Stability indicating HPLC-ECD method for the analysis of clarithromycin in pharmaceutical dosage forms: Method scaling versus re-validation.
- Makoni, Pedzisai A, Chikukwa, Mellisa, Khamanga, Sandile M, Walker, Roderick B
- Authors: Makoni, Pedzisai A , Chikukwa, Mellisa , Khamanga, Sandile M , Walker, Roderick B
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183387 , vital:43984 , xlink:href="https://doi.org/10.3390/scipharm87040031"
- Description: An isocratic high-performance liquid chromatographic method using electrochemical detection (HPLC-ECD) for the quantitation of clarithromycin (CLA) was developed using Response Surface Methodology (RSM) based on a Central Composite Design (CCD). The method was validated using International Conference on Harmonization (ICH) guidelines with an analytical run time of 20 min. Method re-validation following a change in analytical column was successful in reducing the analytical run time to 13 min, decreasing solvent consumption thus facilitating environmental and financial sustainability. The applicability of using the United States Pharmacopeia (USP) method scaling approach in place of method re-validation using a column with a different L–designation to the original analytical column, was investigated. The scaled method met all USP system suitability requirements for resolution, tailing factor and % relative standard deviation (RSD). The re-validated and scaled method was successfully used to resolve CLA from manufacturing excipients in commercially available dosage forms. Although USP method scaling is only permitted for columns within the same L-designation, these data suggest that it may also be applicable to columns of different designation.
- Full Text:
- Date Issued: 2019
- Authors: Makoni, Pedzisai A , Chikukwa, Mellisa , Khamanga, Sandile M , Walker, Roderick B
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183387 , vital:43984 , xlink:href="https://doi.org/10.3390/scipharm87040031"
- Description: An isocratic high-performance liquid chromatographic method using electrochemical detection (HPLC-ECD) for the quantitation of clarithromycin (CLA) was developed using Response Surface Methodology (RSM) based on a Central Composite Design (CCD). The method was validated using International Conference on Harmonization (ICH) guidelines with an analytical run time of 20 min. Method re-validation following a change in analytical column was successful in reducing the analytical run time to 13 min, decreasing solvent consumption thus facilitating environmental and financial sustainability. The applicability of using the United States Pharmacopeia (USP) method scaling approach in place of method re-validation using a column with a different L–designation to the original analytical column, was investigated. The scaled method met all USP system suitability requirements for resolution, tailing factor and % relative standard deviation (RSD). The re-validated and scaled method was successfully used to resolve CLA from manufacturing excipients in commercially available dosage forms. Although USP method scaling is only permitted for columns within the same L-designation, these data suggest that it may also be applicable to columns of different designation.
- Full Text:
- Date Issued: 2019
The use of experimental design in the development of an HPLC–ECD method for the analysis of captopril
- Khamanga, Sandile M, Walker, Roderick B
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184056 , vital:44163 , xlink:href="https://doi.org/10.1016/j.talanta.2010.11.025"
- Description: An accurate, sensitive and specific high performance liquid chromatography–electrochemical detection (HPLC–ECD) method that was developed and validated for captopril (CPT) is presented. Separation was achieved using a Phenomenex® Luna 5 μm (C18) column and a mobile phase comprised of phosphate buffer (adjusted to pH 3.0): acetonitrile in a ratio of 70:30 (v/v). Detection was accomplished using a full scan multi channel ESA Coulometric detector in the “oxidative-screen” mode with the upstream electrode (E1) set at +600 mV and the downstream (analytical) electrode (E2) set at +950 mV, while the potential of the guard cell was maintained at +1050 mV. The detector gain was set at 300. Experimental design using central composite design (CCD) was used to facilitate method development. Mobile phase pH, molarity and concentration of acetonitrile (ACN) were considered the critical factors to be studied to establish the retention time of CPT and cyclizine (CYC) that was used as the internal standard. Twenty experiments including centre points were undertaken and a quadratic model was derived for the retention time for CPT using the experimental data. The method was validated for linearity, accuracy, precision, limits of quantitation and detection, as per the ICH guidelines. The system was found to produce sharp and well-resolved peaks for CPT and CYC with retention times of 3.08 and 7.56 min, respectively. Linear regression analysis for the calibration curve showed a good linear relationship with a regression coefficient of 0.978 in the concentration range of 2–70 μg/mL. The linear regression equation was y = 0.0131x + 0.0275. The limits of detection (LOQ) and quantitation (LOD) were found to be 2.27 and 0.6 μg/mL, respectively. The method was used to analyze CPT in tablets. The wide range for linearity, accuracy, sensitivity, short retention time and composition of the mobile phase indicated that this method is better for the quantification of CPT than the pharmacopoeial methods.
- Full Text:
- Date Issued: 2011
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184056 , vital:44163 , xlink:href="https://doi.org/10.1016/j.talanta.2010.11.025"
- Description: An accurate, sensitive and specific high performance liquid chromatography–electrochemical detection (HPLC–ECD) method that was developed and validated for captopril (CPT) is presented. Separation was achieved using a Phenomenex® Luna 5 μm (C18) column and a mobile phase comprised of phosphate buffer (adjusted to pH 3.0): acetonitrile in a ratio of 70:30 (v/v). Detection was accomplished using a full scan multi channel ESA Coulometric detector in the “oxidative-screen” mode with the upstream electrode (E1) set at +600 mV and the downstream (analytical) electrode (E2) set at +950 mV, while the potential of the guard cell was maintained at +1050 mV. The detector gain was set at 300. Experimental design using central composite design (CCD) was used to facilitate method development. Mobile phase pH, molarity and concentration of acetonitrile (ACN) were considered the critical factors to be studied to establish the retention time of CPT and cyclizine (CYC) that was used as the internal standard. Twenty experiments including centre points were undertaken and a quadratic model was derived for the retention time for CPT using the experimental data. The method was validated for linearity, accuracy, precision, limits of quantitation and detection, as per the ICH guidelines. The system was found to produce sharp and well-resolved peaks for CPT and CYC with retention times of 3.08 and 7.56 min, respectively. Linear regression analysis for the calibration curve showed a good linear relationship with a regression coefficient of 0.978 in the concentration range of 2–70 μg/mL. The linear regression equation was y = 0.0131x + 0.0275. The limits of detection (LOQ) and quantitation (LOD) were found to be 2.27 and 0.6 μg/mL, respectively. The method was used to analyze CPT in tablets. The wide range for linearity, accuracy, sensitivity, short retention time and composition of the mobile phase indicated that this method is better for the quantification of CPT than the pharmacopoeial methods.
- Full Text:
- Date Issued: 2011
Quantitation of zolpidem in biological fluids by electro-driven microextraction combined with HPLC-UV analysis
- Yaripour, Saeid, Mohammadi, Ali, Esfanjani, Isa, Walker, Roderick B, Nojavan, Saeed
- Authors: Yaripour, Saeid , Mohammadi, Ali , Esfanjani, Isa , Walker, Roderick B , Nojavan, Saeed
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184723 , vital:44266 , xlink:href="http://dx.doi.org/10.17179/excli2018-1140"
- Description: In this study, for the first time, an electro-driven microextraction method named electromembrane extraction combined with a simple high performance liquid chromatography and ultraviolet detection was developed and validated for the quantitation of zolpidem in biological samples. Parameters influencing electromembrane extraction were evaluated and optimized. The membrane consisted of 2-ethylhexanol immobilized in the pores of a hollow fiber. As a driving force, a 150 V electric field was applied to facilitate the analyte migration from the sample matrix to an acceptor solution through a supported liquid membrane. The pHs of donor and acceptor solutions were optimized to 6.0 and 2.0, respectively. The enrichment factor was obtained >75 within 15 minutes. The effect of carbon nanotubes (as solid nano-sorbents) on the membrane performance and EME efficiency was evaluated. The method was linear over the range of 10-1000 ng/mL for zolpidem (R2 >0.9991) with repeatability (%RSD) between 0.3 % and 7.3 % (n = 3). The limits of detection and quantitation were 3 and 10 ng/mL, respectively. The sensitivity of HPLC-UV for the determination of zolpidem was enhanced by electromembrane extraction. Finally, the method was employed for the quantitation of zolpidem in biological samples with relative recoveries in the range of 60-79 %.
- Full Text:
- Date Issued: 2018
- Authors: Yaripour, Saeid , Mohammadi, Ali , Esfanjani, Isa , Walker, Roderick B , Nojavan, Saeed
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184723 , vital:44266 , xlink:href="http://dx.doi.org/10.17179/excli2018-1140"
- Description: In this study, for the first time, an electro-driven microextraction method named electromembrane extraction combined with a simple high performance liquid chromatography and ultraviolet detection was developed and validated for the quantitation of zolpidem in biological samples. Parameters influencing electromembrane extraction were evaluated and optimized. The membrane consisted of 2-ethylhexanol immobilized in the pores of a hollow fiber. As a driving force, a 150 V electric field was applied to facilitate the analyte migration from the sample matrix to an acceptor solution through a supported liquid membrane. The pHs of donor and acceptor solutions were optimized to 6.0 and 2.0, respectively. The enrichment factor was obtained >75 within 15 minutes. The effect of carbon nanotubes (as solid nano-sorbents) on the membrane performance and EME efficiency was evaluated. The method was linear over the range of 10-1000 ng/mL for zolpidem (R2 >0.9991) with repeatability (%RSD) between 0.3 % and 7.3 % (n = 3). The limits of detection and quantitation were 3 and 10 ng/mL, respectively. The sensitivity of HPLC-UV for the determination of zolpidem was enhanced by electromembrane extraction. Finally, the method was employed for the quantitation of zolpidem in biological samples with relative recoveries in the range of 60-79 %.
- Full Text:
- Date Issued: 2018
Bioequivalence assessment of generic products an innovative South African approach
- Walker, Roderick B, Kanfer, Isadore, Skinner, Michael F
- Authors: Walker, Roderick B , Kanfer, Isadore , Skinner, Michael F
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184256 , vital:44194 , xlink:href="https://doi.org/10.1080/10601330500534014"
- Description: Concurrent with the implementation of new legislation mandating Generic Substitution in South Africa, a new set of guidelines for bioavailability and bioequivalence have been published. Since one of the main objectives of the new legislation in South Africa relating to Generic Substitution is to ensure that medicines of high quality, safety, and efficacy are made more accessible and more affordable to the wider public, the need to speed up approval of such multi-source products has become a regulatory priority. In order to facilitate this process, various bioequivalence issues have been addressed including important issues such as the acceptance criteria and associated bioequivalence intervals, use of a foreign reference product and the issue of assessing highly variable drugs (HVDs). In addition, dispensations have been made with respect to food effect assessment and variability relating to genetic polymorphism in drug metabolism (genotyping/phenotyping). Furthermore, the use of “old” biostudies submitted in support of an application is subject to expiry date. Acceptance of appropriate data requires that specific criteria such as Cmax and AUC, in addition to the usual considerations, also meet the limits specified by the particular registration authority of the country where such products are intended to be marketed. Generally, these limits require that the 90% confidence interval (CI) for AUC and Cmax test/reference ratios lies within the acceptance interval of 0.80–1.25 calculated using log-transformed data. While such acceptance criteria are, in general, ubiquitous, some differences in acceptance criteria do exist between various countries. The new guidelines for bioavailability/bioequivalence studies developed by the South African regulatory authority, the Medicines Control Council (MCC), makes provision for highly variable drugs and the use of a non-South African reference product. The MCC requires that the acceptance criterion for Cmax ratios be set at 0.75–1.33 while maintaining AUC ratios at 0.80–1.25 using a 90% CI. Furthermore, provision is made to apply scaling based on average bioequivalence assessment and, as an interim measure, consideration has also been given to the use of a foreign reference product provided that equivalence between that product and the innovator product currently available on the South African market can be shown using in vitro testing.
- Full Text:
- Date Issued: 2006
- Authors: Walker, Roderick B , Kanfer, Isadore , Skinner, Michael F
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184256 , vital:44194 , xlink:href="https://doi.org/10.1080/10601330500534014"
- Description: Concurrent with the implementation of new legislation mandating Generic Substitution in South Africa, a new set of guidelines for bioavailability and bioequivalence have been published. Since one of the main objectives of the new legislation in South Africa relating to Generic Substitution is to ensure that medicines of high quality, safety, and efficacy are made more accessible and more affordable to the wider public, the need to speed up approval of such multi-source products has become a regulatory priority. In order to facilitate this process, various bioequivalence issues have been addressed including important issues such as the acceptance criteria and associated bioequivalence intervals, use of a foreign reference product and the issue of assessing highly variable drugs (HVDs). In addition, dispensations have been made with respect to food effect assessment and variability relating to genetic polymorphism in drug metabolism (genotyping/phenotyping). Furthermore, the use of “old” biostudies submitted in support of an application is subject to expiry date. Acceptance of appropriate data requires that specific criteria such as Cmax and AUC, in addition to the usual considerations, also meet the limits specified by the particular registration authority of the country where such products are intended to be marketed. Generally, these limits require that the 90% confidence interval (CI) for AUC and Cmax test/reference ratios lies within the acceptance interval of 0.80–1.25 calculated using log-transformed data. While such acceptance criteria are, in general, ubiquitous, some differences in acceptance criteria do exist between various countries. The new guidelines for bioavailability/bioequivalence studies developed by the South African regulatory authority, the Medicines Control Council (MCC), makes provision for highly variable drugs and the use of a non-South African reference product. The MCC requires that the acceptance criterion for Cmax ratios be set at 0.75–1.33 while maintaining AUC ratios at 0.80–1.25 using a 90% CI. Furthermore, provision is made to apply scaling based on average bioequivalence assessment and, as an interim measure, consideration has also been given to the use of a foreign reference product provided that equivalence between that product and the innovator product currently available on the South African market can be shown using in vitro testing.
- Full Text:
- Date Issued: 2006
Role of percutaneous penetration enhancers
- Walker, Roderick B, Smith, Eric W
- Authors: Walker, Roderick B , Smith, Eric W
- Date: 1996
- Language: English
- Type: text , Article
- Identifier: vital:6446 , http://hdl.handle.net/10962/d1006633
- Description: It is clear that scientists are now only beginning to comprehend the complexity of transdermal drug delivery. Elucidation of the biochemical composition and functioning of the intrinsic diffusional barrier of the stratum corneum has prompted investigation of chemical and physical means of enhancing the percutaneous penetration of poorly absorbed drugs. Chemical enhancers that aid absorption of co-administered moieties are currently believed to improve solubility within the stratum corneum or increase lipid fluidity of the intracellular bilayers. Alternatively,the use of ionto- or phonophoresis may facilitate the absorption of some drug molecules by physical alteration of the barrier. The role of penetration enhancer inclusion in topical formulations has been well documented and will undoubtedly, in the future, permit the delivery of broader classes of drugs through the stratum corneum.
- Full Text:
- Date Issued: 1996
- Authors: Walker, Roderick B , Smith, Eric W
- Date: 1996
- Language: English
- Type: text , Article
- Identifier: vital:6446 , http://hdl.handle.net/10962/d1006633
- Description: It is clear that scientists are now only beginning to comprehend the complexity of transdermal drug delivery. Elucidation of the biochemical composition and functioning of the intrinsic diffusional barrier of the stratum corneum has prompted investigation of chemical and physical means of enhancing the percutaneous penetration of poorly absorbed drugs. Chemical enhancers that aid absorption of co-administered moieties are currently believed to improve solubility within the stratum corneum or increase lipid fluidity of the intracellular bilayers. Alternatively,the use of ionto- or phonophoresis may facilitate the absorption of some drug molecules by physical alteration of the barrier. The role of penetration enhancer inclusion in topical formulations has been well documented and will undoubtedly, in the future, permit the delivery of broader classes of drugs through the stratum corneum.
- Full Text:
- Date Issued: 1996
Application of the Minolta chromameter to the assessment of corticosteroid-induced skin blanching
- Walker, Roderick B, Haigh, John M, Smith, Eric W
- Authors: Walker, Roderick B , Haigh, John M , Smith, Eric W
- Date: 2000
- Language: English
- Type: Book chapter , text
- Identifier: vital:6451 , http://hdl.handle.net/10962/d1006639
- Full Text:
- Date Issued: 2000
- Authors: Walker, Roderick B , Haigh, John M , Smith, Eric W
- Date: 2000
- Language: English
- Type: Book chapter , text
- Identifier: vital:6451 , http://hdl.handle.net/10962/d1006639
- Full Text:
- Date Issued: 2000
In vitro dissolution kinetics of Captopril from microspheres manufactured by solvent evaporation
- Khamanga, Sandile M, Walker, Roderick B
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6390 , http://hdl.handle.net/10962/d1006311
- Description: The aim of this study was to develop and assess captopril-loaded microspheres in which Methocel and Eudragit RS were used as release-controlling factors and to evaluate captopril (CPT) release using kinetic models. Drug-excipient interactions were evaluated using infrared studies, and the physical appearance was characterized using scanning electron microscopy (SEM). A burst effect was observed during the first stage of dissolution for most batches of microspheres. SEM results reveal that this may be attributed to dissolution of captopril crystals that were present on the surface, embedded in the superficial layer of the matrix materials, trapped near the surface of the microspheres, or that may have diffused rapidly through the porous surface of the capsules. The release data generated during in vitro release studies were fitted to zero-order, first-order, Higuchi, Korsmeyer–Peppas, Kopcha, and Makoid–Banakar models. The release kinetics of captopril from most formulations followed a classical Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores located in the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed a predominance of diffusion relative to swelling or erosion throughout the entire test period. The drug release mechanism was also confirmed by the Makoid–Banakar and Korsmeyer–Peppas model exponents. This further supports a diffusion–release mechanism for most formulations. The models postulate that the total drug released is a summation of several mechanisms (viz., burst release, relaxation-induced controlled release, and diffusional release). These results also support the potential application of Eudragit/Methocel microspheres as a suitable sustained-release drug delivery system for captopril.
- Full Text:
- Date Issued: 2012
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6390 , http://hdl.handle.net/10962/d1006311
- Description: The aim of this study was to develop and assess captopril-loaded microspheres in which Methocel and Eudragit RS were used as release-controlling factors and to evaluate captopril (CPT) release using kinetic models. Drug-excipient interactions were evaluated using infrared studies, and the physical appearance was characterized using scanning electron microscopy (SEM). A burst effect was observed during the first stage of dissolution for most batches of microspheres. SEM results reveal that this may be attributed to dissolution of captopril crystals that were present on the surface, embedded in the superficial layer of the matrix materials, trapped near the surface of the microspheres, or that may have diffused rapidly through the porous surface of the capsules. The release data generated during in vitro release studies were fitted to zero-order, first-order, Higuchi, Korsmeyer–Peppas, Kopcha, and Makoid–Banakar models. The release kinetics of captopril from most formulations followed a classical Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores located in the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed a predominance of diffusion relative to swelling or erosion throughout the entire test period. The drug release mechanism was also confirmed by the Makoid–Banakar and Korsmeyer–Peppas model exponents. This further supports a diffusion–release mechanism for most formulations. The models postulate that the total drug released is a summation of several mechanisms (viz., burst release, relaxation-induced controlled release, and diffusional release). These results also support the potential application of Eudragit/Methocel microspheres as a suitable sustained-release drug delivery system for captopril.
- Full Text:
- Date Issued: 2012
The identification of the UV degradants of melatonin and their ability to scavenge free radicals
- Maharaj, Deepa S, Anoopkumar-Dukie, Shailendra, Glass, Beverley D, Antunes, Edith M, Lack, Barbara A, Walker, Roderick B, Daya, Santylal
- Authors: Maharaj, Deepa S , Anoopkumar-Dukie, Shailendra , Glass, Beverley D , Antunes, Edith M , Lack, Barbara A , Walker, Roderick B , Daya, Santylal
- Date: 2002
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184303 , vital:44198 , xlink:href="https://doi.org/10.1034/j.1600-079X.2002.01866.x"
- Description: Ultraviolet (UV) light is known to induce the generation of free radicals in biological tissues such as skin. Of these free radicals, the O2–· and particularly the ·OH radical can induce cellular damage including lipid peroxidation. Thus, the use of antioxidants to prevent such damage induced by UV irradiation has received much attention recently. One such antioxidant, which has the potential to be incorporated into sunscreens, is the pineal secretory product melatonin. One of the concerns of using melatonin in sunscreens is its photostability. In the present study, we investigated the photostability of melatonin subjected to UV irradiation. In addition, we used liquid chromatography mass spectrometry (LC-MS) to identify the degradants and we also assessed the ability of the degradants to inhibit O2–· generation as well as lipid peroxidation in rat brain homogenate. The results show that UV irradiation of melatonin (0.1 mg/mL) using a 400-W lamp for 2 hr caused a significant decline of melatonin to 18% of its original concentration after 20 min, with the decline continuing until the melatonin concentration reaches zero at 120 min. The LC-MS results show that the degradants of melatonin are 6-hydroxymelatonin and N1-acetyl-N2-formyl-5-methoxykynurenamine (AFMK). These degradants were able to provide equipotent activity against potassium cyanide (KCN)-induced superoxide generation compared to non-irradiated melatonin. Thus, the study shows that although melatonin is rapidly degraded by UV irradiation, the degradants retain antioxidant activity, making melatonin a likely candidate for inclusion in sunscreens.
- Full Text:
- Date Issued: 2002
- Authors: Maharaj, Deepa S , Anoopkumar-Dukie, Shailendra , Glass, Beverley D , Antunes, Edith M , Lack, Barbara A , Walker, Roderick B , Daya, Santylal
- Date: 2002
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184303 , vital:44198 , xlink:href="https://doi.org/10.1034/j.1600-079X.2002.01866.x"
- Description: Ultraviolet (UV) light is known to induce the generation of free radicals in biological tissues such as skin. Of these free radicals, the O2–· and particularly the ·OH radical can induce cellular damage including lipid peroxidation. Thus, the use of antioxidants to prevent such damage induced by UV irradiation has received much attention recently. One such antioxidant, which has the potential to be incorporated into sunscreens, is the pineal secretory product melatonin. One of the concerns of using melatonin in sunscreens is its photostability. In the present study, we investigated the photostability of melatonin subjected to UV irradiation. In addition, we used liquid chromatography mass spectrometry (LC-MS) to identify the degradants and we also assessed the ability of the degradants to inhibit O2–· generation as well as lipid peroxidation in rat brain homogenate. The results show that UV irradiation of melatonin (0.1 mg/mL) using a 400-W lamp for 2 hr caused a significant decline of melatonin to 18% of its original concentration after 20 min, with the decline continuing until the melatonin concentration reaches zero at 120 min. The LC-MS results show that the degradants of melatonin are 6-hydroxymelatonin and N1-acetyl-N2-formyl-5-methoxykynurenamine (AFMK). These degradants were able to provide equipotent activity against potassium cyanide (KCN)-induced superoxide generation compared to non-irradiated melatonin. Thus, the study shows that although melatonin is rapidly degraded by UV irradiation, the degradants retain antioxidant activity, making melatonin a likely candidate for inclusion in sunscreens.
- Full Text:
- Date Issued: 2002
Quality by Design Optimization of Cold Sonochemical Synthesis of Zidovudine-Lamivudine Nanosuspensions:
- Witika, Bwalya A, Smith, Vincent J, Walker, Roderick B
- Authors: Witika, Bwalya A , Smith, Vincent J , Walker, Roderick B
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/148424 , vital:38738 , https://doi.org/10.3390/pharmaceutics12040367
- Description: Lamivudine (3TC) and zidovudine (AZT) are antiviral agents used to manage HIV/AIDS infection. The compounds require frequent dosing, exhibit unpredictable bioavailability and a side effect profile that includes hepato- and haema-toxicity. A novel pseudo one-solvent bottom-up approach and Design of Experiments using sodium dodecyl sulphate (SDS) and α-tocopheryl polyethylene glycol succinate 1000 (TPGS 1000) to electrosterically stablize the nano co-crystals was used to develop, produce and optimize 3TC and AZT nano co-crystals. Equimolar solutions of 3TC in surfactant dissolved in de-ionised water and AZT in methanol were rapidly injected into a vessel and sonicated at 4 °C.
- Full Text:
- Date Issued: 2020
- Authors: Witika, Bwalya A , Smith, Vincent J , Walker, Roderick B
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/148424 , vital:38738 , https://doi.org/10.3390/pharmaceutics12040367
- Description: Lamivudine (3TC) and zidovudine (AZT) are antiviral agents used to manage HIV/AIDS infection. The compounds require frequent dosing, exhibit unpredictable bioavailability and a side effect profile that includes hepato- and haema-toxicity. A novel pseudo one-solvent bottom-up approach and Design of Experiments using sodium dodecyl sulphate (SDS) and α-tocopheryl polyethylene glycol succinate 1000 (TPGS 1000) to electrosterically stablize the nano co-crystals was used to develop, produce and optimize 3TC and AZT nano co-crystals. Equimolar solutions of 3TC in surfactant dissolved in de-ionised water and AZT in methanol were rapidly injected into a vessel and sonicated at 4 °C.
- Full Text:
- Date Issued: 2020
Muco-adhesive clarithromycin-loaded nanostructured lipid carriers for ocular delivery: Formulation, characterization, cytotoxicity and stability
- Makoni, Pedzisai A, Khamanga, Sandile M, Walker, Roderick B
- Authors: Makoni, Pedzisai A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183150 , vital:43916 , xlink:href="https://doi.org/10.1016/j.jddst.2020.102171"
- Description: Topical ophthalmic formulations are the preferred approach to treat the anterior segment of the eye as it is a non-invasive therapeutic approach. The ocular bioavailability of drugs is generally limited, due to the presence of impervious anatomical barriers and low residence time and contact with the target tissue. Optimization of clarithromycin-loaded nanostructured lipid carriers using Design of Experiments was undertaken. Manufacture of nanostructured lipid carriers was achieved using hot emulsification ultrasonication. Formulation and process parameters were successfully identified following screening and subsequently optimized using Tween® 20, as a stabilizer. Muco-adhesive properties that could potentially increase ocular residence time, in vitro clarithromycin release and cytotoxicity against HeLa cells were evaluated. Short term stability studies of the optimized lipidic formulations was assessed at 4 °C and 22 °C. The optimized formulation exhibited muco-adhesive properties under stationary conditions assessed using Laser Doppler Anemometry, sustained release of API over 24 h under in vitro conditions. In vitro cytotoxicity studies revealed that the NLC were less cytotoxic to HeLa cells in comparison to pure API. The results suggest that the optimized carriers may have the potential to enhance precorneal retention, increase ocular availability and permit dose reduction or permit use of a longer dosing frequency.
- Full Text:
- Date Issued: 2021
- Authors: Makoni, Pedzisai A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183150 , vital:43916 , xlink:href="https://doi.org/10.1016/j.jddst.2020.102171"
- Description: Topical ophthalmic formulations are the preferred approach to treat the anterior segment of the eye as it is a non-invasive therapeutic approach. The ocular bioavailability of drugs is generally limited, due to the presence of impervious anatomical barriers and low residence time and contact with the target tissue. Optimization of clarithromycin-loaded nanostructured lipid carriers using Design of Experiments was undertaken. Manufacture of nanostructured lipid carriers was achieved using hot emulsification ultrasonication. Formulation and process parameters were successfully identified following screening and subsequently optimized using Tween® 20, as a stabilizer. Muco-adhesive properties that could potentially increase ocular residence time, in vitro clarithromycin release and cytotoxicity against HeLa cells were evaluated. Short term stability studies of the optimized lipidic formulations was assessed at 4 °C and 22 °C. The optimized formulation exhibited muco-adhesive properties under stationary conditions assessed using Laser Doppler Anemometry, sustained release of API over 24 h under in vitro conditions. In vitro cytotoxicity studies revealed that the NLC were less cytotoxic to HeLa cells in comparison to pure API. The results suggest that the optimized carriers may have the potential to enhance precorneal retention, increase ocular availability and permit dose reduction or permit use of a longer dosing frequency.
- Full Text:
- Date Issued: 2021
Design, Optimization, Manufacture and Characterization of Efavirenz-Loaded Flaxseed Oil Nanoemulsions
- Mazonde, Priveledge, Khamanga, Sandile M, Walker, Roderick B
- Authors: Mazonde, Priveledge , Khamanga, Sandile M , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183183 , vital:43919 , xlink:href="https://doi.org/10.3390/pharmaceutics12090797"
- Description: The formation, manufacture and characterization of low energy water-in-oil (w/o) nanoemulsions prepared using cold pressed flaxseed oil containing efavirenz was investigated. Pseudo-ternary phase diagrams were constructed to identify the nanoemulsion region(s). Other potential lipid-based drug delivery phases containing flaxseed oil with 1:1 m/m surfactant mixture of Tween® 80, Span® 20 and different amounts of ethanol were tested to characterize the impact of surfactant mixture on emulsion formation. Flaxseed oil was used as the oil phase as efavirenz exhibited high solubility in the vehicle when compared to other vegetable oils tested. Optimization of surfactant mixtures was undertaken using design of experiments, specifically a D-optimal design with the flaxseed oil content set at 10% m/m. Two solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, physical and chemical stability. Metastable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and significant isotropic gel (semisolid) and o/w emulsions were observed during phase behavior studies. Droplet sizes ranged between 156 and 225 nm, zeta potential between −24 and −41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487.
- Full Text:
- Date Issued: 2020
- Authors: Mazonde, Priveledge , Khamanga, Sandile M , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183183 , vital:43919 , xlink:href="https://doi.org/10.3390/pharmaceutics12090797"
- Description: The formation, manufacture and characterization of low energy water-in-oil (w/o) nanoemulsions prepared using cold pressed flaxseed oil containing efavirenz was investigated. Pseudo-ternary phase diagrams were constructed to identify the nanoemulsion region(s). Other potential lipid-based drug delivery phases containing flaxseed oil with 1:1 m/m surfactant mixture of Tween® 80, Span® 20 and different amounts of ethanol were tested to characterize the impact of surfactant mixture on emulsion formation. Flaxseed oil was used as the oil phase as efavirenz exhibited high solubility in the vehicle when compared to other vegetable oils tested. Optimization of surfactant mixtures was undertaken using design of experiments, specifically a D-optimal design with the flaxseed oil content set at 10% m/m. Two solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, physical and chemical stability. Metastable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and significant isotropic gel (semisolid) and o/w emulsions were observed during phase behavior studies. Droplet sizes ranged between 156 and 225 nm, zeta potential between −24 and −41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487.
- Full Text:
- Date Issued: 2020
A stability-indicating high performance liquid chromatographic assay for the determination of orlistat in capsules
- Mohammadi, Ali, Haririan, I, Rezanour, Nasrin, Ghiasi, L, Walker, Roderick B
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, Nasrin , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184267 , vital:44195 , xlink:href="https://doi.org/10.1016/j.chroma.2006.03.038"
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 μm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, Nasrin , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184267 , vital:44195 , xlink:href="https://doi.org/10.1016/j.chroma.2006.03.038"
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 μm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
Encapsulation and physicochemical evaluation of efavirenz in liposomes
- Okafor, Nnamdi Ikemefuna, Nkanga, Christian I, Walker, Roderick B, Noundou, Xavier S, Krause, Rui W M
- Authors: Okafor, Nnamdi Ikemefuna , Nkanga, Christian I , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183414 , vital:43988 , xlink:href="https://doi.org/10.1007/s40005-019-00458-8"
- Description: Antiretroviral therapy remains the most efective means of managing the human immune defciency virus/acquired immune defciency syndrome (HIV/AIDS). Application of therapeutics has been hampered by factors including poor bioavailability of most anti-retroviral compounds (ARV), side efects and an alarming emergence of drug resistant strains of the virus. Recent developments and use of drug delivery systems (DDS) has shown potential for improving the pharmacological profle of ARV. Amongst these complex DDS, liposomes have been explored for delivery of ARV. In this study, we have aimed at exploring efcient encapsulation of efavirenz (EFV), a potent ARV using diferent mass ratios of crude soybean lecithin and cholesterol. The EFV-loaded liposomes (EFL) were prepared using thin flm hydration and evaluated for particle size, zeta potential (ZP), encapsulation efciency (EE%), morphology and drug release studies. Diferential scanning calorimetry (DSC), X-ray difraction (XRD), energy dispersity spectroscopy (EDS) and Fourier transform infrared (FTIR) spectroscopy were used for comprehensive physicochemical characterization of EFL. EFL exhibited high encapsulation (99%) in 1:1 crude lecithin to cholesterol mass ratio. The average particle size and Zeta Potential of EFL were found to be 411.10±7.40 nm and −53.5.3±0.06 mV, respectively. EFL showed a relatively controlled EFV release behaviour that was similar to the dissolution profle of un-encapsulated EFV. This suggests that EFL represents a promising vehicle for efective EFV delivery while providing the advantages of a nano-scaled delivery system
- Full Text:
- Date Issued: 2020
- Authors: Okafor, Nnamdi Ikemefuna , Nkanga, Christian I , Walker, Roderick B , Noundou, Xavier S , Krause, Rui W M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183414 , vital:43988 , xlink:href="https://doi.org/10.1007/s40005-019-00458-8"
- Description: Antiretroviral therapy remains the most efective means of managing the human immune defciency virus/acquired immune defciency syndrome (HIV/AIDS). Application of therapeutics has been hampered by factors including poor bioavailability of most anti-retroviral compounds (ARV), side efects and an alarming emergence of drug resistant strains of the virus. Recent developments and use of drug delivery systems (DDS) has shown potential for improving the pharmacological profle of ARV. Amongst these complex DDS, liposomes have been explored for delivery of ARV. In this study, we have aimed at exploring efcient encapsulation of efavirenz (EFV), a potent ARV using diferent mass ratios of crude soybean lecithin and cholesterol. The EFV-loaded liposomes (EFL) were prepared using thin flm hydration and evaluated for particle size, zeta potential (ZP), encapsulation efciency (EE%), morphology and drug release studies. Diferential scanning calorimetry (DSC), X-ray difraction (XRD), energy dispersity spectroscopy (EDS) and Fourier transform infrared (FTIR) spectroscopy were used for comprehensive physicochemical characterization of EFL. EFL exhibited high encapsulation (99%) in 1:1 crude lecithin to cholesterol mass ratio. The average particle size and Zeta Potential of EFL were found to be 411.10±7.40 nm and −53.5.3±0.06 mV, respectively. EFL showed a relatively controlled EFV release behaviour that was similar to the dissolution profle of un-encapsulated EFV. This suggests that EFL represents a promising vehicle for efective EFV delivery while providing the advantages of a nano-scaled delivery system
- Full Text:
- Date Issued: 2020
Electropolymerized Fluorinated Aniline-Based Fiber for Headspace Solid-Phase Microextraction and Gas Chromatographic Determination of Benzaldehyde in Injectable Pharmaceutical Formulations
- Mohammadi, Ali, Mohammadi, Somayeh, Moghaddam, Bayandori A, Masoumi, Vahideh, Walker, Roderick B
- Authors: Mohammadi, Ali , Mohammadi, Somayeh , Moghaddam, Bayandori A , Masoumi, Vahideh , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184120 , vital:44175 , xlink:href="https://doi.org/10.1093/chromsci/bmt152"
- Description: In this study, a simple method was developed and validated to detect trace levels of benzaldehyde in injectable pharmaceutical formulations by solid-phase microextraction coupled with gas chromatography–flame ionization detector. Polyaniline was electrodeposited on a platinum wire in trifluoroacetic acid solvent by cyclic voltammetry technique. This fiber shows high thermal and mechanical stability and high performance in extraction of benzaldehyde. Extraction and desorption time and temperature, salt effect and gas chromatography parameters were optimized as key parameters. At the optimum conditions, the fiber shows good linearity between peak area ratio of benzaldehyde/3-chlorobenzaldehyde and benzaldehyde concentration in the range of 50–800 ng/mL with percent relative standard deviation values ranging from 0.75 to 8.64% (n 5 3). The limits of quantitation and detection were 50 and 16 ng/mL, respectively. The method has the requisite selectivity, sensitivity, accuracy and precision to assay benzaldehyde in injectable pharmaceutical dosage forms.
- Full Text:
- Date Issued: 2014
- Authors: Mohammadi, Ali , Mohammadi, Somayeh , Moghaddam, Bayandori A , Masoumi, Vahideh , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184120 , vital:44175 , xlink:href="https://doi.org/10.1093/chromsci/bmt152"
- Description: In this study, a simple method was developed and validated to detect trace levels of benzaldehyde in injectable pharmaceutical formulations by solid-phase microextraction coupled with gas chromatography–flame ionization detector. Polyaniline was electrodeposited on a platinum wire in trifluoroacetic acid solvent by cyclic voltammetry technique. This fiber shows high thermal and mechanical stability and high performance in extraction of benzaldehyde. Extraction and desorption time and temperature, salt effect and gas chromatography parameters were optimized as key parameters. At the optimum conditions, the fiber shows good linearity between peak area ratio of benzaldehyde/3-chlorobenzaldehyde and benzaldehyde concentration in the range of 50–800 ng/mL with percent relative standard deviation values ranging from 0.75 to 8.64% (n 5 3). The limits of quantitation and detection were 50 and 16 ng/mL, respectively. The method has the requisite selectivity, sensitivity, accuracy and precision to assay benzaldehyde in injectable pharmaceutical dosage forms.
- Full Text:
- Date Issued: 2014
Development, manufacture and characterization of niosomes for the delivery for nevirapine
- Witika, Bwalya A, Walker, Roderick B
- Authors: Witika, Bwalya A , Walker, Roderick B
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183514 , vital:44002 , xlink:href="https://doi.org/10.1691/ph.2019.8168"
- Description: Nevirapine (NVP), used for the treatment of HIV/AIDS, exhibits unpredictable oral bioavailability, has a poor side effect profile and requires frequent dosing. Niosomes are novel drug delivery systems that have the potential to overcome these challenges. A thin layer hydration approach was used to produce niosomes and optimisation was undertaken using design of experiments (DoE) and response surface methodology (RSM) establish and identify parameters that may affect the manufacture of niosomes. The impact of cholesterol and surfactant content, hydration time and temperature on manufacture was investigated. Critical quality attributes (CQA) in respect of particle size (PS), entrapment efficiency (EE), polydispersity index (PDI) and the amount of NVP released at 48 hours was also assessed. The optimised niosome composition was identified and manufactured and the CQA characterised prior to placing the batch on stability for 12 weeks at 4±2 °C and 22±2 °C. The PS, PDI, EE and % NVP released at 48 h was 523.36±23.16 nm, 0.386±0.054, 96.8 % and 25.3 % for niosomes manufactured with Span® 20. Similarly, the parameters were 502.87±21.77 nm and 0.394±0.027, 98.0 % and 25.0 % for mean PS, PDI, EE and %NVP released at 48 h for Span® 80 niosomes. All characterisation was undertaken on the day of manufacture. In conclusion, a simple, cheap, rapid and precise method of manufacture of NVP niosomes was developed, validated and optimised using DoE and RSM and the product exhibited the target CQA.
- Full Text:
- Date Issued: 2019
- Authors: Witika, Bwalya A , Walker, Roderick B
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183514 , vital:44002 , xlink:href="https://doi.org/10.1691/ph.2019.8168"
- Description: Nevirapine (NVP), used for the treatment of HIV/AIDS, exhibits unpredictable oral bioavailability, has a poor side effect profile and requires frequent dosing. Niosomes are novel drug delivery systems that have the potential to overcome these challenges. A thin layer hydration approach was used to produce niosomes and optimisation was undertaken using design of experiments (DoE) and response surface methodology (RSM) establish and identify parameters that may affect the manufacture of niosomes. The impact of cholesterol and surfactant content, hydration time and temperature on manufacture was investigated. Critical quality attributes (CQA) in respect of particle size (PS), entrapment efficiency (EE), polydispersity index (PDI) and the amount of NVP released at 48 hours was also assessed. The optimised niosome composition was identified and manufactured and the CQA characterised prior to placing the batch on stability for 12 weeks at 4±2 °C and 22±2 °C. The PS, PDI, EE and % NVP released at 48 h was 523.36±23.16 nm, 0.386±0.054, 96.8 % and 25.3 % for niosomes manufactured with Span® 20. Similarly, the parameters were 502.87±21.77 nm and 0.394±0.027, 98.0 % and 25.0 % for mean PS, PDI, EE and %NVP released at 48 h for Span® 80 niosomes. All characterisation was undertaken on the day of manufacture. In conclusion, a simple, cheap, rapid and precise method of manufacture of NVP niosomes was developed, validated and optimised using DoE and RSM and the product exhibited the target CQA.
- Full Text:
- Date Issued: 2019
Nano-biomimetic drug delivery vehicles: Potential approaches for COVID-19 treatment
- Witika, Bwalya A, Makoni, Pedzisai A, Mweetwa, Larry L, Ntemi, Pascal V, Chikukwa, Mellisa T R, Matafwali, Scott K, Mwila, Chiluba, Mudenda, Steward, Katandula, Jonathan, Walker, Roderick B
- Authors: Witika, Bwalya A , Makoni, Pedzisai A , Mweetwa, Larry L , Ntemi, Pascal V , Chikukwa, Mellisa T R , Matafwali, Scott K , Mwila, Chiluba , Mudenda, Steward , Katandula, Jonathan , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183440 , vital:43991 , xlink:href="https://doi.org/10.3390/molecules25245952"
- Description: The current COVID-19 pandemic has tested the resolve of the global community with more than 35 million infections worldwide and numbers increasing with no cure or vaccine available to date. Nanomedicines have an advantage of providing enhanced permeability and retention and have been extensively studied as targeted drug delivery strategies for the treatment of different disease. The role of monocytes, erythrocytes, thrombocytes, and macrophages in diseases, including infectious and inflammatory diseases, cancer, and atherosclerosis, are better understood and have resulted in improved strategies for targeting and in some instances mimicking these cell types to improve therapeutic outcomes. Consequently, these primary cell types can be exploited for the purposes of serving as a "Trojan horse" for targeted delivery to identified organs and sites of inflammation. State of the art and potential utilization of nanocarriers such as nanospheres/nanocapsules, nanocrystals, liposomes, solid lipid nanoparticles/nano-structured lipid carriers, dendrimers, and nanosponges for biomimicry and/or targeted delivery of bioactives to cells are reported herein and their potential use in the treatment of COVID-19 infections discussed. Physicochemical properties, viz., hydrophilicity, particle shape, surface charge, composition, concentration, the use of different target-specific ligands on the surface of carriers, and the impact on carrier efficacy and specificity are also discussed.
- Full Text:
- Date Issued: 2020
- Authors: Witika, Bwalya A , Makoni, Pedzisai A , Mweetwa, Larry L , Ntemi, Pascal V , Chikukwa, Mellisa T R , Matafwali, Scott K , Mwila, Chiluba , Mudenda, Steward , Katandula, Jonathan , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183440 , vital:43991 , xlink:href="https://doi.org/10.3390/molecules25245952"
- Description: The current COVID-19 pandemic has tested the resolve of the global community with more than 35 million infections worldwide and numbers increasing with no cure or vaccine available to date. Nanomedicines have an advantage of providing enhanced permeability and retention and have been extensively studied as targeted drug delivery strategies for the treatment of different disease. The role of monocytes, erythrocytes, thrombocytes, and macrophages in diseases, including infectious and inflammatory diseases, cancer, and atherosclerosis, are better understood and have resulted in improved strategies for targeting and in some instances mimicking these cell types to improve therapeutic outcomes. Consequently, these primary cell types can be exploited for the purposes of serving as a "Trojan horse" for targeted delivery to identified organs and sites of inflammation. State of the art and potential utilization of nanocarriers such as nanospheres/nanocapsules, nanocrystals, liposomes, solid lipid nanoparticles/nano-structured lipid carriers, dendrimers, and nanosponges for biomimicry and/or targeted delivery of bioactives to cells are reported herein and their potential use in the treatment of COVID-19 infections discussed. Physicochemical properties, viz., hydrophilicity, particle shape, surface charge, composition, concentration, the use of different target-specific ligands on the surface of carriers, and the impact on carrier efficacy and specificity are also discussed.
- Full Text:
- Date Issued: 2020
Enhancement of Biological and Pharmacological Properties of an Encapsulated Polyphenol: Curcumin
- Witika, Bwalya A, Makoni, Pedzisai A, Matafwali, Scott K, Mweetwa, Larry L, Shandele, Ginnethon C, Walker, Roderick B
- Authors: Witika, Bwalya A , Makoni, Pedzisai A , Matafwali, Scott K , Mweetwa, Larry L , Shandele, Ginnethon C , Walker, Roderick B
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183161 , vital:43917 , xlink:href="https://doi.org/10.3390/molecules26144244"
- Description: There is a dearth of natural remedies available for the treatment of an increasing number of diseases facing mankind. Natural products may provide an opportunity to produce formulations and therapeutic solutions to address this shortage. Curcumin (CUR), diferuloylmethane; I,7-bis-(4-hydroxy-3-methoxyphenyl)-1,6-heptadiene-3,5-dione is the major pigment in turmeric powder which has been reported to exhibit a number of health benefits including, antibacterial, antiviral, anti-cancer, anti-inflammatory and anti-oxidant properties. In this review, the authors attempt to highlight the biological and pharmacological properties of CUR in addition to emphasizing aspects relating to the biosynthesis, encapsulation and therapeutic effects of the compound. The information contained in this review was generated by considering published information in which evidence of enhanced biological and pharmacological properties of nano-encapsulated CUR was reported. CUR has contributed to a significant improvement in melanoma, breast, lung, gastro-intestinal, and genito-urinary cancer therapy. We highlight the impact of nano-encapsulated CUR for efficient inhibition of cell proliferation, even at low concentrations compared to the free CUR when considering anti-proliferation. Furthermore nano-encapsulated CUR exhibited bioactive properties, exerted cytotoxic and anti-oxidant effects by acting on endogenous and cholinergic anti-oxidant systems. CUR was reported to block Hepatitis C virus (HCV) entry into hepatic cells, inhibit MRSA proliferation, enhance wound healing and reduce bacterial load. Nano-encapsulated CUR has also shown bioactive properties when acting on antioxidant systems (endogenous and cholinergic). Future research is necessary and must focus on investigation of encapsulated CUR nano-particles in different models of human pathology.
- Full Text:
- Date Issued: 2021
- Authors: Witika, Bwalya A , Makoni, Pedzisai A , Matafwali, Scott K , Mweetwa, Larry L , Shandele, Ginnethon C , Walker, Roderick B
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183161 , vital:43917 , xlink:href="https://doi.org/10.3390/molecules26144244"
- Description: There is a dearth of natural remedies available for the treatment of an increasing number of diseases facing mankind. Natural products may provide an opportunity to produce formulations and therapeutic solutions to address this shortage. Curcumin (CUR), diferuloylmethane; I,7-bis-(4-hydroxy-3-methoxyphenyl)-1,6-heptadiene-3,5-dione is the major pigment in turmeric powder which has been reported to exhibit a number of health benefits including, antibacterial, antiviral, anti-cancer, anti-inflammatory and anti-oxidant properties. In this review, the authors attempt to highlight the biological and pharmacological properties of CUR in addition to emphasizing aspects relating to the biosynthesis, encapsulation and therapeutic effects of the compound. The information contained in this review was generated by considering published information in which evidence of enhanced biological and pharmacological properties of nano-encapsulated CUR was reported. CUR has contributed to a significant improvement in melanoma, breast, lung, gastro-intestinal, and genito-urinary cancer therapy. We highlight the impact of nano-encapsulated CUR for efficient inhibition of cell proliferation, even at low concentrations compared to the free CUR when considering anti-proliferation. Furthermore nano-encapsulated CUR exhibited bioactive properties, exerted cytotoxic and anti-oxidant effects by acting on endogenous and cholinergic anti-oxidant systems. CUR was reported to block Hepatitis C virus (HCV) entry into hepatic cells, inhibit MRSA proliferation, enhance wound healing and reduce bacterial load. Nano-encapsulated CUR has also shown bioactive properties when acting on antioxidant systems (endogenous and cholinergic). Future research is necessary and must focus on investigation of encapsulated CUR nano-particles in different models of human pathology.
- Full Text:
- Date Issued: 2021
The use of response surface methodology to evaluate the impact of level 2 SUPAC–IR changes on the in vitro release of metronidazole and ranitidine from a fixed-dose combination tablet
- King’ori, Loti D, Walker, Roderick B
- Authors: King’ori, Loti D , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6391 , http://hdl.handle.net/10962/d1006313
- Description: The purpose of this study was to evaluate the effect of different levels of disintegrant (croscarmellose sodium, CCS), binder (polyvinylprrolidone K30, PVP–K30), and lubricant (magnesium stearate) on the in vitro release of metronidazole (MTZ) and rantidine (RTD) from a solid oral fixed-dose combination tablet. The excipient levels investigated were Level 2 changes in component and composition described in the Scale-Up and Post Approval Changes for Immediate Release (SUPAC–IR) guidance (1). Batches of tablets (1000 units) were manufactured by wet granulation using a Saral high-shear mixer granulator and a Manesty B3B rotary tablet press. Weight uniformity, friability, and disintegration of all tablets were assessed, and all batches complied with compendial specifications. The amount of drug released (Q) at ten minutes was dependent on the levels of CCS in the formulation, and the effect of PVP–K30 and magnesium stearate was dependent on the levels of CCS. Synergistic interactions between independent variables were observed for the Q10 value for RTD, whereas PVP–K30 and magnesium stearate exhibited an antagonistic effect on the Q10 values for MTZ and RTD. The use of response surface methodology facilitated an investigation into the effect of Level 2 component and composition changes, as described in SUPAC–IR, on the in vitro release of MTZ and RTD from a fixed-dose combination (FDC) solid oral dosage form (SODF).
- Full Text:
- Date Issued: 2012
- Authors: King’ori, Loti D , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6391 , http://hdl.handle.net/10962/d1006313
- Description: The purpose of this study was to evaluate the effect of different levels of disintegrant (croscarmellose sodium, CCS), binder (polyvinylprrolidone K30, PVP–K30), and lubricant (magnesium stearate) on the in vitro release of metronidazole (MTZ) and rantidine (RTD) from a solid oral fixed-dose combination tablet. The excipient levels investigated were Level 2 changes in component and composition described in the Scale-Up and Post Approval Changes for Immediate Release (SUPAC–IR) guidance (1). Batches of tablets (1000 units) were manufactured by wet granulation using a Saral high-shear mixer granulator and a Manesty B3B rotary tablet press. Weight uniformity, friability, and disintegration of all tablets were assessed, and all batches complied with compendial specifications. The amount of drug released (Q) at ten minutes was dependent on the levels of CCS in the formulation, and the effect of PVP–K30 and magnesium stearate was dependent on the levels of CCS. Synergistic interactions between independent variables were observed for the Q10 value for RTD, whereas PVP–K30 and magnesium stearate exhibited an antagonistic effect on the Q10 values for MTZ and RTD. The use of response surface methodology facilitated an investigation into the effect of Level 2 component and composition changes, as described in SUPAC–IR, on the in vitro release of MTZ and RTD from a fixed-dose combination (FDC) solid oral dosage form (SODF).
- Full Text:
- Date Issued: 2012
A stability-indicating high performance liquid chromatographic assay for the determination of orlistat in capsules
- Mohammadi, Ali, Haririan, I, Rezanour, I, Ghiasi, L, Walker, Roderick B
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, I , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article , text
- Identifier: vital:6407 , http://hdl.handle.net/10962/d1006480
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 µm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
- Authors: Mohammadi, Ali , Haririan, I , Rezanour, I , Ghiasi, L , Walker, Roderick B
- Date: 2006
- Language: English
- Type: Article , text
- Identifier: vital:6407 , http://hdl.handle.net/10962/d1006480
- Description: A stability-indicating HPLC method was developed and validated for the quantitative determination of orlistat in capsule dosage forms. An isocratic separation was achieved using a Perfectsil® target ODS-3, 250 mm × 4.6 mm i.d., 5 µm particle size column with a flow rate of 0.7 ml/min and using a UV detector to monitor the eluate at 210 nm. The mobile phase consisted of methanol:acetonitrile:trifluoroacetic acid (82.5:17.5:0.01, v/v/v). The drug was subjected oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compound and all degradation products in an overall analytical run time of approximately 15 min with the parent compound orlistat eluting at approximately 9 min. The method was linear over the concentration range of 0.02–0.75 mg/ml (r = 0.9998) with a limit of detection and quantitation 0.006 and 0.02 mg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay orlistat in capsules. Degradation products resulting from the stress studies did not interfere with the detection of orlistat and the assay is thus stability-indicating.
- Full Text:
- Date Issued: 2006
Analysis of chromameter results obtained from corticosteroid-induced skin blanching. I. Manipulation of data
- Smith, Eric W, Haigh, John M, Walker, Roderick B
- Authors: Smith, Eric W , Haigh, John M , Walker, Roderick B
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6424 , http://hdl.handle.net/10962/d1006559
- Description: Purpose. One of the unresolved issues in the FDA Guidance document for topical corticosteroid bioequivalence testing is the method of manipulation suggested for the chromameter data. The purpose of this study was to manipulate the instrumental data from a typical blanching study in a number of ways to investigate the appropriateness of these procedures for comparison with the subjective visually-assessed results. Methods. The human skin blanching assay methodology routinely practiced in our laboratories was utilised and the vasoconstriction produced by two corticosteroid formulations of different potency was assessed visually and instrumentally by use of a Minolta chromameter. The instrumental data were corrected for zero-time and unmedicated site readings. In addition, Euclidean distances were calculated using all data generated by the instrument. Results. Individually the a-, b- and L-scale chromameter values are imprecise and there is negligible vasoconstriction response recorded for the moderately potent formulation. Arithmetical manipulation of the data as suggested by the FDA does not appear to improve the quality of the data in any way. Euclidean distance analysis more closely resembles the visual data and appears to have better precision. Conclusions. It is clear that mathematical correction of chromameter data is unnecessary, especially since the instrumental data are extremely imprecise. Furthermore, the assessment of each individual chromameter index does not adequately characterise the blanching response profile. It is therefore suggested that Euclidean distance may be a better measure on which to base an analysis of bioequivalence than the truncated data set methodology currently suggested by the FDA.
- Full Text: false
- Date Issued: 1998
- Authors: Smith, Eric W , Haigh, John M , Walker, Roderick B
- Date: 1998
- Language: English
- Type: text , Article
- Identifier: vital:6424 , http://hdl.handle.net/10962/d1006559
- Description: Purpose. One of the unresolved issues in the FDA Guidance document for topical corticosteroid bioequivalence testing is the method of manipulation suggested for the chromameter data. The purpose of this study was to manipulate the instrumental data from a typical blanching study in a number of ways to investigate the appropriateness of these procedures for comparison with the subjective visually-assessed results. Methods. The human skin blanching assay methodology routinely practiced in our laboratories was utilised and the vasoconstriction produced by two corticosteroid formulations of different potency was assessed visually and instrumentally by use of a Minolta chromameter. The instrumental data were corrected for zero-time and unmedicated site readings. In addition, Euclidean distances were calculated using all data generated by the instrument. Results. Individually the a-, b- and L-scale chromameter values are imprecise and there is negligible vasoconstriction response recorded for the moderately potent formulation. Arithmetical manipulation of the data as suggested by the FDA does not appear to improve the quality of the data in any way. Euclidean distance analysis more closely resembles the visual data and appears to have better precision. Conclusions. It is clear that mathematical correction of chromameter data is unnecessary, especially since the instrumental data are extremely imprecise. Furthermore, the assessment of each individual chromameter index does not adequately characterise the blanching response profile. It is therefore suggested that Euclidean distance may be a better measure on which to base an analysis of bioequivalence than the truncated data set methodology currently suggested by the FDA.
- Full Text: false
- Date Issued: 1998