River (CHA) and Makman Canal (MMC), while PBDE levels was reported in NEL and CHA samples. The three sites are located in Port Elizabeth, Eastern Cape Province (ECP) of South Africa. The lake serves as a recreational resort while the latter two waterbodies are tributaries discharging into the Swartkop Estuary, an important estuary in ECP. Water samples were extracted with C18 cartridges (solid phase), while soxhlet was employed for the extraction of sediments. Water and sediment extricates were purified and quantified with gas chromatography-micro electron capture detector (GC-μECD). Forty-seven (47) water samples and 44 sediment samples were collected in August until December 2020 from six sampling points in NEL, five points in each of CHA and MMC. All the samples were evaluated for physicochemical properties, PBDEs and PCNs using validated standard methods. The sampling period covered three South Africa seasons: August (winter), October (spring) and December (summer). The physicochemical parameters (PP) of NEL water samples for the three seasons generally varied as follows: temperature (15.3–23°C), pH (7.9–10.3), oxidation-reduction potential, ORP (23.4-110 mV), atmospheric pressure, AP (14.52-15.56 PSI), turbidity (15.1–167 NTU), electrical conductivity, EC (114–1291 μS/cm), total dissolved solids, TDS (55-645 mg/L), total suspended solids, TSS (20–107 mg/L) and salinity (0.05–0.65 PSU). All the PPs except for turbidity and TSS are within acceptable limits. NEL sediments had moisture content (MC), organic matter (OM) and organic carbon (OC) in the range of 0.04–8.0percent, 0.08–2.2percent and 0.05–1.8percent, respectively. The sum of eight PCN congeners Σ8PCNs and six PBDE congeners Σ6PBDEs in NEL water samples ranged from 0.164–2.934 μg/L and 0.009-1.025 μg/L individually. The values for Σ8PCNs and Σ6PBDEs in NEL sediment samples varied from 0.991–237 μg/kg and 0.354-28.850 μg/kg, respectively. The calculated hazard quotient (HQ) corresponding to the non-carcinogenic health risk associated with PBDEs in NEL water samples was 2.0×10-3-1.4×10-1, while the TEQ values due to PCNs varied from 6.10×10-7- 3.12×10-3 μg/L in NEL water samples and 3.70×10-5-1.96×10-2 μg/kg dw in sediments. The PP values for CHA water samples include temperature (15.4–22.9°C), pH (7.7–10.5), TDS (991–1771 mg/L), TSS (6–41 mg/L), turbidity (1.0–198 NTU), EC (1981–3542 μS/cm), AP (14.60–14.80 PSI), ORP (-339.1-51.3 mV), and salinity (1.02–1.87 PSU). The EC, TDS and salinity exceeded acceptable values at certain points. The sediments of CHA have MC, OM and OC contents ranging from 0.01-10.2percent, 0.2-1.3percent and 0.1-0.8percent in that order. Sum of Σ8PCNs, Σ6PBDEs in CHA water and sediment samples ranged from 0.026–1.054 μg/L, 0.007-0.079 μg/L and 0.429–1888.468 μg/kg, 0.347-6.468 μg/kg individually. The HQ in CHA water samples was 1.6×10-3-7.7×10-3 and the estimated TEQ was 1.0×10-7-6.62×10-5 μg/L and 1.10×10−5-6.40×10−2 μg/kg in water and sediments, respectively. The temperatures for MMC water samples ranged from 15.6-24.5°C, while other PPs recorded were as follows: pH (8.4-10.2), TDS (943–4002 mg/L), TSS (7-491 mg/L), turbidity (2.9-154.2 NTU), EC (1885-8004 μS/cm), AP (14.53–14.82 PSI), ORP (7.8-130 mV) and salinity (0.96-4.47 PSU). MMC’s sediments recorded MC, OM and OC varying as 0.4- 18.9percent, 0.2-4.5percent and 0.1-2.6percent, respectively across the three seasons. The Σ8PCNs for MMC water and sediment samples were 0.035–0.699 μg/L and 0.260–6744 μg/kg. The TEQ values in MMC water and sediment samples were 1.19×10-7-1.47×10-4 μg/L and 4.43×10−5- 4.19×10−1 μg/kg, respectively. The results are all less than one, and this suggests that the selected water is safe. Results showed that NEL water had highest TEQ, PCN and PBDE concentrations, while MMC sediments recorded maximum TEQ and PCN levels in this study. PBDE concentrations in NEL sediments were above the other site. In conclusion, NEL water was most polluted with both pollutants (PCNs and PBDEs), but MMC sediments contained more PCNs. There is need for the immediate remediation of these selected waterbodies. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-06